PPCC 2014.1 keyboard shortcut for source patching or track targeting???

Does anyone know if there's a keyboard shortcut for targeting tracks or else moving the "V1" and "A1" targets up and down the tracks in the timeline with the latest PPCC 2014.1 update???
I believe PPCC refers to it as "source patching". But looking through the vast keyboard shortcut list, I haven't found it.

Here's the shortcuts you want to be looking at... also Marks linked page has useful info on mouse operations.
The source assignment presets could prove useful too (although it would all get much easier if they would implement auto-patch...)

Similar Messages

  • Keyboard shortcut for source patching?

    Is there a way to assign a keyboard shortcut to control the source patching? the same way you can toggle the track target.

    This is not a real solution. I used to use source patching a lot when i edited on avid. It was part of my workflow. But on Avid i could assign a shortcut for each sourch track. No overlapping presets. I could do 1 - v1, 2 - v2, 3 - v3, 4 - a1, 5 - a2, 6 - a3. Each shortcut was independent. If i wanted to do this in premiere i would have to do a preset for each combination as if i were to press 1 I would have v1 selected and if i press 5 audio 2 would be selected overlapping my previous selecction insted of having v1 and a2 at the same time seleccted.

  • Source patching and track targeting, What is it mainly used for?

    Im reading adobe premier pro cc in a classroom book, and I still dont understand what source track and target track mean, or atleast what they are mainly used for.
    Why do people use it?
    In what work scenario is it mainly used in?

    ShooterNZ is right as far as Source Patching. It's intended chiefly for controlling which track(s) a clip lands on when inserted via shortcut, although it also affects behavior when dragging content to the timelines.
    Track targetting controls the Timeline's behavior for a variety of editing and selection actions. For example, the shortcut D selects one or more clips at the playhead. Try parking the playhead over two or more clips stacked in the Timeline, then target various combinations of tracks and see what happens when you press "D."

  • Keyboard shortcut for soloing a single track for track targeting

    Is there a keyboard shortcut that would allow me to solo one track for track targeting while turning off all others?
    Thanks!

    I dont think there is one that does both actions.
    There is one that will toggle tracks.though.
    I have those set up for video on keys 1 - 9  and audio on keys shift1 - shift 9.
    There is another available for "all" but I use Shift Click.

  • How to change keyboard shortcut for cycle through open tabs in PS and AI CC 2014

    I would love to set my own keyboard shortcuts for cycling through open tabs in PS and AI 2014 on OS X. I found out that this can be achieved with ctrl+tab in PS, but I couldn't manage to make any of the suggestions in the forum work for AI. As said, I would like to set a more "standard" shortcut like alt+cmd+arrow-keys for both of the apps. If that shouldn't be possible, does anyone know a shortcut in AI CC 2014?
    Many thanks!
    Amadeus

    Thanks! The shortcut can be set like this in AI, although all key combinations I would want to use are not allowed. Too bad. But anyways, thank you very much for the tip!
    cmd+~ is not an option for me, I guess, since the swiss/german keyboard layout has no dedicated tilde key.
    So, I have a working shortcut in PS (ctrl+tab / of which I still don't know how to change, if possible at all) and thanks to you, I can now set one in AI as well. Unfortunately, I can not set it to be identical as in PS, since the "cmd" key needs to be included in AI's shortcut assignment dialogue, but I guess, this is as good as it gets.

  • What is the keyboard shortcut for screenshot or print screen?

    what is the keyboard shortcut for screenshot or print screen?

