PPOME problem

hi
we are facing one issue related to PPOME
when we create and save the  new position in  PPOME the data saved successfully. Then all the employees names disappear even if  we search the employee names,we cannot see the name of the employee while we can see the emplouyee id.
could you please help me out
regards
utkarsh

ok
That's great. So I am assuming the problem is that you are not able to see the employee name when you click on the position in the org structure.  It may just show nothing below the position. 
Could you try checking the table T77S0 and look for integration switch PLOGI-ORGA = "X".  This may be the problem.
Do let us know where you are not able to find the names exactly on PPOSE.
Hope this helps.
Best Regards.
Karan.

Similar Messages

  • Problem with Period selection in PPOME transaction!

    Dear All,
    I have a very strange problem while selecting the time period in the PPOME transaction.
    While selecting the  "date and forecast period" option from the "settings" option in the menu bar, the time period in the preview the PPOME transaction must show as 3 months by default. But for my user ID when i select the preview period, the month field is displayed as blank and the end date is always defaulted to current date.
    Is this time period coming from any configuration? I would like to know is there any way to by which we can change and save the time period settings.
    Thanks,
    sridharan

    Goto PE03->ABKRS in Change mode. You will be able to uncheck or check the fields.

  • Problem PPOME - Organization and Staffing

    Hi Experts,
    I have the following problems concerning Organization and Staffing interface :
    1) When trying to create a new Organization Unit or Position in the Basic Data Tab the Abbreviation and Description are lost, instead it keeps the standard ( like New org. unit   New Organizational Unit), although I can see the correct Abbreviation and Description in the Overview Area. It seems like a bug, but still couldn't find an appropriate note about it. My customer uses SAP ECC 6.0.
    2)I would like to insert new tab pages in the Detail Area with custom pd infotypes. I managed to display one (through configuration in the Hierarchy Framework) but doesn't appear properly. Table T77OMTABUS looks like this :
    OME0     O     ACCNTNG             2     SAPLRHOMDETAIL_APPL
    OME0     O     ADDRESS             3     SAPLRHADDRESS
    OME0     O     BASIS_O             1     SAPLRHOMDETAIL_BASE
    OME0     O     COSTDIST             3     SAPLRHOMDETAIL_APPL
    OME0     O     HEADC_EX       6     SAPLHROM_HCP_PLANNING_EXT
    OME0     O     HEADC_MB      6     SAPLHROM_HCP_PLANNING_EXT
    OME0     O     HEADC_O             6     SAPLRHOMDETAIL_APPL
    OME0     O     IT1000             1                                            
    OME0     O     IT1002             2                                            
    OME0     O     IT1003             14                                            
    OME0     O     IT1509GS             15     SAPLHRFPM_OM_ANNOT_TAB
    OME0     O     IT1509GW             15     SAPLHRFPM_OM_ANNOT_TAB
    OME0     O     IT9902             7                                            
    OME0     O     TASKS             15     SAPLRHOMDETAIL_BASE
    OME0     O     WORKTIME       5     SAPLRHOMDETAIL_APPL
    Any ideas about what might be configured wrong??
    Thanks in advance
    (Points to be awarded)

    My problem resolved after implement note 1156683.
    if your problem is still, you can also try.
    Regards,
    Ankit

  • Problem with PPOME - PP01

    Hello experts, in tcode PPOME i select a position and then i go thru menu GOTO->Detail Object ->Enchanced object description...  the system return this message... No data found for the values entered...someone know what this mean and the solution for solving this... i normal way this path give acess to tcode PP01
    Regards and thanks in advance.
    Mário

    Hi,
    This almost sounds like you have a position relationship in the system to a position that has somehow been deleted.
    Can you check if youc an get to this position via PP01 directly?
    thanks.
    JB

  • Problem on Assigning Person to a Position

    Hi SAP-HR folks,
    I would like to ask for your assistance on my problem below.
    I've hired a person using New Hire action type. During the hiring process, I've assign the person to a position which I've created also. Then, there is a need for this person to be re-assign to another vacant position. Re-assigning should be done using drag and drop in transaction PPOME.
    I've successfully done the re-assignment of this person to another vacant position using drag and drop. But according to the test scripts that we are following, the expected result should be that the system should refuse the re-assignment after filling in the dates. Re-assignment can only proceed after delimitation of the assignment of person to position.
    May I know if the action that I've done is a normal behavior of SAP? In the case the test scripts are right, may I know on how to successfully follow the scripts?
    Thanks in advance!

    whenever transfer employee from one positon to other position don't do this by drag and drop from ppome.
    just do this by PA40, Org Reassignment action.
    as ppome not support 100% for such change.
    and also if u do this from ppome, it0001 can't be updated for both positions.

