PP07 not importing into Captivate 4 as I need it to...HELP

In Captivate 3 when I import a PP slide it imports it into captivate as an object on the Captivae slide. However, in Captivate 4 it does not import it as an object on a slide, but the slide itself. I need it to import as it did in C3...suggestions?
TIA,
cgoebel

Hi there
I'm thinking that even those steps won't solve your issue. You might first try to insert a Click Box object to pause the slide before it ends. Captivate 4 introduces a new wrinkle with this feature in that when a slide ends it seems to always do the fade out regardless of other settings. So the only way I've discovered to prevent that is to use something to pause the slide before the fade out occurs.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

Why do some AVI files not import into iMovie?

Some of my AVI video does not import into iMovie. When I try, it gives me a non-specific error message. Is there a way I can import it? Other AVI files import with no problem.

AVI is a container, not a format; the audio and video in an AVI may use any codec, and some codecs can't be used in Mac OS X. Installing Perian may help.
(34138)

.CR2 will not import into iphoto 08 7.1.5

I have a few hundred photos taken by a friend that i am trying to import into my iphoto library.
Getting an unrecognizable file message.
I shoot on a Canon XSi in RAW and have no issues importing to iphoto, Apature or photoshop....
her images were shot on a Canon TSi in RAW and will not import into any of my programs.

The fact that you can use the Raws from your XSi is of no relevance.
The Raw from every model of camera is different. Note: that's every model not every brand. So, the NEF produced by a Nikon D40 is not the same as the NEF produced by a D60, the CR2 produced by a Canon 350 is not the same as the CR2 produced by a Canon 400.
Changing the Raw specification is one of the ways of upgrading the cameras.
IPhoto and Aperture support - or don't - the same cameras.
Regards
TD

Lightroom CC 2015 HDR merge not importing into Catalog

When I use the new HDR merge in LR CC 2015, the new xxxxx-HDR.dng image is created but not imported into the catalog. All of the demo videos I've watched show the image being immediately imported into the catalog and visible on the filmstrip. Suggestions? TIA for your help.

Here is a +/- 3 EV HDR that both LR6/ACR9 and PS-HDR Pro do a reasonable job with, where the only adjustments are clicking Auto in LR:
Here are the three images, EV+0, EV-3, EV+3, where to get a reasonable view out the windows, the interior was nearly black and to get a reasonable view of the interior, the windows are nearly white.
Here is a side-by-side of the EV+0 shot with various adjustments applied vs the LR6/ACR9 HDR result with Auto clicked. Tonally they look similar. What is better with the LR6/ACR9 version is the view out the windows has more detail and less clipped, and the noise in the darker areas is much better, meaning LR6/ACR9 used more of the brighter image for the floor and more of the darkest image for the view out the windows, which is exactly what HDR is supposed to do:

H.264 will not import into DVDSP?

So I have been searching several discussion forums and the question I have seems to pop up in each of them, but is never answered???
Simply put, I have a FCP 6 project sequence that is 720p24frame which is an editing timebase of 59.94 with an aspect ratio of 960by720.
This is an 8.5 minute piece so I know that it will fit onto a regular DVD-R.
So I go through compressor and compress it into both an MPEG2 and H.264 - each at an HD bit rate.
Then I set up an HD project in DVDSP and try to import the two. The MPEG goes in fine and burns with no problems. My BlueRay/HDDVD combo player is on its way in the mail so I can't test it, but it will not play in my SD DVD player. Then I try to import the H.264 - It states something to the effect of not a compatible format....
That is my question - Why will the H.264 not import into an HDDVD project in DVDSP - all of the settings are correct from the initial edit - through compressor - through DVDSP.
Thank you for anyone who can help - we have a large festival coming up that has the option of 35mm or HDDVDs (we cannot afford a print).

So...this issue is somewhat solved.
I have done several exports using the provided H.264 presets then tweaking them each to my own set specifics. There are four places in the formats sections of compressor that have H.264 as a codec - one of these is for iPod and web so I disregarded that one completely.
I always applied the same settings as to have a control base when doing this experiement - I haven't done a science project in probably 15 years. I also pushed the bit-rates to the highest level.
After many hours in and out of compressor and DVDSP, I found only one of of the presets loaded properly into DVDSP - the 60min under HDDVD H.264 preset (altered to my higher bit-rate)
I am still waiting on my player to try it out, but it did burn fine. This is all so strange since all of my own settings (bit-rate) and other data was constant.
Oh well...at least I've got one test completely burnt.

