Ppc glibc: problem with kernel-headers dependency
I wasn't sure where to post this... After attempting to follow the tutorial Wii Tutorial here: http://wiki.archlinux.org/index.php/Wii_Tutorial I discovered that the kernel-headers dependency of glibc is set to the wrong version. The dependency is kernel-headers version 2.6.29.4. However, in the repository, the current version is 2.6.29.1-1. I'm not sure what's going on here.
DaNiMoTh wrote:
Fixed with release of 2.6.29.4 kernel-headers package. Next time, fill the bug on our flyspray ( bugs.archlinux.org ), we'll correct much faster.
Thanks
ppc architecture is not supported by archlinux.org . the project is supported by http://archlinuxppc.org/
Last edited by wonder (2009-11-20 19:23:11)
Similar Messages
-
Hi,
When I run this
[root@localhost Server]# yum install kernel-headers
I have got
file /usr/include/linux/types.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/udf_fs_i.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/udp.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/uinput.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/uio.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/ultrasound.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/unistd.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/usbdevice_fs.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/utime.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/utsname.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/version.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/videodev.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/videodev2.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/videotext.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/virtio_blk.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/virtio_net.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/virtio_pci.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/virtio_ring.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/vt.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/wireless.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/xattr.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/linux/xfrm.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/mtd/inftl-user.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/mtd/mtd-abi.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/mtd/mtd-user.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/mtd/nftl-user.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/sound/asequencer.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/sound/asound.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/sound/asound_fm.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/sound/emu10k1.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/sound/hdsp.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/sound/hdspm.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/sound/sfnt_info.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
file /usr/include/video/sisfb.h from install of kernel-headers-2.6.18-308.1.1.0.1.el5.i386 conflicts with file from package kernel-uek-headers-2.6.32-200.13.1.el5uek.i686
Error Summary
But why do I see nothing by this?
[root@localhost Server]# rpm -qa| grep kernel-headers
[root@localhost Server]#
Here is what I get
[root@localhost ~]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.8 (Tikanga)Thanks. I ran it and I got this confirmation
=================================================================================================
Package Arch Version Repository Size
=================================================================================================
Removing:
kernel-uek-headers i686 2.6.32-200.13.1.el5uek installed 2.2 M
Removing for dependencies:
compat-glibc i386 1:2.3.4-2.26 installed 3.4 M
compat-glibc-headers i386 1:2.3.4-2.26 installed 1.9 M
gcc i386 4.1.2-52.el5 installed 9.6 M
gcc-c++ i386 4.1.2-52.el5 installed 6.5 M
gcc-gfortran i386 4.1.2-52.el5 installed 6.9 M
gcc-gnat i386 4.1.2-52.el5 installed 33 M
gcc-java i386 4.1.2-52.el5 installed 5.9 M
gcc-objc i386 4.1.2-52.el5 installed 5.5 M
gcc-objc++ i386 4.1.2-52.el5 installed 5.8 M
gcc44 i386 4.4.6-3.el5.1 installed 17 M
gcc44-c++ i386 4.4.6-3.el5.1 installed 10 M
gcc44-gfortran i386 4.4.6-3.el5.1 installed 11 M
glibc-devel i386 2.5-81.el5_8.1 installed 4.9 M
glibc-headers i386 2.5-81.el5_8.1 installed 2.0 M
systemtap i386 1.6-7.el5_8 installed 8.0 M
Transaction Summary
=================================================================================================
Remove 16 Package(s)
Reinstall 0 Package(s)
Downgrade 0 Package(s)
Is this ok [y/N]:
But the items like the below
compat-glibc i386 1:2.3.4-2.26 installed 3.4 M
compat-glibc-headers i386 1:2.3.4-2.26 installed 1.9 M
gcc i386 4.1.2-52.el5 installed 9.6 M
gcc-c++ i386 4.1.2-52.el5 installed 6.5 M
glibc-devel i386 2.5-81.el5_8.1 installed 4.9 M
glibc-headers i386 2.5-81.el5_8.1 installed 2.0 M
are really needed for my R12. What should be done next?
Edited by: HuaMin on Apr 13, 2012 5:15 PM -
HELP! Problem with KERNEL PANICS!
Hi everyone!
I have a serious problem with kernel panics - it doesn't seem to be connected with a certain type of program, but seems to be completely random. I have reinstalled my OS X and updated it, but the kernel panics just keep on coming and if possible it actually seemed to make matters worse! Now it doesn't always show the bar at the top of the screen when I turn it on, and sometimes programs like iTunes and Safari, just won't work until I restart the mac. I've also done a harware test - no faults detected. I had an idea that it might be AutoCad causing it, as it started sometime after I installed it - it was also the first program I reinstalled after OS X reinstallation - but I haven't used the AutoCad a whole lot and the panics happen way more often.
I am completely at a loss now as I'm not exactly a computer expert. If anyone can deduce something from my most recent panic log which could help me find out what's causing all this, I would greatly appreciate it!
Interval Since Last Panic Report: 95470 sec
Panics Since Last Report: 8
Anonymous UUID: 42BB5090-A5E7-0888-436E-5D5C4A60A868
Wed Oct 24 18:43:40 2012
panic(cpu 1 caller 0xffffff80192b7bd5): Kernel trap at 0xffffff8019266e6d, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff74254ab050, CR3: 0x000000000fb2f000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0xffffff74254ab040, RCX: 0xffffffffffffffff, RDX: 0xffffff007de5c000
RSP: 0xffffff8091413590, RBP: 0xffffff80914135f0, RSI: 0xffffff80253fa610, RDI: 0xffffff007de5f000
R8: 0x0000000000000000, R9: 0x0000000000003000, R10: 0x0000000000000000, R11: 0x0000000000000212
R12: 0xffffff8027014ba0, R13: 0xffffff801c599bd8, R14: 0xffffff007de5c000, R15: 0xffffff801c599bc8
RFL: 0x0000000000010293, RIP: 0xffffff8019266e6d, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff74254ab050, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff8091413230 : 0xffffff801921d626
0xffffff80914132a0 : 0xffffff80192b7bd5
0xffffff8091413470 : 0xffffff80192ce4ed
0xffffff8091413490 : 0xffffff8019266e6d
0xffffff80914135f0 : 0xffffff8019264c3f
0xffffff80914136a0 : 0xffffff8019264f60
0xffffff80914136d0 : 0xffffff8019224624
0xffffff8091413700 : 0xffffff8019622ca2
0xffffff8091413720 : 0xffffff7f9985bcd6
0xffffff8091413740 : 0xffffff7f9985e447
0xffffff8091413790 : 0xffffff7f9985c086
0xffffff80914137d0 : 0xffffff7f9985cb41
0xffffff8091413990 : 0xffffff7f998593f2
0xffffff8091413ee0 : 0xffffff801968393f
0xffffff8091413f50 : 0xffffff80195e182a
0xffffff8091413fb0 : 0xffffff80192ced33
Kernel Extensions in backtrace:
com.apple.security.sandbox(220.0)[BFFEC437-6820-3CDD-882F-346EAC151352]@0xfffff f7f99855000->0xffffff7f99865fff
dependency: com.apple.kext.AppleMatch(1.0.0d1)[327C619E-5CC2-311F-8B0C-F9D508BFD5B0]@0xffff ff7f99851000
BSD process name corresponding to current thread: awacsd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000019000000
Kernel text base: 0xffffff8019200000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 48426823677
last loaded kext at 24167594711: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f9ac61000, size 32768)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.1f2
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.AppleLPC 1.6.0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothUSBDFU 4.0.9f33
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMuxControl 3.2.11
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.GeForce 8.0.0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyEventDriver 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBOHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.kext.triggers 1.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 250,06 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52b, 0x06400000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0x06300000 / 2Hi everyone!
I have a serious problem with kernel panics - it doesn't seem to be connected with a certain type of program, but seems to be completely random. I have reinstalled my OS X and updated it, but the kernel panics just keep on coming and if possible it actually seemed to make matters worse! Now it doesn't always show the bar at the top of the screen when I turn it on, and sometimes programs like iTunes and Safari, just won't work until I restart the mac. I've also done a harware test - no faults detected. I had an idea that it might be AutoCad causing it, as it started sometime after I installed it - it was also the first program I reinstalled after OS X reinstallation - but I haven't used the AutoCad a whole lot and the panics happen way more often.
I am completely at a loss now as I'm not exactly a computer expert. If anyone can deduce something from my most recent panic log which could help me find out what's causing all this, I would greatly appreciate it!
