PPEM P6 V8.3 integration with BPM 11g

Hi Everyone,
My requirement is to install and integrate oracle Primavera P6 8.3 with oracle Business Process management 11.1.1.6.0 on OEL 5.5.
My Environment:
EPPM Server      : OEL 5.5 32bit
Hostname          :primavera.xxxx.com
Weblogic server URL: http://primavera.xxxx.com:7001/console
BPM Server     : OEL 5.5 32bit
Hostname       : bpm.xxxx.com
Weblogic Server URL: http://bpm.xxxx.com:7001/console
We have installed the BPM 11.1.1.6.0 setup in a weblogic server and the respective weblogic server URL is (http://bpm.xxxx.com:7001/console) and its currently  up & running.
In this web logic server we have created a domain with 2 managed server SOA and BAM. Please find the below details,
bam_server soa_server RUNNING OK 9001
soa_server  soa_server RUNNING OK 8001
While running the "eppmconfig" in P6 environment in-order to configure with BPM process, We copied all the BPM library and connector files to the P6 EPPM server. According to the Oracle Document "connecting_bpm_11g_to_p6.pdf"
In the P6 EPPM Configuration wizard "BPM Configuration" tab its requesting for the below inputs.
bpm.user:          ?               => Please advise whether i have give new user name here for BPM admin, Initially i haven't created any user. (My guess : weblogic)
bpm.password: ?                   (My guess : Welcome123(pwd of weblogic user))
bpm.t3.url:        ?                => Please advise me which url i have to give here ( "http://bpm.xxxx.com:7001/soa-infra" OR "http://bpm.xxxx.com:9001/soa-infra"  OR "http://bpm.xxxx.com:8001/soa-infra" )
                                                    (I am having URL : bpm.xxxx.com:8001/soa-infra)
bpm.security.realm:        => (jazn.com by default)
bpm.soap.url:   ?               => Please advise me which url i have to give here ( "http://bpm.xxxx.com:7001" OR "http://bpm.xxxx.com:9001" OR "http://bpm.xxxx.com:8001" )
bpm.workspace.url: ?     => Please advise me which url i have to give here ( "http://bpm.xxxx.com:7001" OR "http://bpm.xxxx.com:9001" OR "http://bpm.xxxx.com:8001" )
bpm.partition:   ?              => default
Please suggests me which input values, we have to give in the above mentioned variables,
Awaiting for the valuable suggestions.
Regards
Gunasekar

bpm.user and bpm.password could be weblogic and its password. In all the other URL use the port 8001. Save the changes and restart the P6 server and test.
Regards,
Sachin Gupta

Similar Messages

  • VC integration with BPM

    Hi
    How can we integrate VC applications in BPM .
    Thanks
    Monika

    hi
      please check the Visual Composer integration with BPM SAP Document
      https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2011e628-b317-2c10-9fa7-952155e10705?overridelayout=true
    Thanks

  • Oracle Life science Data Hub integrated with OBIEE 11g

    Hi all,
    I have couple of questions from my end,
         1. How Oracle Life Science Data Hub can be  Integrated with OBIEE 11g.
         2. Whether Oracle LSH is a separate software ?  if it so kindly provide the link to download the LSH.
    Many thanks in advance.
    Regards,
    Murali

    Hi Murali,
    I do not know whether obiee can use Oracle LSH as a source or not but please refer below link. It says that
    1) Users can then launch the Oracle Business Intelligence Dashboard
    either through Oracle LSH or through a URL to see data visualizations.
    2)
    Oracle LSH Release 2.2 supports using OBIEE 10.1.3.4.1 for both programs and
    visualizations and OBIEE 11.1.1.5.0 for visualizations only.
    Please check with you administrator.
    Thanks,
    Amol
    (Please mark this answer, if you find correct)

  • AD Integration with UCM 11g - Selecting users from multiple OU

    Hi All,
    I have integrated AD with UCM 11g and able to login with AD username/password to UCM application.
    The one problem I face, the users of this application are scattered in different OUs in AD. Like OUs are created for different locations and users are present in that OU. I'm unable to select all the users of this application from different OU's.
    Like the users are present in below OUs.
    OU=Users,OU=America,DC=compnay,DC=net
    OU=Users,OU=Canada,DC=compnay,DC=net
    In User Base DN - What should i give? When i give any one of the above I get the users properly.
    Also is it possible to select users by querying a security group in AD and getting all the members (Users) of it. Because in our application we have only three roles (mapped to the corresponding three security group in AD), and all users of this application are assigned one of that role. So, I could get all the users by querying the security group. But I do not know if that is possible.
    Please advise.
    Kind Regards,
    Selvam S

    Hi Selvam,
    Just put User Base DN: DC=compnay,DC=net
    This will pull all users from both OU, along with some unwanted entries like computers on the domain. Another, possibly silly proposal, would be to create two Ldap authenticators with different User Base DN. Both should be on the top of authenticators list with Sufficient flags.
    Regards,
    Boris

