PPDS OVERVIEW AND PROCESS
Hi ppds gurus,
Can any one let me know the ppds overview and process cycle.
step by step..........requird urgency.....
Thanks in advance..
Best Regards,
Prasad
For quick reference to get an overview please follow the link below
http://help.sap.com/saphelp_scm50/helpdata/en/c1/147a375f0dbc7fe10000009b38f8cf/frameset.htm
Also please look at the Wikipedia in this SDN website
Similar Messages
-
Ask the Expert: Overview of Cisco Prime Service Catalog and Process Orchestrator Solutions
Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Cisco Prime Service Catalog and Process Orchestrator solutions.
Cisco expert Jason Davis will discuss Cisco’s network management products offered under the Cisco Prime framework. If you have questions about Cisco Prime infrastructure or data center automation with our Cisco Prime Service Catalog and Process Orchestrator solutions, join us on the Cisco Support Community.
Jason Davis is a distinguished services engineer in the Intelligent Infrastructure Practice team of Cisco Advanced Services. His role is to provide strategic and tactical consulting for hundreds of Advanced Services customers, lead service innovation, and assess new services and technologies. Jason's primary expertise areas are in network management systems, intelligent automation, virtualization, data center operations, software-defined networking, and network programmability.
Based out of the Research Triangle Park (RTP) campus, Jason is also responsible for administering the Research Triangle Park Network Management Lab, Cisco's largest network management lab.
Since joining Cisco in 1998, Jason has been a frequent speaker at Cisco's Networkers and CiscoLive conferences in the United States and Europe. In the past five years he has also been involved in the conference network setup and monitoring. He is a much sought-after resource by the field sales teams to assist with presales solutions and executive briefings. He has provided strategic and tactical network management consulting for several hundred customers.
Jason is a subject matter expert with the following products and features:
Cisco Prime LAN management solution
Cisco Prime infrastructure
CiscoSecure ACS
Cisco Prime Network Registrar
Cisco Process Orchestrator
Cisco Prime Service Catalog
Cisco IP SLA
Embedded Event Manager
SNMPv3
onePK and OpenFlow
Cisco UCS
Device instrumentation
VMware ESX, ESXi, and vCenter
ITIL
Jason received his bachelor of science degree in electrical engineering from the University of Miami (FL). He has been married for 20 years and has 4 children. His interests include providing audiovisual technical support for churches and conference venues, camping and biking with his family, remote-control helicopter piloting, paintball, and recreational shooting.
Remember to use the rating system to let Jason know if you have received an adequate response.
Because of the volume expected during this event, Jason might not be able to answer every question. Remember that you can continue the conversation in Data Center > Intelligent Automation under the subcommunity Cisco Prime Service Catalog shortly after the event. This event lasts through September 12, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.Hello Jason,
Thank you very much for welcoming me to your expert discussion :) I feel to be in the right place, at the right time. Thank you also for answering question beyond your scope here, much appreciated. The information received will help me to go further as such I have submitted a 5 start rating for your first reply.
That sounds promising about the LMS part so yes, I stay tuned and wait patiently.
Ok, now let’s revert to the actual topic discussed here. Cisco Prime Service Catalog and Process Orchestrator solutions I have briefly read up on this on CCO (where elseJ) and picked out the following quote
---- Quote from the Cisco Prime Service Catalog Data Sheet
Today’s end users want self-service and easy access to IT tools and services.
Simultaneously, organizations are seeking ways to extend their cloud management
platforms beyond self-service delivery of virtual machines and infrastructure resources
while increasing their use of cloud-based solutions to enhance business agility and effectiveness.
Cisco Prime™ Service Catalog offers tremendous benefits to organizations that want to unify the ways in
which all types of IT services are ordered and fulfilled, not just infrastructure requests
---- un quote ---
I try to understand what (at high level of course) happens in the back ground when an order is raised and which vendor solution your product can interact with.
As mentioned in the quoted text, this service catalogue goes beyond the standard infrastructure.
Let’s say, a user wants to deploy a new email services, or in your example, extends or create a new web-portal (i.e. for HR to view and manage holiday, staff absence and benefits).
Your solution will need to interact somehow with the 3rd party vendor application that is capable building such portal I believe.
