PPCI - Problem in Creating Infotype

Hello Expert,
I want to create OM custom infotype,but in T.code - PPCI afte entering necessary entries when clicked on Create m getting follwing log .Please let me know whether i am doing any mistake :
Infotype 9501
       Dictionary
           Structure HRI9501 exists
           Structure P9501 exists
           Table HRP9501 does not exist
               HRP9501 not created in the database
               Database index XXXX not created
       Module Pool
           Module pool MP950100 does not exist
           Include MP950120 does not exist
           Include MP9501BI does not exist
       Screens
           Screen 1000 does not exist
           Screen 2000 does not exist
           Screen 3000 does not exist
       User interface
           User interface for MP950100 does not exis
       Table entries
           T778T: no table entries exist
           T777T: no table entries exist
           T777D: no table entries exist
           T77ID: no table entries exist
           T777I: no table entries exist
           T777Z: no table entries exist
           T77OA: no table entries exist

Hi,
Before calling transaction PPCI you need to create the HRC9XXX structure via SE11.
Then you can carry on to PPCI - Create.
When you have the log of tables to be maintained, please make sure you have updated the tables T777I, T777D, T770A
Regards,
Dilek

Similar Messages

Problem in creating 0027 infotype record in background

Hi Experts,
I am facing the problem in creating 27(Costs distribution) infotype record in back ground.
Whenever there is a change in position of the employee or when we hire a new employee (Through PA40)
i have to ctreate 0027 infotype record in background.For that i am using IN_UPDATE method of BADI
HRPAD00INFTY.
Here i am getting 2 problems.
1. I am unable to get the latest positions that is assigned to the employee.
Through NEW_IM AGE structure we can get the latest position but if a person is assigned to multiple positions for the same period then i am getting only one position from NEW_IM AGE but not all.can any body help me?
2. I am calling HR_INFOTYPE_OPERATION FM to create the IT0027 record in background in the above method (IN_UPDATE). but it is not updating the PA0027 table. any idea?
Full points will be rewarded.
Regards,
Sai.

I am sending a sample program , which is on infotype 0105 (communication). I hope that this program will help u out............
REPORT ZSAPHR_SAMP.
tables: pa0105.
infotypes: 0105.
DATA : I_RETURN TYPE BAPIRETURN1,
I_KEY TYPE BAPIPAKEY,
PERNR TYPE P0001-PERNR,
I_P0105 TYPE TABLE OF P0105 WITH HEADER LINE,
ENDDA TYPE P0105-ENDDA,
BEGDA TYPE P0105-BEGDA.
MOVE '00000010' TO PERNR.
BEGDA = SY-DATUM + 1.
ENDDA = SY-DATUM + 1.
i_p0105-pernr = PERNR.
i_p0105-infty = '0105'.
i_p0105-subty = '0002'.
i_p0105-endda = ENDDA.
i_p0105-begda = BEGDA.
I_P0105-USRTY = '0002'.
I_P0105-USRID = '[email protected]'.
APPEND i_p0105.
CALL FUNCTION 'DEQUEUE_ALL' .
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
NUMBER = PERNR.
IF SY-SUBRC = 0.
WRITE 'Employee Locked Successfully'.
ENDIF.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
INFTY = '0105'
NUMBER = PERNR
SUBTYPE = '0002'
VALIDITYEND = BEGDA
VALIDITYBEGIN = ENDDA
RECORD = i_p0105
OPERATION = 'INS'
TCLAS = 'A'
DIALOG_MODE = '0'
NOCOMMIT = 'X'
IMPORTING
RETURN = I_RETURN
KEY = I_KEY.
IF SY-SUBRC = 0.
WRITE : 'FM returns sy-subrc 0'.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
EXPORTING

ABAP HR How to create infotype with table control in it like Infotype 0008

Hi Experts.
I need help from u guys. My client requirement is to create custom infotype just like 0008 infotype which contain table control to save amount and wage types. I try to create infotype with table control using PM01, but that table control is in display mode only, i almost search every where to create custom infotype with table control but what ever threads in forum all are they unanswered and most of the threads for creating infotype. But i already done with infotype , but my main problem is table control.
If any one have some suggestion for this please share with me.
<removed by moderator> i am looking for positive reply.
Edited by: Thomas Zloch on Aug 30, 2011 12:54 PM

Hi
I've created several infotypes with a Table Control and it is always the same story. You have to create a custom Z table to store the Table Control data (if you can have unlimited records), so in the PSXXXX structure you need to add a TABNR field to link the PAXXXX table and the Z one, just like the type table OM infotypes.
Then in your code you have to control every possible operation, INS, MOD, DEL... and update the Z table accordingly (the standard code won't do that)
If your TC fields appear in display mode, take a look at the Groups 1 and 3 in your fields, the must be set with the usual values for a PA infotype.
If you have more questions, just ask,
Regards

Problem in custom infotype.