    Taking Screenshots in Mac OS X
    Command-Shift-3: Take a screenshot of the screen, and save it as a file on the desktop
    Command-Shift-4, then select an area: Take a screenshot of an area and save it as a file on the desktop
    Command-Shift-4, then space, then click a window: Take a screenshot of a window and save it as a file on the desktop
    Command-Control-Shift-3: Take a screenshot of the screen, and save it to the clipboard
    Command-Control-Shift-4, then select an area: Take a screenshot of an area and save it to the clipboard
    Command-Control-Shift-4, then space, then click a window: Take a screenshot of a window and save it to the clipboard
    In Leopard and later, the following keys can be held down while selecting an area (via Command-Shift-4 or Command-Control-Shift-4):
    Space, to lock the size of the selected region and instead move it when the mouse moves
    Shift, to resize only one edge of the selected region
    Option, to resize the selected region with its center as the anchor point
    Source: http://guides.macrumors.com/Taking_Screenshots_in_Mac_OS_X

  • Disabling Keyboard Shortcuts for LDAP Accounts -Workgroup Manager...

    I work in a school and all our students are on LDAP accounts. Recently some of the kids realized that hitting Ctrl-Opt-CMD-8 inverts the screen display. You wouldn't believe the amount of havoc this has created at school, especially when they do it to a kid’s account that doesn't know how to fix it.
    Keyboard and Mouse are NOT one of the items under preferences for either groups or accounts in Workgroup Manager. Does anyone know if there is a way around this, or an alternate way of getting rid of the keyboard shortcuts for Universal Access, for either groups or accounts?
    Thanks
      Mac OS X (10.4.6)  

    Within the Workgroup Manager pane for Preferences, there is an option to manage Universal access. Within that section, there is a tab for 'Options'. You will want to change that management to 'Always' and leave the box for 'Allow Universal Access Shortcuts' UNchecked. This will, in effect, disable the usage of the shortcuts for a User or a selected Group account.
    Hope this helps out!!
    www.Admin660.com

  • How do I setup a keyboard shortcut for an item in the Services menu?

    In every Application, under the application menu is a "Services" folder. I would like to be able to setup a keyboard shortcut for one of these services (namely Skype).
    I am a heavy user of the "Services > Skype > Call" command and I would love to have a keyboard shortcut for it.
    I went to System Preferences > Keyboard & Mouse > Keyboard Shortcuts, clicked on the plus sign to create a new shortcut (all applications) and entered "Services…Skype…Call" and assigned it to a keyboard command (shift-F1).
    It doesn't work. Any clue as to what I am doing wrong?

    Hi
    Also - have a look at the reply I gave at the link below (sorry - don't know how to insert proper links here).
    May be of interest, maybe not.
    Best,
    D
    http://discussions.apple.com/message.jspa?messageID=7932030#7932030

  • How do I generate a list of keyboard shortcuts for any given application

    I want to generate a list of keyboard shortcuts for all of the applications I have on my Mac. I want the list to be a simple text (or rtf) file that I can edit and organize. (By edit, I don't mean change the shortcuts, only the report of them.)
    I was using Key Cue, but it does not let me save the list to a text file.
    I want this for several purposes. One is to have a easy to reference list of shortcuts to learn. Another is to find unused key combinations that I can use for my own keyboard shortcuts that I create with DefaultKeyBinding.dict.
    Note: The program doesn't have to an OS X app. A program that runs from a shell without a GUI is plenty adequate.
    If there is a way to read the keyboard commands from a plist list or other such file, and any of you know the format for these or where I can find them, I can write a Perl script myself to do it.

