PPOME ,pers no,EE group,EE subgroup,pers area not appear in Basic data tab?

Hi Friends,
                    I am new to SAP HR. I am trying to assign a person for a position in tcode PPOME. After that I could not see Pers No,Name,EE group,EE subgroup,Pers area details are  not appear  in Basic data tab. But for other persons which are all exist already in system ,I can see pers no,name,EE group,EE subgroup,pers area details. Could you advice what will be the issue?. Thnak you.
Regards,
Hock Teck..

Hi Rajesh / Thomaselsy,
                                    Thanks for your response. Pls see my below output,
             1.    Plogi Orga value is 'X'.
            2.I create person in PA with pers area ,ee group,ee sub group details and i can see all these details in PA0001 table. I did not create pers area, ee group ,ee subgroup for position ids. I wanted to see those pers area,ee group,ee subgroup detail, from pa0001, in PPOME under basic data tab.
           3.Whether I assign position id to a person in PA40 or assign a person in PPOME to a newly created position id,in both cases I can see details are updated in both PA0001 and HRP1001 tables correctly.
          4.I also tried to assing a position id to a person in PA40 and then through PPOME i tried to assign new position id for that same person. Then I can see new position id got  replaced in PA40 properly.
          But when I double click on person in PPOME, I could not see pers no,name ,ee group,ee subgroup,pers area under basic data tab..Pls let me know how to proceed further..
Regards,
Hock Teck.

Similar Messages

  • Payscale group and levels values are not appearing in IT0008

    Hi Friends,
    I craeted Payscale group & Level in V_T510. Eventhough these values are not coming as F4 (drop down)values in IT0008.
    Pls adivice where I have missed the configuration.
    Thanks

    Hi..
    ESG/CAP and and its grouping in V-t510 have already been maintained. however still it is not coming as drop down values.
    Pls suggest to resolve.
    Thanks

  • IPad Group Contacts are not appearing in itunes

    I have a Group Contacts app on my ipad mini that syncs with the contacts on my iPad.  I created 4 groups.  I want to import those groups into Outlook.  I tried opening up icloud, select all, export.  Only the 1st contact in that particular group is exported.  I then deleted and reinstalled itunes and my groups are not appearing. 

    Have had same problem and read many different posts on the discussion boards. Came to my own sort of hybrid solution that's posted below:
    Backup address book.
    Turn off syncing to iPhone within iTunes, and then hit Apply to make sure it takes.
    Quit Address Book, iTunes, and basically everything.
    Go to Finder > Library > Application Support > Address Book … move all folders out of there EXCEPT the Metadata folder.
    Go to Finder > Library > Application Support > Sync Services … move everything out of there.
    Reboot computer.
    Open address book.
    Open iTunes, connect iPhone, and sync.
    NOTE:  I had to play with these steps, and their order, several times to force iTunes to properly reflect what’s in the address book/contacts, but after about the sixth time it worked.

  • LSO- Course Groups and Course Types are not displayed in Spanish

    We are having issues with the
    data like Course Groups and Course Types not being displayed in
    Spanish on the Learning Iview.
    The Data in the Course Catalog is loaded in Spanish and
    English and I can see the Course Catalog in Spanish when logging on in Spanish in the back end.
    SAP asked us to apply few notes as below
    #1247020 OTR: Texts are not transported
    #448220 OTR: Text is not determined/incorrect text is displayed
    We have applied the above as well and we had no solution.
    However the Problem is NOT related to Texts/Labels as these are displayed in Spanish.
    The Problem is related to the data like Course Groups and Course types not being displayed in Spanish in the front end.
    SAP also came up with the below which did not help either.
    The system will pick the language texts in the sequence
    maintained in the view T778L. If the system does not find text in
    login langauge , the application will search in the sequence
    maintained in the view T778L .Therefore you can change the sequence
    of the languages in the above view as per your requirement.
    Let me know if anyone has a solution to this or has encountered the same problem.

    Is this production or is this in a development system? The dropdown displayed comes from the standard tables. If it's working in development system and not in production, then the chances are higher that the translation didn't go through.

  • Vendor schema group not appearing in purchasing data of Vendor sub range

    Hi Experts,
    I have created a vendor sub range and when maintaining the purchasing data, the vendor schema group field is not visible.
    Is there any specific settings reqd. after maintaining the sub-range.
    Please provide pointers!!!

