PPOMW - changes in production not allowed

Hi,
We would like to assign a cic-profil to a user in transaction PPOMW in production environment. After saving the changes the error messages u201Cmandant 100 changes not allowedu201D occurs.
Our consultants told us, that we have to change to status of the production environment in SCC4 before changing profiles in PPOMW.
In my opinion this solution is not useful.
Is there another solution or workaround ?
Kind regards,
Andreas Ament

Hi
Did you have access previously?
It is likely that the problem comes from the automatic transport connection configuration in your productive system. You have more information on this regard in notes 208746, 163897 and 33582.
Please check the following switches in table T77S0:
TRSP ADMIN       (Deactivate automatic transport in infotype 0001)
TRSP CORR        (Transport Switch (X = No Transport))
Please check the result with both switches set to 'X' (= no transport). After this change you should not be getting any error message when saving.
Regarding this parameter change in T77S0 view, please take into account that you have two possibilities: you might want to change this in all the systems, or you might want instead to change these values just in the productive system.
a) For the first option it will be enough to set these "X" in the development system and then transport the corresponding request
   with this change to the quality and production systems.
b) For the second option, you can allow changes in T77S0 view in the productive and pre-productive system, so you can mantain a different value there compared to development and quality.
      1- enter SOBJ transaction
      2- search T77S0 object
      3- double click on it
      4- activate the current settings flag
Regards,
Eddie

Similar Messages

Adobe Acrobat 7: Can not insert pages, changing the document: Not Allowed, but Security Method set t

In Adobe 7, I need to add some pdf pages to the end of a document, but the insert pages (as well as all other items under Document> are greyed out.
On the document properties\ Security> the document restrictions summary says "Changing the Document: Not Allowed", but the Security Method in the drop down above is set to "No Security"
Thanks!

If there are form fields, then whoever added them probably used the forms menu, not the Acrobat form fields. Thus the PDF was converted to Designer and you are out of luck. The FORMS button found in various places in Acrobat 7 and latter takes you to Designer, not the Acrobat form tools. The latter are located in the tools menu.

Changing The Document: Not Allowed

Hi,
Kindly refer to this link - https://forums.adobe.com/thread/1565222 regarding with our issue on PDF files created using Acrobat Pro 7. When we open the files using higher versions the Changing the Documents and Document Assembly always marked as Not Allowed.
Thanks

Attention: Acrobat Product EXPERT (Adobe Support HelpDesk)
PLEASE Reply

Changing Facebook User Not Allowed? Oops.

I decided to try the Facebook Publishing "feature". Unfortunately I did not notice when I did the authorization that the browser was pointing to an OLD Facebook account. Now, (after deauthorizing that account) I can't authorize the correct account. I get the message:
Changing the facebook user for a saved connection is not allowed
Is there any way around this?
Gee, one little mistake and I'm blocked for life?
Steve

The answer appears to be the following:
Right Click on the original Facebook Publish Service and select "Create Another Publish Service via Facebook..."
Establish your connection to Facebook, giving this one a new name.
Right Click on the original Facebook Publish Service and select "Delete Publish Service"
Done.
Not exactly user friendly! But, it works. ;-)
Steve

Account email changed but will not allow use

I changed my account email and veryfied it. Now, it says I have not verified it, but when I click yes for instructions it says I have verified it. HELP!!!!

Use the email form here > Apple - Support - iTunes Store - Contact Us
Tunes Store & Mac App Store: About your Apple ID and password

HT201184 Since I upgraded to Lion MACOSX.10.7.3 my toolbar does not fully load and my Airport settings change and do not allow me access to the internet even though I lock my preferences. I'm going crazy trying to fix this problem.

Since upgrading to Lion OSX.10.7.3 I am having network problems. It changes my preferences even though I lock them. I cannot connect to the internet most of the time. How do i lock my preferences so the program will not change them? When it changes them it also freezes the curser where it won't work. I'm going crazy trying to fix this problem. Please help me!

