PPM run with different productivities for annual plan

Hi Experts
I want to do the annual planning with monthly bucket, The productivity(same product) from month to month is changing in the ppm across the year.
For maintaining the different productivity for different months i have to create the different PPM.
I want to do only one SNP run for one year
please suggest is there any another method for doing it.

Hi,
You need to think in different way :
as your  prductivity increase that means your rate of production is increase .
so you need to convert your output component and resource utilisation  in terms of rate .
than use a quantity/rate definition to define the quantity capacity or
  rate in the time intervals for the capacity variants.
  To do this, you enter time intervals in a capacity variant and assign
  each time interval a quantity/rate definition.
Hope it will help you .
Manish

Similar Messages

  • Must I define abstract  interfaces with different names for BPM?

    Must I define abstract interfaces with different names for BPM?
    When interface appeared several times with different values and usage.
    Of course they are the same message type.

    Hi,
    Check this
    RFC Scenario using BPM --Starter Kit
    Regards
    Seshagiri

  • Invoice posting with different currency for the same PO

    Hi,
    Can we post the the Invoice with different currencies for the same PO.
    For example.
    PO has Qty 100 pcs.  amount 100 USD
    GR   Qty 100 pcs.
    Is it possible to post Invoice of 50 pc with 50 USD, and 50pcs with some other currency.
    Any sugggestions pls.
    Thanks,
    Satya

    Hello
    As per my knowledge, that is not possible.
    And in whjat scenario, we need to do that?
    In MIRO header itself we have the vendor currency, so it is not posbile to maintain different currency in different line items in MIRO.
    If you want, you can do MIRO in different currency that what is in PO.
    In the example given, you have o post 2 invoices, one for 50 qty in USD and the other 50 in different currency in other invoice transaction by giving the currency in basic data-invoice header and then only press ENTER after giving the PO number.
    Hope this helps
    Regards

  • Are iPads built with different configurations for different countries?

    Are iPads built with different configurations for different countries?

    deebeeque wrote:
    I live in the U.S. but am moving to Brazil. I would like to purchase an iPad here in the U.S. but want to have it set up for Brazil, ie: language, operation, WiFi. Can all of this be done by selecting the country specific configuration at the setup stage?
    You can certainly chose the language when you set it up. WiFi is an international standard, no difference between US and Brazil. You can further go into Settings - General - International and select language, as well as keyboards and region format.
    Also, Is it possible to order the iPad (to be shipped to me in the U.S.) with packaging material (ie: operation manual, etc.) in the Brazilian Portuguese language?
    There is no operation manual included - English, Portuguese, or any other language. You can find the one you need at http://support.apple.com/pt_BR/manuals/.
    Additionally, does Brazil have 4G?
    I'm not sure, but as of now the only countries where the iPad 4G will work are the US and Canada - other countries that have 4G use different frequencies.

  • More contracts (with different suppliers) for one item

    Dear MDM Experts,
    is it possible to make more contracts (with different suppliers) for one item?
    Thanks and regards,
    Ádá

    Hi,
    Thanks for your answer. If I set my shopping cart for a contract with a supplier A, and I select an item with a supplier B, then after pushing button Transport to SRM on the shopping cart webdynpro UI, I would get the an error message, and the item wouldn't come to the SRM.
    If the item doesn't have any supplier, and I make a contract with it, the supplier of the contract goes to the item, and after that I can't make a contract with an other supplier for this item, because of the uppers.
    The type of field Supplier in table Catalog Items is Lookup field, and it can't be modified.
    Could you please write to me which can I set our system to be able to make contracts with many suppliers?
    Thanks and regards,
    Ádám Horváth

  • Hi when i run this in toad for explain plan  its showing an error ORA_22905

    hi when i run this query in toad for explain plan its showing an error ORA_22905 cannot accesss rows from an non nested table item can anyone help me out
    SELECT
    DISTINCT SERVICE_TBL.SERVICE_ID , SERVICE_TBL.CON_TYPE, SERVICE_TBL.S_DESC || '(' || SERVICE_TBL.CON_TYPE || ')' AS SERVICE_DESC ,SERVICE_TBL.CON_STAT
    FROM
    TABLE(:B1 )SERVICE_TBL
    WHERE
    CON_NUM = :B2
    thanks

    Note the name of this forum is SQL Developer *(Not for general SQL/PLSQL questions)* (so for issues with the SQL Developer tool). Please post these questions under the dedicated SQL And PL/SQL forum.
    Regards,
    K.