    Well, the info is stored in...
    /Users/YourUserName/Library/Preferences/com.apple.universalaccess.plist
    PlistPro has a way to convert it to ASCII, but you'll srtill have work to do, as...
    {enabled = 1; key = 20; modifier = 1179648; sybmolichotkey = 28; },
    {enabled = 1; key = 20; modifier = 1441792; sybmolichotkey = 29; },
    {enabled = 1; key = 21; modifier = 1179648; sybmolichotkey = 30; },
    {enabled = 1; key = 21; modifier = 1441792; sybmolichotkey = 31; },
    {enabled = 0; key = 28; modifier = 1572864; sybmolichotkey = 15; },
    {enabled = 0; key = 27; modifier = 1572864; sybmolichotkey = 19; },
    {enabled = 0; key = 24; modifier = 1572864; sybmolichotkey = 17; },
    {enabled = 0; key = 47; modifier = 1835008; sybmolichotkey = 25; },
    {enabled = 0; key = 43; modifier = 1835008; sybmolichotkey = 26; },
    {enabled = 0; key = 28; modifier = 1835008; sybmolichotkey = 21; },
    {enabled = 0; key = 96; modifier = 1048576; sybmolichotkey = 59; },
    {enabled = 1; key = 122; modifier = 262144; sybmolichotkey = 12; },
    {enabled = 0; key = 120; modifier = 262144; sybmolichotkey = 7; },
    {enabled = 0; key = 99; modifier = 262144; sybmolichotkey = 8; },
    {enabled = 0; key = 118; modifier = 262144; sybmolichotkey = 9; },
    {enabled = 0; key = 96; modifier = 262144; sybmolichotkey = 10; },
    {enabled = 0; key = 97; modifier = 262144; sybmolichotkey = 11; },
    {enabled = 1; key = 50; modifier = 1048576; sybmolichotkey = 27; },
    {enabled = 1; key = 98; modifier = 262144; sybmolichotkey = 13; },
    {enabled = 1; key = 50; modifier = 1572864; sybmolichotkey = 51; },
    {enabled = 1; key = 100; modifier = 262144; sybmolichotkey = 57; },
    {enabled = 1; key = 17; modifier = 1572864; sybmolichotkey = 50; },
    {enabled = 1; key = 2; modifier = 1572864; sybmolichotkey = 52; },
    {enabled = 0; key = 105; modifier = 0; sybmolichotkey = 32; },
    {enabled = 0; key = 109; modifier = 0; sybmolichotkey = 33; },
    {enabled = 0; key = 103; modifier = 0; sybmolichotkey = 36; },
    {enabled = 0; key = 109; modifier = 0; sybmolichotkey = 62; },
    {enabled = 0; key = 49; modifier = 1048576; sybmolichotkey = 60; },
    {enabled = 0; key = 49; modifier = 1572864; sybmolichotkey = 61; },
    {enabled = 1; key = 2; modifier = 1310720; sybmolichotkey = 70; },
    {enabled = 1; key = 49; modifier = 1048576; sybmolichotkey = 64; },
    {enabled = 1; key = 49; modifier = 1572864; sybmolichotkey = 65; },
    {enabled = 0; key = 53; modifier = 1048576; sybmolichotkey = 73; },
    {enabled = 1; key = 107; modifier = 0; sybmolichotkey = 53; },
    {enabled = 1; key = 113; modifier = 0; sybmolichotkey = 54; }

  • How do I change the keyboard shortcut for Cycle through open documents in PS CC for Mac?

    Sorry to bug the community with such a seemingly inconsequential task, but I am seriously tired of using the awkward default keyboard shortcut for cycling through open docs in PS.  I'd like to change it to what I am used in in Chrome, which is Cmd+Option+[left] or {right} arrow keys.  I noticed this is not a command listed in the in keyboard shortcuts, for whatever reason.  Where on Earth can I change this? 
    If it is not possible to do it by default, is there a plug-in or a change to the code that will allow this basic functionality? 
    Thanks again guys and gals!