Hi friends,
I have two problem on creating custom infotype 9010.
The infotype has 4 field:
docu_type -> subtype field
Docu_number
cost -> DE:WAERS
cost_curr -> DT: Curr length 10 dec 2
I referred the cost to the cost_curr field of the infotype 9010
First Problem
The infotype is created but when I tried to enter the cost via pa30
put 50 on it, and press enter, 50 will be changed into 5000. But when I re-enter again, the ammount remained unchanged.
2nd Problem.
For the infotype i need to give a further information on the screen.
Such as that, it looks like the screen on IT0022 where when you put the educational establishment, the text of the subtype appears beside it. How do I suppose to do things like that with my infotype so that when I enter 4 as the subtype field, the subtype text appears.
Thanks

prob 1 .
what is the reference field u have given for the currency of ur 9010 table .. just check the reference field u have given for currency ..
how are u handling this in the pai part of the code , can u just make the field pass to a char field and then reassign it to the screen field .. for primary investigation.
prob 2.
u need to maintain a field just adjacent field in the layout as ouput field only . and populate this field with the suitable text once u enter the subtype field which is input field .
this u need to do in the pai part of the infotype mp901000 code ..
if p-styp is not initial .. "subtype is present fire the text part .
populate text to screen field p9010-stxt.
endif.

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

Facing some problems in creating a custom tabs in CRMD_ORDER Transaction

Hi Friends,
I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP.
Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put one tab i.e header tab but i was not able to keep item tab. i found a badi CRM_CUSTOMER_I_BADI in which documentation was given & i processed in the same way.
For information i used the Badi CRM_CUSTOMER_H_BADI for header tab which i was able to add the tab & all functions like change, save working Good.
But i want how to add custom tab in which item details were to be attached.
i was done with the necessary SPRO settings(or Tcode CRMV_SSV) & able to see the 2 tabs thats it, but the functionality save is not working for the second tab & not saving in table CRMD_CUSTOMER_I (in this table there is one CI include where we added our item fields).
And also i had a doubt whether to use ALV or Table Control. And if possible can any one can sent me the screen design & the code for the above requirement in detail.
can any one who have knoweldge in Solution Manager & in the above Badi implementation can give me a right solution which will help me a lot.
Thanks a lot in advance.
Thanks
Ravi.
can any one give the solution regarding to the above one.
Edited by: ravikanth on Jul 23, 2008 8:13 AM

Hello Priyanka,
I have the same problem by using Service Ticket in SAP CRM 5.0.
Did you already solved this issue? If so, can you please provide the solution!?
How can I activate and check the transfer log?
Thanks and regards
Alex

Facing problem in creating socket in a method from an already deployed application exe while same method is working from another exe from same environment from same location.

Dll Created In: - MFC VC
6.0
Application Exe Developed In:
- VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit
/ Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component which
has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting Error
code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming on
client side so what we did, we created a driver in C# which invokes same method from same environment(on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest: -
We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not working,
actually it is not executing Create () method,
I will give snippet of the code for understanding the problem because we are not finding any kind solution for it.
Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
DWORD errorCode = GetLastError();
CString errorMessage ;
errorMessage.Format("%lu",errorCode);
ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
return IS_ERR_WINDOWS;
Note: -
CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
if(!Create())
ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
return NET_INIT;
ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
if(!AsyncSelect(0))
n_Err = GetLastError();
return NET_INIT;
if(!Connect(strIP,n_Port))
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS","");
return SERVER_NOT_CONNECTED;
Code description: -
From
int GETImage_MT() method we call Initialize() method and pass client machine IP and Port and there we call
ConnectTS() method, In this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System
0
Note: - According to logs, problem is coming in Create method().
Here 0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll
from different exe, it is working fine and we are facing any kind of problem. While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.