    HI Sandeep,
    As i said this is not possible in stanadard SAP.
    Even when you try opening VSR specific Purchasing data, there you will NOT get vendor schema group.
    Reason is, Vendor Schema group will be maintained at Main vendor level. So irrespective of VSR, it will pick pricing procedure in the purchasiong Document.
    VSR:  In the vendor master, you can maintain different data for particular vendor sub-ranges, such as ordering addresses or terms of payment, for example.
    When creating a purchase order with a known vendor, different data is only determined if the vendor sub-range is entered in the initial screen.
    Hope this clears.
    Rgds
    Utsav

  • Certain contact groups are not appearing in iTunes

    I am trying to update the contacts on my iPhone, through iTunes, from my iMac.  iTunes is not showing many of the groups that I have in my contacts and when I default to just syncing all of my contacts, it doens't actually synce them all.  How do I fix this?

    Have had same problem and read many different posts on the discussion boards. Came to my own sort of hybrid solution that's posted below:
    Backup address book.
    Turn off syncing to iPhone within iTunes, and then hit Apply to make sure it takes.
    Quit Address Book, iTunes, and basically everything.
    Go to Finder > Library > Application Support > Address Book … move all folders out of there EXCEPT the Metadata folder.
    Go to Finder > Library > Application Support > Sync Services … move everything out of there.
    Reboot computer.
    Open address book.
    Open iTunes, connect iPhone, and sync.
    NOTE:  I had to play with these steps, and their order, several times to force iTunes to properly reflect what’s in the address book/contacts, but after about the sixth time it worked.

  • Properties (group and channel) added are not a numeric data type.

    I am using a dataplugin to add both group and channel custom properties. The properties are both text and numeric, doubles and integers.
    When I create a query in Navigator, I select the custom property using the dropdown, but the operator dropdown only has "=" or "<>". The property displayed in the Data Portal is a float number. I was having this problem when I was adding custom properties using a script. I then tried "Navigatorettings/My DataFinder/Reset/Reset Index", then repopulated my Search Area, using the dataplugin on my raw data files. At this point, all my properties only have the "=" or "<>" operator choices in the query.
    So it appears that my properties are numeric in the Data Portal, but string in the Navigator Query.
    In advance, thanks
    Solved!
    Go to Solution.

    Hi Bill,
    could it be the properties you are talking about are already "optimized" for query?
    In case yes, did you do the optimization by script like
    Dim oMyDataFinderSettings
    Set oMyDataFinderSettings = Navigator.ConnectDataFinder("My DataFinder").GetSettings()
    Call oMyDataFinderSettings.OptimizeCustomProperty(eSearchChannel, "Author_age")
    And did you do this, before DataFinder has indexed some of your files?
    In case yes, DataFinder has to make a guess the datatype of the property without example - so always "string" is chosen.
    (If DataFinder has already indexed some(or better all) files containing the property, DataFinder will "optimze" the property in the datatype which occurs most for this property.)
    In case you know the datatype of the property you are about to "optimze", you can provide this information to DataFinder
    Call oMyDataFinderSettings.OptimizeCustomProperty(eSearchChannel, "myText", DataTypeString)
    Call oMyDataFinderSettings.OptimizeCustomProperty(eSearchChannel, "myInt", DataTypeInt32)
    Call oMyDataFinderSettings.OptimizeCustomProperty(eSearchChannel, "myFloat", DataTypeFloat64)
    Call oMyDataFinderSettings.OptimizeCustomProperty(eSearchChannel, "myDate", DataTypeDate)
    Stefan

  • Add a new field in basic data tab in PPOME for a position

    Hello Evryone,
    I want to display a Job ID field in Basic Data tab when displaying a position. Is this something to do in config? If yes, could anyone please guide me how to do it? Right now I can see only the Job description, but no ID.
    Thank you,
    Rush

    Hi
    Job ID field will not be displayed in Basic Data Tab.  That you can see in the top hald of the portion under <-- Mark.
    The details you can see are
    Task Assignment - Executive
    Code-Exe
    ID C 50000084
    Valid from 30.03.2007
    Valid to Unlimited
    First select the Job "Executive" and press enter, then you can find the details in the first half of the screen.
    Please reward the points without fail.
    Regards
    Venu

  • JPG and RAW files are not grouped together.