Interval Since Last Panic Report: 95470 sec
Panics Since Last Report: 8
Anonymous UUID: 42BB5090-A5E7-0888-436E-5D5C4A60A868
Wed Oct 24 18:43:40 2012
panic(cpu 1 caller 0xffffff80192b7bd5): Kernel trap at 0xffffff8019266e6d, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff74254ab050, CR3: 0x000000000fb2f000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0xffffff74254ab040, RCX: 0xffffffffffffffff, RDX: 0xffffff007de5c000
RSP: 0xffffff8091413590, RBP: 0xffffff80914135f0, RSI: 0xffffff80253fa610, RDI: 0xffffff007de5f000
R8: 0x0000000000000000, R9: 0x0000000000003000, R10: 0x0000000000000000, R11: 0x0000000000000212
R12: 0xffffff8027014ba0, R13: 0xffffff801c599bd8, R14: 0xffffff007de5c000, R15: 0xffffff801c599bc8
RFL: 0x0000000000010293, RIP: 0xffffff8019266e6d, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff74254ab050, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff8091413230 : 0xffffff801921d626
0xffffff80914132a0 : 0xffffff80192b7bd5
0xffffff8091413470 : 0xffffff80192ce4ed
0xffffff8091413490 : 0xffffff8019266e6d
0xffffff80914135f0 : 0xffffff8019264c3f
0xffffff80914136a0 : 0xffffff8019264f60
0xffffff80914136d0 : 0xffffff8019224624
0xffffff8091413700 : 0xffffff8019622ca2
0xffffff8091413720 : 0xffffff7f9985bcd6
0xffffff8091413740 : 0xffffff7f9985e447
0xffffff8091413790 : 0xffffff7f9985c086
0xffffff80914137d0 : 0xffffff7f9985cb41
0xffffff8091413990 : 0xffffff7f998593f2
0xffffff8091413ee0 : 0xffffff801968393f
0xffffff8091413f50 : 0xffffff80195e182a
0xffffff8091413fb0 : 0xffffff80192ced33
Kernel Extensions in backtrace:
com.apple.security.sandbox(220.0)[BFFEC437-6820-3CDD-882F-346EAC151352]@0xfffff f7f99855000->0xffffff7f99865fff
dependency: com.apple.kext.AppleMatch(1.0.0d1)[327C619E-5CC2-311F-8B0C-F9D508BFD5B0]@0xffff ff7f99851000
BSD process name corresponding to current thread: awacsd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000019000000
Kernel text base: 0xffffff8019200000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 48426823677
last loaded kext at 24167594711: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f9ac61000, size 32768)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.1f2
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.AppleLPC 1.6.0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothUSBDFU 4.0.9f33
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMuxControl 3.2.11
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.GeForce 8.0.0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyEventDriver 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBOHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.kext.triggers 1.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 250,06 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52b, 0x06400000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0x06300000 / 2 -
Laptop mode tools problem with kernel 3.0
today I just updated the system and my laptop runs dramatically hotter after that. I read the archwiki, it does talk about the laptop mode tools problem with kernel 3.0 but when I opened the file /usr/sbin/laptop_mode, the lines which the wiki mentions are not there. Does anyone here have the same problem and can you offer the solution?
Here is my /usr/sbin/laptop_mode
#! /bin/sh
# Script to start or stop laptop_mode, and to control various settings of the
# kernel, hardware etc. that influence power consumption.
# This script is a part of Laptop Mode Tools. If you are running a supported
# power management daemon, this script will be automatically called on power
# state change.
# Configure laptop mode tools in /etc/laptop-mode/laptop-mode.conf, and in
# the broken-out config files in /etc/laptop-mode/conf.d.
# Please consult the manual pages laptop-mode.conf(8) and laptop_mode(8) for
# additional information.
# Maintainer: Ritesh Raj Sarraf ([email protected])
# Original Author: Bart Samwel ([email protected])
# Project home page: http://samwel.tk/laptop_mode
# Contributors to this script: Bart Samwel
# Kiko Piris
# Micha Feigin
# Andrew Morton
# Herve Eychenne
# Dax Kelson
# Jan Polacek
# ... and many others that I've stopped
# keeping track of.
# Based on a script for Linux 2.4 written by Jens Axboe.
set -a
# The laptop mode tools version number. Extracted by the installer makefile
# as well, so don't change the format!
LMTVERSION=1.59
# This script is loaded from multiple scripts to set the config defaults
# and to read the configuration on top of those. Only when the command is
# recognized does this script do anything else.
VERBOSE_OUTPUT=0
ENABLE_LAPTOP_MODE_ON_BATTERY=1
ENABLE_LAPTOP_MODE_ON_AC=0
ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED=0
PARTITIONS="auto /dev/mapper/*"
LM_BATT_MAX_LOST_WORK_SECONDS=600
LM_AC_MAX_LOST_WORK_SECONDS=360
DEF_MAX_AGE=30
LM_READAHEAD=3072
NOLM_READAHEAD=128
CONTROL_READAHEAD=1
CONTROL_NOATIME=0
USE_RELATIME=1
CONTROL_HD_IDLE_TIMEOUT=1
LM_AC_HD_IDLE_TIMEOUT=4 # 20 seconds
LM_BATT_HD_IDLE_TIMEOUT=4 # 20 seconds
NOLM_HD_IDLE_TIMEOUT=244 # 2 hours
DEF_UPDATE=5
DEF_XFS_AGE_BUFFER=15
DEF_XFS_SYNC_INTERVAL=30
DEF_XFS_BUFD_INTERVAL=1
XFS_HZ=100
CONTROL_MOUNT_OPTIONS=1
BATT_HD_POWERMGMT=1
LM_AC_HD_POWERMGMT=254
NOLM_AC_HD_POWERMGMT=254
CONTROL_HD_POWERMGMT=0
CONTROL_HD_WRITECACHE=0
NOLM_AC_HD_WRITECACHE=1
NOLM_BATT_HD_WRITECACHE=0
LM_HD_WRITECACHE=0
LM_DIRTY_RATIO=60
LM_DIRTY_BACKGROUND_RATIO=1
NOLM_DIRTY_BACKGROUND_RATIO=10
NOLM_DIRTY_RATIO=40
LM_SECONDS_BEFORE_SYNC=2
BATT_CPU_MAXFREQ=medium
BATT_CPU_MINFREQ=slowest
BATT_CPU_GOVERNOR=ondemand
BATT_CPU_IGNORE_NICE_LOAD=1
LM_AC_CPU_MAXFREQ=fastest
LM_AC_CPU_MINFREQ=slowest
LM_AC_CPU_GOVERNOR=ondemand
LM_AC_CPU_IGNORE_NICE_LOAD=1
NOLM_AC_CPU_MAXFREQ=fastest
NOLM_AC_CPU_MINFREQ=slowest
NOLM_AC_CPU_GOVERNOR=ondemand
NOLM_AC_CPU_IGNORE_NICE_LOAD=0
CONTROL_CPU_FREQUENCY=0
HD="/dev/[hs]d[abcdefgh]"
CONTROL_SYSLOG_CONF=0
LM_AC_SYSLOG_CONF=/etc/syslog-on-ac-with-lm.conf
NOLM_AC_SYSLOG_CONF=/etc/syslog-on-ac-without-lm.conf
BATT_SYSLOG_CONF=/etc/syslog-on-battery.conf
SYSLOG_CONF_SIGNAL_PROGRAM=syslogd
SYSLOG_CONF=/etc/syslog.conf
CONTROL_DPMS_STANDBY=0
BATT_DPMS_STANDBY=300
LM_AC_DPMS_STANDBY=1200
NOLM_AC_DPMS_STANDBY=1200
CONTROL_CPU_THROTTLING=0
BATT_CPU_THROTTLING=medium
LM_AC_CPU_THROTTLING=minimum
NOLM_AC_CPU_THROTTLING=minimum
CONTROL_START_STOP=1
CONTROL_TERMINAL=0
TERMINALS="/dev/vc/1 /dev/vcs1"
