PPOME - Adding a new 1001 relationship

All,
We have created a new relationship in OM infotype 1001.  The business would like to maintain this relationship in PPOME.  Anyone know how to add this new relationship into PPOME.  I take it code is involved somehow to get the fields there?
Any help is appreciated.
Thanks.

Hi,
     by using evaluation path you can add the new relation in to the organiztional management,
T .code of evaluation path OOAW and table is T778a,
Rupa Prasad

Similar Messages

  • Adding a new tab in PPOME

    Hi,
    We have a requirement like adding a new tab in the trasaction PPOME.
    Can somebody share their knowledge on this.
    Somu

    All infotypes that are to be added to the transaction, either SAP or Customer MUST have a screen 7000. This makes integration very simple. Another option is to develop a Module Pool with a screen and code to present one or many infotypes, but this is very time consuming compared with simply adding 7000 as a copy of 2000.
    In the case of SAP, standard infotypes that must added without an existing screen 7000 a screen 9000 must be created to take the place of the 7000. Screen 9000 is in the customer name space but must be created in the SAP development class.  for example 9000 screens has to be created for infotypes 1005, 1037 and 1050. Requests has to be made for development of screens for 1005 and 1016, but due to the special nature of the screens it was not possible.
    Entries must be made in T77ID to reflect the additional screen.
    Configuration Steps
    Various steps must be performed to achieve the requirements, which include:
    Removing Tabs
    Adding Tabs
    Adding Search Nodes
    Scenario Scenario OME0 is configured to reflect the requested changes. View T77OMTABUS defines the tabs that are available by scenario per object.
    Removing Tabs
    Maintain View T77OCTABUS
    Add Object and Tab page entries for the correct scenario to remove entries.
    Adding Tabs
    The first step is to define a tab page in view T77OMTABS. In most cases, this should be an Infotype specific entry that uses screen 7000. For solutions that are more complex a Module Pool can be developed.
    Once added, perform the same step defined in Removing a Tab, it will have the reverse effect. Use the Sequence number to determine order.
    Adding a Search Area
    To add an Area to a Search Node you must customize V77CSEAT. In this case, one entry was added for Object type C to allow for a search on Job Group/Family/Series.
    through spro:
    spro-Personnel Management>Organizational Management>Hierarchy Framework>
    Adjust Tab pages in Detail Area--> change the Tab Page Sequence
    also see:
    New tab in PPOME
    new tab in ppome
    hope its useful..:)

  • Adding a new account in Team Foundation Server

    I have a problem with adding of new accounts into Team Foundation Server 2010. I can add a new domain account into group Contributors of my team project without problems but after that I can't see it in the list of available accounts, for example, in the
    drop down list 'Assigned To' at a work item page.
    The added user can see the project, do check-in and check-out but he can't get access to the project work items. He has got an error
    TF201072: A user or group could not be found. Verify that the users and groups used in your work item type definition have been added to Team Foundation Server.
    Can anybody help me?

    Hi Jovanny66,  
    Thanks for your reply.
    We don’t recommend to edit the TFS database(s) directly, it may cause the unknown issues.
    To edit data in TFS Server, we should edit the data through VS, Web Access, TF command or TFS API. Unless there’s an official SQL Server script to edit TFS data which provided by MS.
    As you edited the dbo.Constants table to update user’s data, but the user’s data also included in other 
    TFS tables too, there’s the key connection relationships between these tables, if we update this user’s data in Web Access, TFS Sever will update this user’s data in all the related tables automatically. But you manually edited this user’s data only
    in dbo.Constants table, so the edited data not included in other related tables, it may cause the current issue.
    For the edit TFS database issue, you need contact a Professional Support Service at
    http://support.microsoft.com/select/?target=assistance to gain more support on this case.  
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Adding a New Tab Page in Cprojects 4.0

