Pple Application Suport isrequired to run itunes helper.Please uninstall itunes then installagain. Error 2 Please help
Apple Application Suport was not found.
Apple Application Support is required to run itunesHelper.
Please uninstall itunes then install again.
Error2 Please help i did everything and still have the same problem
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)
Similar Messages
-
When I try to access Itunes Icon on my dell computer I get an Apple application support was not found. Apple application support required to run Itunes, and say uninstall itunes, then install itunes again. It used to work. What do I do?
I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and some people said that they worked.
Here is the original Link:
https://discussions.apple.com/thread/2151777?start=0&tstart=0
OK, this worked for me:( Original Post by r0tt3n4pp13)
1. Save iTunes install file to your desktop.
2. Disconnect from internet.
3. Disable Firewall/Security software.
4. Run install. Note that it installs Application Support and a bunch of other software this time.
5. Run iTunes.
6. Enable Firewall/Security software.
7. Reconnect to internet.
8. Download Watchmen Director's Cut post haste.
OR!
(Original post by Cr4z33)
1. Download and install WinRAR.
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
4. Done! You can now run iTunes normally. -
when i try to open itunes on windows keeps saying apple application is required to run itunes error 2 windows error 2
You could try downloading and installing 7-Zip (free) and downloading a fresh copy of the iTunes installer, unpack the installer into its components using 7-Zip then try a standalone install of AppleApplicationSupport. It may still fail to install but if so you may get useful error messages as to why not.
tt2 -
Apple application software required to run iTunes?
I'm having some issues here. I tried to open itunes and it says "Apple application software not found. Apple application support is required to run itunes. Please uninstall itunes, then install itunes again."
So I did that. iTunes would open but when I connected my iphone it wouldn't work. Then I got a message that said "itunes.itl cannot be read because it was created on a newer version of iTunes." So i tried to rename the file and that didn't work.
But then I was having some more issues with my computer (the fn buttons weren't working) so i did a system restore to before I uninstalled and reinstalled iTunes. I have looked at the forum and tried a couple different things and none of them have worked. I tried opening itunes.exe with winrar and that didn't work. I have an Asus with a Windows 7 64-bit operating system.
So if you can help me it would be greatly appreciated. You should also know that I am not very good with computers so please make your instructions relatively explicit.I fixed it! You have to uninstall every apple program on your computer though. All of them. Then you have to reinstall iTunes. If you get the iTunes library.itl message use the link below.
This link helped me
http://wiki.answers.com/Q/How_do_I_fix_this_issue._ITunes_Library.itl_cannot_be_ read_because_it_was_created_by_a_newer_version_of_iTunes
My iTunes folder was named just iTunes library so I renamed that to iTunes.old then updated it and it worked! -
I am a Windows 7 user and everything has been fine, but when I just tried to open itunes I got an Error 2 message. "Apple application support not found. uninstall and install itunes again." I have done that twice with the same result. this was the 64 bit version.
Check this Apple document out -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Try following the steps in that article, which will have you remove iTunes and the other bundled Apple software. Then download and install iTunes 10.4.1 for Windows (64 bit). -
when i download iTunes during downloading process on messege shown:
An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.4053”.type=”win32”.publicKeyToken=”1fc8b9a1e18e3b”.proce ssorArchitecture=”x86”’.Please refer to helpSuppport for more information. HRESULT:0x8007054F
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes. i don't have mcafee security. i have zonealarm security.
please guide me for download itunes in my pc.Did you read threads "more like this" on the right side?
Yes there are issues and tips on resolving install errors. -
I get only an error message: " XULRunner-
Error: Platform version 1.9.2.13 is not compatible with minVersion >=1.9.2.14
maxVersion<=1.9.2.14 "
My system: Windows XP
I've tried the tips on the Firefox help pages.I withdraw my 'I have this problem too'. My error was different, but a restart fixed whatever it was.
-
I am trying to run iTunes. When I do I get this message "Apple Application Support was not found. Apple Application Support required to run iTunes. Please uninstall iTunes and install iTunes again. Error 2 (Wiindows error 2)" . However, in Control Panel, there isn't an option to remove or unistall iTunes, only an option to repair.
Now, when I dowloaded iTunes, i saved it to my flash drive so that i can have it with me whereever I go. I am not sure if the problem stems from there. I also did this so as not to save it on my work computer but still be able to run it from my flash drive.
Please HELP. I miss my music and podcast.This solved my question by b noir on Aug 26, 2011 7:23 PM
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I am trying to install itunes (64 bit) after downloading Windows 8.1 on my HP Laptop. I keep getting an error message Windows Error 2--"Apple App;ication Support is required to run itunes helper" Does anyone have any simple suggestions for a user with limited knowledge of Computers?
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I have instlled and uninstalled iTunes on multiple occasions but iTunes fails to start with message "Apple Application support is required to run iTunes .......... Error 2 (Windows error 2)". Most most frustrating. Can anyone help, pleeeeeeease!!
iTunes "Apple Application Support is required... Error 2" and possible fix.
Hi Redgilly (and others).
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
I hope this helps. -
Cannot install ITunes--Mesage is "Apple Application Support was not found. Apple application Support is required to run ITunes Helper. Please uninstall ITunes, then install ITunes again. Error 2 (Windows Error 2)
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
When I try to run iTunes I receive the following error message: "Apple Application Support was not found. Apple Application Support is required to run iTunes helper. Please unistall iTunes, then install iTunes again". I have done this twice and continue to get the error message. What now?
Hi texasslagle,
It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
There is an article that you may want to use to try to complete your install here -
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Thanks for using Apple Support Communities.
Best,
Brett L -
I have a windows 7 premium laptop, 64 bit driver, have tried to install itunes but recieve an error when trying to open. Error states "Apple Application Support is required to run itunes. uninstall and reinstall again, error 2 (windows error 2). have tried this 4-5 times with no success. help!
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2 -
I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Apple application support is required to run itunes helper
unable to run itunes 64bit version, getting error message apple application support is required to run itunes helper
reinstalled 2 times but same problemLet's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)
Maybe you are looking for
-
Can I air play the masters from my iMac to the TV?
I would like to see if it is possible to watch the masters live computer feeds through my ATV?
-
Tick color property for XY graph
I wish to change the tick color of XY graph programmatically. Then my program written as below. My bar graph contains 4 y scales. So i think the for loop should not be a problem. However, i get the error which stated ' Specified property not found'.
-
BOM explosion not done because there is no free item number anymore
Hello, I have a problem with BOM explosion when creating a sales order. All the following actions are done with VA01 : - I enter a material (main item 10) with a rejection reason, so the BOM explosion is not done :OK. - Then I add the same material
-
Need help replacing a file in AE
Ok, here is my problem, I made a project on another computer and then I transfered to my computer. I dragged all of the images and sounds but ONE very important image. I downloaded that same image from online and I need help replacing the corrupted o
-
Hello, I read the technical specs of FCP 7, but I cannot find if it is 32-bit or 64-bit software. I also heard that FCP 6 only uses max. 2 GB RAM. Is that also valid for FCP 7 ? Thanks, Hubert