PPCG4 hardware not supported

I've got a PPCG4 FW800 1.25GHz DP & 1.25GB RAM OSX 10.4.6 and ProKit 3.1 framework. When I try to launch Aperture 1.0 it tells me that my hardware isn't supported and quits.
The specs state that the app supports "1.25GHz or faster PowerPC G4 processor"
Any ideas appreciated?
PPC G4 FW800 1.25GHz DP 1.25GB RAM ATI Radeon 9000 Pro   Mac OS X (10.4.6)  

Correct, the machine is not adequate. IMO Apple's use of the term "unsupported by Aperture" is unfortunate, because the semantic implication is that Aperture does not "support" a particular box. As a consequence dozens of folks have posted wanting to know when Aperture will be modified to "support" their boxes; as if the engineers just need to write some code to facilitate each hardware configuration (like printer drivers; or enablers that fit the OS to specific boxes).
IMO it would be more clear if Apple just identified boxes like yours (and my tower) as "this hardware is not powerful enough to run Aperture."
Although some speed improvements on the software side (both OS and app versions) can usually be made, the basic issue is that it takes strong hardware to drive heavy graphics applications. E.g. the best 2005 Powerbooks were the first time Photoshop was really usable on any Powerbook, and that just "adequate."
Aperture (designed to handle batches of hundreds of RAW image files) requires strong hardware including the CPU, RAM, hard drives, etc. (and especially the GPU, as noted). In the long term, app designers always take advantage of the stronger power of newer boxes, so we should plan - like Photoshop users have learned through 9 versions - on buying the high end of Macs at any given point in time if we want to have adequate throughput power to drive future versions of Aperture, Photoshop, etc.
Note that my expectation is that by 2007-2008 heavy graphics apps will be wanting more RAM and strong GPUs. Buyers of boxes limited to 2 GB max RAM and/or lesser graphics should expect performance to be limited accordingly. E.g. Photoshop CS2 boxes already perform best when configured with 6-8 GB RAM.
-Allen Wicks
Early 2005 1.67 GB G4 PB, Radeon 9700, 128 MB VRAM, 1.5 GB RAM   Mac OS X (10.4.6)   D2x, DP G4

Similar Messages

  • 3750-E - hardware not supported by firmware

    Hello, I have got new 3750 e-series which has universal image installed on it. I need to put this switch in stackwise with non-e-series 3750. The problem is that non-e-series are running IP BASE IOS and I wanted to put the same IOS on 3750 e-series. But it gives me the following message when I try to boot the switch with c3750-ipbase-mz.122-35.SE5.bin image.
    Error: hardware not supported by firmware.
           Try loading newer software instead.
           System Resetting...
    Thank you!

    Hello, I have got new 3750
    e-series which has universal image installed on it. I need to put this
    switch in stackwise with non-e-series 3750. The problem is that
    non-e-series are running IP BASE IOS and I wanted to put the same IOS
    on 3750 e-series. But it gives me the following message when I try to
    boot the switch with c3750-ipbase-mz.122-35.SE5.bin image.
    Error: hardware not supported by firmware.
           Try loading newer software instead.
           System Resetting...
    Thank you!
    Hi,
    Catalyst 3750-E switches running Cisco IOS Release 12.2(35)SE2 are compatible with Catalyst*3750 switches and Cisco EtherSwitch service modules running Cisco IOS Release*12.2(35)SE. Catalyst 3750-E switches, Catalyst 3750 switches, and Cisco EtherSwitch service modules can be in the same switch stack. In this switch stack, we recommend that the Catalyst*3750-E switch be the stack master.
    Check out the below link for more information
    http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/software/release/12.2_35_se2/release/notes/OL9778.html
    Hope to Help !!
    Ganesh.H
    Remember to rate the helpful post

