PPC G5 Mac OSX 10.5.8. what to do with nonworking Firefox 3.6.16

Firefox 3.6.16. does not work, it cannot be opened at all
on my 4x2.5 GHz PPC G5, MAC OSX 10.5.8.
and on my iMAC PPC G4 MAC OSX 10.5.8.
What to do? Please tell me your advice.
Thank you in advance.
Sincerely
Peter Wellner
1022 Budapest, Bimbo ut 23.

To sync an iOS 7 device you need to be running iTunes 11.1.1; iTunes 10.6 is way too old and won't work. You need to install iTunes 11.1.1, but to do that you need to be running at least Mac OS X 10.6.8.
So you need to do the following:
1. Upgrade your Mac to at least OS X 10.6.8 (later preferably, but 10.6.8 at the miniumum).
    a. Check first to see if your model Mac can be upgraded, check that it has enough RAM and so forth (2GB at the least, more if possible).
    b. If you can't upgrade your Mac, or don't want to, then you will have to buy a new Mac with the latest version of OS X (currently 10.8.5, soon to become 10.9) and iTunes 11.1.1
2. Install iTunes 11.1.1 on your newly upgraded Mac.
3. Sync your iOS 7 iPhone with iTunes.

Similar Messages

  • What can I do when I try to access a URL and get the message "MAC OSX doesn't recognize internet addresses starting with "c:"?

    I recently tried to download a pdf file from a website in the UK.  Up popped a message saying the website could not be accessed, followed by this message: "MAC OSX doesn't recognize internet addresses starting with "c:".  I was able to access the website easily (its domain was "www") and the page listing the pdfs, but could not download a pdf.  Of course," c:" appears not to be a valid domain name, but why would anyone use "c:" in place of a domain name in their URL?  And what can I do about the problem?  I'm using Snow Leopard 10.6.8 and Safari 5.1.10, but also have Firefox and Chrome loaded.  Thanks.

    An address starting with c: wouldn't be any kind of domain name. C: is the drive lettering system DOS and and later uses. By default, A: and B: are reserved for your first and second floppy disk drive. All hard drives are then named C: through Z:, if you have that many. C: is normally your startup disk.
    Anyway, their PDF file is incorrectly linked to a file directly on the C: drive of someone's computer. It's not going to work no matter what you do.

  • What software can I update with on my powerpc g5.  Running Mac osx 10.4.11, What software can I update with on my powerpc g5?  Running Mac osx 10.4.11

    What software can I update with on my powerpc g5.  Running Mac osx 10.4.11, What software can I update with on my powerpc g5.  Running Mac osx 10.4.11.  Since it doesn't have Intel dual core processor, can't do Snow Leopard right?  Is there anyway to upgrade the software?

    Snow is Intel only.  You could get Leopard 10.5 by purchasing a Retail (black) Disk off eBay or calling Apple Service and ordering one from them.  That would allow you to run Safai 5 and iTunes 10, I believe, but would lose Classic support in the process.

  • HT1338 i have mac osx 10.5.8 what can i do to get newer version? I tryid almost everything. I am not so god in this. Please help me:-(

    i have mac osx 10.5.8 what can i do to get newer version? I tryid almost everything. I am not so god in this. Please help me:-(

    The first thing is read:
    General Requirements
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
    Some features require an Apple ID; terms apply.
    Some features require a compatible Internet service provider; fees may apply.
    Supported
    Models
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)

  • I am running Mac OSX 10.10 -- is this system compatible with CS3?

    I am running Mac OSX 10.10 -- is this system compatible with CS3?

    Simplest is to move to Creative Cloud. You could buy CS6 but there is no upgrade path. You’ll have to pay full price and you’ll already be two full versions out of date.

  • Please advise where is the page that lets me choose what I share with Mozilla / Firefox is.

    Mozilla - Firefox Choose what I share
    https://support.mozilla.org/en-US/questions/new/desktop/privacy-and-security
    Occasionally my computer seems to go off on a frolic of its own - lights on, whirring, very slow to respond to my instructions, etc. Recently I noticed a message in the bottom right corner of my screen along the lines 'Choose what I share' There was an explanation that Mozilla sent Firefox information [or vice versa] and a claim this somehow made my life better. I thought I would choose what I share but the message disappeared and I have been unable to find the relevant page.
    Please advise where is the page that lets me choose what I share with Mozilla / Firefox is.