Pointer variable was already initialized; I have mention in code; kindly assist us.
Dll Created In: - MFC VC 6.0
Application Exe Developed In: - VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit / Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component
which has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting
Error code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming
on client side so what we did, we created a driver in C# which invokes same method from same environment (on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest:
- We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not
working, actually it is not executing Create () method, I will give snippet of the code for understanding
the problem because we are not finding any kind solution for it. Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
                   DWORD errorCode = GetLastError();
                   CString errorMessage ;
                   errorMessage.Format("%lu",errorCode);
                   ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
                   return  IS_ERR_WINDOWS;
Note: - CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
          ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
          if(!Create())
                   ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
          n_Err = GetLastError();
          ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
                  return NET_INIT;
          ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
          if(!AsyncSelect(0))
                   n_Err = GetLastError();
                   return NET_INIT;
          if(!Connect(strIP,n_Port))
                   n_Err = GetLastError();
                   ErrorLog(n_Err,0,"ConnectTS","");
                   return SERVER_NOT_CONNECTED;
Code description: - From int GETImage_MT() method
we call Initialize() method and pass client machine IP and Port and there we call ConnectTS() method, In
this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System  0
Note: - According to logs, problem is coming in Create method(). Here
0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll from different exe, it is working fine and we are facing any kind of problem.
While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.

Problem in creating a WebService

hi ... i am having a problem in creating a web service using netbeans .. i am using net beans 6 and glass fish v2 ... when i run the clinet appllication an exception comes that is
javax.xml.ws.WebServiceException: Provider com.sun.xml.ws.spi.ProviderImpl not found
but i have followed right steps ... why this exception is coming ..? plz help.....

Hi
please try recreating the EJB , just check whether the home and remote interfaces and the business methods in the home and bean classes are defined properly .Also check whether the ejb editor is showing all the business methods
hope this helps ,please do ot forget to reward points
regards
rajeshkr

Problem in creating a JDBC System on VC7.1 portal ( CE7.1 SP3)

I have a problem in creating a JDBC System on VC7.1 portal (CE7.1 SP3)
I get the following error:
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Could you please let me know if there are any guides on SAP Library; I was not able to find any documentation nor any threads discussing this on VC7.1
Although, I saw this thread Can Visual Composer talk to/connect to any Database?..
which says that VC7.1 can connect to SAP backend
and web services only, and there is no direct connection to the db.
Help needed please.

Hi Dharmi
Here is a quote of Dafna's post in [another thread in this forum|Re: Copy VC controls]
CE7.1.1 will be released at September 2008 for ramp-up customers.
There are many improvements and new capabilities in the new release of Visual Composer for CE7.1.1. Among the new features you can find:
The missing features from Visual Composer 7.0 (Html view, portal Eventing support (EPCM), JDBC, Undo/Redo, and more..)
Many layout & modeling improvements
Additional ALV table functionality - export to Excel, switch to chart, configure ALV behavior at design time
Integration of Visual Composer in Eclipse - additional entry point to the Visual Composer models from the NWDS. This integration provides the option to add a WD component (in case of missing functionality in Visual Composer), as a black box component to the Visual Composer model. Right-clicking the component will open the Web Dynpro perspective for creating/modifying the component.
Regards,
Shai

Problem in creating a build.xml for weblogic portal application

Team ,
I am facing problem in creating the build.xml using weblogic.BuildXMLGEN tool .
a) Below is the structure of my portal application
SrcCode
--- .metadata (eclipse plugins folder)
--- B2BApp ( Ear Content)
--- b2bPortal ( portal related file(controllers,jsp)
--- b2bsrc (java src)
b) Now I executed below utility to generate the build.xml "
java weblogic.BuildXMLGen -projectName B2BApp -username weblogic -file build.xml -password welcome1 F:\srcCode"
c) Based on the above step , build.xml got generated .
d) when I execute "ant compile" target from the command prompt , I see the below exception
ant compile
Buildfile: build.xml
compile:
+[wlcompile] [JAM] Warning: failed to resolve class AbstractJspBacking+
+[wlcompile] [JAM] Error: unexpected exception thrown:+
+[wlcompile] com.bea.util.jam.internal.javadoc.JavadocParsingException: Parsing failure in F:\b2bNew\b2bPortal\src\portlets\b2b\dmr\Picker\PickerController.java at line 58.+
e) I suspect , the problem is bcoz of classpath issues , as I generated build.xml donot have the references to dependent lib's.As build.xml looks like below :
+<target name="compile" description="Only compiles B2BApp application, no appc">+
+<wlcompile srcdir="${src.dir}" destdir="${dest.dir}">+
++
++
++
+.....+
+....+
Please help me to reslove these issues .
PS: I able to deploy the application using 10.3.2 weblogic workshop ( i.e inbuilt eclipse )