  • Ip sla operations with different keys for the same destination

      Hi all,
    the customer wants to use different ip sla operations for the same destination (ip sla responder). From the first source router he uses key key1 and from the second source router he uses key key2. The ip sla responder responds only for the first router which uses the key key1.:-( Is it a normal behaviour? Can I use different keys for different ip sla operations for the same ip sla responder?
    See the configuration on the responder:
    key chain test
    key 1
      key-string 7 *key1*
    key 2
      key-string 7 *key2*
    ip sla key-chain test
    ip sla responder
    He tried to use ip sla responders on:
    Ciscu 2911
    Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M3, RELEASE SOFTWARE (fc2)
    Cisco 881
    Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
    Thank you.
    Roman

    Thomas,
    Have a look at:
    http://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-2mt/sec-conn-dmvpn-share-ipsec-w-tun-protect.html#GUID-2B448241-FD10-4F3B-BFF8-DFD44982D235
    If you're using one tunnel source you need to use one ipsec profile, unless you're running (a) p2p tunnel which you're not in this case.
    While you MAY have some luck with sharing/unsharing among different interface I'm afarid it will not be ever mentioned as supported.
    The situation will change with upcomfing 3.10 and 3.11 IOS XE releases (and corresponding IOS releases).
    M.

  • Runas with different user with password also in Batch File

    Hi,
    I need to run one application with different user credentials.
    I am using Runas command in batch.
    When running the task it's prompting for password.
    Here i want to run the application without any promptings.
    Can any body help me is there any batch script for running the program silently without any prompts.
    Thank You,
    Avis 

    Runas is typically not for windows forms but for console operations. 
    Try the forum of your program language.
    However, be aware that probably there will no answer for this given because Runas is mostly meant for malicious programs so code for that is not allowed to distribute using forums.
    Success
    Cor

  • Can i set up my drive as encrypted with different partitions for different versions of osx?

    i have some questions about setting up an encrypted drive with different versions of osx installed on separate partitions, and how this choice effects time-machine and the emergency recovery disk.
    I have a new/refurbished macbook pro with a SSD.  it already has mavericks installed.  i want to fully wipe the drive and reinstall everything my self because I'm odd like that.
    first wiping the current drive
    Does the recovery partition get wiped if i use disk-utility to reformat the drive. Even thought the recovery partition does not show up as a partition, when i look at it with disk-utility? i would like to know I've wiped all partitions so that no little bugger gets left with out me knowing. Disk-utility does not show the recovery partition and this makes me concerned it might not wipe it.
    Does mavericks automatically make a recovery partition during the installation process? Or do i need to make a new 1gb partition for the recovery disk?
    Can i have two different partitions on my drive with separate installations of OSX on it? (one for work that i don't update the system os till my current project is done, and the other for experimenting with new software.)
    will time machine back up both of the partitions or just one?
    can i accomplish all this from a bootable usb drive or do i need to do this in target disk mode? 
    do i need to use a more capable utility than the stock apple "disk-utility"?
    when reformatting the drive should i format it as encrypted or let file vault do this after i install mavericks?
    how much does encryption slow down performance for things like photo/video/music production?

    Do a backup before you do anything.
    Does the recovery partition get wiped if i use disk-utility to reformat the drive
    It shouldn't
    Does mavericks automatically make a recovery partition during the installation process?
    Yes.
    Can i have two different partitions on my drive with separate installations of OSX on it?
    Yes.
    will time machine back up both of the partitions or just one?
    It will as long as one partition is not excluded in the Time Machine/Options.
    do i need to use a more capable utility than the stock apple "disk-utility"?
    No, just boot into the Recovery Volume (command  - R on a restart).
    file vault do this after i install mavericks?
    I would let File Vault do that.

  • Multiple iPods with different libraries for each?

    Hi all, how do I set up iTunes so that I can sync up different iTunes libraries with different iPods? I have two iPods with different music on each and want to keep the libraries separate. (One is from an older computer.) The only option I see when plugging in the older iPod is "do you want to rease this iPod and sync with this iTunes library?" Yikes, no.
    I'm using iTunes 9.
    thanks,
    Scott

    It seems that you would just create your two separate libraries for the two iPods, library A for iPod A and B for B. Then, either don't connect iPod A to the computer when you have library B open or vice versa, but if you do, just select not to sync when the prompt appears.
    Alternatively, elect to manually manage the iPods.