  • Bluetooth Headset Hardware not supported

    I have a Kensington USB dongle and I pasted the ASP info below. I can use it for pretty much everything except for using my headset. Does any one know of a way to enable this?
    I can't imagine why Apple would only support headsets on their bluetooth hardware. I read in this forum that a D-link dongle is supported, does it have any specific features that my Kensington dongle does not list in the Apple system profiler?
    Apple Bluetooth Software Version: 1.7.8f2
    Hardware Settings:
    tower:
    Address: 00-0c-55-f8-47-c6
    Manufacturer: Broadcom
    Firmware Version: 2.0 (2.26981)
    Bluetooth Power: On
    Discoverable: Yes
    HCI Version: 2 ($2)
    HCI Revision: 0 ($0)
    LMP Version: 2 ($2)
    LMP Subversion: 26981 ($6965)
    Device Type (Major): Computer
    Device Type (Complete): Desktop Computer
    Composite Class Of Device: 1057028 ($102104)
    Device Class (Major): 1 ($1)
    Device Class (Minor): 1 ($1)
    Service Class: 129 ($81)
    Requires Authentication: No
    Services:
    Bluetooth File Transfer:
    Folder other devices can browse: ~/Public
    Requires Authentication: No
    State: Enabled
    Bluetooth File Exchange:
    Folder for accepted items: ~/Documents
    Requires Authentication: Yes
    When other items are accepted: Ask
    When PIM items are accepted: Ask
    When receiving items: Prompt for each file
    State: Enabled
    Devices (Paired, Favorites, etc):
    Name:
    Address: 00-15-b9-8b-d6-57
    Type: Cellular Phone
    Services: HFP Gateway, Dialup Networking, Object Exchange, File Transfer, WBTEXT, HSP Gateway
    Paired: Yes
    Favorite: Yes
    Connected: No
    Incoming Serial Ports:
    Serial Port 1:
    Name: Bluetooth-PDA-Sync
    RFCOMM Channel: 3
    Requires Authentication: Yes
    Serial Port 2:
    Name: SerialPort-1
    RFCOMM Channel: 1
    Requires Authentication: Yes
    Outgoing Serial Ports:
    Serial Port 1:
    Address: 00-15-B9-8B-D6-57
    Name: Bluetooth-Modem
    RFCOMM Channel: 4
    Requires Authentication: No
    Serial Port 2:
    Address: 00-15-B9-8B-D6-57
    Name: SPH-A900-DialupNetworki-1
    RFCOMM Channel: 4
    Requires Authentication: No

    Dlink is STILL the only officially supported usb BT dongle and I have one and it works great if you only want 10m radius.
    I bought a Targus ACB20 (also known as ACB20us) because my GF wanted BT connectivity for her headset on her eMac. I realised AFTER that headsets were not supported for the Broadcom Chipset in this device.
    I found the answer here -> http://cbri.umn.edu/~kunau/?p=18
    this guy found a belkin patch for his device that allows broadcom chipset dongles to use headsets (YAY).
    here is the direct dl link for the file -> http://ccgb.umn.edu/~kunau/wp-content/uploads/2006/06/BelkinF8T012v-OSXdriver.zip
    This works fine with my targus dongle and another Anycom one I have (both 100m).
    Hope this works for you.
    Kez

  • Audio Hardware not supported by IDT Drivers

    Hi,
    I accidentally uninstalled my IDT Audio Drivers. Now my audio does not work at all. When I go to install the drivers suggested by the HP Software Support section, the drivers display this message during installation: "The hardware detected is not supported by this IDT software package. The install will be aborted."
      HP Pavilion g6 - 1a21ca Notebook PC
     Product Number:   LV993UA 
    Windows 7 (64-bit)

    Hi,
    The first option I'd suggest trying is to run Windows System Restore. 
    If you have Norton Internet Security installed, you will need to disable Norton Tamper Protection as shown on the link below.
    Norton Tamper Protection.
    Once you've done this, shut down the notebook.  Windows System Restore is usually best run in Safe Mode.  Tap away at f8 as you start the notebook to enter Windows Recovery Console.  Use the arrow keys to select Safe Mode and hit enter.  When this has loaded, from the Start Menu, click All Programs, click Accessories, click System Tools and launch System Restore.  Pick a restore point at least 24 hours before the original audio driver was deleted and then proceed with the restore process.  When complete, Windows will reboot as normal.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hardware not supporting old kernels!!