  • BI Publisher Performance integrated with OBIEE 11g

    Has anyone seen issues around the performance of rendering the BI Publisher frame when it is integrated with an OBIEE dashboard (11g)?
    If I create a simple BI Publisher off a simple data model (Select 1 from dual). I open the BIP report within the BI Publisher environment (XmlpServer) and it opens in seconds.
    When I open this same report within the OBIEE Web Catalog or place it on a dashboard page I have seen it take upwards of 40-50 seconds to render the frame then the report. The time seems to me more around rendering the frame.
    Usually when you initiate your first session you see the longest rendering time, subsequent runs of the report are lower but still higher then the few seconds it takes in the BIP environment.
    Has anyone else seen this issue, we opened a ticket with Oracle and it seems they are leaning toward creating a BUG around this. Just wanted to see what others were experiencing and if they identified the source of the issue. Thanks.

    Hi Dustin,
    The FMW security model in BI Publisher means it is integrated into OBIEE - I believe it's the default. If you're using authenticating and authorising via weblogic then I can't think of a good reason to use BI Server authentication in publisher, you should be using FMW security.
    In answer to your question tThere was no bug raised. The work around for us was using document 1338007.1. In your case that doesn't seem necessary since you're using OVD already.
    Edit - should just add that if your OVD authentication is set up in the repository then you need to shift that to the weblogic server security model and remove any authentication logic from the repository. After that the FMW security model for publisher should work.
    http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm
    Regards,
    Robert
    Edited by: Robert Tooker on Nov 3, 2011 2:07 AM

  • Paypal integration with Oracle 11g??

    I am trying to run the PayPal integration sample application under 11g and running into an issue when it tries to access the sandbox url:
    p_api_url is being passed into the module setting things up and is:
    https://api-3t.sandbox.paypal.com/nvp
    l_http_req := utl_http.begin_request(p_api_url, 'POST');Error I am getting back is :
    ORA-29273: HTTP request failed
    Cause: The UTL_HTTP package failed to execute the HTTP request.
    So trying to do a simple post the Paypal url is failing, why??
    Thank you,
    Tony Miller
    LuvMuffin Software

    There is no integration out-of-box between cache and database, and never will be, because it highly dependent not only on database type, but also on tables structure and complexity of objects and SQL queries you need for retrieving entities you need from database. First step would be to using events, as perfectly described within blog entry mentioned below.
    But it's just a tiny but of the actual work, one has to build an separate set of objects reacting on events and doing the actual data extract and do it reliably, rolling back extract data, reconnecting upon database failures and allow partial updates of the entities in cache in order to pertain high performance in case of huge amounts of extract batches.
    There exists a generic architectural approach & solution made specifically to leverage Oracle database features on this regard, having all these features, I've built it for one of our OLTP apps.

  • BAM integration with BPM 11gR1

    Hi,
    I am trying to integrate BPM 11gR1 with BAM starting with a simple scenario as am a newbie with BAM.
    The requirement is to generate a report for tracking a BPM process and whenever a new instance of a BPM process is created, the report should be updated and reflect the change.
    I have carried out the following steps:
    1. Updated the BAM Adapter on the SOA server with the BAM server details (IP,port, credentials)
    2. Cleared the "DisableActions" parameter on the EM console for BPM.
    3. Created two Business Indicators for the BPM process whose tracking is to be done. Both these indicators are "Dimensions" with Type String. Used an Assign activity inside the BPMN process to populate the values from the request payload.
    4. Created a new Data Object in BAM Architect (Inside a new folder created within Samples folder) and added two columns to it corresponding to the business indicators.
    5. In the "Project Properties" of the BPM project, enabled the BAM option and provided the path of Data Object as /Samples/NewFolder. And deployed the project.
    6. Created a new BAM report using Active Studio of view type "Updating List" and selected the data object created.
    Now, the expected outcome is that whenever the BPM process is invoked and it's instance is created, the data should be sent to BAM and the report should be updated with the values of these Business indicators.
    But this is not happening and also am not able to track if the data is at all being sent from BPMN process to BAM.
    Not sure if missing out something.
    Any inputs/thoughts would be really helpful,thanks.