BATT_TERMINAL_BLANK_MINUTES=1
BATT_TERMINAL_POWERDOWN_MINUTES=2
LM_AC_TERMINAL_BLANK_MINUTES=10
LM_AC_TERMINAL_POWERDOWN_MINUTES=10
NOLM_AC_TERMINAL_BLANK_MINUTES=10
NOLM_AC_TERMINAL_POWERDOWN_MINUTES=50
ENABLE_AUTO_HIBERNATION=0
HIBERNATE_COMMAND=/usr/sbin/hibernate
AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL=1
DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL=1
AUTO_HIBERNATION_BATTERY_CHARGE_MAH=0
AUTO_HIBERNATION_BATTERY_CHARGE_MWH=0
MINIMUM_BATTERY_CHARGE_MAH=0
MINIMUM_BATTERY_CHARGE_MWH=0
ASSUME_SCSI_IS_SATA=1
CONTROL_BRIGHTNESS=0
BATT_BRIGHTNESS_COMMAND=false
LM_AC_BRIGHTNESS_COMMAND=false
NOLM_AC_BRIGHTNESS_COMMAND=false
LOG_TO_SYSLOG=1
DEBUG=0
ENABLE_LAPTOP_MODE_TOOLS=1
# Initialize the PATH Variable
export PATH="${PATH}":/bin:/sbin:/usr/bin:/usr/sbin
# This is a 2 phase locking approach. LMT_REQ_LOCK is the outer lock and LMT_INVOC_LOCK is the inner lock
# We take this approach to ensure the scenario that, "At any point when an event occurs (AC/BATT), the
# kernel can generate multiple events spanning over a couple of events. The first event is honored and
# lmt executes. If the last event triggered at the 9th second, there is a fair chance that a good amount
# of state change would have occured in the OS, to honor that state, we keep an outer lock (LMT_REQ_LOCK)
# handy, so that those changes can also be applied and not forgotten.
# Workflow:
# Event-1 is generated and lmt executes (lmt runtime could span 5-10 seconds)
# At seventh second, 4 events generate. But Event-1 is still running.
# We don't want to discard all the remaining 4 events, but at least honor 1 so that we can act to the changes
# that occured in the last 7 seconds.
# So, Event-2 acquire LMT_REQ_LOCK and waits to acquire LMT_INVOC_LOCK (which is acquire by Event-1)
LMT_REQ_LOCK="/var/lock/lmt-req.lock"
LMT_INVOC_LOCK="/var/lock/lmt-invoc.lock"
FLOCK=`which flock`
checkint ()
# $1 arg should be the string/integer
# that you want to check for as an integer.
echo $1 | grep "[^0-9]" > /dev/null 2>&1
return $?;
# Returns 1 if it is an integer
# Function to handle logging
LOGGER=`which logger`;
log ()
# $1 should be msg type
# $2 should be the real msg
if [ x$LOG_TO_SYSLOG = x1 ]; then
# NOTE: Add the check on $2 being empty, once you are confident
# that there aren't any bugs in logging. And no bugs in executing
# modules and logging
if [ -x $LOGGER -a "$1" != "STATUS" ]; then
#if [ -z $2 ]; then
# continue
#elif [ "$1" = "MSG" ]; then
if [ "$1" = "MSG" ]; then
logger -p daemon.info -t laptop-mode "$2";
elif [ "$1" = "ERR" ]; then
logger -p daemon.err -t laptop-mode "$2";
elif [ "$1" = "VERBOSE" ]; then
if [ x$VERBOSE_OUTPUT = x1 ]; then
logger -p daemon.debug -t laptop-mode "$2";
fi
else
logger -p daemon.notice -t laptop-mode "$2";
fi
fi
fi
if [ "$1" = "VERBOSE" ]; then
$LM_VERBOSE && echo "$2" >/dev/fd/2;
elif [ "$1" = "ERR" ]; then
echo "$2" >/dev/fd/2;
else
# Message of type MSG and STATUS can go to stdout.
echo "$2" >/dev/fd/1;
fi
enableDebug ()
# Check if debug is enabled
if [ x$(($(basename $1 | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG)) = x1 ]; then
set -vx
fi
disableDebug ()
# Check if debug is enabled
if [ x$(($(basename $1 | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG)) = x1 ]; then
set +vx
fi
# No default on these ones -- we need to detect if they have been set, for
# backward compatibility with MINIMUM_BATTERY_MINUTES etc.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=
MINIMUM_BATTERY_CHARGE_PERCENT=
# Backward compatibility variable that is sometimes
# set externally (Debian init system)
unset VERBOSE
lmt_load_config ()
# Source config. Some config settings have been moved from the main config file
# to modular configuration files, and to support existing laptop-mode.conf
# files from earlier versions, we source the modular configuration files FIRST.
if [ -d /etc/laptop-mode/conf.d ] ; then
for CONF in /etc/laptop-mode/conf.d/*.conf ; do
if [ -r "$CONF" ] ; then
. "$CONF"
#Handle individual module debug settings
if [ "$DEBUG" -eq 1 ]; then
export $(basename $CONF | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG=1
log "VERBOSE" "Enabling debug mode for module $CONF"
fi
DEBUG=0
else
log "MSG" "Warning: Configuration file $CONF is not readable, skipping."
fi
done
fi
if [ -r /etc/laptop-mode/laptop-mode.conf ] ; then
. /etc/laptop-mode/laptop-mode.conf
else
log "ERR" "$0: Configuration file /etc/laptop-mode/laptop-mode.conf not present or not readable."
exit 1
fi
if [ x$ENABLE_LAPTOP_MODE_TOOLS = x0 ]; then
log "MSG" "laptop-mode-tools is disabled in config file. Exiting"
exit 0;
fi
# Add a simple bash debug mode switch
if [ "$DEBUG" -eq 1 ]; then
set -vx;
fi
# Support for old config settings
if [ "$AC_HD" != "" ] ; then
AC_HD_WITHOUT_LM="$AC_HD"
AC_HD_WITH_LM="$AC_HD"
fi
if [ "$VERBOSE" != "" ] ; then
VERBOSE_OUTPUT="$VERBOSE"
fi
if [ "$CPU_MAXFREQ" != "" ] ; then
BATT_CPU_MAXFREQ="$CPU_MAXFREQ"
fi
if [ "$MAX_AGE" != "" ] ; then
LM_BATT_MAX_LOST_WORK_SECONDS="$MAX_AGE"
LM_AC_MAX_LOST_WORK_SECONDS="$MAX_AGE"
fi
if [ "$DEF_AGE" != "" ] ; then
DEF_MAX_AGE="$DEF_AGE"
fi
if [ "$LAPTOP_MODE_ALWAYS_ON" != "" ] ; then
ENABLE_LAPTOP_MODE_ALWAYS="$LAPTOP_MODE_ALWAYS_ON"
fi
if [ "$LM_WHEN_LID_CLOSED" != "" ] ; then
ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED="$LM_WHEN_LID_CLOSED"
fi
if [ "$REMOUNT_PARTITIONS" != "" ] ; then
PARTITIONS="$REMOUNT_PARTITIONS"
fi
if [ "$READAHEAD" != "" ] ; then
LM_READAHEAD="$READAHEAD"
fi
if [ "$DO_REMOUNT_NOATIME" != "" ] ; then
CONTROL_NOATIME="$DO_REMOUNT_NOATIME"
fi
if [ "$DO_HD" != "" ] ; then
CONTROL_HD_IDLE_TIMEOUT="$DO_HD"
fi
if [ "$AC_HD_WITH_LM" != "" ] ; then
LM_AC_HD_IDLE_TIMEOUT="$AC_HD_WITH_LM"
fi
if [ "$AC_HD_WITHOUT_LM" != "" ] ; then
NOLM_HD_IDLE_TIMEOUT="$AC_HD_WITHOUT_LM"
fi
if [ "$BATT_HD" != "" ] ; then
LM_BATT_HD_IDLE_TIMEOUT="$BATT_HD"
fi
if [ "$DO_REMOUNTS" != "" ] ; then
CONTROL_MOUNT_OPTIONS="$DO_REMOUNTS"
fi
if [ "$DO_HD_POWERMGMT" != "" ] ; then
CONTROL_HD_POWERMGMT="$DO_HD_POWERMGMT"
fi
if [ "$AC_HDPARM_POWERMGMT_WITH_LM" != "" ] ; then
LM_AC_HD_POWERMGMT="$AC_HDPARM_POWERMGMT_WITH_LM"
fi
if [ "$AC_HDPARM_POWERMGMT_WITHOUT_LM" != "" ] ; then
NOLM_AC_HD_POWERMGMT="$AC_HDPARM_POWERMGMT_WITHOUT_LM"
fi
if [ "$BATT_HDPARM_POWERMGMT" != "" ] ; then
BATT_HD_POWERMGMT="$BATT_HDPARM_POWERMGMT"
fi
if [ "$DO_WRITECACHE" != "" ] ; then
CONTROL_HD_WRITECACHE="$DO_WRITECACHE"
fi
if [ "$AC_WRITECACHE_WITHOUT_LM" != "" ] ; then
NOLM_AC_HD_WRITECACHE="$AC_WRITECACHE_WITHOUT_LM"
fi
if [ "$BATT_WRITECACHE" != "" ] ; then
LM_HD_WRITECACHE="$BATT_WRITECACHE"
fi
if [ "$DIRTY_RATIO" != "" ]; then
LM_DIRTY_RATIO="$DIRTY_RATIO"
fi
if [ "$DIRTY_BACKGROUND_RATIO" != "" ] ; then
LM_DIRTY_BACKGROUND_RATIO="$DIRTY_BACKGROUND_RATIO"
fi
if [ "$DEF_DIRTY_RATIO" != "" ]; then
NOLM_DIRTY_RATIO="$DEF_DIRTY_RATIO"
fi
if [ "$DEF_DIRTY_BACKGROUND_RATIO" != "" ] ; then
NOLM_DIRTY_BACKGROUND_RATIO="$DEF_DIRTY_BACKGROUND_RATIO"
fi
if [ "$DO_CPU" != "" ] ; then
CONTROL_CPU_FREQUENCY="$DO_CPU"
fi
if [ "$CONTROL_CPU_MAXFREQ" != "" ] ; then
CONTROL_CPU_FREQUENCY="$CONTROL_CPU_MAXFREQ"
fi
if [ "$AC_CPU_MAXFREQ_WITH_LM" != "" ] ; then
LM_AC_CPU_MAXFREQ="$AC_CPU_MAXFREQ_WITH_LM"
fi
if [ "$AC_CPU_MAXFREQ_WITHOUT_LM" != "" ] ; then
NOLM_AC_CPU_MAXFREQ="$AC_CPU_MAXFREQ_WITHOUT_LM"
fi
if [ "$DO_SYSLOG" != "" ] ; then
CONTROL_SYSLOG_CONF="$DO_SYSLOG"
fi
if [ "$SYSLOG_SIGNAL_PROGRAM" != "" ] ;then
SYSLOG_CONF_SIGNAL_PROGRAM="$SYSLOG_SIGNAL_PROGRAM"
fi
if [ "$AC_SYSLOG_WITH_LM" != "" ] ; then
LM_AC_SYSLOG_CONF="$AC_SYSLOG_WITH_LM"
fi
if [ "$AC_SYSLOG_WITHOUT_LM" != "" ] ; then
NOLM_AC_SYSLOG_CONF="$AC_SYSLOG_WITHOUT_LM"
fi
if [ "$BATT_SYSLOG" != "" ] ; then
BATT_SYSLOG_CONF="$BATT_SYSLOG"
fi
if [ "$ENABLE_LAPTOP_MODE_ALWAYS" != "" ] ; then
ENABLE_LAPTOP_MODE_ON_AC="$ENABLE_LAPTOP_MODE_ALWAYS"
fi
if [ "$MINIMUM_BATTERY_MINUTES" != "" -a "$MINIMUM_BATTERY_CHARGE_PERCENT" = "" ] ; then
# Use a very conservative estimate (1% = 1 battery minute, 100 minutes in a battery)
# for backward compatibility.
MINIMUM_BATTERY_CHARGE_PERCENT="$MINIMUM_BATTERY_MINUTES"
fi
if [ -z "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
# Apply the default, now that we've determined that this is the minimum.
MINIMUM_BATTERY_CHARGE_PERCENT=3
fi
if [ "$AUTO_HIBERNATION_BATTERY_MINUTES" != "" -a "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" = "" ] ; then
# Use a very conservative estimate (1% = 1 battery minute, 100 minutes in a battery)
# for backward compatibility.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT="$AUTO_HIBERNATION_BATTERY_MINUTES"
fi
if [ -z "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
# Apply the default, now that we've determined that this is the minimum.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=2
fi
# Postprocessing
if [ "$VERBOSE_OUTPUT" -ne 0 ] ; then
OUTPUT="/dev/stdout"
LM_VERBOSE="[ 1 = 1 ]"
else
OUTPUT="/dev/null"
LM_VERBOSE="[ 1 = 0 ]"
fi
if [ "$PARTITIONS" = "" ] ; then
PARTITIONS="auto /dev/mapper/*"