Without disclosing to many information, I assume the portal is linked to backend VM,s that spin up requested resources (and more magic of course). Perhaps I am mixing this up with another cisco product where a user can go on the portal and spin up virtual Firewalls, virtual Routers can be provisioned in now time.
Out if interest; Is this product also known as Mozart? (project code within Cisco?)
I hope query is ok.
Best wishes
Markus -
Merge several PR line into into 1 PO line item with ME57-Assign and process
Our process is run MRP to generate Purchase requisition, system generate 1 PR number for each materials. Happening that there are multiple PR for a same material number and same delivery date. When we convert PR to PO using tcode Me57 - Assign and Process PR, system always generate different line item for each PR even the materials and the requirement date is the same.
How to merge 2 or a few PR line items for a same material and same requirement date into 1 purchase order line item?Hi,
You should use the "shopping cart'' in the "Delivery Schedule" Tab page of the PO to achieve your requirement. Basically, in this case, you should use ME21N transaction with ''Document Overview" feature to select related PR line items and drag them into this shopping cart.
Cheers,
HT -
Ways of creating contract and process flow of contracts
hi friends
ways of creating contract and process flow of contracts
thanks for ur help
regards
krishnahi,
In the MM Purchasing component, a contract is a type of outline purchase agreement against which release orders (releases) can be issued for agreed materials or services as and when required during a certain overall time-frame.
Contracts can take the following forms:
Quantity contracts
Use this type of contract if the total quantity to be ordered during the validity period of the contract is known in advance. The contract is regarded as fulfilled when release orders totaling a given quantity have been issued.
Value contracts
Use this type of contract if the total value of all release orders issued against the contract is not to exceed a certain predefined value. The contract is regarded as fulfilled when release orders totaling a given value have been issued.
You can also set up corporate buying contracts with your vendors. These are valid for all plants and company codes within a client (see Centrally Agreed Contract).
You can create a contract as follows:
Manually
You enter all data relating to the contract manually.
Using the referencing technique
As reference document (the document you copy from), you can use:
Purchase requisitions
RFQs/quotations
Other contracts
CREATION OF CONTRACT MANUALLY:
Choose Outline agreement --> Contract --> Create(ME31K)
The initial screen appears.
Enter the necessary data. If you make any specifications under the group heading Default data, this data will appear as the default data in each item.
In the Agreement type field, specify whether you are creating a quantity or value contract, for example.
Press ENTER .
The header data screen appears.
Enter the contract validity period. Check the other fields on this screen and make any necessary changes (e.g. the terms of payment) and define the header conditions.
Press ENTER .
The item overview screen appears.
On this screen, enter the information for each item (material number, target quantity, price, receiving plant, or account assignment, etc.) using the same procedure as with purchase orders.
Material without a master record: leave the field for the material number empty and enter the following:
u2013 Short description of the relevant material or service in the Short text field
u2013 Material group to which the material belongs, in the Material group field
u2013 Account assignment category
You can enter u (unknown) or the category of an account assignment.
u2013 The target quantity and the order unit
If you specify an account assignment category other than U (field A), you must enter the relevant account assignment data for the item. To do so, choose Item ® Account assignments (see also Account Assignment).
If necessary, review the details for each item. Select the item(s) to review. Then select Item -> Details.
Enter the desired conditions.
Enter further text for the item if any additional instructions to the vendor or Goods Receiving are necessary. Choose Item -> Texts -> Text overview.
Save the contract.
Hope it helps..
Regards
Priyanka.P
AWARD IF HELPFULL
Edited by: Priyanka Paltanwale on Aug 25, 2008 7:20 AM -
OVERVIEW AND CONFIGURATION OF ANO ENCRYTION
제품 : SQL*NET
작성날짜 : 2000-05-19
OVERVIEW AND CONFIGURATION OF ANO ENCRYTION
인증되지 않은 사용자가 네트워크를 통해 처리되는 데이터를 읽지
못하도록 하기위해서 데이터 암호화 (Encryption) 가 사용될 수 있으며,
이러한 데이터 암호화 기술이 사용되면 네트워크를 통한 데이터가 모두
암호화되어 전달되므로 불법적인 데이터의 해킹을 막을 수 있다.