    Hi
    You seem to have done all the actions required :
    BAM adapter configuration
    Disable Actions cleared in EM
    BPM process enable for BAM publishing.
    Here are a few things you can investigate.
    Check the configuration again. Ensure BAM adapter and BPM project preference is pointing to the same JNDI name.
    BAM Adapter configuration sometimes require a restart. Please do so , if not already done.
    Check if any data showed up in Component DO ? If yes, the problem might just be with the BI DO. Try to send 2-3 instances
    Is this PS3 (11.1.1.4.0)? If yes, it will automatically create the BI dataobject for you in Samples folder upon deployment so check under Samples folder if a new DO has been created.
    Remember that you need to deploy the process with BAM enabled and BAM server running to get BI data into BAM.
    Lastly, check the logs - check bamserver.log , bam-diagnostics.log and Soa/bpm log to get more information.
    Regards
    Payal

  • JDevloper and Getting Started with BPM 11g

    I have the latest version of Jdevloper 11.1.1.5, and I am not finding the BPM Application,
    as outlined in the Book Getting Started with Oracle BPM Suite 11gR1? The settings for the 'role" are just not there?
    Must I run Jdevloper 11.1.2.1? which then complains about the maintenance level.
    Can anyone comment on why, this feature would not be in 11.1.1.5 ?
    Edited by: user2738980 on Dec 7, 2011 9:35 PM
    Edited by: user2738980 on Dec 7, 2011 9:40 PM

    I attempted this option early on, an once again the BPM option was not in the update list, I install Spring, the tomcat ext... but there was no BPM ext. you do have a point here, is there a separate update center?
    I'm assuming that it would / should be in the default centers for the tool?
    Edited by: user2738980 on Dec 9, 2011 6:56 PM

  • Forms 11 integration with ADF 11g Example

    Hi,
    i found the nice screencast Screencast, it shows the interaction Forms 11 and ADF 11...
    Now my question:
    Is there some more information / tutorials for building Forms 11-Applications which interacts with ADF-11?
    kind regards
    Martin

    Hi Martin, I probably need to set the expectations in that we will look to put together some samples/demos/howtos on integrating Forms and ADT graphs but thats something for the next 6 months (and you probably need something yesterday).
    In terms of calling ADF from Forms and visa versa, since both are launched from URLs so you can simply call something like web.show_document('ADF URL'). However, I think we really need to look deeper since there are different ways of integrating Forms and Java applications. Maybe what you really want to do is something like
    http://groundside.com/blog/GrantRonald.php?title=oracle_forms_and_google_charts&more=1&c=1&tb=1&pb=1
    I'm also interested in the business motivation - why do you want to migrate Forms to ADF - if its simply so you can leverage features like charting - maybe the above example could help.
    Regards
    Grant

  • Primevera 6:Installation guide and Integration with Oracle BPM 11g

    Hi All,
    I working on BPM 11g. I want to integrate Primevera 6 v8.2 or higher version of Primevera with BPM 11g can any one help me out in this issue.I am unable to understand where to start from what i have to install first.
    I have already working environment on BPM 11g now to integrate Primevera what i have start with.Please help me out to move forward.If one has worked on this who has any screenshots please send me

    If your company has a maintenance contract with Oracle, you should be able to find more information in the Knowledge Base.

  • JSP Integration with Oracle BPM 11g

    Hi,
    Could you let me know, How to Integrate JSP with Oracle BPM 11g.
    Thanks

    Thanks for the information.
    But i was looking at how to integrate JSP with oracle bpm 11g.
    IN Oracle BPM 10gR3, We will integrate jsp in screenflow. In 11g, I am not sure how will we integrate JSP.
    Could you please let me know how to integrate JSP with BPM 11g. Thanks!.

  • BPM 11g install and configuration with Webcenter

    Hi,
    I am new to this BPM so need some help in installation. Where can I download the latest version of BPM 11g and for installating it what steps do I need to follow. Also I need to integrate Webcenter also so for webcenter integration what do I need to install and configure with BPM 11g.
    Do I need to install webcenter full suite for integration with BPM and if so can I install both BPM and webcenter in one home iteself. Where can I find some documentation arround installing BPM and configuring with Webcenter.
    Thanks

    Hi,
    Need some info on the install I have to install both SOA BPM 11g 11.1.1.3 and Webcenter 11.1.1.3 on the same box. I have installed the SOA BPM 11.1.1.3 but wanted to find out what is the best option of installing Webcenter 11.1.1.3 as I need to integrat SOA BPM 11g 11.1.1.3 and Webcenter 11.1.1.3. Here is what I think are the options but don't know which one should I go for or is there any other option but the fact is I need to install both on the same box.
    *1. Should I install Webcenter in a separate HOME in doing so I will end up installing weblogic again and then install webcenter. Will endup having two ORACLE HOMES one for SOA BPM and one for Webcenter.*
    *2. OR should I install Webcenter in the same home as SOA BPM and create a new domain in doing so what happens to some of the components that are installed when installing SOA BPM.*
    *3. OR should I just extend the SOA BPM Domain and have both SOA BPM and Webcenter installed in the same domain. I believe this will only add the webcenter components but don't know if there are any issues.*
    And help is really appreciated..
    Thanks

