PPC G5 Drivers PCI Cards need to delete the Driver

Hi
Does anyone know where the Drivers are located in a PPC G5 for the PCI Cards
I have one that is coming up called:
bcom5714 (card name Apple 5714) which is not installed but it says the driver is installed.
its in slot GIGE
Bus: PCI
Driver Installed: YES
Type: NETWORK
CARD: Apple 5714
Just need to find this driver - AND DELETE IT
Thanks if you know where I can find the file

Hi BDAqua
You Back !! - Hi
Thanks for looking at this one
I have this message in Console - and for some reason the G5 Quad does not want to sleep
This message comes up stopping it from going to sleep
What the story ?
Thanks BDAqua in advance
kk69

Similar Messages

Adaptec AVA-2906 is this the PCI card needed to connect internal HD's?

Hi, I have an Adaptec AVA-2906, is this the PCI card needed to connect internal HD's? It has a socket on the board that looks like the type of plug used to connect hard drives. On the backplate it has a socket with 25 pin connecter with screw holes like on monitor plugs.
If this is the right device can I fit a HD bigger than 120gb?
Thanks
Robert

(A) do I have to fit a SATA card to put a third hard
drive inside the G4 or is there a ribbon connector
that has 3 plugs on it, like the one in that came
with the machine with two plugs that plugs into the
edge of the motherboard?
Without an ATA or SATA card you can install upto two hard drives. These drives are connected to the ATA controller built into your computer's logic board. It can only support two drives, a master and a slave. You can't buy a ribbon cable with three plugs and attach three drives.
(B) Looking at pics of the SATA plug connectors they
appear to be a lot smaller than the ribbon cable ones
in my Mac, do the ATA hard drives come with this
small type of connector?
SATA drives use a different data connector and a different power connector, although some SATA drives also come with a legacy molex power connector. The data connectors aren't interchangeable, ATA drives use a wide ribbon cable only, SATA drives use the much narrower cable only.
(C) Is there any other way of putting another HD
inside if I dont exceed 120gb?
In theory you could add a third hard drive to the zip bay, beneath the optical drive. However, it's not recommended by Apple due to possible heat issues. The ATA bus used for the optical drive and zip drive is also slower and may affect performance.
(D) Can 5,400 rev be mixed with 7200?
Yes, the spindle speeds and cache sizes are purely internal to the drive. The computer and OS probably don't even 'know' or 'care' about them.

Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request

Hello Microsoft Community,
I'm trying to install the following:
Product ID: Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card
Name: ORiNOCO Wireless PCI Network Card
Device ID: PCI\VEN_168C&DEV_0013&SUBSYS_0A1014B7, PCI\VEN_168C&DEV_0013&SUBSYS_0A6014B7.
Problem: None of the drivers for Windows 7 X64 has worked to install in devmgmt.msc Please advise where Windows 7 Drivers can be downloaded.
[Please note I've tried the following and had no success: 4.2_JP2_Vista , 4.2_Vista , 4.2_whql , ORiNOCO_v31219 , V2.2.0 software , wpn311_2_0_setup]
I have submitted the following to Proxim Tech Support :
Support Request Submitted: 20284
Thank you! Your support request has been submitted and one of our technical support members will be in touch shortly.
Details
Subject
Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request
Status
New
Severity
Medium
Type
Support Request
Reason
Driver / Software Installation
Request Date
Jan 12, 2015 05:31:26 am PST
Product
Serial Number
Warranty / ServPak
N/A
ServPak Reference
Description
Hello Proxim Tech Support, Product ID: Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Name: ORiNOCO Wireless PCI Network Card Device ID: PCI\VEN_168C&DEV_0013&SUBSYS_0A1014B7, PCI\VEN_168C&DEV_0013&SUBSYS_0A6014B7. Problem:
None of the drivers for Windows 7 X64 has worked to install in devmgmt.msc Please advise where Windows 7 Drivers can be downloaded. Thanks, Kent C.
Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request
Status
New
Severity
Medium
Type
Support Request
Reason
Driver / Software Installation
Request Date
Jan 12, 2015 05:31:26 am PST
Product
Serial Number
Warranty / ServPak
N/A
I will update thread with their reply as nothing, even Driver Genius Professional 11 has located the actual working driver. Once an update is verified, I will post back to this thread since I couldn't find the right answer online.
THIS BTW I TESTED IS INCORRECT [You may verify if you don't believe such] :
http://www.experts-exchange.com/Software/System_Utilities/Q_26292317.html <- That didn't work [Found driver online via Google] and link isn't working anymore in that post.
This is related to this thread here:
https://social.technet.microsoft.com/Forums/windows/en-US/668ac1f0-4560-4bd3-8848-c4fcdc70c10a/wanted-atheros-driver-for-windows-7-x64?forum=w7itprohardware
Any assistance would be appreciated! Thanks..
Kent C.