    I am finding that my RAW and JPG files are not grouped together.  They show up on the Grid View as JPG for the JPG file and RAW + JPG for the NEF(RAW) file.  This does not seem to be consistent through out the folder.  Some of the pictures are grouped together and others are not.  The ones that are not grouped together have been auto-stacked and then unstacked.  I am not sure if this is what caused the seperation of JPG and RAW files.  I did try to take a picture that I had auto-stacked it  and then remove it and it did not sepearate.  The "Treat JPG files next to raw files as seperate photos" option is turned off, like it is in my Lightroom 3.

    This is what I'm talking about:
    Show subfolders are on:
    In windows Explorer:
    In the Import Dialog:
    Where are the files?
    If I click on the Folder 2014_12_14... all the files from all folders will populate.

  • Authorization Group in CV01n Document Data tab

    Hi SAP Gurus,
    I went on to Configure the Authorization groups at  spro / Document Management / Approval Tab,
    but the same is not appearing in CV01N create document, Basic data tab. Screen......
    can any one explain how to configure this Authorization Group and make use of this Authorization Group
    i tried in PFCG, at object C_DRAW_BGR, also but the authorization groups i have created is not displayed at all.
    what is the Configuration missing and to work with Authorization groups.
    please Advice
    Points Awaiting
    Thanks and Regards
    Kumar

    Dear Punam,
    Thanks for ur reply. i have created the authorization groups in SPRO at the approval Tab,
    and also can see the Field Authorization Group in CV01N basic data Field but
    By pressing F4 or searching i could not find my Auth groups created there,
    Nor i could find them at PFCG, at  C_DRAW_BGR objects, at BEGRU
    where has my created Auth group gone,
    please explain how to work with Auth groups. where and all it has to be assigned and linked.
    How to use Authorization Groups for Digital signatures and restrict users For accessing Documents And Original files specifically.
    Thanks and regards
    Kumar

  • Group text messages not appearing in messages

    I am receiving all one to one text messages on my iPhone and Macbook, but group strings are not appearing on my macbook pro.  Am I missing something?  I've deleted existing threads from phone, power cycled, and still no joy.

    Hi,
    I too have the same annoying issue. I have to continuously take out the battery and restart my Q10 in order for my text messages, facebook, and email notifications to come in. This is my second Q10 now as the first one started freezing when I tried sending emails so I thought the Hub problem was related to a faulty phone but now that I have my second one, the same problems are happening (except for the freezing of the phone). It is incredibly frustrating that a phone in this price range has such a basic fault when the main purpose of a mobile phone is to receive phone calls, text messages, and emails!!
    I have also found that I have multiple contact details for the same person and that if I try to call someone's mobile that begins with 04 (Australian mobiles) I get told I can't call that number, but if I call a mobile with +61 (Australian country code) I get through to them! The phone also wont save contact details of people who only have a landlines number.
    I have been with Blackberry for 6 years now and this is my 4th BB phone. I have always been a staunch advocate of the Blackberry until now. These software issues should not be happening in a high end phone.
    Blackberry, please create a fix for these basic issues as soon as possible.
    I have a Blackberry Q10; OS version 10.1.0.1910; Build 517312; and Software Update 10.1.0.314
    Many thanks

  • Pers Area, Sub area, Emp Group & Emp Subgroup to which user is authorized

    Hi Experts,
    I'm working on an issue right now and it involves fetching the Personel Area, Sub Area, Employee Group, Employee Subgroup to which a user authorization to while hiring an employee.
    Any idea how i can get this information from the Authorization Objects? I tried searching for some tables where the user authorizations are stored but no luck.
    Any inputs on this will be greatly appreciated.
    Thank you.
    Regards,
    Seema Rane

    Hi Seema,
    To see access details at PA, PSA, EG & ESG level,. go to SU01 > give user ID > click on display icon > click on roles tab > you can see all roles which have been assigned to this user(Role cab created via Tcode PFCG) > double click on role > click on roles tab (if it is composite role) or click on authorization (if it is single role) > click on authorization > click on display > Then expand by clciking on + button > you can see all PA, PSA, EG & ESG details what user is having access.
    Note:- To see technical name  go to Utilities > Technical names on
    To see error details go to SU53 from error screen
    Regards,
    Purnima