    Hi
    We have added a new tab page by the method of Global Enhancement to Cproject we are successfull in getting the link in the tab page. But the page we had created thru webdynpro
    is not seen in the tab page it gives a blank page. We are using Cproject 4.0 can u help us.
    regards
    Suresh Nair

    Hi,
    this can be done via  transaction CRMV_SSC.
    Please review SAP help for further information regarding Screen
    Sequence Control under :-
    Screen Sequence Control of the Business Transaction -> Selection of the
    Screen Control Data
    or
    The Screen Sequence Control of the Business Transaction is documented in
    the online documentation under
    - SAP Customer Relationship Management
       - Business Transactions
         - Basic Functions for Business Transactions
           - Screen Sequence Control of the Business Transaction
    Regards, Gerhard

  • Error while adding a new col with check constriant

    Hello
    I tried adding a new column with check constraint but giving the error please correct me..
    drop table testchk
    create table testchk(typenm varchar2(5))
    insert into testchk values('mon')
    alter table testchk add typechk varchar2(5) default 'both' constraint chk_test check(typechk in('m','d') and typechk is not null)For the alter comman getting the ORA-02293 cannot validate error..
    I dont want to create any other constriant like not null etc .. but need only one check constriant
    Thanks

    You cannot assign a default value = 'both' while the constraint allows only 'm' or 'd'.
    This will work:
    ALTER TABLE testchk ADD typechk VARCHAR2(5) DEFAULT 'both'
    CONSTRAINT chk_test CHECK(typechk IN('m','d', 'both') AND typechk IS NOT NULL);Edited by: kordirko on 2010-05-14 18:41

  • Error while adding a new method to the Session Bean

    Hello everyone. I'm using jdev 11g, ejb, jpa & jsf. Everything works fine. But when I try to add a custom method to the Session Bean, I'm having an error.
    Here is my steps:
    1) I added a new method to SessionBean.java. Something like this:
    public void Hello() {
    System.out.println("Hello!");
    2) Then using Structure palette I exposed this method through Local interface and created data control
    3) Finally, I made a command button binded to this method (just droped it from DataControls.dcx to my page)
    When I start the page and click the button, I'm having the following error:
    Error 500--Internal Server Error
    javax.faces.el.EvaluationException: Method not found: Hello.execute(javax.faces.event.ActionEvent)
         at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:58)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1227)
         at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:70)
    ... (I've truncated the log because there is nothing important in the missing part)

    Yes, I have binding in the page def. Everything is correct there:
    <methodAction id="Hello" RequiresUpdateModel="true" Action="invokeMethod"
    MethodName="Hello" IsViewObjectMethod="false"
    DataControl="PriceServiceLocal"
    InstanceName="PriceServiceLocal.dataProvider"/>
    I've droped the method from the Data Controls panel

  • Error while adding a new field to the Segment in we31

    Hi ,
    I am getting error when i am trying to add the new field to the cust. segment.
    It is released for the adding the new fields i am cancelling the release , but i got a message like this
    Error while resetting release of segment 'segment name'.
    it is comming from the message class EA and message number 259.
    Thanks in advance.
    Reagrds,
    bharani

    Hi,
    Have you tried Cancelling the release before adding the version?
    Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
    Please let me know if it worked!
    Vijay

  • We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

  • Adding a New Dimension to a CUBE

    Hello
    Being in new at Oracle OLAP...
    If I need to add a new dimension, SHOULD I RECREATE the cube entirely again??
    Is not there any other way??
    Regards

    Each cell in a cube is referenced by a dimension. Think of it as pointers to cells in a multi-dimensional array.
    So when you add or remove a dimension, what should happen to all those cells.
    In a way you are breaking the cube.
    Since cube data is loaded from a table, you can always re-load your cube after adding or removing a dimension.
    Dimensions are not added/removed frequently, once the design is finalized. You may add a new hierarchy to existing dimensions, which is done more frequently compared to adding a dimension. After adding a new hierarchy, you just have to re-aggregate cube data and not re-load from relational source.
    Cubes are created for reporting, and can be deleted/recreated or truncated - monthly, quarterly or yearly - for various reasons.
    Your source transactional detailed data should be in one (or more) fact tables and should never be deleted.
    Is there any "operational" concern in a Production environment, because of which you are asking this question?
    One trick could be: to create the new cube (with more dimensions or less dimensions than the original cube) and then COPY DATA from original cube into that new cube.
    But it may take the same amount of time as re-loading the new cube from the relational source.