  • Error message while changing the delimit date of a job in ppome

    Hi experts,
    I have delimited a job in ppome to date 11.05.2011. But now i want to remove that delimit date and change it to unlimited(31.12.2999). when iam trying to change the delimit date it is showing a popup message 'select a date between 15.11.2008 and 11.05.2011'. Can anyone say why it is showing this message. how can i delimit that job again to 31.12.2999.? Same problem with the position also.
    Pls help...

    Dear Priaynka,
    Thanx for ur reply, I am again furnishing below the details:-
    I have to change the Valuation Class of the material :-
    7 POS for which Goods Receipt & Invoice Receipt have been done from period 1 to 7.
    1 PO for which Goods Receipt & Invoice Receipt have not been made.
    All the material reced in period 1-7 have been consumed by MFBF. Now no material is available in the material in that plant.
    Should I change the valuation class by deleting the line item of all the PO's  7 POs + 1 PO.
    Please advise, as the fresh PO will be made with new val class and GR/IR and Consyumption will happen after the change is made.
    Please advise if I am wrong in the procedure.
    Regards,
    Alok

  • Problem in Assigning Relationships (Org Mgmt)

    Hi,
    The system does not show (neither through PPIS or through PPOME) organizational structure when I create A003 (Belongs to) relationship between organizational units (Object Key 'O'). The same is shown when I change relationship to A002 (Reports to).
    Moreover, system does not show (in PPOME & PPIS) positions that are assigned A003 relationship with object key 'O', but the same is shown when this relationship is changed to A002.
    Now, a position is supposed to report to a super position & for which relationship has to be A002 (Reports to). But when this is assigned, the system does not show it throguh PPOME / PPIS.
    What shall I do to fix the problem? Moreover, can anyone tell me which tables store the OM Objects (i.e. OUs, Positions, Work Centers, Jobs, Persons & Relationships)
    Rgds,
    Tapan Shah

    Hi,
    The display characteristics of PPOME is determined by evaluation path SBESX.
    Please check table T778A.
    You may change the relationships displayed using this table.
    However, this display behavior is determined due to some logic and think twice before changing the standard system.
    As of your requirement, 002 relationship can be used btw O objects instead of 003, why do you want the second?
    And the tables for OM objects are basically HRP1000 (object names, etc), HRP1001 (relationships)
    Regards,
    Dilek

  • Duplicate period appearing in German when creating new Org Unit in PPOME

    Hi Guys,
    My users are encountering a problem when they create an Org. Unit/Position in PPOME.
    Whenever a new Org. Unit is being created (lets assume with the validity date of 01.11.2006), an earlier period would automatically be created, thus making the object having 2 periods.
    Upon clicking on the "Select Period" icon for the object in the Detail area of the screen, 2 lines of periods are being displayed.
    When i view the second period, i would see the correct details of the Org. Unit that was keyed in by the user.
    However, when i view the first period, the details are all on German language (this record was not created by the user at all).
    Therefore, i checked the tables T528B and T528T, i found duplicate records for certain Object IDs. It seems the Org Unit that was created by the user is being appended after the Org Unit that is in German.
    Any ideas on how to clean up those lines of data that is appearing in German and prevent such an occurance from happening in future?
    Thanks in advance

    Hi Duxton,
    Thanks for the reply.
    I followed your instructions but i am unable to detect anything out of the ordinary.
    I'm compared the configuration in Development again Production and they are the same.
    However, the problem i described in this thread is not appearing in Development. It is just happening in Production.
    Any other ideas?
    It's not really affecting my client's business process but i would like to know what is causing it out of curiousity

  • Tab in PPOME (no subscreen found)

    Hello everyone,
    I have a problem with one tab that i created in my PPOME.
    I already created several ones, but for one of them, I have the error message "no subscribe found"
    Like the other tab that i created, I have a dynPro 7000 in my IT and i put data in the tabs TT77ID and T77OMTABS.
    But for some reason, PPOME doesn't find any sub screen.
    Hope somebody will be able to help me.
    Have great day
    sincerely,
    Quentin