fi
# Expand shell wild cards immediately.
PARTITIONS=$( echo $PARTITIONS )
TERMINALS=$( echo $TERMINALS )
# Convert seconds to hdparm -S format
# Everything over 20 minutes is interpreted as 2 hours.
seconds_to_hdparm_S() {
if [ "$1" -eq 0 ] ; then
# disable.
echo 0
elif [ "$1" -gt 0 -a "$1" -lt 5 ] ; then
# 5 seconds minimum
echo 1
elif [ "$1" -le $((240*5)) ] ; then
# Values between 1 and 240 signify increments of 5 seconds
echo $(($1 / 5))
elif [ "$1" -lt $((30*60)) ] ; then
# Values between 20 and 30 minutes are rounded up to 30 minutes.
echo 241
elif [ "$1" -lt $((12*30*60)) ] ; then
# Values between 30 minutes and 6 hours (exclusive) yield values between
# 241 and 251, in 30-minute increments.
echo $(( 240 + ($1 / (30*60)) ))
else
# Larger values effectively indicate no timeout at all.
echo 0
fi
# Convert configured idle timeouts to hdparm -S format.
if [ "$LM_AC_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
LM_AC_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $LM_AC_HD_IDLE_TIMEOUT_SECONDS)
fi
if [ "$LM_BATT_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
LM_BATT_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $LM_BATT_HD_IDLE_TIMEOUT_SECONDS)
fi
if [ "$NOLM_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
NOLM_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $NOLM_HD_IDLE_TIMEOUT_SECONDS)
fi
# The main workhorse.
lmt_main_function ()
if [ "$1" = "status" ] ; then
# Display a status report.
log "STATUS" "Mounts:"
mount | sed "s/^/ /"
log "STATUS" " "
log "STATUS" "Drive power status:"
for disk in $HD; do
if [ -r $disk ]; then
hdparm -C $disk 2>/dev/null | sed "s/^/ /"
else
log "STATUS" " Cannot read $disk, permission denied - $0 needs to be run as root"
fi
done
log "STATUS" " "
log "STATUS" "(NOTE: drive settings affected by Laptop Mode cannot be retrieved.)"
log "STATUS" " "
log "STATUS" "Readahead states:"
cat /etc/mtab | while read DEV MP FST OPTS DUMP PASS ; do
# skip funny stuff
case "$FST" in
rootfs|unionfs|tmpfs|squashfs|sysfs|usbfs|proc|devpts) continue
esac
if [ -b $DEV ] ; then
if [ -r $DEV ] ; then
log "STATUS" " $DEV: $((`blockdev --getra $DEV` / 2)) kB"
else
log "STATUS" " Cannot read $DEV, permission denied - $0 needs to be run as root"
fi
fi
done
log "STATUS" " "
if [ -e /var/run/laptop-mode-tools/enabled ] ; then
log "STATUS" "Laptop Mode Tools is allowed to run: /var/run/laptop-mode-tools/enabled exists."
else
log "STATUS" "Laptop Mode Tools is NOT allowed to run: /var/run/laptop-mode-tools/enabled does not exist."
fi
log "STATUS" " "
STATFILES="/proc/sys/vm/laptop_mode /proc/apm /proc/pmu/info /proc/sys/vm/bdflush /proc/sys/vm/dirty_ratio /proc/sys/fs/xfs/age_buffer /proc/sys/fs/xfs/sync_interval /proc/sys/fs/xfs/lm_age_buffer /proc/sys/fs/xfs/lm_sync_interval /proc/sys/vm/pagebuf/lm_flush_age /proc/sys/fs/xfs/xfsbufd_centisecs /proc/sys/fs/xfs/xfssyncd_centisecs /proc/sys/vm/dirty_background_ratio /proc/sys/vm/dirty_expire_centisecs /proc/sys/fs/xfs/age_buffer/centisecs /proc/sys/vm/dirty_writeback_centisecs /sys/devices/system/cpu/*/cpufreq/cpuinfo_*_freq /sys/devices/system/cpu/*/cpufreq/scaling_governor /proc/acpi/button/lid/*/state /proc/acpi/ac_adapter/*/state /proc/acpi/battery/*/state /sys/class/power_supply/*/online /sys/class/power_supply/*/state"
for THISFILE in $STATFILES ; do
if [ -e "$THISFILE" ] ; then
log "STATUS" "$THISFILE:"
if [ -r "$THISFILE" ] ; then
cat "$THISFILE" | sed "s/^/ /"
else
log "STATUS" " Not accessible, permission denied - $0 needs to be run as root."
fi
log "STATUS" " "
fi
done
elif [ "$1" != "readconfig" -a "$1" != "defaults" ] ; then
KLEVEL="$(uname -r |
IFS='.-' read a b c
echo $a.$b
KMINOR="$(uname -r |
IFS='.-' read a b c d
# Strip any stuff from the end -- only the initial digits are part of the KMINOR.
echo $c | sed -e 's/\([[:digit:]]*\).*/\1/'
# Stop exporting everything -- what we do from here is private.
set +a
if [ "$1" = "--version" ] ; then
log "MSG" "Laptop Mode Tools $LMTVERSION"
exit 0
fi
if [ ! -e /proc/sys/vm/laptop_mode ] ; then
log "ERR" "Kernel does not have support for laptop mode. Please apply the laptop mode"
log "ERR" "patch or install a newer kernel."
exit 1
fi
if [ ! -w /proc/sys/vm/laptop_mode ] ; then
log "ERR" "You do not have enough privileges to enable laptop_mode."
exit 1
fi
INIT=0 # Display info in init script format?
FORCE=0 # Force reapplying the current state?
while [ "$1" != "" ] ; do
case "$1" in
init) INIT=1 ;;
force) FORCE=1 ;;
# Old options. We always do "auto" for any option now, but
# we still have to accept the options.
start) ;;
stop) ;;
auto) ;;
modules=*)
MODULES=$1
MODULES=${MODULES#"modules="}
devices=*)
DEVICES=$1
DEVICES=${DEVICES#"devices="}
*) log "ERR" "Unrecognized option $1."
exit 1 ;;
esac
shift
done
mkdir -p /var/run/laptop-mode-tools
# Used to display laptop mode state later on. This is the enabled/disabled
# state for laptop mode processing, it tells us nothing about whether laptop
# mode is actually _active_.
STATE=enabled
if [ "$ENABLE_LAPTOP_MODE_ON_BATTERY" -eq 0 -a "$ENABLE_LAPTOP_MODE_ON_AC" -eq 0 -a "$ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED" -eq 0 ] ; then
STATE=disabled
fi
# Determine the power state.
# First try /sys/class/power_supply/*
FOUND_SYS_CLASS_POWER_SUPPLY_AC=0
ON_AC=0
for POWER_SUPPLY in /sys/class/power_supply/* ; do
if [ -f $POWER_SUPPLY/type ] ; then
if [ "$(cat $POWER_SUPPLY/type)" = "Mains" ] ;then
log "VERBOSE" "Determining power state from $POWER_SUPPLY/online."
FOUND_SYS_CLASS_POWER_SUPPLY_AC=1
if [ "$(cat $POWER_SUPPLY/online)" = 1 ] ; then
ON_AC=1
fi
fi
fi
done
if [ $FOUND_SYS_CLASS_POWER_SUPPLY_AC = 1 ] ; then
# Already found it!
log "VERBOSE" "Not trying other options, already found a power supply."
elif [ -d /proc/acpi/ac_adapter ] ; then
log "VERBOSE" "Determining power state from /proc/acpi/ac_adapter."
ADAPTERS_FOUND=0
ON_AC=0
for ADAPTER in /proc/acpi/ac_adapter/* ; do
if [ -f $ADAPTER/state ] ; then
ADAPTERS_FOUND=1
STATUS=`awk '/^state: / { print $2 }' $ADAPTER/state`
if [ "$STATUS" = "on-line" ] ; then
ON_AC=1
fi
fi
done
if [ "$ADAPTERS_FOUND" -eq 0 ] ; then
ON_AC=1
fi
elif [ -f /proc/pmu/info ] ; then
log "VERBOSE" "Determining power state from /proc/pmu/info."
if ( grep -q "^AC Power.*0$" /proc/pmu/info ) ; then
log "VERBOSE" "/proc/pmu/info indicates absence of AC power."
ON_AC=0
else
# It is possible that there is no AC Power = 1 in the file,
# but we always assume AC power when we're not sure.
ON_AC=1
log "VERBOSE" "/proc/pmu/info indicates presence of AC power."
fi
elif [ -f /proc/apm ] ; then
log "VERBOSE" "Determining power state from /proc/apm."
read D1 D2 D3 APM_AC_STATE D0 </proc/apm
if [ "$APM_AC_STATE" = "0x00" ] ; then
ON_AC=0
else
ON_AC=1
fi
else
log "VERBOSE" "No /sys/class/power_supply, ACPI, APM or PMU power management information found -- assuming AC power is present."
ON_AC=1
fi
# Determine whether to activate or deactivate laptop mode.
ACTIVATE=0
if [ "$ON_AC" -eq 1 ] ; then
if [ "$ENABLE_LAPTOP_MODE_ON_AC" -ne 0 ] ; then
log "VERBOSE" "On AC power: Activating, because ENABLE_LAPTOP_MODE_ON_AC is set."
ACTIVATE=1
else
log "VERBOSE" "On AC power: Deactivating, because ENABLE_LAPTOP_MODE_ON_AC is not set."