    OK a bit more detail. I have tried to avoid or explain jargon. Note the blue bits in the text are clickable [http://en.wikipedia.org/wiki/Hyperlink links] to other documents/sites
    Feedback:
    If you use the input/feedback button the information you send will be public, but that is the point of sending it.
    That is were you send short comments about Firefox. More than one way of doing this:
    * a button on the browser
    * the ''[Suggestion Box]'' option on some of these pages
    * or the link
    ** https://input.mozilla.org/en-US/feedback/
    An example of some of the public comments
    *https://input.mozilla.org/en-US/?happy=1&platform=Windows%207
    Crashes:
    You will need to send that information if you wish to get help with crashes. The email address is optional (and I do not think it is public).If you file a bug however you will need to provide an email address that will be publicly displayed
    [http://en.wikipedia.org/wiki/Crash_%28computing%29 Crashes] are when Firefox suddenly breaks and stops working entirely. If you are lucky it may restart again but it may continue to crash or be totally unusable.
    [http://en.wikipedia.org/wiki/Software_bug Bugs] in this context are the discussions by the experts fixing or modifying Firefox, often initiated by a bug report from an end user.
    If you need help with your crash Mozilla needs some techie information about the crash before they can do anything about it or help you.
    [[Send performance data to Mozilla to help improve Firefox |Telemetry]]:
    At present, I think, you will only see the information yourself if you submit.
    This is a feature that send some basic information about Firefox performance. It was introduced after it was realised Firefox was doing some things very badly, but the full extent of the problem had not been quickly identified.
    Firefox Health Report:
    Experimental feature still in development
    Aimed at helping the end user fix Firefox.
    You will find all sorts of information in these blogs
    * https://blog.mozilla.org/privacy/
    but unfortunately they do contain jargon and are written for those already interested in the subject, who know something of the features of Firefox and related software.

  • Quicktime Player states "You can't open the application QuickTime because the Classic environment is no longer supported."  I just installed Mac OSX Snow Leopard.  What do I need to do?

    I just installed Mac OSX (10.6.8) and can not get Quick time player to work.  When I go to the Apple site to download a version that will work, it states that Quick Time Player automatically comes with OSX.  What do I need to do to use Quick Time Player with 10.6.8

    Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
    http://support.apple.com/kb/dl923
    Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link  even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
    (Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)

  • Just updated to Firefox 4.0 and can't download former 3.6 version as suggested by others...what can I do since I have Mac OSX 10.4.11 and can't download older Firefox version?

    When I went to the website suggested in the forum to download the older 3.6 version of Firefox, there was nowhere I could click to download this older version. Firefox recommends and had a place to click on downloading 4.0. How can I get the best of both without having to upgrade my Mac OSX? Please send me a reply ASAP! Thanks!

    Firefox 4 requires at least OS X 10.5. You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • I have mac osx 10.6.8, what is the difference vs snow leopard

    i have mac osx 10.6.8 should i download snow leopard, I cant not open excel, error message appears, and they recommend dowload software again. I compleated all actualizations available...

    JFCT wrote:
    i have mac osx 10.6.8 should i download snow leopard, ...
    OS X 10.6.8 is Snow Leopard.

  • Cannot install Mac OSX Snow Leopard on Macbook Pro Unibody with a new SSD

    Hi, I just bought a SSD (OCZ Vertex LE 120GB) to replace the stock SATA HDD. The problem is that the Mac OSX installation fails. I tried a lot of times with no success. Both clean install from DVD or restoration from a Time Machine backup fails.
    The problem doesn't happen if I put the same SSD into a PC to install a Linux or Windows. I've read something saying the problem to be at EFI 1.7, SATA bus and even SATA cable in the Macbook Pro. Can anyone help in this issue?

    IgorOzz wrote:
    Hi OrangeMarlin, thanks for answering and trying to help me in this issue. Well, The SDD is well formated by Disk Utility and GUID partition as well. I tried to clone my HDD to the SDD by using the Disk Utility RESTORE option. By doing this I could boot up from SDD but somethings didn't work well (iPhone crashed at every start), Finder sometimes, and other apps...
    Maybe the disk utility restore option isn't the best way to do that. I'm gonna try the following steps:
    - Carbon Copy to clone my HDD to SDD;
    - Update SDD FW to the last one (but I need to install it on a Windows machine first);
    - Downgrade EFI FW back to 1.6 (not sure if I'll proceed to this step).
    I was thinking about SATA bus and cables because I've read some issues pinpointing to this as the culprit, since the Macbook's SATA wouldn't be able to handle 3Gbps SATA II speeds.
    Now, a little question: Why you say to be not recommended to install the new drive internally? What if, after using the SSD or HDD for a while and the system crashes I need to reinstall Mac OSX? I think it's supposed to be installed from the scratch by the DVD installer. Isn't it?
    Again, thanks... and waiting more replies...
    Do one step at a time, and I highly recommend not "downgrading" the EFI. The unintended consequences might make you throw your MBP out the window.
    Yes, use Carbon Copy Clone. Then try to boot from the cloned drive. Hold Option at startup, and it will give you a choice.
    If it works, then put it in your MBP. If it doesn't boot, then go to step two, repeat clone, and try again.
    My 2010 MBP runs at 3Gbps. I think prior to the 2010 models, Apple had not qualified any drives, other than the ones they put in the MBP's, that could work with 3Gbps drives. You may have one that doesn't.