데이터 암호화 기술은 암호키의 생성에 기반하며 이러한 비밀키는 오로지
데이터의 전송자와 수신자에게만 알려지게 된다. 물론, 이 비밀키는 전송자와
수신자 사이에서 암호와와 암호를 푸는 열쇠가 된다.
이 키들은 네트워크를 통해서 전달되어서는 안되기 때문에 각 머쉰들
사이의 비밀키 전달은 어려운 작업이다. SQL*Net 패킷을 암호화할때 사용되는
ANO (Advanced Networking Option) 는 Diffie-Hellman 의 알고리즘을 사용하며
이 알고리즘은 작업의 오버헤드 없이 세션키를 안전하게 전달한다. 이 세션키는
모든 SQL*Net 접속에 대해 각각 다르게 자동으로 생성되어진다.
키들을 복잡하게할수록 암호를 깨기가 쉽지 않으므로 random 값이 세션키
생성시에 사용되며 이러한 암호와 작업은 client 와 server 가 값들을 생성할때에
사용된다. 이 random 값은 다음의 세가지 값으로부터 생성될 수 있다.
- sqlnet.ora 에 SQLNET.CRYPTO_SEED 패러미터를 사용해서 사용자가
인자값을 지정할 수 있다.
- 시스템의 시간값
- OS 에 의존한 값
새로운 접속이 맺어질때 client 와 server 가 위의 방법에 근거해서 그들만의
random 값을 생성하게된다. 일단 random 값이 생성되면 Diffie-Hellan 알고리즘은
새로운 세션키를 생성하며, 이 키는 네트워크를 통한 전달없이 어떤 세션키가
사용되는지 알게된다. 이때 생성되는 세션키는 그 값이 길면 길수록 이를
깨뜨리기가 어렵기때문에 보다 강력하다고 볼 수 있다.
ANO 는 아래의 두가지 암호 알고리즘을 사용한다.
- RC4 : RSA data security 에서 사용하는 알고리즘으로 사용 머쉰의 CPU 가
현저히 느리지 않는 이상은 사용자가 성능저하를 느낄 수 없는
비교적 빠른 알고리즘이다.
- DES : Data Encryption Standard (DES) 에서 1970 년대 개발된 알고리즘으로
IBM 과 National Security Agency (NSA) 에서 사용된다. DES 는 RC4
알고리즘에 비해 약간의 성능저하를 느낄 수 있다.
RC4 와 DES 는 다른 키값의 길이를 가지며 DES 는 40-bit 또는 56-bit 암호화로
구성되어질 수 있다. RC4 는 40, 56, 또는 128-bit 키들을 가질 수 있다. 그러나,
US 정부는 40-bit 이상되는 키값의 사용을 미국과 캐나다를 제외한 국가에서의
사용을 규제하고 있었으나 Oracle8i 와 더불어 56-bit 암호화도 전세계적으로
현재 사용가능하다. 앞으로는 128-bit 알고리즘도 오라클의 차기 버전에서
채택될 예정이다.
데이터 암호화가 사용되기 위해서는 ANO 가 client 와 server 양쪽에 인스톨은
물론 셋업되어 있어야 하며 반드시 SQL*Net 이 먼저 인스톨되어 있어야 한다.
만약, SQL*Net 을 다시 인스톨했을 경우라면 ANO 를 다시 그 이후에 인스톨해야 한다.
아래에 설명되는 모든 패러미터들은 "SQLNET.ORA" 화일에 지정되어야 한다.
- SQLNET.ENCRYPTION_SERVER
- SQLNET.ENCRYPTION_CLIENT
ACCEPTED - 만약 나머지 쪽에서 요청한다면 암호화를 활성화 한다.
REJECTED - 다른 나머지 쪽에서 요청한다해도 암호화를 활성화하지 않는다.
REQUESTED - 만약 나머지 쪽에서 허락한다면 암호화를 활성화 한다.
REQUIRED - 암호화를 활성화하고 그렇지 않으면 접속을 허용하지 않는다.
- SQLNET.ENCRYPTION_TYPES_SERVER
- SQLNET.ENCRYPTION_TYPES_CLIENT
RC4_40 - RC4 40-bit 암호화 사용
RC4_56 - RC4 56-bit 암호화 사용
(Domestic only, 즉 미국 이외에서는 사용할 수 없다.)