ACTIVATE=0
fi
else
if [ "$ENABLE_LAPTOP_MODE_ON_BATTERY" -ne 0 ] ; then
log "VERBOSE" "On battery power: Activating, because ENABLE_LAPTOP_MODE_ON_BATTERY is set."
ACTIVATE=1
else
log "VERBOSE" "On battery power: Deactivating, because ENABLE_LAPTOP_MODE_ON_BATTERY is not set."
ACTIVATE=0
fi
fi
if [ "$ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED" -ne 0 -a "$ACTIVATE" -eq 0 ] ; then
if [ -x "`which hal-find-by-property`" ] ; then
HAL_LID_BUTTON=$(hal-find-by-property --key "button.type" --string "lid")
fi
if [ "$HAL_LID_BUTTON" != "" ] ; then
HAL_LID_BUTTON_STATE=$(hal-get-property --udi $(hal-find-by-property --key "button.type" --string "lid") --key "button.state.value")
if [ "$HAL_LID_BUTTON_STATE" = "true" ] ; then
log "VERBOSE" "Setting action to \"start\" because the lid is closed (says HAL)."
ACTIVATE=1
fi
elif [ -f /proc/acpi/button/lid/*/state ] ; then
if ( grep -q "closed" /proc/acpi/button/lid/*/state ) ; then
log "VERBOSE" 'Setting action to "start" because the lid is closed (says /proc/acpi/button/lid/*/state).'
ACTIVATE=1
fi
else
log "MSG" "Warning: ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED is set, but there is no file"
log "MSG" "/proc/acpi/button/lid/.../state, and hal information is not available either!"
fi
fi
# If the init script has not been run or has been run with the "stop"
# argument, then we should never start laptop mode.
if [ ! -f /var/run/laptop-mode-tools/enabled ] ; then
log "VERBOSE" "Laptop mode disabled because /var/run/laptop-mode-tools/enabled is missing."
STATE=disabled
fi
if [ "$ACTIVATE" -eq 1 -a -f /etc/default/laptop-mode ] ; then
. /etc/default/laptop-mode
if ! ( echo "$ENABLE_LAPTOP_MODE" |grep y ) ; then
log "VERBOSE" "Not starting laptop mode because it is disabled in /etc/default/laptop-mode."
STATE=disabled
fi
fi
if [ "$STATE" = "disabled" ] ; then
ACTIVATE=0
fi
# Check whether we are allowed to activate the data-loss-sensitive stuff.
# If the battery charge is too low, we want to disable this, but not the
# other power-saving stuff.
if [ "$ACTIVATE" -eq 0 ] ; then
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=0
elif [ "$ON_AC" = 1 ] ; then
log "VERBOSE" "On AC, not checking minimum battery charge."
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=1
else
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=1
ENOUGH_CHARGE=0
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=0
# Weird way of checking that /sys/class/power_supply is not empty -- but it works.
if [ "$(echo /sys/class/power_supply/*)" != '/sys/class/power_supply/*' ] ; then
log "VERBOSE" "Not on AC and we have battery information in /sys/class/power_supply/BAT* -- checking minimum battery charge."
for BATT in /sys/class/power_supply/* ; do
BATT_TYPE=$(cat $BATT/type)
log "VERBOSE" "$BATT is of type $BATT_TYPE."
if [ "$BATT_TYPE" != "Battery" ] ; then
log "VERBOSE" "Not of type \"Battery\", skipping."
else
PREV_ENOUGH_CHARGE=$ENOUGH_CHARGE
PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
log "VERBOSE" "Checking levels for $BATT."
PRESENT=$(cat $BATT/present)
log "VERBOSE" "Present: $PRESENT."
# Only do if the battery is present
if [ "$PRESENT" -eq 1 ] ; then
FOUND_AN_ENABLED_CHECK=0
FOUND_AN_ENABLED_HIBERNATION_CHECK=0
# Get the remaining capacity.
IN_UAH=0
IN_UWH=0
if [ -f $BATT/charge_now ] ; then
REMAINING=$(cat $BATT/charge_now)
IN_UAH=1 # charge_* is in microAmpere-hours
elif [ -f $BATT/energy_now ] ; then
REMAINING=$(cat $BATT/energy_now)
IN_UWH=1 # energy_* is in microWatt-hours
else
REMAINING=0
fi
if [ -z "$REMAINING" -o "$REMAINING" -eq 0 ] ; then
log "VERBOSE" "Battery does not report remaining charge. Perhaps it is not present?"
REMAINING=0
fi
log "VERBOSE" "Remaining charge: $REMAINING"
if [ -f $BATT/charge_full_design ] ; then
CAPACITY=$(cat $BATT/charge_full_design)
elif [ -f $BATT/energy_full_design ] ; then
CAPACITY=$(cat $BATT/energy_full_design)
else
CAPACITY=0
fi
if [ -z "$CAPACITY" -o "$CAPACITY" -eq 0 ] ; then
log "VERBOSE" "Battery does not report design full charge, using non-design full charge."
if [ -f $BATT/charge_full ] ; then
CAPACITY=$(cat $BATT/charge_full)
elif [ -f $BATT/energy_full_design ] ; then
CAPACITY=$(cat $BATT/energy_full)
else
CAPACITY=0
fi
if [ -z "$CAPACITY" -o "$CAPACITY" -eq 0 ] ; then
log "VERBOSE" "Battery does not report non-design full charge."
CAPACITY=0
fi
fi
log "VERBOSE" "Full capacity: $CAPACITY"
# Check the charge percentage
if [ "$MINIMUM_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a capacity. Minimum battery"
log "MSG" "charge checking does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Auto hibernation"
log "MSG" "does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# $BATT/alarm is the design_capacity_warning of a battery.
ALARM_LEVEL=$(cat $BATT/alarm)
if [ "$ALARM_LEVEL" -ne 0 ] ; then
if [ "$REMAINING" -le "$ALARM_LEVEL" ] ; then
# Restore the state we had before checking this battery, so that
# this battery does not count as having enough charge.
ENOUGH_CHARGE=$PREV_ENOUGH_CHARGE
elif [ "$FOUND_AN_ENABLED_CHECK" -eq 0 ] ; then
# This is the only check that is enabled. In that case a non-critical
# battery level counts as "enough". (If we would count non-critical
# battery levels as enough *always*, then the other settings would
# have no effect; this is only a final fallback.)
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$REMAINING" -le "$ALARM_LEVEL" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
elif [ "$FOUND_AN_ENABLED_HIBERNATION_CHECK" -eq 0 ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# Fallback: hard values
if [ "$IN_UAH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge $((1000*"$MINIMUM_BATTERY_CHARGE_MAH")) ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge $((1000*"$AUTO_HIBERNATION_BATTERY_CHARGE_MAH")) ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
elif [ "$IN_UWH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge $((1000*"$MINIMUM_BATTERY_CHARGE_MWH")) ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge $((1000*"$AUTO_HIBERNATION_BATTERY_CHARGE_MWH")) ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "ERR" "Failed to determine battery charge. Battery charge units are not in"
log "ERR" "mWh, uWh, mAh or uAh."
fi
else
log "VERBOSE" "Battery is not present."
fi
fi
done
elif [ "$(echo /proc/acpi/battery/*)" != '/proc/acpi/battery/*' ] ; then
log "VERBOSE" "Not on AC and we have batteries in /proc/acpi/battery -- checking minimum battery charge."
for BATT in /proc/acpi/battery/* ; do
PREV_ENOUGH_CHARGE=$ENOUGH_CHARGE
PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
BATT_STATE=$BATT/state
BATT_INFO=$BATT/info
log "VERBOSE" "Checking info and state for $BATT."
# Only do if the battery is present
if ( grep -q 'present:.*yes' $BATT_INFO ) ; then
FOUND_AN_ENABLED_CHECK=0
FOUND_AN_ENABLED_HIBERNATION_CHECK=0
# Get the remaining capacity.
REMAINING=`grep "remaining capacity:" $BATT_STATE | sed "s/.* \([0-9][0-9]* \).*/\1/" `
if [ -z "$REMAINING" ] ; then
log "VERBOSE" "Battery does not report remaining charte. Perhaps it is not present?"
REMAINING=0
fi
log "VERBOSE" "Remaining charge: $REMAINING"
CAPACITY=`grep "design capacity:" $BATT_INFO | sed "s/.* \([0-9][0-9]* \).*/\1/" `
if [ -z "$CAPACITY" ] ; then
log "VERBOSE" "Battery does not report capacity. Perhaps it is not present?"
CAPACITY=0
fi
log "VERBOSE" "Design capacity: $CAPACITY"
# Check the charge percentage
if [ "$MINIMUM_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Minimum battery"
log "MSG" "charge checking does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Auto hibernation"
log "MSG" "does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# Fallback: hard values.