Hi,
About this issue, you need conatct proxim support to confirm if it could works fine in WIndows 7 platform and how to get the proper driver package.
Karen Hu
TechNet Community Support

I need to delete the entire browsing history so when i type in a webpage it soes not bring up previuosly visited sites. deleting the history does not do this. any one know how to do this

I need to delete the entire browsing history so when i type in a webpage it soes not bring up previuosly visited sites. deleting the history does not do this. any one know how to do this

Judy-
If Private Browsing doesn't do it, try Settings-Safari-Advanced-Website Data-Remove All Websitre Data.
Or changing Settings-Safari-Autofill to OFF.
You might also try Settings-Safari and Clear History and Clear Cookies and Data.
As you can see, there are several controls for Safari. Which one works depends on what your problem is.
Fred

I need to install Mozella Firefox 2.0 to fill out a form that is not supported with the newer version that is installed on my PC. Do I need to delete the new version before using the older version?

I need to install Mozella Firefox 2.0 to fill out a form that is not supported to input info from the newer version that is installed on my PC. Do I need to delete the newer version before using the older version? If so, how do I delete the new version and install the older version?

If you just need it for one site you can use the portable version of Firefox 2 instead. You can install the portable version on a USB key, or if one is not available choose the custom install and install it somewhere on your hard drive. The portable version will not interfere with your current version of Firefox. You can get the portable version from http://portableapps.com/apps/internet/firefox_portable - the link for Firefox 2.0.0.20 is near the bottom of that page.

If I am downloading a new version of an album that I already have in itunes, do I need to delete the older version before downloading the new?

If I am downloading a new version of an album that I already have in itunes, do I need to delete the older version before downloading the new?

No, you don't need to.

I am creating a request for proposal form and I need to add a commission structure field. I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?

I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?

It sounds like what you are trying to do is edit the choices in a likert field to something other than the default radio button. This is not something that you can do in Formscentral at this time.
Andrew

Do I need to delete the garbage can?

I am new to the iphone and have the iphone 4. After I send photos, contacts, etc to the garbage can, do I need to delete the garbage can? Thanks.

No.
http://manuals.info.apple.com/enUS/iphone_userguide.pdf

Need to delete the data before the INIT runs for an infocube.

I have creates a infocube and loading the data through delta update.
The dats is for 12 periods.
But in my reporting wrong data is showing for period 3. So I want to run the Inti update once for period 3.
For doing this do I need to delete the already existing data in the infocube for period 3 or will the new init replace the old data for period 3.
Please help me in answering

You need to delete 3 months data first using selection deletion option in cube and do a full load for this 3 months again.
Ravi

My apple id for icloud is linked to an invalid email address and i do not have the password for the account. I need to delete the account to access my icloud on my iphone. any ideas?

my apple id for icloud is linked to an invalid email address and i do not have the password for the account. I need to delete the account to access my icloud on my iphone. any ideas on how to override this issue?