i JaySen ,
thanks for your response. As mentioned we added all the necessary library within the -librarydir but still we see the same error :
+[JAM] Error: unexpected exception thrown:+
com.bea.util.jam.internal.javadoc.JavadocParsingException: Parsing failure in F:\b2bNew\b2bPortal\src\portlets\typeAhead\TypeAheadController.java at line 70. Most likely, an annotation is declared whose type has not been imported.
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.getAnnotationTypeFor(JavadocTigerDelegateImpl_150.java:410)
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.extractAnnotations(JavadocTigerDelegateImpl_150.java:176)
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.extractAnnotations(JavadocTigerDelegateImpl_150.java:152)
at com.bea.util.jam.internal.javadoc.JavadocClassBuilder.addAnnotations(JavadocClassBuilder.java:404)
at com.bea.util.jam.internal.javadoc.JavadocClassBuilder.populate(JavadocClassBuilder.java:359)
===================
a) this is a upgrade project [ upgrading from wlp 8.1.4 to 10.3.2 ]
i.e we are using weblogic portal 10.3.2 version.
b) Searched some sites/forums regarding the above error, and it says something related to "jwsc" ant task [ i.e while compiling a webservice(JWS) ], but we see this error while compiling a normal controller(jpf) class :(
c) we are using "ant compile" target which internally calls wlcompile task , while executing wlcompile this error is thrown .
Help Appreciated
Thx,
Sarat

Problem in creating table maintenance generator for 61 fields in table

Hi Experts,
I am facing problem in creating a table maintenance genarator for a ZTABLE which has 61 fields
i am using below details whicle creating the TMG
in Maintenance screen
i am giving maintenance type as two step
Maint screen no overview screen 2
 single screen 3
Dialog Data Transport details
Recording routine standard recording routine
but it is giving following error
screen SAPL<ZTABLE NAME> 0003 could not be generated
In DYNPFIELD_ATTR mandatory field LINE has no value
please let me know how to sort out these errors.
Is there any limit on the number of fields for which we can create table maintenance generetor.
Thanks a lot in advance
Sudipto

Hi Sudipto,
There is not limit to the number of fields of the Table which can be used in TMG for generation. But, from the usability point of view this will horrible.
I created a Z table and added 64 fields and was able to generate the TMG with the screens perfectly. So, I guess there should not be any problem.
Well, have a look at the Function Group. I guess the screen numbers are already used by some other screens. You can set the system to propose freely available screen numbers from the pool.
Also, check whether proper authorization is assigned or not.
And if nothing is working, you can degenerate all the generated screens and then can have a new regeneration of it.
Hope these tips will work.
Thanks,
Samantak

Problem in Creating Check boxes as a column in a table using MVC

I am trying to display a table format using the Model view controlers, with 1st column as a checkbox. if the user chooses some check boxes and submit the screen then i need to update the information in a custome table.
I am having a problem in creating the check boxes, also pls tell me how to catch the line items checked by the user in the table...
Sri

HI Srinivas
 I am not getting what the exact problem is.....
I am giving you a work around.....to me it does not seems to be an Ideal Solution..But Probably it will solve your problem....
Changes To be Made in Page Layout...
In Pagelayout
<htmlb:tableView id = "tvX" width = "100%" visibleRowCount = "8" fillUpEmptyRows = "X" selectedRowIndexTable = "<%= selectedRowIndexTable %>"
selectedrowindex = "<%= selectedrowindex %>"
onrowselection = "select"
selectionMode = "MULTISELECT" table = "<%= sflight %>" />
selectedindexrow is an attribute of type INT4
In Do handle event.....instead of using the previous code use this one...
if event->id = 'SUBMIT'.
DATA: WA TYPE INT4.
LOOP AT SELECTEDROWINDEXTABLE INTO WA.
*Here you can read your table of TABLEVIEW with index *equal to WA into a workarea and then use that workarea *to update the customer table ENDLOOP.
elseif event->id = 'tvX'.
tv ?= CL_HTMLB_MANAGER=>GET_DATA( request = request name = 'tableView' id = 'tvX' ).
IF tv IS NOT INITIAL.
table_event = tv->data.
selectedRowIndex = table_event->SELECTEDROWINDEX.
append selectedrowindex into SELECTEDROWINDEXTABLE.
endif.
ENDIF.
Meanwhile..Let me check why that code does not work.....
Hope it solve your problem....
Cheers:)
Mithlesh

