PPCI Create customer PD infotype

Hello,
I tried to use TA PPCI to create a new customer infotype. I was ask to create entries in table T777D and TDCT. If I wanted to create a new dialog module (SE35) the system didn't allow that because TA SE35 is obsolet. But to test or use the infotype with TA PP01 or PPDM the system says there is no entry in table TDCT.
Could anybody explain to me, how to create new customer PD infotypes or how to create an entry in table TDCT.
Many thanks
Albrecht Friedrichowitz

check this link:
http://help.sap.com/saphelp_erp60_sp/helpdata/DE/42/51c05a4a1211d182b80000e829fbfe/frameset.htm

Similar Messages

  • PA - Creating customer specific infotypes

    Hello experts,
          How to create customer specific infotype in PA? i tried creating in PM01, but it is not getting reflected in PA30. is there any other method to create customer specific infotype? or do i have to copy from standard infotypes? If you can send me any document it will be really helpfull. my email id is [email protected]
    Thanks and Regards,
    Shilpa

    Hi
    would you mind forwarding the documents to me as well
    my mail id is [email protected]
    Thanks in advance
    Regards,
    RK

  • How to create customer specific InfoTypes in CRM?

    Hi folks,
    we want to distribute customer specific InfoTypes from HR to CRM. Thus we have to create these InfoTypes in CRM. Does anyone know how to do so? In HR this is done with TA PM01 which does not exist in CRM.
    Thanks!
    Martin

    Martin,
    Yes I think just using a BADI and storing in custom tables is the easiest approach in your case.  However if these infotypes are employee data contained in personnel administration, then you should consider extending the Business Partner via the eewb.  You would still then enhance the IDOC and then extend the data transfer to the new attributes in CRM.
    If it is just organizational data attributes, then you can either do custom tables, or try to create new infotypes via manual configuration in the CRM system.
    Take care,
    Stephen

  • PPCI: Create customer info type

    Hi,
    I tried to create a new info type for OM. I used PPCI but get the following error.
    Any ideas why i can't successfully create info type 9010
    Structure HRI9010 exists
    Structure P9010 does not exist
    Table HRP9010 does not exist
        HRP9010 not created in the database
        Database index XXXX not created
    Module pool
    Module pool MP901000 does not exist
    Include MP901020 does not exist
    Include MP9010BI does not exist

    hi
    this link might be useful
    how to create OM Infotype
    Regards
    sameer

  • Create Custom Infotype using PPCI

    Hi,
    My requirement is to create an HRinfotype . I am trying to create a new custom infotype (9500) via transaction PPCI, categeory   when i select the option user should use Transaction PO10 and choosing the org unit, user should be able to choose my custom Infotype 9004 “Site type and Industry” and select Create/Edit/Delete.
    For this we follow the below given steps :-
    Step1: Create structures as mentioned in the HRI9004
    Step2: Using transaction PPCI create field infotype.
    Step3: In table T777I assign the new infotype to the standard object type Org unit and define the time constraint.
    Can any body help me or send me any document to start from step 2 . i.e Using transaction 'PPCI' .

    Hi,
    Look into the path below
    http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/PAXX/PYINT_INFOTYP_PD.pdf
    Regards
    Pavan

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • Create Custom HRInfotype type, Tcode : PPCI

    HI Guys
       My requirement is to create an HRinfotype . user should use Transaction PO10 and choosing the org unit, user should be able to choose my custom Infotype 9004 “Site type and Industry” and select Create/Edit/Delete.
    For this we follow the below given steps :-
    Step1:     Create  structures as mentioned in the HRI9004 
    Step2:     Using transaction PPCI create field infotype.
    Step3:     In table T777I assign the new infotype to the standard object type Org unit and define the time constraint.
    Can any body help me or send me any document to start from step 2 . i.e Using transaction 'PPCI'   .
    w