  • Java for Mac OSX 10.4 Release7 will not work with eTrade Market Trader

    After the latest update to 10.4.11 wich was the latest version of Java the java applet will not start. Talked to eTrade tech support and found out that their site only supports up Java1.6. Now I am trying to update my Mac Pro to 10.4.10 but can not find the update anywhere that is not bundled with the latest version of Java. Called Apple support, they did not have a solution, so to all you experts how can this problem be resolved ?

    Thank you for your response. I spent 2 hours on the phone with an Apple Tech, he was really good and we went through all the possibilities (thank god for Apple Care Plan). He even got others involved but we all could not come up with anything else than to do an 'Archive-Install'. I did repair permissions several times. My Mac was running great prior to the update, I actually own 7 Mac's and I am very meticulous with maintenance and backing up everything. By the way I love these things. But when the new update came out, I told everybody to backup and then update the Mac's. Now I have 1 Mac that runs 10.4.8 and 6 that run 10.4.11. They all work great and are in great condition, but the only one that can run the online trading platform is the one running 10.4.8 and all the others have the software to access my .Mac account. Since I have these Mac's indifferent locations (so I can travel without lugging one along) I enjoy using all the .Mac features. Everything was so easy before "Java for Mac OSX 10.4 Release 7" came out. I am just really frustrated. I just wish I could go back to 10.4.10. But all the updates are bundled with the Java release 7. Is there any place where I can find 10.4.10 ?

  • MAC OSX 10.9.5: What is this strange file format in the Open Dialog box?

    Hello all.
    I'd never really noticed this, but I saw a rather unusual file format in the Open dialog box and was wondering why it appeared as it did. It appears as follows from the file/open dialog box:
    To be completely transparent, I'd originally posted this image on my twitter feed to @illustrator. Since then I have been in communication with Scott but the advice has been to reinstall Illustrator. If this had happened on one machine, I'd be inclined to agree that this may do something, but since discovering this unusual format, i've since seen it on six macs running OS 10.9.5 and illustrator version 18.1.0 OR 18.1.1
    Can anyone else confirm that they see the same thing; or if there is a difference, what this format is meant to actually be. I suspect this is a bug but need confirmation by other users.
    Colin

    The error occurs on all machines I have tested. 5 of the machines have the suitcase fusion auto-activation plug-in, but one had no plug-ins at all. All software was installed literally "out of the box" from the creative cloud.
    UPDATE - tested 3 more machines in the office all running 18.1.1 on OSX 10.9.5 and they ALL do the same thing, all installed with the suitcase fusion auto-activation plug-in, but otherwise installed "out of the box" from creative cloud.
    Colin

  • I am purchasing an Imac and used to use Windows Vista.  I have a HP Color Laserjet 2840 and need to know if it's compatible with Mac OSX?  If not, what printer is?

    I need to know what printer is compatible with Mac OS X operating system.  I have a HP Color Laserjet 2840

    Your HP Color Laserjet 2840 is compatible to Mac OS X.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=de &prodNameId=445197&prodTypeId=18972&prodSeriesId=445194&swLang=18&taskId=135&swE nvOID=4082

  • I have Mac OSX 10.5.5 what upgrade should I have/need

    I am currently using Mac 10.5.5, what upgrade should I have/need?

    Hi Wade,
    First there's a 10.5.9 update...
    Repair Permissions twice in a row afterwords, reboot.
    1058 Combo Update, 10.5.8...
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    Then to go any higher you need 10.6 DVD.
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least, more if you can afford it)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
    Other countries...
    http://support.apple.com/kb/HE57
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

  • HT1338 my mac osx is extremely slow what do I do to fix?

    system extremely slow need help ,mackeeper downloaded ,checked activity monitor, not sure how to interpret...new to mac

    Adding to what the others have posted, see:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    How to Speed up Macs, ,
    Macintosh OS X Routine Maintenance,
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X, 
    Five Mac maintenance myths and
    Myths of required versus not required maintenance for Mac OS X for information.

Maybe you are looking for

  • Calendar data in iPod Touch zapped

    I went to work and synced with Outlook calendar, all my business appointments went into my iPod Touch, then I went home to my Mac (where there was no data in Calendar) and synced, being careful to choose "the info in the computer will be overridden b

  • Purchase Order Dependent Conditions

    I would like to create a dependent condition for a purchase order. The condition being another material, for example: Full Inventory: Material A (100) Material B (100) Material .....etc Material A is used more often than Material B, however they are

  • Block level trigger vs form level trigger

    Hello. I want to know what is better - to use block or form trigger? I have many blocks in my form. I need to write custom code in (for example) key-crerec trigger. Should i put trigger into each block or should i create one at form level like: if :s

  • Gdm-20e20 monitor on sparcstation 20 and ultra2

    Hi. I'm using a Sun (sony) gdm-20e20 on a sparcstation 20 and ultra2. On both the monitor and server turns on, the orange led on the monitor flashes for a bit and then the green led turns on but nothing comes up on the screen. Does the same thing on

  • Moving oracle server to another domain

    hi all, i have no knowledge of oracle but i have to move one oracle server from one domain to another new domain as part of a company split. is this an easy thing or is it difficult? thanks andoni