  • Issues with Writing back data to Planning Cube After adding a new characterstic

    Hello,
    We have two cubes and a MP on top of it. ( Reporting Cube and Planning Cube ). An aggregation layer has also been built and so does a planning BEx query on top of it.
    Before Scenario: things were working fine as we were able to write back data to planning cube using the BEx.
    After Scenario: We created a new Dimension in the planning cube and added a new characteristic ( lets call it ZX_KEY ) . This Characteristic holds the concatenated values of some of the other characteristics in its master data tables . ( For ex: Account_Customer ID_Country-code_Industry-code ).
    This new characteristic is also present in the reporting cube and has been added and transferred to MP.
    This new characterstic was added to the planning BEx query as one of the rows and we executed it the analyzer. After entering the required values for all characterstics ( including the newly added ZX_KEY ) and the key figure values, we tried saving it. Now this is where the Analyzer is throwing up this error..
    ~~Characterstic combination cannot be assigned to part provider ~~
    ~~Characterstic 'ZX_KEY'; Characterstic value 'R123000000_12_US_TX'~~
    ~~ Entered values are incorrect:Correct before navigation ~~
    The value that we are entering ( R123000000_12_US_TX ) is picked up from the master data table of ZX_KEY by double clicking and selecting it from the fetched values. So i am not sure as to why its throwing up the above error. Request your help on this please.
    regards,
    Karthik

    Hi,
    Try to check that all characteristics are correctly assigned at multiprovider level.
    hope it helps

  • I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now on my device and no matter how many ways I try its not worked

    I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now showing on my device and no matter how many ways I try its not able to show any more.
    Does anyone know why this is happening and how to rectify the situation as I have tried every help setting for the last 4 hours.

    I have tried everything I have read on the Internet about sync issues and restore etc and not there isn't a single song on my iPad or iPod touch. All of the songs are listed in my iTunes but are all greyed out, some have the cloud symbol next to them but lots don't and some say waiting.
    Long and short is nothing will save to my devices at all.....HELP !!!!!!!?

  • Hi. I have set up the trial versions of Photoshop CC 2014 and Lightroom 5.6 (ie the Photography plan) on a desktop that I have added a new drive to with Windows 7. Everything works fine BUT it is an old computer and I'm thinking that it may pack up unexpe

    Hi. I have set up the trial versions of Photoshop CC 2014 and Lightroom 5.6 (ie the Photography plan) on a desktop that I have added a new drive to with Windows 7. Everything works fine BUT it is an old computer and I'm thinking that it may pack up unexpectedly. These things happen. I want to sign up for the Photography plan but I also have a Windows Vista laptop, and that is old too so I may want to put the apps on a new desktop and a new laptop, having already installed on my desktop. That makes three activations. Am I allowed to do this? Cheers. Paul

    You cannot have three activations. It's simply not technically possible. If and when the time comes, you simply deactivate/ sign out on one of the old systems and install on the new one. If the system goes belly up, you contact support to reset your account. No need to make it more complicated than that and overthink it.
    Mylenium

  • I want to create a new folder on my external hard drive for photos.  Even though I added the new folder button to the tool bar it is not highlighted so I cannot click on it to create a new folder on this drive.

    I have an external hard drive that I would like to pre-make a new folder before I import photos into it.  Even though I added the new folder app to by toolbar, it is not highlighted and I cannot use it.  It will only let me create new folders if I upload to iPhoto.  That is not where I want to store everything.  So I need to figure out how to turn on or activate New Folder on my toolbar for all possible downloading options.