  • Obiee 11.1.1.5 integration with OAM

    Hi,
    I integrated OBIEE 11.1.1.5 with OID11g (as a part of OAM integration),all OID users are getting reflected into obiee.Im able to login in to the ‘analytics’ but not able to access the reports.Also I'm not able to assign any BI groups to OID users.
    Have anyone faced this kind of a scenario?Can anyone please help me?
    If anyone have done obiee 11.1.1.5 integration with oam 11g,please provide me the document which you followed.
    Thanks in advance,
    Fathima farsatha.
    Edited by: 927873 on Jul 16, 2012 12:11 AM

    Hi,
    Please try to access Analytics Webservices by using 'analytics-ws' instead of only 'analytics' in the URL as below,
    http://<Host Name>:<Port>/analytics-ws/saw.dll?WSDL
    Give a try with below link it may help you..
    http://onlineappsdba.com/index.php/2011/12/05/integrate-obiee-11g-with-oam-11g-for-single-sign-on-in-13-steps/
    http://fusionsecurity.blogspot.com/2012/06/integrating-obiee-11g-into-weblogics.html
    http://docs.oracle.com/cd/E23943_01/bi.1111/e10543/sso.htm#CEGJBAED
    Thanks
    Deva

  • BPM 11g R1 now released

    http://blogs.oracle.com/bpm/2010/04/bpm_suite_11gr1_released.html

    BPM 11g has split into two main components for the Business Analyst and the Developer/IT. There is a Process Administrator UI that makes it easy for BA's to model, change and implement business processes.
    As far as the developer is concerned, there is much more capability in the way it is coupled with Oracle SOA suite. It's only complex because developers must deal with complexity. With BPM 11g you get a SOA suite rules engine and ADF. If you haven't developed using ADF before, hold judgment until you get a chance to learn how it works. Also give JDeveloper a chance. For eclipse users, it shouldn't be to difficult to find everything you need.
    I think the ideal candidate to go to BPM 11g R1 will be someone already entrenched in Oracle Fusion Middleware. It will take some time for ALBPM and old Fuego users time to transition over. I also think people may get frustrated with some quirkiness in R1. You may want to wait for R3. But I think you'll be happy with the capability and power contained in BPM 11g. It's be a bumpy start, but hold on. Things will get better.
    Mark

  • BPM 11g integration with UCM11g using Java Enbedded acitivity

    Hi Friends,
    Can anyone throw some idea how to integration with BPM11g and UCM11g
    We need to have a java code using Java Enbedded acitivity.
    1) How to Connect to UCM 11g using java code any sample Java Embedded Code( we are connecting through RIDC)
    2) How to Fetch the document from UCM using RIDC.
    3) How to Close the Connection.
    Hi friends,
    My requirement was Using BPEL JAva Embedded Acitivity need to connect UCM by RIDC. Got SCAC exception. I could solve this today 3/12/2012... refer below link
    Re: SCAC-50012 Got this exception when using BPEL Java Embedded Activity
    But I have the actual thing.. as per my post..
    Now I need to fetch the doc i.e.,
    In UCM we have pdf documents i need to Download that document and show it in ADF UI using Java Embedded Activity.
    Ie., Using Java Code I need to Download and Decode the PDF file using Java Embedded Activity after Connection with UCM. Save as a file in Local Machine then I need to Encode ads PDF and Show it to ADF UI.
    Please experts its Quite Urgent!!
    ThankQ!!
    Regards,
    Pavan
    Edited by: BPM Fresher on Dec 3, 2012 8:12 PM

    Hi experts...
    Any solution for this.. Can any one help me on this...
    Regards,
    Pavan

Maybe you are looking for

  • Free of charge

    Hi, I'm a bit confused about blocking free of charge orders. I know there are free of charge Sales Doc categories and you can block them.  If you create a free of charge sales doc do you still have to put the item category as free of charge for the i

  • Does anybody have a solution for the following?

    A couple days ago I had a white screen on my ipod nano and now I have white lines going up and down the screen. I tried reseting it and it still did not work.

  • Clarification on PO Pricing

    When i see PO Conditions tab, i could see 1. PB00 2. NAVS 3. ZPRS - Std Cost  of Mat. 4. Freight - YFR1 5. Cash Discount - SKTO I understand that for cash discount[SKTO] and freight [YFR1] condition records would have been maintained, so they are app

  • SSL: Best Practice in HA environment

    Hi all, The customer want to know, if there is any best practice Doc available regarding SSL Konfiguration in one WebLogic Server (10.3.6) - HA environment and Hardware Loadbalancer? Additional questions: 1- Configuration of lacation of "certificatio

  • Enhancment pa30 infotype 0021

    Hi EXPERTS, i am doing enhancment in pa30 infotype 0021 (mediclaim) i want to add additional fields as a RADIO BUTTON mediclaim : yes  no With tcode pm01 i have added this radio button. BUT IT IS SHOWING DISABLE.. PLEASE SUGGEST..