If you updated the old ID at one point to create your current iCloud ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I need to Delete the empty space page of report

I need to Delete the empty space page of report
http://imageshack.com/a/img540/191/nrOwz6.jpg
I Need Help!!
Thanks

Hi yha10,
Per my understanding that you want to add one textbox at the bottom of the tablix and make it display as the last on each page after the tablix, you have try to add the page footer but if there is little record in the report you will got some space between
the report footer and the last row of the tablix, right?
If you don't want to display the space and I suggest you don't use the report footer and you can take reference to the details information below to display the information as the last row of the tablix on each page:
Right click the Details in the Row Group and select to Add Group-->Parent Group:
and add this expression in the Group By:
=Ceiling(RowNumber(Nothing)/10)
(10 is the number of rows you want to display on each page)
Right click the row group to select the "Group Properties" and add page break by check the "Between each instance of a group":
Right click the first column which the Group located and select the Insert Row-Inside Group-Below:
Select the Entire Column1(Group) and delete columns:
Merge the entire last Row and type the information "I need to show on all the page" in it:
If you still have nay problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

I have a Two VIC Card on Blade B200 the driver version is 2.3 need HyperV-2012 Vfabric

I have a Two VIC Card on Blade B200 the driver version is 2.3 need HyperV-2012 Vfabric
it gives me unsupported driver.

B200-M1, M2 or M3, which UCSM version, did you try
http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

How do I delete MacKeeper off my Harddrive? I downloaded the software and did a 'trial' fix (cleaning) but never signed up for a license. (Do I need to delete the software if I never subscribed yet to any use of it, and if so, how?)

How do I delete MacKeeper off my MacBook Pro Harddrive? I downloaded the software and did a 'trial' fix (cleaning) but never signed up for a license for full use. Do I need to delete the software if I never subscribed yet to any use of it, and if so, how?

Remove "MacKeeper" as follows. First, back up all data.
"MacKeeper" is a scam with only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
If you have incompletely removed MacKeeper—for example, by dragging the application to the Trash and emptying—then you'll have to reinstall it and start over.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Restart the computer.
☞ Quit MacKeeper before dragging it to the Trash.
☞ Don't empty the Trash. Let MacKeeper delete itself.
☞ Don't try to drag the MacKeeper Dock icon to the Trash.

I had an Ipod touvh given to me and need to delete the acct. name on it and rename the Ipod. how do I do this

I have an Ipod touch that was given to me recently and I need to delete the acct. name and rename the device.
How do I do this???

See the linked I provided in my first post above. However, if you have already updated the device in iTunes it should do the same thing, erasing all content on the device and resetting all settings since you have connected to a new/different iTunes library from what it was originally set up with.
If after the restore, the same Apple ID is still showing up (the old one), head to Settings -> Store and sign out of that account and then sign in using your own Apple ID credentials.
B-rock

HT203242 I've tried all of the suggested solutions, but I still can't get my cd drive recognised. If I delete the driver and rebot, the cd drive appears, but as soon as the driver automatically installs, the driver disappears into the Q: drive

I've tried all of the suggested solutions, but I still can't get my cd drive recognised on my laptop. If I delete the driver and reboot, the cd drive appears, but as soon as the driver automatically installs, the driver disappears into the Q: drive, which is not accessible and neither is the CD drive

I had the same or similar problem after installin iTunes 11 on my Acer Laptop with Vista. The new iTunes ran but I
completely lost access to my CdRom/DVD drive. Error Code 19 was displayed in Windows Device Manager. Found out
this is more widespread of a problem than expected. After trying several forum recommended fixes, the Only thing that gave me back my CdRom drive was doing a Windows Restore to a date prior to iTunes 11 install. I got my drive back but it also restored me to the prior 10.0.7.21 vers of iTunes which no longer worked due to missing files. iTunes help
recommended a Reinstall. I am reluctant to do that for several reason. That's where I am at for now until I find out if there are any other risks for using iTunes 11 vs. Registry Errors vs. Losing access to my CdRom drive. Brad

PPC G5 Drivers PCI Cards need to delete the Driver

Similar Messages

Maybe you are looking for