Problems with iTunes 8: NBC .m4v shows will not import into iPhone v2.02

I am a little confused. I have downloaded some NBC shows that are.m4v format, yet they will not import into my iPhone with iTunes 8. I receive the following error msg in iTunes when trying to sync:
Example "Mr. Monk Buys a House" was not copied to the iPhone
because it cannot be played on this iPhone.
Am I doing something wrong? Do I have to convert shows from iTunes to a different format before I can watch them?
PS Same error msg occurs with iTunes Podcast .mov format.
Any suggestions?
Txs

Well, after a little research in the iTunes Support Browser, Apple finally made the answer available.
Though Apple designs all products in iTunes to play on iPod type devices, the new HD programming will not.
The programs that are being "given away for free" are being promoted in HD format, and that's where the links on the iTunes page takes you. The iPhone 3G cannot handle HD programming, and thus the error message. (why couldn't they just have said that in the error msg, rather than have me go and look for half an hour. As my mother used to say, if it looks too good to be true, it probably is.
A couple of pointers for the free, give-away HD shows from NBC (iTunes way of telling NBC welcome back). These will not work on the iPhone 3G v2.02:
Mr. Monk Buys a House (HD)
Merit Badge: Pilot (HD)
30 Rock: Secrets and Lies (HD)
Battlestar Galactica, Season 4: He That Believeth in Me (HD)
etc.
Yes, if you look close enough in the show description, they are also making these available free in SD. Hope this research saves somebody a headache from buying the wrong programs.
You're welcome from a friend in Texas!

Animations imported into Captivate 5.5 not playing correctly.

This issue started when I tried to open a Cp 5 project in Cp 5.5. The animations don't play at all if the "Synchronize with Project" option is On and the anmiation starts at 0 sec on the timeline. Also, there is a visible "blink" between animations on the same slide and between slides.
I've been using Cp 5 for about a year and have worked out my issues with it so these are the things that AREN'T wrong: The transitions for slides and swfs are set to "No Transitions," there is no space between swfs on the timeline that would be making the "blink," there are no blank frames at the end of the timeline in the swf files(inside of Flash), the swfs are AS3, they are only as long as their original timeline, my Preferences are set to no fades on Start and End slides, and my timelines do not extend beyond their content to show white space.
The files work fine in Cp 5. The file animation links are also randomly missing/broken when brought into Cp 5.5 and even after I re-establish them, they periodically turn red (not up to date).
So I figured, "Maybe I can't work with previous version files. I'll just start a new blank project in Cp 5.5." Right? . . . Not right. Swfs still aren't visible when published if they are set to "Synchronize with Project" AND start at the 0 sec mark. They still "blink" between swfs and slides. So maybe I can't use Flash 5 files in Cp 5.5 either. If that is the case, this upgrade was a waste of time and money and should not have been released until these MAJOR issues were resolved.
Someone from support is looking into it, but so far the only advice that I got was "Turn the Sync option off and fade into your next animations." What?! The sync option is very important because that keeps your animations playing correctly when people scrub the playhead. If Cp 5.5 is programmed to do that automatically, then why keep the option button? If not, do you really expect me to NOT want my animations to play consistently when people drag around the playhead? As for the fading, maybe fading out after every animation swf is not an option for me, maybe I need it to be seamless. And to that I was told, "Put all your animations together in one Flash file." Duh, but that was how this needing Cp to assemble my separate swfs started in the first place. If any of you have tried importing 3D rendered pngs into Flash, you know that you can only have so many frames before the program can't handle the load and crashes. I can only support aoubt 250-300 frames of optimized pngs before Flash crashes on me and thats WITH 16GB of ram on a new 64 bit operating system.
If anyone has had this issue and found a fix or some kind of pending patch, please let me know, because by now, I'm wanting a refund.