    Yesterday I bought M/board Asus P5V800 + Intel LGA775 Pentium 4 CPU
    http://www.asus.com/products4.aspx?l1=3 … odelmenu=1
    Either the new CPU (socket LGA775) or the M/borad, doesn't support Kernel-2.6.11 (my custom kernel) but the latest 2.6.16. I also tried Archie Live CD (2.6.x) and Knoppix 3.6 (2.4.x), doesn't work. In Knoppix booting freezes asking for "south bridge dma", in Archie no X support, and in HD no X and LAN support.
    In Windows, doesn't support Win 98. Runs but cannot install some of the board sources. Drive install CD for 2000 and XP only.
    <b>For my information, is this a common restriction of LGA775?</b>
    Note: End of the day I sold the hardwares and upgraded my old Celeron (socket 478) to Pentium. Pentium 4 with Celeron doesn't work well managing heavy multitask work. Compiling apps and at the same running X apps freezing the machine.

    Windows has shoddy driver support until 2000/XP.  I also found this out first hand trying to install Windows ME with what should be considered very old compatible drivers.  That's we me pops runs latest standard kernel with Arch Linux now.  It loves the hardware (not literally), but me pops loves the Arch.
    So, it goes, backwards compatible is easy, forward compatible depends on too many things like driver unification and just how shoddy the OS is (MS).  I'm just amazed at how much of a mule the OS can be when it has trouble recognizing hardware.  so I had this thread:  "I would rather spend a week causually installing/configuring arch than the rest of my life installing Windows ME."...or something to that effect.

  • Iphone 3s hardware not supported by Windows xp

    I plugged in my wife's iphone 3gs phone to update in Itunes.  I got a message from Windows that the hardware driver was not recognized.  I was able to get in Itunes and record my device.  It started updating.  I came back to an error message and now Windows refuses to recognize the iphone when I plug it in and Itunes will not pull up my phone as a recognized device either.  I see the iphone in backup but cannot restore it.  All my phone shows is a picture of the USB cord to connect to Itunes.  How do I get Windows XP to accept the Iphone hardware?  Please help me restore this iphone.  Thank you,

    Remove and reinstall iTunes. See: http://support.apple.com/kb/HT1925
    Disable your antivirus and firewall before updating or restoring the phone.

  • Hardware not Supporting Premiere Pro  CS5.5 (and after effects)

    Hardware: 1st generation Macbook Pro 2.0Ghz Intel Core Duo processor, 2g (maximum ) ram, 500gb hybrid SSD/7200 hard drive. Mac OS leaopard 6.6
    I bought the master collection recently which includes premiere and after effects CS5.5. Pre sales I was advised by adobe that ALL macbook pros will run all these products (by an adobe customer services Advisor)
    I can't load them because (as I have now learnt) that the core duo processor only supports 32 bit- I phoned technical support, many times since 15th July and was repeatedly told that ALL macbook pros can run them, it was just a case of changing my OS to 64 bit. Apple are clear that this is not the case.
    Eventually I was referred to a tier 2 advisor, who asked me which processor type, and finally said it is clear that I need earlier versions to run on this and I would be contacted by email to provide a earlier 32 bit version of these 2 programs (as is supplied to windows 32 bit users). This was 2 weeks ago and I have had no response, I have phoned several times and some advisors try to start the whole process again and insisting that I should be able to install these.
    Today an advisor has told me that they have checked the notes and the tier 2 advisor has advised I "need to upgrade my hardware" (ie buy a new mac !!!)
    No-one will give me any phone numbers of a tier 2 advisor to discuss this or complain about it. Nor an email address.
    First i want to request that adobe, having misled me, should give me earlier copies. Especially as this has already been agreed. Secondly I want to complain about the huge amount of time wasted and how I have been fobbed off.
    Apologies if this is not the exact forum space for it but I cannot find the issue on FAQ so I would be very grateful if anyone can put me in touch with the right person, or if any of the moderators would know.
    Michael Bannon