    If it's a drive that you've previously used with a PC, just double-check the format - click the drive once on the desktop to highlight it, and click cmd-i (the command key and the i key together) to see the Info window. That will tell you, under Format, how it's formatted.
    If it's "NTFS", that's the current Windows format. You can read but not write to it with a Mac. If you want full read/write access, you should look into Paragon NTFS, which allows you to do both. Note that some features of te Mac (Time Machine, for example) will only work with Mac-formatted drives.
    Matt

  • Today I deleted a gmail account using my computer.  I also added a new work gmail  address.  Now I want to sync my phone and tablet with the new email address.  I've looked all over and can't find  out how to do it.

    Today I deleted a gmail account using my computer.  I also added a new work gmail  address.  Now I want to sync my phone and tablet with the new email address.  I've looked all over and can't find  out how to do it.
    Peg

        Hi there T&P63385!
    Look no further! I have the answer for you! You can add a new email account to your android device by following these steps: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=31401
    Now I do want to let you know that your phone has a "main" gmail account. If this "main" gmail account was the one you deleted it may be best that you reset your phone and activate it to your new gmail address.
    The reason I recommend doing this is all of your purchased application information is also tied to your gmail.
    Ensure your personal information is backed up (contacts, pictures, etc) and follow these steps to Hard Reset your phone:http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=31308
    Let me know if you have any other questions!
    Thanks,
    MelissaM_VZW
    Follow us on Twitter @vzwsupport

  • I registered my new iPhone 5s to my usual Apple ID, however it isn't showing in my devices when I log in. I tried to register it by adding a new device, but it tells me it's already registered to a different Apple ID. I'm really not sure how to fix this.

    I registered my new iPhone 5s to my usual Apple ID, however it isn't showing in my devices when I log in. I tried to register it by adding a new device, but it tells me it's already registered to a different Apple ID. I'm really not sure how to fix this. I only have the one Apple ID and the phone is brand new, purchased directly from Apple.
    When I check on the phone itself (iCloud and App Store settings) the Apple ID is correct. I'm not sure where else to check.
    Whilst setting up the phone, it prompted me to register, which I did. Then when connecting to my laptop through iTunes it prompted me again so I registered again. I even got a confirmation email to the email address associated with my Apple ID that the registration was successful.
    How can I add my iPhone 5s to the list of devices on the correct Apple ID?
    Thanks in advance for any advice.

    Found the answer to my question after posting (in related discussions)
    https://discussions.apple.com/message/12331666#12331666
    Will call Apple Care as soon as I can.

Maybe you are looking for

  • ITunes won't open from dock or apps

    When I click on the iTunes icon on the dock, it bounces once (sometimes twice), then stops bouncing and nothing opens. I tried opening from the application folder and nothing. I tried downloading the most recent version, but then I can't open the .dm

  • Problems merging files into a single PDF

    Hello, I have a problem whenever I merge multiple files to one PDF. Sometimes the files with smaller images simply lump together onto one page! For example, if I merge three files... an 8 1/2" x 11" and two business cards, I'll get the 8 1/2" x 11" o

  • Gmail acct suddenly not syncing

    I'd been using Gmail via the Mail app as an Exchange account with no problem, as well as gmail's Contacts and Calendars, and suddenly this morning it's not working. I can access Gmail in Safari fine, and do not have 2-step verification enabled. I res

  • ITunes wont work on windows 8

    Just got a new laptop with Windows 8. After installing iTunes I noticed that it wont scan for media. I have tried everything. I unistalled several times, I have ran all the compatibily tests and still nothing. Any ideas?

  • Can't download PDF files with Safari

    When I try to download a PDF using Safari, it will save to my Desktop, but when I go to open it, I get the error "There was an error opening this document. The file is damaged and cannot be repaired." If I try to use the Print command and save it as