    Hi Manoj
       I did try this step . My problem is I had already created an infotype '9004'  then i deleted DD objects and i also did 'Shift + f2'  . Now when i am trying to create 9004 infotype . It says "Infotype 9007 cannot be created
    Please look at the following log"   and log  displays the below Given DD objects
    Infotype 9007                                                                               
    Dictionary                                                                               
    Structure HRI9007 exists                        
               Structure P9007 does not exist                  
           Table HRP9007 does not exist                                                                               
    HRP9007 not created in the database         
                   Database index XXXX not created                                                                               
    Module pool                                                                               
    Module pool MP900700 does not exist             
               Include MP900720 does not exist                 
               Include MP9007BI does not exist                                                                               
    Screens                                                                               
    Screen 1000 does not exist                      
               Screen 2000 does not exist                      
               Screen 3000 does not exist                                                                               
    User interface                                                                               
    User interface for MP900700 does not exist        
        Table entries                                                                               
    T778T: no table entries exist                     
             T777T: no table entries exist                     
             T777D: no table entries exist                     
             T77ID: no table entries exist                     
             T777I: no table entries exist                     
             T777Z: no table entries exist                     
             T77OA: no table entries exist                     
             T777M: no table entries exist                     
             T778U: no table entries exist                     
             T777U: no table entries exist                     
             T77NI: no table entries exist                                                                               
    SOBJ entries                                                                               
    OBJECT PDST: no table entries exist               
             OBJECT PDWS: no table entries exist                                                                               
    Dialog module                                                                               
    Dialog module RH_INFOTYP_9007 does not exist   
        TADIR entries                                                                               
    R3TR TABL HRI9007 does not exist               
             R3TR TABL P9007 does not exist                 
             R3TR TABL HRP9007 does not exist               
             R3TR PROG MP900700 does not exist              
             R3TR PROG MP900720 does not exist              
             R3TR PROG MP9007BI does not exist              
             R3TR DIAL RH_INFOTYP_9007 does not exist                                                                               
    Could you give me some solution or else try the same steps . Create infotype - Delete infotype and DD objects - Then try creating the same.

  • Cant  we create a custom PA infotype whose size is more than 1000 chars?

    can we create a custom PA infotype whose size is more than 1000 characters
    i have tried this way i have given 4 fields in PM01 transaction with the data element 255 so the total size is 1020 it is throwing an error. pls help......

    Hi,
    as described in the following documentaion the length of the data could be 1500 bytes.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/d526be575e11d189270000e8322f96/content.htm
    Regards
    Bernd

  • How we create custom infotype and how to configure with its subtypes.

    hai abap-hr gurus,
    how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
    plz help me for this with an example code.
    thanks..
    kiran kumar

    Hi Kiran,
        Please fallow the below steps to create the custom infotype. If you have any quires let me know.
    For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
    then select the `Employee Infotype' radio button
    after that select the `PS Structure Infotype'
    then click on Create… A separate table maintenance window appears
    then Create a PS structure with all the fields you want on the infotype
    Save and Activate the PS structure
    now Go back to the initial screen of PM01
    Click on `All' push button. It takes a few moments
    Click on `Technical Characteristics’. Infotype list screen appears
    Click on `Change'(pencil) button
    Now select your Infotype and click on `Detail' (magnifying glass) button
    Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
    Give your subtype field as subtype field & Save and come back to PM01 initial screen
    Click on `Infotype Characteristics' … Infotype list screen appears
    Click on `Change' (pencil) button & on New Entries
    and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
    to fill yours). Now save ur entries
    Now the Infotype is created and ready to use.
    If you want to change the layout of the Infotype as per your
    requirement…
    In the PM01 initial screen…Select `Screen' radio button and give
    2000 as the screen name, then click on edit.
    In the next screen.. Select `Layout Editor' and click `Change'.
    Screen default layout appears…here you can design/modify the
    screen..change the attributes of the fields..etc.
    Save and activate. (Don't forget to `Activate at every level)
    Regards,
    Ramakrishna kotha.

  • Creating Custom Infotype -  Personnel Administration - ABAP-HR

    What are the steps while creating custom infotype in PA Subodulein ABAP-HR?

    Hi,
    Welcome to SCN. I've moved your post to a more appropriate place where there is more likelihood of the question being answered.
    Be sure to read the "rules of engagement" for the forums and do search before posting.
    I found below thread and link with simple search:
    Infotype enhancement - Short dumps (PA30 / PM01).
    http://www.sap-img.com/human/how-to-create-a-hr-infotype.htm
    Regards,
    Naveen

  • ABAP-HR - CREATING CUSTOM INFOTYPES

    While creating custom infotypes, what happens when we click "All" Push button in 2nd phase in PA Submodule?

    Why not try it and find out.  Oh, and don't post in all CAPITALS.

  • Error imparting while creating Customized infotypes

    Dear Expert,
    I am working on customized infotype for the PA module.
    i am creating through PM01, i have update the fields and save, check and activate the structure then i go back to PM01 main screen the following warning massage imparting. for reference following screen shot
    But still i go back and click on technical attribute button for the maintain the details. the new warning massage
    Please help me out how to resolved this issue, i am unable to do the customized infotypes.
    Thanks
    Urvashi

    Hi Urvashi,
    The field names of your infotypes better have to start with ZZ* like ZZWRITE or ZZREAD. This would avoid 2 warnings.
    The other 2 warnings are caused because you didn't set an enhancement category for your structure PS9002.
    If you're creating a new infotype, please use the button "generate objects" in place of edit.
    Afterwards, you could go to each step with the edit button.
    Best regards,
    Jonathan