I have a problem in creating a Process Chain(PC).

Hi GURU's
I have a problem in creating a Process Chain(PC). The PC should run on first 3 business days of the month for six times i,e 6am, 7am,8am, 9am,10am,11am.
For this i have created 3 PC like BD1, BD2, BD3, and i selected the Factory calender provided workday 1, 2 , 3 and time for three chains.
Now should i schedule it for 6times in a day.
I tried creating a new job for one of PC's but i have to change the timings for every month (this is not the proper solution).
Please help me.
Regds
Lajwanth

Hi Friend,
For the days part, you can create a new factory calendar with first 3 business days of each month only as working days.
Then in the scheduling -> Restrictions; you can mention that Factory Calendar id and select radio button for "Move job to next working day". Schedule the chain as Periodic "Hourly".
Then for the Time part -> You can insert process type "Decision between multiple alternatives" after the start variant.
After you insert this process type you can create a formula in it to check for system time. In the if condition check for system time i.e., whether it is between 6 - 11. If only the system time is between 6 AM to 11 AM only then the decision step would turn to green and go to the successor step in the process chain.
Process chain would be like:
Start variant -> Decision Step -> Rest of the chain.
So in short the factory calendar will take care of which days the chain will run and decision step will take care of the timings.
Regards
Hemant Khemani

Problem of creating workbook with permanent template?

Hi all,
Iam facing some problem while creating the workbook with permanent template.Let me expalin in detail.
I have created 3 queries (ex:Stock) and i have to insert these in one workbook with permanent template.I had selected the the permanent template option in settings also.iam able to insert the 3 queris and iam not getting the permanent tempalate.which is mandatory.
I tried saving the existing workbook with same tempalate and removed the query and tried to insert the queries but iam getting abbort system error in program
Pls help me out of this issue.
Thanks and regards,
Rajeev

Hi Joe,
We've seen this error when using express VI's inside of template VI's which are loaded using VI server. Are you doing that? If yes, then take all the express VIs that are inside the template VI and turn them into static subVIs.
I don't know if it will help in your case, but let's try it.
Regards,
Luca
Regards,
Luca

Error while creating infotype message no. pg293

Hi guys,
I am creating a new infotype after creating the PS structure when i click on generate objects i get an error saying "An internal error has occurred" message no. PG293.
kindly provide a solution.
points will be rewarded.
thanks

INFOTYPE CREATION WILL BE TAKEN CARE OF THE ABAPER AS RAO SAID
AS THE OUT PUT WILL HAVE TO SEEN IN ALL THE SERVERS THIS IS A LITTLE BIT TECHNICAL WORK
Start transaction PM01, Create Infotype, by entering the transaction code.
You access the Create Infotype screen:
2. In the Infotype no. field, enter the four-digit number of the infotype you want to create.
When you specify the infotype number, please remember to enter any leading zeros.
3. Choose IT characteristics.
This accesses the Display View Infotypes: Overview screen.
4. Choose Table view   Display   Change.
This accesses the Change View Infotypes: Overview screen.
5. Create a new entry for your infotype.
You can create new entries by
choosing Edit   New entries or
copying an infotype entry with similar characteristics.
If you want to copy an existing entry, select the entry you want to copy and choose
Edit   Copy as.
6. Check the entries in the individual fields.
Result: You have maintained the characteristics of your infotype.
Please check the above config for maintaining your infotype in PA30 and also check your entries in T582A & S.
Edited by: Sikindar on Mar 9, 2008 8:23 PM

PPCI - Problem in Creating Infotype

Similar Messages

Maybe you are looking for