    As far as I know, you can't. It's "hard wired" in.  Not even Edit > Keyboard Shortcuts is allowed  to change it.
    However I did find this tip:
    Anyway i never found tabs in Adobe application useful, instead i prefer the old school method: simply switch off tabs feature via illustrator/ preferences/ user interface/ open documents as tabs. Then in Mac preferences panel, under keyboard, just search for the “focus on next application window” field (under menu, keyboard and text) and assign a shortcut if the default option doesn't fit you. And there is now you can easily switch between open documents!.
    The best part of this is that it can be used in all mac applications, not only Adobe ones. And remember, if you want this working on Indesign, Photoshop, etc be aware of first switch off the tab features so that the system could “see” multiple documents opened not only one single tabbed document.
    Gene

  • Apple Mail creating a new keyboard shortcut for delete

    In Gmail I can hit the "D" key to delete saves much time. 
    In Apple Mail I have to hit the delete key which is on the right side of the keyboard and my right hand is busy with the track pad scrolling. I want to create a keyboard shortcut for delete something like option D any easy left handed shortcut will work.  Sys pref/keyboard shortcuts/mail doesn't work, Any suggestions?

    Hello!
    I don't know about mouse shortcuts, but you can put a delete button in the top bar of Mail, like so:

  • Keyboard shortcuts for text selection not working in Flash CC

    In the new Code Editor in Flash CC running on Mac OS X, most standard Keyboard Shortcuts for traversing through the text work as expected (as the Operating System works globally) but there is one that doesn't and it's I think the most important one.
    Hitting "OPTION + SHIFT + [right or left arrow keys]" to select words doesn't work. Hitting "OPTION + [right or left arrow keys]" works as expected, moving the cursor to the next word or break point, but adding shift doesn't do the selection.
    I don't understand why this changed since it's a basic OS global shortcuts, and every other program behaves the way it should. Flash CS6 running on the same system behaves fine, but Flash CC doesn't. If you have ever written code, you know that any second that a programmers hand doesn't have to leave the keyboard to search for the mouse is invaluable, and this has forced me to stop using Flash CC and use Flash CS6 to edit my Action Script classes becuase it's unusable otherwise.
    These shortcuts are also not listed in the keyboard shortcuts for the program, so I can't change the default behavior. Does anybody know if there's a way to set it back to the way it was before, or just disable special text shortcuts so that selecting text behaves like any other application in the operating system?
    System Configuration:
    Flash CC
    Mac OSX 10.8.5

    Amy~ Yep the lasso tool was what I verified with another user. 'L' seems to be bound indefinitely to loop through different types of lasso tools and it was annoying them because they just wanted L to be the regular freehand lasso. I removed 'L' from being an option on the polygon lasso and even set it explicitly to SHIFT+L as well as set the lasso tool to a completely different keyboard combo. 'L' still cycled through lassos haha. It needs some fixes.
    fertolg~ At least you have a workaround for now. I'd go nuts if I couldn't use keyboard text selection writing code, oy! You're welcome and if you're all set please mark correct so we can filter unanswered. Good luck!

  • What is the keyboard shortcut for extract page?

    There used to be a series of keyboard shortcuts for page manipulation (and other) - using acrobat 9 till recently. Now new to Acrobat XI Pro (Windows 8.1). I can see the shortcuts for insert & delete page but not for extract page (and other). Am I missing something? The keyboard shortcuts are a must for speed and a healthy right wrist.
    Thank-you for your time.

    There isn't a direct way of doing it, but you can "hack" it using a script. Create a folder-level script with this code:
    app.addMenuItem({cName: "MyExtractPages", cUser: "E&xtract Pages", cParent: "Edit",
        cExec: "app.execMenuItem(\"ExtractPages\");", cEnable: "event.rc = (event.target!=null)"});
    This will add a new menu item to the Edit menu which you could access using the following keyboard shortcut: Alt+E, X

  • What is the keyboard shortcut for "delete row" in a table?

    What is the keyboard shortcut for "delete row" in a table within a pages document?

    Click on the row number to select the entire row. Right-click, and select Delete Row from the menu. There is no keyboard shortcut.

  • What is the keyboard shortcut for format painting in word please?

    what is the keyboard shortcut for format painting in word please?

    Goto the menu bar, choose tools and choose customize keyboard.  you can then scroll down to format options and set a keyboard shortcut for the format option you are looking for.

Maybe you are looking for