# Determine the reporting unit.
IN_MAH=0
IN_MWH=0
if ( grep -q mWh $BATT_INFO ) ; then
IN_MWH=1
elif ( grep -q mAh $BATT_INFO ) ; then
IN_MAH=1
fi
if [ "$IN_MAH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge "$MINIMUM_BATTERY_CHARGE_MAH" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
elif [ "$IN_MWH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge "$MINIMUM_BATTERY_CHARGE_MWH" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "ERR" "Failed to determine battery charge. Battery charge units are not in"
log "ERR" "mWh or mAh."
fi
CAP_STATE=`sed -r 's/^capacity state:\s*(.*)\s*$/\1/;t;d' "$BATT_STATE"`
if [ "$DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$CAP_STATE" = "critical" ] ; then
# Restore the state we had before checking this battery, so that
# this battery does not count as having enough charge.
ENOUGH_CHARGE=$PREV_ENOUGH_CHARGE
elif [ "$FOUND_AN_ENABLED_CHECK" -eq 0 ] ; then
# This is the only check that is enabled. In that case a non-critical
# battery level counts as "enough". (If we would count non-critical
# battery levels as enough *always*, then the other settings would
# have no effect; this is only a final fallback.)
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$CAP_STATE" = "critical" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
elif [ "$FOUND_AN_ENABLED_HIBERNATION_CHECK" -eq 0 ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "VERBOSE" "Battery is not present."
fi
done
else
ENOUGH_CHARGE=1
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
log "VERBOSE" "Not on AC and could not check battery state -- data loss sensitive features stay enabled and auto-hibernation will not work."
fi
if [ "$ENABLE_AUTO_HIBERNATION" -ne 0 -a "$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION" -eq 0 ] ; then
log "VERBOSE" "None of the batteries have a charge above the auto-hibernation level."
log "VERBOSE" "Starting hibernation."
if [ -x $HIBERNATE_COMMAND ]; then
$HIBERNATE_COMMAND
elif [ -f /sys/power/state ]; then
grep -q disk /sys/power/state && echo disk > /sys/power/state
fi
# Don't continue -- if things are configured correctly, then we
# will be called on resume.
exit 0
fi
if [ "$ENOUGH_CHARGE" -eq 0 ] ; then
log "VERBOSE" "None of the batteries have a charge above the minimum level."
log "VERBOSE" "Deactivating data loss sensitive features."
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=0
fi
fi
if [ "$INIT" -eq 0 ] ; then
log "MSG" "Laptop mode "
fi
# WAS_ACTIVE is used later on. If there is no /var/run/laptop-mode-tools/state, then
# we know that laptop mode wasn't active before.
WAS_ACTIVE=0
log "VERBOSE" "Checking if desired state is different from current state."
if [ -f /var/run/laptop-mode-tools/state ] ; then
read WAS_ACTIVE WAS_ON_AC WAS_ACTIVATE_WITH_POSSIBLE_DATA_LOSS WAS_STATE < /var/run/laptop-mode-tools/state
if [ "$WAS_STATE" != "" ] ; then
if [ "$WAS_ACTIVE" -eq "$ACTIVATE" -a "$WAS_ON_AC" -eq "$ON_AC" -a "$WAS_ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -a "$WAS_STATE" = "$STATE" -a "$FORCE" -eq 0 ] ; then
log "MSG" "$STATE, "
if [ "$WAS_ACTIVE" -eq 1 ] ; then
log "MSG" "active [unchanged]"
if [ "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq 0 ] ; then
log "MSG" " (Data-loss sensitive features disabled.)"
fi
else
log "MSG" "not active [unchanged]"
fi
exit 0
fi
fi
else
log "VERBOSE" "/var/run/laptop-mode-tools/state does not exist, no previous state."
fi
echo "$ACTIVATE $ON_AC $ACTIVATE_WITH_POSSIBLE_DATA_LOSS $STATE" > /var/run/laptop-mode-tools/state
if [ "$ACTIVATE" -eq 1 ] ; then
log "MSG" "$STATE, active"
if [ "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq 0 ] ; then
log "MSG" " (Data-loss sensitive features disabled.)"
fi
else
log "MSG" "$STATE, not active"
fi
# Finally, call laptop-mode-tools modules. The modules can use the settings
# from the config files, but they may NOT assume the settings actually exist,
# as no defaults have been given for them.
# Note that the /usr/local/lib path is deprecated.
export FORCE STATE ON_AC ACTIVATE ACTIVATE_WITH_POSSIBLE_DATA_LOSS KLEVEL KMINOR WAS_ACTIVE LM_VERBOSE DEVICES
for SCRIPT in /usr/share/laptop-mode-tools/modules/* /usr/local/lib/laptop-mode-tools/modules/* /usr/local/share/laptop-mode-tools/modules/* /etc/laptop-mode/modules/* ; do
if [ -z "$MODULES" ] ; then
# If a module list has not been provided, execute all modules
EXECUTE_SCRIPT=1
else
# If a module list has been provided, execute only the listed
# modules.
EXECUTE_SCRIPT=0
for MODULE in $MODULES; do
# Attempt to remove the module name from the end of the
# full script path. If the module name matches the
# script, the name will be removed from the end of the
# full file path, leaving the path to the script. If
# there was not a match made, the module name would not
# be removed from the path, and $PATH_TO_SCRIPT would
# be the same as $SCRIPT.
PATH_TO_SCRIPT=${SCRIPT%%$MODULE}
# Execute the script if a match was found (module name
# was removed from the script path, making it shorter.
if [ $PATH_TO_SCRIPT != $SCRIPT ] ; then
EXECUTE_SCRIPT=1
fi
done
fi
if [ -x "$SCRIPT" -a $EXECUTE_SCRIPT -eq 1 ] ; then
log "VERBOSE" "Invoking module $SCRIPT."
SCRIPT_DEBUG=$SCRIPT; # We do this because in start-stop-programs module a $SCRIPT variable is used. That
# changes the whole meaning when passed to disableDebug ()
enableDebug $SCRIPT_DEBUG;
. $SCRIPT
disableDebug $SCRIPT_DEBUG;
else
log "VERBOSE" "Module $SCRIPT is not executable or is to be skipped."
fi
done
exit 0
# This fi closes the if for "readconfig". If I would have indented this one
# I would have indented the whole file. :)
fi
lmt_load_config
lock_retry ()
( $FLOCK -n -x -w 1 8 || exit 0;
i=10;
while [ $i -ge 1 ]
do
log "ERR" "Couldn't acquire lock. Retrying.... PID is $$\n"
$FLOCK -x -w 1 9 && lmt_main_function "$@" && break;
i=$(( $i - 1 ))
done
) 8>$LMT_REQ_LOCK
# Check and acquire locks and then exec.
( $FLOCK -n -x -w 1 8; ) 8>$LMT_REQ_LOCK
($FLOCK -n -x -w 1 9 && lmt_main_function "$@";) || lock_retry "$@"
) 9<>$LMT_INVOC_LOCK
# We do a special run of battery polling daemon here so that it does not get
# plagued by the lock. We need the polling daemon to be independent of any locks
if [ x$ENABLE_BATTERY_LEVEL_POLLING = x1 ] && [ x$BLACKLIST_IN_FLOCK = x1 ]; then
log "VERBOSE" "Battery level polling is enabled."
if [ x$ON_AC = x1 ] ; then
log "VERBOSE" "On AC, stopping the polling daemon."
# In AC mode we disable the polling daemon.
killall -q lm-polling-daemon
else
if ! pidof -x lm-polling-daemon ; then
log "VERBOSE" "On battery and there was no polling daemon yet, starting the polling daemon."
# If there is no polling daemon, we start one.
/usr/share/laptop-mode-tools/module-helpers/lm-polling-daemon < /dev/null > /dev/null 2> /dev/null &
fi
fi
else
log "VERBOSE" "Battery level polling is disabled."
fi
exit 0;
and here is the lines which archwiki mentions
case "$KLEVEL" in
"2.4" ) ;;
"2.6" ) ;;
log "ERR" "Unhandled kernel version: $KLEVEL ('uname -r' = '$(uname -r)')" >&2
exit 1
esacI had the problem but edited the line in /usr/sbin/laptop_mode and it worked. But thoes lines are not there anymore. I guess they changed it at the recent update of laptop-mode-tools.
Regarding your heat problem; is there any other thing you use to cut down power usage (from AUR maybe)? I use acpi_call from AUR had to edit lines there aswell, but it should be updated by now. -
Problems with kernel panics when sleeping since 10.6.8
Hi folks,
I installed 10.6.8 the day it was issued, and since then have had some very odd problems with sleeping my Mac Pro. Intermittently, it goes into a half-sleep state when I request sleep mode; the fans still spin, but the sleep light pulses. It refuses to wake up, requiring a hard reset. The console logs show:
Sleep: Drivers Failure Panic
The specific panic is:
panic(cpu X caller 0xffffff80002251fb): "TLB invalidation IPI timeout: " "CPU(s) failed to respond to interrupts, unresponsive CPU bitmap: 0x101, NMIPI acks: orig: 0x0, now: 0x0"@/SourceCache/xnu/xnu-1504.15.3/osfmk/x86_64/pmap.c:2741
where cpu X varies between any one of the 6 cores.
So far, I've tried
Resetting the PRAM and SMC
Disabling a raft of sleep related options (Wake on Bluetooth, etc)
Reinstalling the 10.6.8 update via the Combo updater
Repairing disk permissions
Reinstalling from the factory DVD and re-running the combo updater
And no doubt other things I've forgotten. The only thing that seems to fix it is to not install 10.6.8; when I reinstalled 10.6.4 (the factory OS), it slept and woke fine 10 times. As soon as the combo update was installed, it started sleep crashing again after 4-5 attempts.
I'm assuming this is some rogue driver bug introduced in the .8 release, but I've not seen anyone else suffering the problem. I would roll back onto .7, but will obviously need .8 to install Lion when it arrives.
Does anyone have any suggestions that I've missed, or has anyone else seen this problem?
Thanks,
adamwWoops, sorry - typo. I meant 5870 (Apple provided). As far as I know, I'm not running any 3rd party drivers. The only non-Apple kernel extensions loaded are Parallels, which I've unloaded (and the problem persisted).
I should also mention, the Apple Hardware Test passes the machine.
I'll check out those two forums and see if I can find anything. Thanks for the advice!
Edit: The whole panic log is...