  • Creating custom infotype

    Hi,
    I want to create a custom infotype with the following fields.
    Molga (country grouping)
    Personnel Number
    Subtype
    Language Key
    Comment Line 1
    Comment Line 2
    Comment Line 3
    in this first 4 fields are keys. The user should be able to edit only the rest of the fields.
    Subtypes similar to the infotypes values 0168,0169,0014,0015,0009,0006,0002 should be created.
    While updating and saving the infotypes 0168,0169,0014,0015,0009,0006,0002 the system should prompt this infotype through dynamic action to enable the user to enter comments.
    can anyone give me a step by step approach for creating this infotype?
    Thanks in advance...
    Vijay

    Hi
    Steps to create a HR Infotype:
    1) Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the 'Employee Infotype' radio button.
    4) Select the 'PS Structure Infotype'.
    5) Click on Create... A separate table maintenance window appears...
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on 'All' push button. It takes a few moments.
    10) Click on 'Technical Characteristics'. Infotype list screen appears
    11) Click on 'Change'(pencil) button
    12) Select your Infotype and click on 'Detail' (magnifying glass) button
    13) Give 'T591A' as subtype table
    14) Give 'T591S' as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on 'Infotype Characteristics' ... Infotype list screen appears
    18) Click on 'Change' (pencil) button
    19) Click on 'New Entries'
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirement...
    25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select 'Layout Editor' and click 'Change'.
    27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Don't forget to 'Activate at every level)
    Subtype Creation :
    Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
    Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
    Subty.text tab is T591S and time const tab is T591A.
    See:
    http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
    HR related site:
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    Enhancement of Infotype
    Check the following
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
    Infotype Enhancement overview screen
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
    Regards
    Anji

  • Error in creation of custom PD infotype

    Hi,
    I have a task of creating a custom PD infotype(p9xxx). I created HRI9xxx structure with all the custom fields and when I try to create the infotype using tcode PPCI(selected 'field infotype' option and create button in the 'infotype' block was pressed), it gives an error message that p9xxx-begda is not in ABAP dictionary and then it gives me list of screens, module pools and tables created. This custom infotype entry does not exist in T777I. I have tried regenerating it and same problem persists. If anyone knows the solution, please do let me know.
    Thanks in advance

    Solved.

  • Custom OM Infotypes

    I am having issues creating a custom OM Infotype. I created my HRI9000 structure in SE11 and then went to transaction ppci to create the infotype when I follow the steps to do this the screens and table entries are not getting populated automatically. I couldn't find any documentation on how to get it to do it automatically so I decided to create the screens and table entries myself. Now however, if I go to po13 to add this infotype to a position when I hit the save button nothing is happening. Any help on fixing this issue or the original issue of why the entries are not creating by themselves would be greatly appreciated.
    PS I saw a previous article from a few years ago on this same issue of the screens not getting created but it was never answered.
    Stephanie

    Hi,
    First delete the infotype from PPCI. Then click on Check and see if ALL the entries are deleted. You can delete the Table entries manually. If you are having trouble deleting the TADIR entries, follow these steps:
    To delete the TADIR entries, Go to SE03 --> object Directory --> Change Object Directory Entries. Here Check all options and put the name of the corresponding TADIR entries that you want to delete in the right hand side boxes. Then execute.
    After they are deleted one more time delete Infotype from PPCI. then when you check, all the TADIR entries should be non-existing.
    Lastly delete the HRI9000 structure. Once all is deleted, create the Infotype from scratch.

Maybe you are looking for

  • Illustrator and other CS4 Apps crashing in snow leopard

    Hello, Just upgraded from 10.5.8 to 10.6 and am having some very serious CS4 issues. I first noticed in flash when it constantly kept crashing on save. Now it seems that same issue is also on Illustrator durring open or save or export. I went over to

  • UISearchBar with a mask on the content view?

    Hi, is it possible to make a mask placed on top of the content view when using the UISearchBar, like the BG mask of the UIAlertView? coz I wanna block the interactions from the content view while it is in the search mode. Thx Cody

  • .mp4 white screen

    My apologies is this has addressed before. I have read the forum extensively and have not seen this problem addressed. I am trying to play .mp4 files. I have followed the tech article Exploring Flash Player support for high-definition H.264 video and

  • Getting children of tile list

    Hi, I have a tile list as follows, if i want to hide the third item in the tile list how can i do so? I can't seem to target the children of the list. <mx:TileList x="1" y="1" height="568" width="98" id="palette_list" dataProvider="{Application.appli

  • Im getting ready switch to a new iphone will all the txt messages back up and transfer to the new iphone?

    i need help in backing up my iphone