RC4_128 - RC4 128-bit 암호화 사용 (Domestic only)
DES - DES 128-bit 암호화 (Domestic only)
DES40 - DES 40-bit 암호화 사용
그리고, 아래의 테이블은 만약 SQLNET.ENCRYPTION_SERVER 와
SQLNET.ENCRYPTION_CLIENT 가 다른 값으로 셋팅되어져 있을때 접속요청의
결과를 보여준다.
Client
|Accepted Rejected Requested Required
Accpeted |On Off On On
Server Rejected |Off Off Off ora-12660
Requested|On Off On On
Required |On ora-12660 On On
아래는 40-bin 의 RC4 암호화를 사용하는 ANO 를 셋팅하는 server 와 client 의
샘플이다.
#SQLNET.ORA - CLIENT
sqlnet.crypto_seed="dsdfrpdstrpgrmmpbmprthmtpommbmptbmpotpre"
sqlnet.encryption_client = required
sqlnet.encryption_types_client = (RC4_40)
#SQLNET.ORA - SERVER
sqlnet.crypto_seed="fewkpfrepgomrepogmropegjerpogjpejvvmmrpm"
sqlnet.encryption_server = required
sqlnet.encryption_types_server = (RC4_40)Go to SAP Building Block Library by using the link given below
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
Type: Baseline packages
Indutry: All Industries
Country: Your preference
Then Click the document for materials management
You will get a dialog box, there select configuration guide link, this will open up one word document
This give you the configuration guide for SAP MM Module
To get MM Scenarios
http://help.sap.com/bp_bl603/BL_US/html/scope/Scoping_offline.htm?display=STE-BL_US_V1603+ENTRY_LEVEL_FINANCIALS.xml
This is Best Practice for US, this covers standard functionality
MM Scenarios are given in Procure to Pay area
For Example, Qutotation for Procurement, Consumable Procurement etc
docuble click the selection area you willget a small pop-up select details button in pop-up box
Then you will get a new window, in that select Business process Documentation (left hand side) link, this will open up respective scenario document -
Problem with AND process in daily running process chain
Dear Friends,
I am currently I am facing problem with AND process. In my daily running process chain, daily the process chain is failing at AND process. Currently I am workaround and manually repairing the AND process and loading the data with below (link) steps.
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
I need permanent solution for this reoccurring problem. Kindly share your thoughts and ideas to resolve this problem.Hi,
The below are the job log. After this the batch job is failing.
Job log overview for job: BI_PROCESS_AND
Job started
Step 001 started (program RSPROCESS, variant &0000000190315, user ID MAESTRO)
This AND process is not waiting for event RSPROCESS, parameter 475P4YTXTIIOA6IQ9GAZVEP24
Job cancelled after system exception ERROR_MESSAGE -
Get the supply source of planned order and process order.
Hi experts,
I would like to display production version (supply source) on prduct view.
But, I don't know that how to get supply source of planned order and process order.
APO table is complax.
Do you know that?
Regards,
SatoruHello Tushar,
Are components also plan in APO with MRP type X0?
Does PDS or PPM contain all the components?
Verify if the component is maintained properly in the PDS.
Check whether there is an active integration model for the components, also execute the RAPOKZFX report for all the materials in question.
When you convert the PPDS order to process order then conversion happens in ECC/R/3 system. This is the place BOM has to be reexploded in ECC. Please check if you have any enhancement which restrict BOM explosion.
Also check OSS note 1576703 suggested by an expert Caetano.
Best Regards,
R.Brahmankar -
How to develp a subreport in the same page of the main report and processed when is called
SSRS 2012
Hi guys,
I am developing a report that includes a subreport.
therefore The report is made up by 2 sections:
1) Show a grid (several rows - may be 100 or more - and some columns). It represent high level info (Each row represent a specific item)
2) The user click on a Row/column (eg: Item1, to see details that must be shown as graph.
Here the problem: Searching info about SSRS reporting for subreports, drilldown, nested report and so on, no ones accomplish the requirements for the following reasons:
1) Subreports: NOT open in the same page. The user must <go back> to see detail for other items, such as Item 2....