    No, I did not.
    I deleted the FCODE name, and changed the type for subscreen.
    But after doing such, the error message is still shown.
    The screen was active, and now the subscreen is active.
    --Edit
    PS: In my subscreen 7000 there are some calls to modules, that are defined in MP900330. Is that a problem?
    Pl check my screen 7000 code:
    PROCESS BEFORE OUTPUT.
    MODULE MODIFY_SUBSCREEN.
            general infotype-independent operations
      MODULE BEFORE_OUTPUT.
            infotype specific operations
      MODULE P9003.
      MODULE HIDDEN_DATA.
    PROCESS AFTER INPUT.
    process exit commands
      MODULE EXIT AT EXIT-COMMAND.
            processing after input
            check and mark if there was any input: all fields that
            accept input HAVE TO BE listed here
      CHAIN.
        FIELD P9003-BEGDA.
        FIELD P9003-ENDDA.
        FIELD P9003-CATEGORIA.
        FIELD P9003-CARREIRA.
        FIELD P9003-QUADRO.
        field nome_quadro.
        field nome_carreira.
        field nome_categoria.
        module get_desc on chain-request.
        MODULE INPUT_STATUS ON CHAIN-REQUEST.
      ENDCHAIN.
         process functioncodes before input-checks                      *
      MODULE PRE_INPUT_CHECKS.
            input-checks:                                               *
      insert check modules here:
        process function code: ALL fields that appear on the
         screen HAVE TO BE listed here (including output-only fields)
      CHAIN.
        FIELD P9003-BEGDA.
        FIELD P9003-ENDDA.
        FIELD RP50M-SPRTX.
        FIELD P9003-CATEGORIA.
        FIELD P9003-CARREIRA.
        FIELD P9003-QUADRO.
        field nome_quadro.
        field nome_carreira.
        field nome_categoria.
        module get_desc.
        MODULE POST_INPUT_CHECKS.
      ENDCHAIN.
    Message was edited by: Filipe Guerra

  • IT 1008 tab is missing text in PPOME tcode.

    Hello Experts,
    We have added Infotype 1008 as tab page in PPOME. While viewing the tab page it shows up the input fields but once the values are entered the text description of inserted value does not show up.
    The IT 1008 uses programme MP100800 and Screen 7000.
    thanks
    Sunny

    Hi Jürgen L. ,
    This problem is not yet resolved.
    I have checked for all the Doc type by changing the Text filed as optional, still it is not appearing, I have replied to you also.
    Pls can you help me out.
    is thr any wey like can it got suppressed,
    How tis is supressed.
    Regards,

  • Employees are not listed in PPOME or HIS ?

    Hi,
    I used BDC to migrate personnal data with PA40 . ( Hire person where I fill the position ) , But then I can not see that person in PPOME or reporting tool HIS , Although these persons are assigned well with approriate position & Org unit . Even I check PO13 for the positions , There is no person there !!!!
    So is there any problem with my config ?
    Thanks

    Hi,
    Check next steps
    IMG>Personnel Management>Organizational Management>Integration>Integration with Personnel Administration
    1. Set up Integration with Personnel Administration
    2. Transfer Data from Personnel Administration
    3. Prepare Integration with Personnel Administration
    4. Transfer Data to Personnel Administration
    5. Check Integration Consistency
    Before you run any of reports please read documentation available.
    I would recommend "step 2:Transfer Data from Personnel Administration" not to be executed if not needed because it could mess up you OM data if not run correctly.
    Check the others and let us know the result.
    Regards,
    Ani

  • PPOME HOLDER NAME IS not displayed

    Here is the case ..whena person is retired ..wht we do currently is run a retire action ...and the person is placed in a retirement org unit ..Wwe go to ppome ..we can can c the person who has retired .
    Now when he is dead ..his wife needs to get the benefits ..or his wife carries forward his benefits .
    In such a case wht we do ..is to just the Wives name on the system ..we perform anthoer action survivor with benefits .
    which is similar to Hire action ..where she is hired on the position of the her reitred husband .
    It delmits the postiion which the Husband held as per the date of his death and the Places the wife as a new postion Holder .
    When iperfrom this action everythign goes fine ..series of infotypes are maintained .
    I check pa30 ..all details 1 ,2 infotypes are updated as per the spouse details .
    Now thw problem starts
    when i go to ppome and enterthe position no ..It shows the Holder icon but no details ..Name nothing no details ..
    Wwhat could be wrong ..
    I guess something goto towith the ppome screen where its pulling the details ..
    Kinldy help me out here .
    Regards
    San