  • Setting mail with Cox (or other services with different servers for pop and smtp)

    My Cox mail account uses different servers for pop and smtp (my personal ISP 1&1 does too).
    The mail applet on my Blackberry Curve 8330 with Verizon does not allow to define different servers for pop and smtp, and further, for SSL smtp mail, the port is fixed at 995 and cannot be changed, while Cox (and 1&1) want to use 587 or something like that.
    As a result, I can only receive mail with these services.
    I also have yahoo mail, which works fine, so I can send mail with it and it is not a life-and-death situation, but I would like to be able to just reply to email sent to my Cox address.
    I called Verizon and they said BlackBerry provides the mail access through their servers and the applet, so there is nothing they can do.
    Is there a way to set it such that I can not only receive but also send mail through either of these services?
    Thanks in advance,
    Didier
    PS: Other than that, the Curve on Verizon rocks!!! so much better down here than AT&T it's not even funny.

    OK, thank you for the input.
    The problem I have with this solution is like the one I have now using yahoo.
    There are 2 problems:
    1) mailing lists want the mail to come from the account that is subscribed, so if the cox account is subscribed, I can't contribute from the blackberry, and if the blackberry account is subscribed, I don't get my mail in Outlook. Neither is good for me.
    2) people who send me mail to the Cox account and get replies from me from the blackberry continue responding to the account that can send from the blackberry (not Cox), and from that point on I do not have that mail on the computer.
    The issue of having two copies is no big deal, I just delete the mail I do not need. I would rather have two than none.
    Really, Blackberry should modify the email service so that they directly support mail systems like those of Cox and 1&1. I am sure there are others. They should also allow the use of another port for SSL than 995. I have not seen anyone using 995 for SSL.
    Until recently, I had a BB provided by my employer, and we had a BES, and that worked really well. I would like to emulate as much of that functionality as possible without having to pay somebody another $10 or $20 a month just for the priviledge of having an account on a private BES server.
    Anyway, thanks for the exchange and suggestions.
    Didier

  • F110 Payment with different currencies for a vendor

    We want to run a payment in transaction F110, where we have different currencies for the same vendor.
    An example: We have a debit invoice on 100 € and a credit memo on 50 SEK.
    When the payment is run, the currencies are not summarized into one record but two separate. One for each currency. We would like to have it in one record. Is this possible?

    Hi
    you can adjust the payment currency for one of them to be in same currency as the another one and you will see at F110 that the program read both document in same currency
    Regards
    Mahmoud EL Nady

  • Is it possible to create a subscription page with different options for blog, newsletter, product announcements, training events, etc?

    I would like to create a subscription page for my Muse site with different subscription choices, but I am not sure if it is possible or, if it is how I should construct it. Any ideas?

    Hi
    This can be done from hosting platform end. If you are using Business Catalyst to host your site , then you can use events module, campaign subscriptions , secure zone subscriptions etc.
    You can create the events/announcements on BC end and then add the module in Muse page which on publish will show the modules on page.
    Thanks,
    Sanjit

  • Several layered effects of the same kind but with different adjustments for the same layer

    Hi,
    I wonder if it there is an easy way to have several different instances of e.g. glow or bevel and emboss on the same layer.
    I know I can achieve this by using smart objects or a duplicate layer with zero blending.
    I just wondered if there is a way to do this directly in the layer effects.

    Hi emil emil,
    thx for your answer!
    I wasn't even refering to different objects on the same layer, btw. it would be enough if I was able to layer e.g. different bevel and emboss on top of each other (With different colors, softness  and size.)  But I guess the answer remains the same.

  • Connect with different server for debugging

    hi to all,
    is it possible to connect to a different server for debugging? this is to share the development environment !!
    please advise.

    Hi,
    Thanks for your question
    You can create SharePoint 2013 project in your Visual studio 2013 without installing SharePoint on your local machine.
    Please follow below steps : Go to the server where SharePoint 2013 is installed and follow steps from 1 to 3
    Go to Run and type "regedit"
    Navigate towards HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
    Right click on 15.0 and click Export. Save the exported file
    Now go to your machine where sharepoint is not installed and follow below steps:
    Now open Registry on your machine
    Import the 15 directory which was exported from SharePoint server
    Open Powershell
    Run this command
    Set-ItemProperty -Path "HKLM:\Software\Microsoft\Shared Tools\web server extensions\15.0\" -Name "Location" -Value "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\"
    Now open visual studio 2013 and you will be able to create SharePoint 2013 project without error.
    I hope this is helpful to you. If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

Maybe you are looking for