2) Nested and DrillDown: Process data as the Main report (they are hidden and displayed after user action). In my case this leads to performance problem, because: if the main report has 200 objects (it means 200 graphs processed and hidden at the same time
for the main reports).
3) DrillThrough and Subreport: The detail data are processed only when the user select the interested item in the main report. Here the problem: the report is shown externally.
Please, it there any possibility to have a subreport (or anything else) to be executed in the same report as the main report and processed only when the user make action?
Thanks for your help.Hi Fasttrack2,
According to your description, there is a main report with more than 100 rows of summary information, when users click the item of the row, the report need to jump to detail information shows as graph. The problem you are facing is that you are not sure
subreport, drilldown or drillthrough report should be used? You hope to set display detail information in the main report and keep high performance of report.
In Reporting Services, each subreport instance is a separate query execution and a separate report processing task. Subreports are recommended when there are just a few subreport instances. We should not use subreports inside a group when there are many
group instances, instead, consider using drillthrough reports. Drilldown reports process all data even when the data is first hidden. In order to improve the performance of the report, we can split drilldown reports into parameterized drillthrough reports,
because Drillthrough reports do not run until a user clicks the drillthrough link in the main report.
In this case, we can consider using drilldown or drillthrough report. In drilldown report, when we click a plus or minus button to expand or collapse a section of a report, the detail data will be displayed in place. By using drillthrough report, when we
click the link in the main report, the detail data will be displayed, we can come back to the main report by click return button in the drillthrough report.
Reference:
Troubleshooting Reports: Report Performance
Drillthrough, Drilldown, Subreports, and Nested Data Regions
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu
If you have any feedback on our support, please click
here. -
Difference between connection, session and process
Hi all,
Can anyone please update me on the difference between connection,session and process.
Thanks in advance,
- SriI got this useful note by googled in net. It describes session,connection,process gracefully.
A connection is a physical circuit between you and the database.A connection
might be one of many types -- most popular begin DEDICATED server and SHARED
server. Zero, one or more sessions may be established over a given connection
to the database as show above with sqlplus. A process will be used by a session
to execute statements. Sometimes there is a one to one relationship between
CONNECTION->SESSION->PROCESS (eg: a normal dedicated server connection).
Sometimes there is a one to many from connection to sessions (eg: like
autotrace, one connection, two sessions, one process). A process does not have
to be dedicated to a specific connection or session however, for example when
using shared server (MTS), your SESSION will grab a process from a pool of
processes in order to execute a statement. When the call is over, that process
is released back to the pool of processes. -
Can i use labview to capture and process images from ip cameras connected to a switch.
Hi,
i have more then one ip cameras conneted in LAN by a switch. i have a PC conneted to same switch. is it possible to capture images from these ip cameras and process them(for example performing simple barcode scan or QR-code scan or OCR)? Which IP cameras will be supported?There is functionally no difference whether the camera is connected directly to the system or via a switch. Both should work the same. The only real requirement that you'd need to care about is whether the switch can pass multicast UDP traffic correctly (this is used for network discovery of IP cameras). Generally all unmanaged switches (probably what you are using) will treat multicast traffic identical to broadcast traffic, but some managed switches/routers may need to be configured to pass multicast.
Eric -
It sounds CRAZY...but it's true and I proved it out over many tests...
We receive a .xlsx File from an outside vendor. If we simply move the file over to our processing Path and then try to source it and process it in SSIS, we get this error...
Exception from HRESULT: 0xC02020E8
Error at Data Flow Task [Excel Source [1]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB Error has occurred.
Error code: 0x80004005
However, if we open the file and Save It and/or Save As to our processing library path, we can source the .xlsx File and process it accordingly.
Why is this? Is it because something funky is happening under the covers when the the vendor creates and saves the .xlsx File and then when we open and save it on our network it then cleans it up?
Is there anyway that we can get around this? I hate for the processing clerk to have to go through what seems like a meaningless task....but I cannot think of any way around this if we cannot source the original file. And a C# Edit Script using Microsoft.Interpol.Excel
is not possible because we are not allowed to put Microsoft Office on the Server where the SSIS Package will eventually reside.
Any thoughts...suggestions...etc...would be GREATLY appreciated.
Thanks for your review and am very hopeful (Holding my breath) for a reply and possible solution and answer to this strangeness.