Captivate 5 was a total rewrite from the Captivate 4 software architecture and it introduced a subtle but fundamental change in the way that Flash animations were handled in Captivate published content.
Basically the change means that if your animation was built down a level or two inside a symbol rather than on the main timeline at the top level, then you will find that Captivate 5 or 5.5 loads and executes the animation on the first slide of the movie. This means that by the time you get to the actual slide where you WANTED the animation to perform it's magic, it's already run and finished.
In Captivate 4 this did not happen. The animation was not really loaded until later in the movie timeline so as to be ready for the slide where it was required. It didn't matter if the animation was buried inside a symbol or not.
You have two choices:
Revamp your animation so that it all happens on the main timeline in the Flash FLA file that generates it.
Get your Flash programmer to add some ActionScript code to the animation so that it does NOT play completely when first loaded at the beginning of the project at runtime.
I agree that Captivate would have been regarded as less of a beast if this change had NOT been made, as users only find out about it AFTER upgrading projects with animations built as symbols. However, I have to trust that if the change was introduced, there must have been a very good reason.

Bookmarks Safari 5.0.5 will not import into Firefox 17.0 with Mac OS 10.6.8

I am on Mac OS 10.6.8. When trying to import bookmarks from Safari 5.0.5, they will not import/display into Firefox 17.0.
I have tried the following from the bookmark menu:
Import Bookmarks from HTML...
Import Data from Another Browser...
No bookmarks display when I click ok for each, even after quitting and restarting firefox.
Am I doing something wrong?

Hello nureste, try the next : open Safari> File > Export Bookmarks and save the html file in your choice location, then open firefox, and as you known, Import Bookmarks from HTML... choose the html file with the safari bookmarks.
EDIT: see also : [https://support.mozilla.org/en-US/kb/import-bookmarks-html#os=mac&browser=fx17 Import Bookmarks from an HTML file - mac]
thank you

AVI Files not importing into CS4 from DVD

I have the DVD disk for Premiere Pro CS4 Classroom In A Book and all the avi files have only sound and when imported into Premiere Pro CS4 a missing codec error warning appears and the file will not import.
I have to say this problem only occurs with my 27" iMac and not at all with a MacBook Pro or a 20" iMac. I have tried repeatedly to copy the DVD to the 27" iMac but the problem still persists.
*+Now this is the really weird bit+:*
Using Screen Sharing from another mac, the files are normal. All other avi files are also normal on the 27" iMac.
I wondered if anyone can throw any light on this problem?
Joe
Message was edited by: Joe Cowley
null

HarrisS13 wrote:
Thanks ad2345.
I tried a different converter and also changed the playback preferences -which was down at 44.1kHz- up to 96kHz as I know the hi res files are supposed to be up at this level.
Not sure if it was one or the other of your suggestions, or both, but it has worked, so many thanks for your quick and effective help!
Regards,
Steve
Steve,
Glad it helped. Enjoy the music!
Ed

Some of my clips from my camera are not importing into iMovie`

I just got a new video camera and I started using iMovie for my first time with it. It's a Panasonic DVD video camera. The first time I loaded my DVD into my computer with it, it imported all of my clips just fine. But now it seems, random clips will not import. When I get my import screen, where I can check and uncheck movies from my DVD to import into iMovie, some clips have thumbnails and import correctly. Other clips have no thumbnail, but instead just have the little "filmstrip" graphic on them. iMovie still knows how many seconds those "mystery" clips are, and it still acts as if it is importing them when I check them. However, they don't show up in iMovie when I go to edit them. They are not blank clips, they simply just don't show up. However, on my camera, ALL of the clips play fine.
Why is iMovie not gathering thumbnails/importing certain clips but it gathers thumbnails/imports the others? I know the disc and the camera is fine because the camera will play them, sound and video. What is up with my iMovie/computer?

I'd like to add that after I import these clips without thumbnails, iMovie does give me an error and say that they could not be imported. No explanation as to why, though. Again, they play fine on my camera.