Sat Jun 25 22:30:09 2011
panic(cpu 2 caller 0xffffff80002251fb): "TLB invalidation IPI timeout: " "CPU(s) failed to respond to interrupts, unresponsive CPU bitmap: 0x101, NMIPI acks: orig: 0x0, now: 0x0"@/SourceCache/xnu/xnu-1504.15.3/osfmk/x86_64/pmap.c:2741
Backtrace (CPU 2), Frame : Return Address
0xffffff80db0db8a0 : 0xffffff8000204d15
0xffffff80db0db9a0 : 0xffffff80002251fb
0xffffff80db0dba10 : 0xffffff800022691f
0xffffff80db0dba90 : 0xffffff800021b545
0xffffff80db0dbb00 : 0xffffff80002184b1
0xffffff80db0dbc00 : 0xffffff80002188b3
0xffffff80db0dbc30 : 0xffffff80002a6813
0xffffff80db0dbd40 : 0xffffff800027522f
0xffffff80db0dbe10 : 0xffffff8000292b1b
0xffffff80db0dbe50 : 0xffffff8000205536
0xffffff80db0dbe80 : 0xffffff80002029eb
0xffffff80db0dbef0 : 0xffffff8000274176
0xffffff80db0dbf60 : 0xffffff80002c3095
0xffffff80db0dbfa0 : 0xffffff80002e4894
BSD process name corresponding to current thread: SystemUIServer
Mac OS version:
10K540
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 67602566330
unloaded kexts:
(none)
loaded kexts:
com.parallels.kext.prl_vnic 6.0 12090.660720 - last loaded 6124490875
com.parallels.kext.prl_netbridge 6.0 12090.660720
com.parallels.kext.prl_usb_connect 6.0 12090.660720
com.parallels.kext.prl_hid_hook 6.0 12090.660720
com.parallels.kext.prl_hypervisor 6.0 12090.660720
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleBluetoothMultitouch 54.3
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleHDA 2.0.5f13
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyDriver 2.0.5f13
com.apple.driver.AGPM 100.12.31
com.apple.driver.AudioAUUC 1.57
com.apple.kext.ATIFramebuffer 6.3.6
com.apple.driver.AppleUSBDisplays 289
com.apple.filesystems.msdosfs 1.6.3
com.apple.filesystems.ntfs 3.4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleIntelPenrynProfile 9999
com.apple.driver.AppleIntelNehalemProfile 76
com.apple.driver.AppleIntelMeromProfile 76
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.ATIRadeonX3000 6.3.6
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AirPortBrcm43xx 423.91.27
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.Intel82574L 2.1.8b1
com.apple.driver.AppleIntel8254XEthernet 2.1.3b1
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.iokit.CHUDUtils 364
com.apple.iokit.CHUDProf 366
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.IOBluetoothHIDDriver 2.4.5f3
com.apple.driver.AppleMultitouchDriver 207.11
com.apple.driver.AppleHDAHardwareConfigDriver 2.0.5f13
com.apple.driver.DspFuncLib 2.0.5f13
com.apple.driver.AppleProfileReadCounterAction 76
com.apple.driver.AppleProfileTimestampAction 76
com.apple.driver.AppleProfileThreadInfoAction 76
com.apple.driver.AppleUSBHIDKeyboard 141.5
com.apple.driver.AppleHIDKeyboard 141.5
com.apple.driver.AppleProfileRegisterStateAction 76
com.apple.driver.AppleProfileKEventAction 76
com.apple.driver.AppleProfileCallstackAction 76
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleUSBAudio 2.7.6f6
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f13
com.apple.iokit.IOHDAFamily 2.0.5f13
com.apple.iokit.AppleProfileFamily 76
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IONDRVSupport 2.2
com.apple.kext.ATI5000Controller 6.3.6
com.apple.kext.ATISupport 6.3.6
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.XsanFilter 402.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.iokit.CHUDKernLib 365
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
It varies slightly (sometimes some extensions are unloaded, sometimes not). The BSD process name changes almost every time; anything from Window Server to Mail. -
PPC program problem with MacPro
Hello all.
Suddenly all my PPC programs stopped working on the MacPro.
I have tried standard diskcheck and repair permissions on my boot harddrive.
I have 4 different PPC program: Windows Media Player, Photoshop, MS Office and cannon scangear. All stopped working.
It seems to be a problem with the PPC emulation.
Any idea what I should do? Do I really need to reinstall my mac? It feels like Windows all over...
Kind regards Mau
MacPro 3ghz Mac OS X (10.4.8)I did download the full 10.48 update an installed. It still does not work.
I am not shure what cused the problem. Had issus with that my root filesystem was full. It was /var/spool/qmaster that was filled with junk data.
I could not delete the useless data in that directory. it took 50% of my harddriva space.
I logged in as root and pwd to /var/spool/qmaster and the directory name of my qmaster que. Lets call it buhu.
cd /var/spool/qmaster/buhu.
To delete the data. The wonderful command:
rm -rf *
My computer works great, but no rosetta programs anymore. It worked since I got my Macpro in Aug.
Thanks all for the help, and sorry for my shaky enlish.
The 1049 update should have som rosetta updates. My problems could be solved with it?
I am desperate and thinking about installing a beta build of 10.49. -
Problem with kernel 2.6.19 and ipw3945 from testing
After kernel and ipw3945 packages update from testing my wireless network profile isn't working any more so there's something wrong with one of those. Ipw3945 module is loaded but network profile simply fails to start (maybe problems with dhcp?). With kernel and ipw3945 from current everything works fine.
Anyone has similar problem?congyiwu wrote:
The extra repository seems to already have 1.1.2... I was having the same problem so I ran "pacman -S extra/ipw3945"
Does anyone know why pacman -Syu doesn't automatically figure out that the version in extra is newer than the version in testing?
The extra version (i.e. the one that's been upgraded to 1.1.2) was compiled for the kernel26 package in extra (2.6.18), wheras the version in testing was compiled for the kernel26 in testing (2.6.19). Thus the module in extra won't work if you're using the newer kernel.
I hope the testing package gets upgraded soon, since it sucks not being able to use wireless! I tried to update the PKGBUILD myself, but couldn't get a working module... -
VMWare problems with Kernel 2.6.30
I'd appreciate it if someone could help me with this issue:
I recently installed the latest Kernel of arch 2.6.30, and have tried installing VMware and constantly run into a problem with the vmmon and not being support for the kernel.
I have tried installing VMware Workstation 6.5.2 and VMware Workstation 6.5.3
I am sure I could use any other open source products but I have been using VMware in windows so would like to be able to keep those VMsAccording to the "Installing VMWare" page on the Wiki (http://wiki.archlinux.org/index.php/Installing_VMware) you have to do this:
sudo mv /usr/lib/vmware/modules/binary /usr/lib/vmware/modules/binary.old
sudo vmware-modconfig --console --install-all -
SAP Solution Manager SR1 with MSSQL on W2K3 IA32 - Problem with Kernel
Hello,
we are implementing a sandbox in order to test the SAP Solution Manager 4.0 SR1 with MSSQL on W2K3 IA32. Therefore we ordered the installation CD for the above mentioned configuration. Instead of getting the SAP NETWEAVER Kernel SR1 we got SR2. Now we have the problem, that the installation program SAPINST is requesting the SR1- Kernel.
Unforunately the SR1-Kernel seems no longer available in the download section.
It would be fine to get a suggestion how to solve the problem.
Thanks
Best regards
Ralf Richter ([email protected])Hi Andreas,
thanks for the hint, I have already checked the LABEL.ASC. I have no LABEL.ASC-Key for the SAP Netweaver 2004s SR1, so it would be a possibilty to substitue this key. But neverhteless, I think, there should be another official procedure in order to use the SR2 instead of the old SR1. I have contacted Klaus Billing at SAP as recommended in the OSS Note 918078. Best regards. Ralf R. -
[SOLVED] Touchpad problems with Kernel-2.6.28
I just updated my kernel to 2.6.28. Everythink is working fine (including my Atheros AGN wireless ). The only problem I have now is the Touchpad. After update the double click on the touchpad and the scroll function is not working any more.
Anyone knows why or is having the same problem?
Last edited by falke (2009-01-26 16:32:31)Thanks a lot!!! It works! I cant live without touchpad scrolling.
I also needed to create /etc/hal/fdi/policy/shmconfig.fdi with this content:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="input.x11_driver" string="synaptics">
<merge key="input.x11_options.SHMConfig" type="string">True</merge>
</match>
</device>
</deviceinfo> -
Problem with kernel after yaboot on PowerBook G4
Hi all,
i've installed correctly archlinux on my ppc G4, following the wiki and by logic. The command yabootconfig doesn't exist, and i used a manual configuration. When i reboot my machine, i have the following at the boot:
//pci@f4000000/ata-6@d/disk@0:3, /boot/vmlinux26" Unknown or corrupt filesystem
I have installed the kernel26, in terminal pacman -Syu, then pacman -S kernel26.
How can i fix?Probably just a typo, but shouldn't it be kernel26-pmac?
I was able to install Arch on a Powerbook G4, but i also had to install the kernel manually by chrooting
into the filesystem and do a pacman -S kernel26-pmac.
You could try to boot the Install Cd and mount your 'boot' partition from there.
Check the yaboot.conf: does the line 'boot=...' point to the correct partition?
Other ideas... mount your 'root' partition and check if there actually is a vmlinux26 file in the /boot directory and if it has a
reasonable size (i once had the problem that my vmlinux26 was 0 bytes). -
CFHTTP problem with Host Headers
I am trying to post a form on a windows server using cfhttp.
The website relies on host headers to work properly (there are many sites on the server), but cfhttp posts appear not to send the required header information, returning a "No websites are configured" error message.
I've tried sending header info with <cfhttpparam type="header" name="host" value="www.mydomain.tld"> and it hasn't worked.
It may be important to know that the domain name is local only and relies on an entry in the hosts file, both on the browser machine and the server machine.
I have recently reconfigured the web server. Previously, each site had its own IP address, but now they are all the same and using host headers. Before, when each site had a unique IP, the cfhttp posts worked fine.
Is there a way to get them working in the host header configuration?
Thanks for replies.