ITBobbyP85First of all...THANK YOU ARTHUR!
You're probably sick and tired of seeing my posts out here on this.
We are running Microsoft Office 32-bit which is why I downloaded the 32-bit driver of Microsoft Access Database Engine 2010 from...
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Sooooo I think what you're saying is that it is a Microsoft Office 2010 .xlsx File but utilizing the 32-bit Microsoft Access Database Engine 2010 only allows me to source as Microsoft Excel 2007.
Nowwww....this will run on a Server...soooo a couple of questions...
1.) Are you saying I need to use the 64-bit Microsoft Access Database Engine 2010 in order to process this file without having to open and Save it? Can I do that if we're running Microsoft Office 32-bit? Will I be able to source this on the Server because
we cannot install Microsoft Office 2010 on the Server where this SSIS Package will live and breathe.
2.) How can I tell which Microsoft Access Database 2010 Engine is on the server where this will eventually reside and run? 32-bit or 64-bit?
Welllll...maybe a 3rd question...
3.) Is there anyway to get around this driver dependency? Can I create a script to bulkcopy it and it would simply take what's on the server.
Now mind you...we DO NOT have Microsoft Office installed on our server where this will reside...a licensing issue...
So maybe now this explains my struggles with this damn file(excuse my French and frustration)...and why I was using a C# Edit Script to Open and Save the File until I then deployed it to the server and the Microsoft.Office.Interop.Excel DLL was not available
on the Server because we cannot install Microsoft Office on the Server.
Sooooo it seems as though I'm back at square one.
UGH!
Any additional help you can suggest or even if we can continue this "offline" would be GREATLY GREATLY appreciated.
Thanks! -
'AND' process in a process chain failure - need help
For the first time and out of no where, two separate 'AND' processes in two separate process chains failed on two separate days. It displayed error the same messages in both isntances as below. It seems that when the first load completed and the second was still in progress, this 'AND' attempted excecute and failed.
I had to manually resume the chain by setting the 'AND' status'to 'G' in RSPCPROCESSLOG table. I also plan to recreate those 'AND'.
But did anyone here experience this problem and know the root cause?
Thanks for any assistance!
Julian
This AND process is not waiting for event RSPROCESS, parameter
Job cancelled after system exception ERROR_MESSAGEThanks, Shambhu!
I am planning to create new ones. But my problem is that I hate to recreate all 'AND's I have in all our chains. There are a lot of them. But if I don't, I have no idea which is the next victim ...
Julian -
How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.
If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/ -
Hi,
I have a process chain that has two parallel processes of loading DSO and Infocube data. There are two infopackages on one side and two on the other side. The two processes are connected with and AND process at the end and after that there is a datastore activation process.
When I executed the process chain, the infopackages on both sides started loading data. The two infopackages on the left side finished first while the second infopackage on the right side had not finished yet when the AND process errored. I get the following message:
This AND process is not waiting for event RSPROCESS , parameter
47VKUORHMXQKR2AN73AVAR0C9
After the AND process I have a Datastore generation process and I want it to continue only when all infopackages have been loaded.
Why does the process stop at AND even though all infopackages have not finished yet?
thanks
MichalisThere was no error message in ST22 or SM37. There was very little info to go on. I just deleted the requests and run the process chain again and there's no error. However the process chain does fail at a later step.
Update Datastore Object Data (Further update)
I don't know what that further update is for. It was automatically selected in my Process chain when I selected the infopackage for the DSO.
There's a MESSAGE_TYPE_X error.
Information on where terminated
Termination occurred in the ABAP program "SAPLRSM2" - in "RSSM_MON_WRITE_3".
The main program was "RSBATCH1 ".
In the source code you have the termination point in line 2659
of the (Include) program "LRSM2U16".
The program "SAPLRSM2" was started as a background job.
Job Name....... "BI_PROCESS_ODSPROCESS"
Job Initiator.. "CSPAPADM"
Job Number..... 14103000
Source Code Extract
Line SourceCde
2629 CALL FUNCTION 'RSSM_GET_TIME'
2630 EXPORTING
2631 i_datum_utc = rsreqdone-tdatum
2632 i_uzeit_utc = rsreqdone-tuzeit
2633 IMPORTING
2634 e_timestamps = l_s_status-t_timestamp.