WMV audio not importing into Premiere Pro CS5.5/CS6

I have two Win7 machines running CS5.5 and CS6 respectively. Prem Pro imports and edits the video sequence of a batch of wmv files recently referred to me for processing but does not show the audio at all. The files play perfectly in Windows media player. I presume there is a codec somewhere on my machines that wmplayer is using but how can I get Prem Pro to use it??? I don't usually use WMV but I have found some other wmv files which import nomally i.e. sound track included. Loading the files into Handbrake lists the audio for the successfully imported files as Source: English (wmav2) (2.0 ch) Codec: AAC (faac) Bitrate: 160. The files that Prem Pro does not import the sound for, list identically except that the source is shown as Unknown rather than English. All other details (wmav2 etc exactly the same.
Thanks

I have two Win7 machines running CS5.5 and CS6 respectively. Prem Pro imports and edits the video sequence of a batch of wmv files recently referred to me for processing but does not show the audio at all. The files play perfectly in Windows media player. I presume there is a codec somewhere on my machines that wmplayer is using but how can I get Prem Pro to use it??? I don't usually use WMV but I have found some other wmv files which import nomally i.e. sound track included. Loading the files into Handbrake lists the audio for the successfully imported files as Source: English (wmav2) (2.0 ch) Codec: AAC (faac) Bitrate: 160. The files that Prem Pro does not import the sound for, list identically except that the source is shown as Unknown rather than English. All other details (wmav2 etc exactly the same.
Thanks

Website ical feed not importing into ical (but works in other programs)

We have a website that contains timetables, and publish ical (.ics) feeds for users so that they can import their timetables into their own calendar software. We have a few users who are saying that ical will not import our site's ics feed. Either just one event (of many) gets imported or none of them do. We've imported these feeds into google calendar, sunbird & outlook without any problems, and have ran this same user's feed through an ical validation tool and it passes without any errors or warnings.
Where can I find out what iCal is having trouble with? Is there an error log somewhere I can get the users to access? Are there any parts of the ics format that ical is particularly flaky with? How can I find out what's wrong? Any suggestions would be appreciated!
thanks

I'm having this problem too... can't figure out what is wrong.
Outlook & Google Calendar can import it
It validates according to:
http://severinghaus.org/projects/icv/
If there is only one event iCal accepts it, but if there are more than one, it gives an error message (a very unhelpful one at that).
There is a link to the iCal file here:
http://www.g33ks.dk/files/dfi_calender.ics

Can not import into iMovie

I installed iTunes 6.0.1 and now the music I imported into iMovie will not play. I get a message that I need to go to Itunes and authorize my computer. It then takes me to itunes I fill in my ID and it tells me I have authorized 4 out of five possible computers. But the music will not play.

DRCARR,
Did you also install the current versions of QuickTime + iMovie?
As a workaround burn those refusing tracks to an AudioCD and re-import them for use in iMovie

File name not importing into iPhoto

I keep my photos on an external disk and import them from that disk into iPhoto. When I import, sometimes the file name is imported into the caption field and sometimes it does not.
Any ideas why? I have search for others posts but can't find any. I did check the permissions of the files representing both results and the permissions are the same.

What is displayed in the title field under the thumbnails?
Have you tried selecting the offending photos, going to the Photos->Batch Change menu and selecting Title to File Name option?
Click to view full size

Mini-DV footage does not import into IMOVIE/ Camera not recognized

Sony Mini DV tapes do not import footage using firewire. Camera is not recognized. I have done all the troubleshooting suggested. unplug, plug in, turn on, off, etc. I have bought new firewires and tried to import with many different mini-dv camcorders, sony, panasonic. It worked before, but not now.
I teach in a multiple mac computer lab and have 20 computers, non of them import, although they did earlier. Student-use film lab. HELP!

Hi Harm,
Yes, that's exactly what I do with my EX3 footage too - ignore the XML error messages. That's a bit buggy in it's own right, well, not buggy but it should really recognise the EX folder/file structure and ignore the XML files - maybe one for a feature request!
The 350 is a great camera - very much more sensitive and lower noise than the EX3.
I still like the EX3 though, as it's small and light (relatively!) - the 350 is very light though in comparisson to other shoulder mount cameras. Nice low power consumption too
Some things I miss from the EX3 - like the joystick menu button and the direct edit of parameters on the VF that the EX3 has. I also like the EX3 picure profile system over the 350 way of storing profiles (more similar to the 700 I believe).
Cheers,
Paul.

PP07 not importing into Captivate 4 as I need it to...HELP

Similar Messages

Maybe you are looking for