  • Cant use more than one authorization group per report with SBO CR Basic

    Cant use more than one authorization group per report with SBO CR Basic.
    I have installed on SAP Business One SBO 2007 SP00 PL49 the Crystal Reports Basic 2.0.0.7.
    i have defined two users, manager and supervisor.
    I have defined two groups, M and S.
    Manager belongs in managers (M), and supervisor is assigned to the supervisors (S).
    i enter to one report, disable the public option to enable group authorization, and then check M group.
    Manager can see the report, but Supervisor is not allowed. So far good.
    Then i uncheck M, then check S in the report properties, and Manager cant get in, supervisor opens the report, So far good.
    But when we check both Groups or more, only the M group authorization appears to work, and S group users cant acess, even the report is allowed for that group, also happens with all the groups appart the first (2nd, 3rd, 4th, etc.).
    It seems that a report can manage a single group, but i have to be shure to tell this to the customer.
    So far we have included all Manager users to the S group in order that only S group is used and authorized users can use, but this is duplicating user participation in groups, and it would be much easier to check the desired groups for a single report.

    Cant use more than one authorization group per report with SBO CR Basic.
    I have installed on SAP Business One SBO 2007 SP00 PL49 the Crystal Reports Basic 2.0.0.7.
    i have defined two users, manager and supervisor.
    I have defined two groups, M and S.
    Manager belongs in managers (M), and supervisor is assigned to the supervisors (S).
    i enter to one report, disable the public option to enable group authorization, and then check M group.
    Manager can see the report, but Supervisor is not allowed. So far good.
    Then i uncheck M, then check S in the report properties, and Manager cant get in, supervisor opens the report, So far good.
    But when we check both Groups or more, only the M group authorization appears to work, and S group users cant acess, even the report is allowed for that group, also happens with all the groups appart the first (2nd, 3rd, 4th, etc.).
    It seems that a report can manage a single group, but i have to be shure to tell this to the customer.
    So far we have included all Manager users to the S group in order that only S group is used and authorized users can use, but this is duplicating user participation in groups, and it would be much easier to check the desired groups for a single report.

  • Maintaining access for different Pers Area for different Infotypes.

    Hello,
    We have two Pers. Areas.
    1000 and 1020.
    HR coordinator would like to see Certain
    Info types(9011) for 1000 and 1020 &
    other infotypes for 1020 ONLY in PA20.
    I tried to put the P_ORGINCON
    with different PA as below.
      Authorization level            M, R
      Infotype                       0000, 0001, 0002, 0008
      Personnel Area                 1020
      Employee Group                 *
      Employee Subgroup              *
      Authorization Profile          *
      Subtype                        *
      Organizational Key             *
    Manually   HR: Master Data with Context
      Authorization level             M, R
      Infotype                       9011
      Personnel Area                 1000, 1020
      Employee Group                 *
      Employee Subgroup              *
      Authorization Profile             *
      Subtype                               *
      Organizational Key               *
    We are not maintaining the Org level permission for this Role.
    Please advice.
    Regards,
    PT,

    Hi,
    look here:
    http://help.sap.com/saphelp_47x200/helpdata/en/49/4398375ae2f84ae10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/08/514e2143b511d182b30000e829fbfe/frameset.htm
    A.

  • Per-service SID's are not being granted correct permissions

    Hi,
    I had posted this here :
    https://connect.microsoft.com/SQLServer/feedback/details/770984/per-service-sid-s-are-not-being-granted-correct-permissions, but no response as yet.
    When installing SQL 2012 (on a VMWare VM), based on the following article :
    http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110), I have noticed that the SQL per service SIDs are not being granted the correct permissions. From the initial install, the following is what was observed (the red x's being permissions that
    should have been granted but were not).
    When re-installing and changing from specifying a domain account, to the default values, during set-up, the 4 service SIDs that were not added to 'Log on as a Service' initially were then correctly granted permission, but the other 4 in 'Bypass traverse
    checking', 'Adjust Memory Quotas for a process' and 'Impersonate a Client after authentication' were still not added.
    When running a repair on this install, 'NT Service\MSSQLFDLauncher' was then granted the correct permissions, but 'NT SERVICE\MsDtsServer110' was still missing 'Bypass traverse checking' and 'Impersonate a Client after authentication'.
    This also resulted in the installation of Reporting Services - Native failing in the original installation with 'Attempted to perform an unauthorized operation'.
    If anyone has recently installed SQL 2012, can you check (via gpedit.msc) that the correct 'User Right Assignment' was granted to the per Service SIDs as per
    http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110) ?

    Have you resolved this yet?  Group policy for the OU with my desktop removes all SQL per-service rights.  If group policy is your issue, I'd be interested in how some are retained.  
    Randy in Marin

Maybe you are looking for