2635 IF rsreqdone-tstatus(3) = icon_green_light(3) OR
2636 rsreqdone-tstatus(3) = icon_red_light(3).
2637 CALL FUNCTION 'RSSM_GET_TIME'
2638 IMPORTING
2639 e_timestamps = l_s_status-ts_proc_ended.
2640 l_not_yellow = 'X'.
2641 ENDIF.
2642 IF l_not_yellow = 'X'.
2643 CALL FUNCTION 'RSSTATMAN_SET_STATUS'
2644 EXPORTING
2645 i_s_status = l_s_status
2646 i_with_commit = 'X'.
2647 IF l_s_status-t_status(3) = icon_green_light(3) AND
2648 l_s_status-dta_type = 'ODSO' AND
2649 t_data-aufrufer <= '70'.
2650 CALL FUNCTION 'RSS2_CALLBACK_ODSADM_ODS_SUCC'
2651 EXPORTING
2652 i_ods = l_s_status-dta(30)
2653 i_rnr = l_s_status-rnr.
2654 ENDIF.
2655 ENDIF.
2656 ENDLOOP.
2657 IF sy-subrc <> 0.
2658 IF t_data-aufrufer <> '09'.
2660 ENDIF.
2661 ELSE.
2662 IF l_not_yellow = 'X'.
2663 CALL FUNCTION 'RSB1_OSNAME_TO_ICNAME'
2664 EXPORTING
2665 i_osource = g_s_minfo-oltpsource
2666 * I_OSTYPE = RSAOT_C_OSTYPE-TRAN
2667 IMPORTING
2668 e_icname = l_icname
2669 EXCEPTIONS
2670 name_error = 1
2671 OTHERS = 2.
2672 IF sy-subrc = 0.
2673 CALL FUNCTION 'RSAWB_MAINTAIN_DTA'
2674 EXPORTING
2675 i_method = rsatr_c_dta_get
2676 * I_TYPE =
2677 i_objvers = rs_c_objvers-active
2678 i_dta = l_icname
Any idea what that means? Also do I need that further update step in my process chain? -
Process Chain hangs on AND process
Help Super gurus!
I've tried several versions of a chain that loads multiple InfoPackages serially then multiple DTP in parallel using filtering from the PSA to a DSO. All load successfully. Then I have the DTPs all meet at an 'AND' process before processing should continue to a cube.
The 'AND' process also shows green but it does not continue to the next process step. It just stops there, no more jobs running, no yellow, nothing. It thinks it's all done, everything after that is still blue.
Why does it hang there and what can I do to get it to continue?
Thanks,
Al
Points available.Hi,
Not sure what is the root cause in your case.
Try this. It may work. Normally this is done after a step turns red and no repeat is available.
Method 1 (when it fails in a step/request)
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
How is it possible to restart a process chain at a failed step/request?
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
Thanks,
JituK
Maybe you are looking for
-
How to view a 'permanent doc' on the iPhone
I have a subway map in .pdf format, zip code map .pdf again, and Word docs that I continually refer to. These docs dont need editing but are purely referential. Current solutions are not working well: a. email them to myself - but then they get lost
-
How to run a search query for a particular folder in KM related to portal
Hi, Can any one tell me the steps for : how to run a search query for a particular folder in knowledge management related to portal. Answers will be rewarded. Thanks in advance. KN Edited by: KN on Mar 18, 2008 6:33 AM
-
Very old 'Sent' mail missing from mailbox - help?
I've got a question about (really) old mail in my Sent mailbox. I went today to look for some very old messages (around 9/2001), and the earliest mail available to me is from Jan 1, 2003. Does Mail archive or delete mail after it passes a certain age
-
Has anyone had issues with the latest i-tunes update 11.1.4 on Windows Vista
I downloaded the update on 24th Jan, and when I tried to open i-tunes after that it failed to start and the message was MSVCR80.dll and the window suggested that I remove and re-install i-tunes. I did this and then my CD/DVD drive was not recognised.
-
Hello in a booking table iwth fields id , room_id , start_date , end_date i want to find how many days eatch month or in a from to date a room is booked group by room. Any ideas ? Regards Aris