    8/17/11
    Case #0182568779: case update: 0206296078
    Withdrawn
    8/16/11
    Case #0206296078: Download Link
    Withdrawn
    8/2/11
    Case #0182523822: Unable to install After effects
    Withdrawn
    8/2/11
    Case #0182527143: Escalated case :182523822, 0206296078
    Withdrawn
    8/1/11
    Case #0182524205: installation issue
    Withdrawn
    Many thanks: these were the case numbers- these have all bee witthdrawn despite the fact none of them has yet provided the solution promised by the tier 2 advisor.
    Michael

  • Graphics Hardware Not Supported

    Just installed CS6 and wish to use the 3d option to create some text. However I get the window popup telling me that my graphics hardware is not officially supported for 3D.
    I have a Nvidia GTX Titan which has 6gb vram.

    mchief111
    Could you please post your system info listed in Photoshop's Help > System Info dialog box?
    Click Copy, then paste it in a response here.
    That will help us determine further what's going on.
    Allow me echo the interest in making sure the latest nvidia driver is applied
    http://www.nvidia.com/Download/indexsg.aspx?lang=en-us
    Your video card: NVS (notebooks) -> NVS 4200M
    Also give the forcing Photoshop.exe to use the nVidia video card in the NVIDIA Control Panel
    Right click desktop -> NVIDIA Control Panel
    Manage 3d Settings category -> Program Settings tab
    under the 1. "Select a program to customize" drop down menu: select Photoshop.exe
    for 2. Select the preferred graphics processor for this program: select High-performance NVIDIA processor
    Click the Apply button that appears in the lower right.
    You will need to reset Photoshop's preferences as well for it to look for your video driver changes.
    To do this, immediately after starting Photoshop.exe press and hold Ctrl+Shift+Alt
    Click Yes to reset the Photohsop Settings file.
    Let us know how it goes from there.

  • What does the "graphics hardware not supported" error mean?

    Photoshop detected graphics hardware that is not officially supported. If you experience problems, please uncheck the Use Graphics Processor checkbox in the Performance panel of the Preferences dialog.
    My system:
    Mac Pro
    2 x 2,66 GHz Dual-Core Intel Xeon
    10 GB 667 MHz DDR2 FB-DIMM
    ATI Radeon X1900 XT 512 MB
    Mac OS X Lion 10.7.3 (11D50b)

    It looks like you have a video card that is not officially supported in CS6.
    Here is a link to the FAQ on GPU features and supported cards:
    http://forums.adobe.com/message/4289204
    Check out the instructions on turning off OpenGL. You won't be able to access certain features that use the GPU, but you will no longer see the error message.

  • I am getting the photoshop has detected graphics hardware not supported for 3d...without 512 vRam. I have enough and yet it still gives me the error. I have ATI Radeon HD 2600 Pro 256 MB installed and can't find any updates on adobe? What gives?

    Where do I find the update?

    Well, which school did you attend to justify your crooked math? When I was at school 256 was less than 512 or exactly half of 512... This simply won't work and nobody can fix it for you. Your graphics hardware is simply completely inadequate, considering that it is like 7 years or so old to begin with.
    Mylenium

  • Server hardware not supported

    I added in some b200 M4 blades into the UCs chassis and tried to reack the slot.
    but got this error. I am running ucsm 2.1(3a)
    any idea?

    Hi Tony,
    This message is expected as the B200M4 requires a minimum firmware of 2.2(3a) see below.  To resolve this issue you need to upgrade the UCS infrastructure firmware to at least version 2.2(3a)
    Table 4 Internal Dependencies
    http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/ucs_2_2_rn.html#pgfId-226104
    Let me know if this helps

  • Apple USB Modem Not Supported in Snow Leopard Running 64-bit Kernel Mode

    Has anyone been able to get the Apple USB Modem to work with Snow Leopard (SL) when running SL in 64-bit kernel mode? I get an error saying hardware not supported.