- DonThe hosts file is used by the machine initiating TCP/IP communications to resolve an IP address from a domain name. It's not used by the server to resolve a domain name from incoming HTTP requests (how could it: many domain names could map to the same IP address?). The hosts file is a TCP/IP conceit; host headers are an HTTP conceit. They are only loosely related in that HTTP is transported over TCP/IP.
On your client some agent makes a request to a domain name (this can be any TCP/IP protocol, not just HTTP). The hosts file is checked to see if the domain name has a mapping, and if it does, the request is routed to that IP address. If there's no entry, then the standard DNS look-ups are made, and the IP address is found that way. But that's the only involvement in the request (or any sort of routed traffic) that the hosts file has.
Can you replicate this behaviour with <cfhttp> requests and other web servers, or is it just that one? IE: can you set up a web server in the lab which has the same web site / host header config, and see the same problem when making <cfhttp> requests? Does the web server log failed requests like this? Usually IIS's logs are website-centric aren't they? And if the request is not making to a web site, is it logged some other way?
Can you inspect the incoming request to see if any of the headers are bung?
Are you sure your host header for your website has the exact domain name the <cfhttp> request is... err... requesting? And that you're making the request on the same port, and IP address as the host header is configured for?
I really doubt <cfhttp> is the culprit here - at least in the way you're suggesting - because almost every web server in existence will be serving more than one website, and it's not like <cfhttp> usually has this problem...
Adam -
Problem with kernel panic message - Cannot boot from disk or usb
Hi Everyone,
I was wondering if someone could help me with a problem I've been trying to tackle for the last few days. I have a 24" iMac 2.33 Ghz Dual Core, with 2 gigs of RAM. A couple of days ago my computer crashed, and when I tried to boot up again I got the infamous grey screen kernel panic message ("You need to restart your computer..."). What's worse is that I get the same message when I try booting from my external drive and the installation disk itself.
I've basically planned on formatting since it's been a while anyway, but since I can't boot from my external drive or the installation disk that came with my computer these are not options at the moment. I can only get into the computer via safe mode. I've used disk utility to verify the disk, and it comes up with no errors. Anyways, I'd really appreciate if anyone had any advice on this. I've scoured the internet for advice about kernel panic messages, and they all suggest booting from disk or external drive etc., which is not a possibility for me right now.
ThanksIf you get a panic when trying to boot from the installation disc, and the disc is not scratched or dirty, then you have a hardware fault.
Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.
There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot into Recovery (command-R at startup) or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data. -
Problems with Kernel 2.6.31 and keyboard layout
Hello!
After upgrading my system with pacman -Syu I had lots of trouble!
1. New gdm ignores my fluxbox windowmanager! After severall reboots it worked suddenly: Don't know why!
I urgently missed gdmsetup!
2 xorg ignores my keyboard settings! I configured xorg.conf and /etc/hal/fdi/policy/10-keyboard.fdi. But no effect!
<?xml version="1.0" encoding="ISO-8859-1"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.keymap">
<append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
</match>
<match key="info.capabilities" contains="input.keys">
<merge key="input.xkb.rules" type="string">base</merge>
<!-- If we're using Linux, we use evdev by default (falling back to
keyboard otherwise). -->
<merge key="input.xkb.model" type="string">keyboard</merge>
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
string="Linux">
<merge key="input.xkb.model" type="string">evdev</merge>
</match>
<merge key="input.xkb.layout" type="string">de</merge>
<merge key="input.xkb.variant" type="string">nodeadkeys</merge>
<merge key="input.xkb.options" type="string">terminate:ctrl_alt_bksp</merge>
</match>
</device>
</deviceinfo>
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/util"
FontPath "/usr/share/fonts/OTF"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "Screen"
Identifier "Screen0"
# Device "Card0"
# Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Though "setxbdmap de" was working I downgraded to the previous kernel and gdm version!
I think testing cycle for new versions is definitely to short, or did I make serious faults!
Greetings JohannesI sort of had this problem for a while in a rescue usb drive I have, I couldn't make it work properly, but as root all was well (xfce was also acting a little strange as a user).
I just renamed the user home, deleted the user and created a new account, all fresh, just copied back some configs (firefox and the likes) and all was working well again ... no idea of what happened. I don't use a login manager, I just start xfce manually (it's a rescue drive I want to be able to change xorg.conf before starting X if needed). -
Problem with kernel panics - 2011 MBP running ML
Hey All,
Recently, I have been getting kernal panics randomly (with no external devices connected)
Here is the report:
Interval Since Last Panic Report: 239563 sec
Panics Since Last Report: 4
Anonymous UUID: F5EF4967-6GBD-7F1C-0D3E-F5428E1627A6
Wed Oct 17 00:27:16 2012
panic(cpu 0 caller 0xffffff800b6b7bd5): Kernel trap at 0xffffff800b6876fc, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000010028, CR3: 0x000000000d893000, CR4: 0x00000000000606e0
RAX: 0x0000000000000001, RBX: 0x0000000000010000, RCX: 0xffffff801e9c4aa0, RDX: 0x0000000000000821
RSP: 0xffffff80f367b800, RBP: 0xffffff80f367b820, RSI: 0x0000000029a0de7b, RDI: 0xffffff800ed39948
R8: 0x0000000000000001, R9: 0x0000000000000001, R10: 0xffffff8135b68000, R11: 0x00000000ffffff00
R12: 0xffffff800ed39948, R13: 0xffffff80f367baa0, R14: 0xffffff802da29e60, R15: 0x000000000001a000
RFL: 0x0000000000010206, RIP: 0xffffff800b6876fc, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000010028, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f367b4a0 : 0xffffff800b61d626
0xffffff80f367b510 : 0xffffff800b6b7bd5
0xffffff80f367b6e0 : 0xffffff800b6ce4ed
0xffffff80f367b700 : 0xffffff800b6876fc
0xffffff80f367b820 : 0xffffff800b681aa6
0xffffff80f367bb70 : 0xffffff800b65e1b4
0xffffff80f367bbd0 : 0xffffff800ba52e4f
0xffffff80f367bcc0 : 0xffffff800ba53052
0xffffff80f367bcf0 : 0xffffff7f8ce13434
0xffffff80f367bd60 : 0xffffff7f8ce0578c
0xffffff80f367bd70 : 0xffffff7f8cdea2e0
0xffffff80f367bdb0 : 0xffffff7f8cde8b4b
0xffffff80f367bde0 : 0xffffff7f8cdebd80
0xffffff80f367be00 : 0xffffff7f8c0d72a4
0xffffff80f367be20 : 0xffffff7f8c0d7237
0xffffff80f367be50 : 0xffffff7f8ce000b1
0xffffff80f367be80 : 0xffffff7f8cde920e
0xffffff80f367bed0 : 0xffffff7f8cde76c1
0xffffff80f367bef0 : 0xffffff800ba472a8
0xffffff80f367bf30 : 0xffffff800ba45daa
0xffffff80f367bf80 : 0xffffff800ba45ed9
0xffffff80f367bfb0 : 0xffffff800b6b26b7
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelHD3000Graphics(8.0)[EAD976F9-7469-3F17-AB8E-6A039213 8DCB]@0xffffff7f8cde4000->0xffffff7f8ce45fff
dependency: com.apple.iokit.IOPCIFamily(2.7.1)[9901C237-547C-3B52-99DE-C4870A19E2B5]@0xffff ff7f8bd50000
dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8c212000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8c1cf000
com.apple.iokit.IOSurface(86.0.3)[578CEAAD-1465-3B29-B34F-09586288ED88]@0xfffff f7f8c0d3000->0xffffff7f8c0e4fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C54
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000000b400000
Kernel text base: 0xffffff800b600000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 9268397460885
last loaded kext at 1059816226632: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7f8d231000, size 229376)
last unloaded kext at 285365763061: com.apple.driver.AppleUSBUHCI 5.2.5 (addr 0xffffff7f8bf91000, size 65536)
loaded kexts:
com.Cycling74.driver.Soundflower 1.6.2
com.jft.driver.PdaNetDrv 1.0.64
com.apple.filesystems.smbfs 1.8
com.apple.filesystems.ntfs 3.10
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.filesystems.autofs 3.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleIRController 320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.kext.triggers 1.0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.1
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i7, 2.8 GHz, 8 GB, SMC 1.68f98
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x029E, 0x434D5358344758334D314131363030433920
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x029E, 0x434D5358344758334D314131363030433920
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Network Service: Ethernet Adaptor (en3), Ethernet, en3
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R UJ-8A8
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 8
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3com.Cycling74.driver.Soundflower 1.6.2
com.jft.driver.PdaNetDrv 1.0.64
Delete the above software.
com.jft.driver.PdaNetDrv (possibly for a mobile device)
For SoundFlower try here > http://cycling74.com/forums/topic.php?id=39880
Maybe you are looking for
-
Missing application icon in applications folder
I drug my applications folder to my doc to make a shortcut and got the poof cloud. now all my icons are gone in Applications folder in finder and in all my time machine backups.how do I get them back. all I can find in trash is a folder called Recove
-
Deleted Data folder in iPhoto, now NO photos!
I just deleted my Data folder thinking it would free some space on my computer. Stupid, I know. I tried rebuilding my thumbnails and such but only have 7 photos to import (from my iPhone). Where did they go? And how can I restore them? I can view the
-
LSO offline player configuration
hi team, Could someone shed some light on LSO offline player post installation configuration. The standard installation guide doesn't talk anything about the offline player configuration. As per my knowledge, the offline player installed on the local
-
Function module for creation of Installed base along with product
Hi, Function module for creation of installed based with product for the business partner.
-
Since upgrade to Mac OS 10.7.2 Lion, on MacBookPro, recurring (every minute or so) error message: "There was a problem connecting to the server "servername". The server may not exist or it is unavailable at this time. Check the server name or IP addr