    As Arti stated check the details for holder relationship in PO13. If the relation is not created then you will have to run RHINTE00 report for the spouse.
    Are you loading the spouse action through PA40 or through some program?
    If program then you will have to run report as stated.
    Also in PPOME check the period for which you are checking the data.
    cheers
    Ajay

  • Objects not displayed in Org Structure (PPOME)

    We made big changes in the existing organizational structure (new objects) with start date 01.01.2012.
    Old objects were terminated by 31. Dec 2011.
    In PPOME with entry date = 01. December 2011 I can only see the new objects but not the old and still valid ones.
    In table HRP 1000 and HRP 1001 all relationships are correctly maintained - but I don't see any of the objects in PPOME.
    Big problem, as workflows don't  work any longer.
    Thanks!

    I have the same problem, I have updated relations of some positions. HRP1001 looks correct, with limitations on correct dates.
    But on PPOME I can see the same position under two organizations, both with end date 31.12.9999.
    This is an impossible case, when standart PPOME controls are concerned, but something happened, and I could not find how to correct it.
    If you have any suggestions, please share.
    Thanks.

  • Input fileds not appearing in IT1005 Planned Compensation in Tab for PPOME

    Hello friends,
    The business requirement is:
    - add IT 1005 Planned Compensation as a tab page in T.code PPOME/PPOCE
    - I configured the following in system:
      - IMG>Personnel Mgt>Org Mgt>Hierarchy Framework>Integrate New Infotype>  >Add Infotype as Tab Page in Detail Area>Define your onw tab page>Tab Page Definition (this is option one)>
    I added Tab page as z1005, ticked infotype specific and infotype 1005
    > Scenario Definition (Hierarchy Framework) > select OME0 >
    Tab Page in Scenario for each Object Type >
    I entered object type S (as we need it for Position), tab page: z1005, and respecitve sequence, I did not enter any report name, screen no, FM for Icons and Donot display is unchecked.
    Once I did this configuration and run PPOME tcode I got the tab page there but in the input fields it is blank and showing text like ##################### just a row like this.
    However when I do the same configuration for IT 1050 Job evaluation, it is working fine there. But 1005 is throwing the above error.
    Can anybody faced the same problem and resolve the above issue or incase some SAP Notes are available for the same.
    thanks
    Sunny

    In my opinion, that would be "Best Practice".  Although I think that term is over-used. Everything varies by each client's needs/wants and what functionality they use in the system.   That being said, even if they're not using portions of functionality today, it's better to plan for it.  That way you don't have to redefine the catalog every time you want to use something new.
    There really is no "correct" ratio of Jobs to Positions.  For a smaller company you're going to have fewer positions assigned to each job.  For a larger company, you're going to have more people doing the same work, and therefore more positions assigned to a lot of your jobs.
    I generally recommend a new job is created when there is a difference in one or more of the following.
    u2022   Tasks (Function) - Administration vs. Manufacturing vs. Engineering, etc.
    u2022   Responsibilities - Supervising other people vs. not supervising, Lead, Trainers, etc.
    u2022   Pay Range (significant differences) - Except for differences based on location (Someone in San Fran/Bay area is
        going to get more money than someone doing the same job in Iowa; different amts/currencies for different countries)
    u2022   Qualifications/Skills - requires a degree or certificate vs. job that doesn't
    With your client, I would recommend having the approximately 200 Jobs, and creating the existing Jobs as Job Families so they could still report on data as they see it today.
    ...Danialle
    Edited by: Danialle Rook on Aug 12, 2010 9:49 PM

  • Position showing in PA30 not PPOME

    Hi,
    I am using ECC6 and we have a problem where some times when an action is run we can see the employee is linked to their position via their PA record , however in PPOME the employee is not showing as occupying the position. If I run RHINTE00 report this corrects it, however this should not be happening in the first place.
    I've checked T77S0 and PLOGI ORGA is switched on.
    Has anyone else encountered this issue and found what is causing it and how to correct it?
    Thanks
    Tom

    Hi Tom,
    This usually happens when you upload the data either through BDC or LSMW and we have to run the RHINT report for the data to be seen in PA / OM.
    However, in the normal process if the PLOGI ORGA integration switch is on in table T77S0, then hiring an employee in PA reflects him in the OM struture.
    Hope this helps.
    Thanks
    Ranjeeta

Maybe you are looking for