    I would suggest you take this question up in the MacBook Pro forum or perhaps the Snow Leopard forum. This forum is for question about older, Pre-G3 Apple hardware and so not the forum where you'll be most likely to get a quick and applicable response.
    Regards.

  • Not supported hardware to boot from disk

    Hi everybody
    I have a problem by installing windows vista ultimate on my mac pro. All four disk bays contain the same harddrive (Samsung HD501LJ). Bay 1+2 are configured in a RAID0 array,. Bay3 is a native disk for windows and bay4 is used for the new timemachine feature under Mac OS X Leopard.
    I have partitioned the drive with "Mac OS X Extended (Journaled)" and set up a second parition with boot camp assistent for windows vista (MS-DOS; 32GB).
    In the windows installation wizard, the partition was recognized as "Drive 3, Parition 2 - BOOTCAMP). To boot from this disk, windows vista needs NTFS formatting, so I have run the "Format" Wizard, which was successful.
    After this step, the setup returns the following error:
    "This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computers's BIOS menu."
    "Windows is unable to find a system volume that meets its criteria for installation."
    Anybody an idea, what's going wrong here?

    Thanks for you reply.
    I have also tried to install windows vista on a single partition/harddrive. Bootcamp fromats the drive with FAT32, the vista installer do the rest and format the drive with NTFS. The result is the same. Diskspace is now 450gb (hole disk)
    Could it be, that the raid0 array for my os x 10.5 make troubles? The drive on which I want to install windows, is not in this raid0 array!
    Or do I have to install 64bit-os-version for my mac pro? (xeon 64bit cpus)

  • I am new to apple hardware, and since upgrading software on my iphone 4S I receive this message.  "this accessory is not supported by this iphone" when using my clock radio docking station. Is there away around this?

    I am new to apple hardware, and since upgrading software on my iphone 4S I receive this message.  "this accessory is not supported by this iphone" when using my clock radio docking station. Is there away around this?

    Hello GuynStPete,
    Thanks for using Apple Support Communities.
    I found the following support article that has some troubleshooting steps for you to follow in order to resolve this issue you're experiencing:
    Resolve issues with iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Take care,
    Alex H.

  • HT1338 Serial # W87*****Z67 OS 10.7.4 is my late 2007 MacBook Pro (black) but when attempting to purchase X Lion upgrade I get message that hardware is not supported. But X Lion tech spec says mid to late 2007 Macbook pros supported. Any thoughts?

    Serial # W87*****Z67 OS 10.7.4 is my late 2007 MacBook Pro (black) but when attempting to purchase X Mountain Lion upgrade I get message that hardware is not supported. But X Mountain Lion tech spec says mid to late 2007 Macbook pros supported. Any thoughts?
    <Edited by Host>

    See  babowa Post Here... on Compatibility...
    https://discussions.apple.com/thread/4136749?tstart=0

Maybe you are looking for

  • Why is Bonjour Missing for my SKYPE Freetalk Install?

    I am attempting to install SKYPE Freetalk on my Mac OS10.7.4. I am supposed to go to Safari, find the Bonjour Bookmark, and open it. There is no Bonjour Book there. Thanks in advance for any assistance. Meanwhile, I will keep looking on Safari for so

  • I cannot open dreamweaver CS4

    I cant open the program on my laptop, which is windows vista, I have no probs of opening the same prog on my new PC which is also windows vista (I also have no probs with my old PC which is windows xp).

  • Script for retraction button

    HI ,     I need to do retraction using a button in Wad - it should call a class , this executes and data is pushed through an XI system and flushes the data in ECC box. if you could give the jave script code it would be really helpful. thanks Edited

  • Pdf showing as picture

    I don't understand how to configure or why it is happening, but I have my company mail installed in both, my iphone and ipad. On the iphone I can see pdf attachments in a normal way. Shows as attachment and I have to click on it in order to open it.

  • No support for downloading MP4 into Itunes library

    Hi! There seems to be a lot of questions on what to do if Itunes won't add MP4 movies. (I'm having this problem also). Does anyone know who to contact if we can't get an answer in these forums?