First, try the troubleshooting stepsunder "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
Then try republishing your website...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
See this page for using iWeb with Lion/Mountain...
http://www.iwebformusicians.com/iWeb/mountain-lion.html

Changing Period Indicator not allowed in numbering series setup

Hi to all dear experts... and happy new yaer!!!
I need a little help to solve thi s issue.
Today i create a new posting period for year 2015 (sub peridos => months)
After that, i try to change the period indicator in ADMINISTRATION => SYSTEM INIZIALIZATION => NUMBERING SERIES, but at the update, i receive an error message like:
SERIES ALREADY IN USE -Name of the series- [Message 3535-9]
Before update to 9.0, every year i was able tio change the period indicator in Numbering series setup.
Have some advice??
Thank's in advance

Hi.
Attached you can find a screenshoot with error message.
For the highlighted row n. 8, i try to change the period indicator from 2014 to 2015.
Updating, i receive the error "NUMBERING SERIES ALREADY IN USE [Message 3535-9]"
I'm sure this operation was possible until the 8.82.
P.S. The language system is in italian.. sorry...

BT Line product not allowing broadband

Hi,
Im trying to order broadband from a company that isnt BT, but when I put my BT phone number into their internet ordering page it says my phone line has a product or service that is making my phone line incompatible.
Any idea what this might be? As far as I am aware I dont have any additional services on my phone line.
Thanks.

Have you phoned this company and asked what it is?
BT may have a 'tag' on the line from a previous service provided by them. Your Non-BT supplier should be able to ask them to remove this tag and release the line.
For a read..
http://consumers.ofcom.org.uk/tell-us/telecoms/service-problems/tag-on-line/
Check your exchange or major service outagesIf someone has given a helpful answer, please click on their Ratings star on the left-hand side. ***

IWeb does not save changes and will not allow republishing

I have created a new site on my iWeb which is now accessed by a separate web address. I first published a new site within this domain which worked fine. Now when I make changes and save, the blue progress bar indicates a save, but when I go to publish the green publish arrow is greyed and I cannot publish. What's worse is when I go back to the altered page, the changes are gone.
I can republish other parts of the site (which are red and I haven't yet updated) and they update fine. But once done, there's way to republish.
Any suggestions.

Have you tried using the File->Publish Site Changes or File->Publish Entire Site menu options? Also try deleting the iWeb preference file, com.apple.iPhoto.plist and rebooting.
OT

Address still in use; change to validity not allowed

Hello all,
I use the program BBP_VENDOR_SYNC to synchronize supplier data between SRM and R/3.
I noticed that if the supplier in SRM have a relation with a contact person (table but052) the address data can't be change.I can't change the "E" error type to "W" because it is written on the code. I also try OBMSG transaction.
Any idea?
Best Regards,
Nacho

Hi
I think you can change contact person data via manage business parner (WEB).
since he has a separate BP in SRM.
where did you setup w e for which messagge?
regards
muthu

I have Premiere Pro CS5. I just had to switch out my hard drive and even though nothing else changed, Premiere is not allowing me to use the GPU acceleration mode. It's grayed out. It was working fine before I switched out the hard drive. What do I do?

The specs on my computer are correct for GPU acceleration. It has been working fine but my RAID 0 drive failed and I replaced it and now Premiere no longer recgonizes it. I am assuming I need to reset something but I can't figure it out. What do I do?

You will need to reapply the cuda hack, see Ann's answer:
Re: How to activate Cuda with a quadro k2000 into premiere cs6

IOS5 Reminders, location disabled if location changes are not allowed

Hi,
the location feature of Reminders works, but as soon as I don't allow changes to Location, I can't add or remove a location to a reminder.
Location service for Reminders is enabled, just changes are not allowed under Restrictions.
This looks like a bug.
thanks for any help,
cheers,
-g
iPhone4, iOS5

Same problem here. (iOS 5 / iPhone 4)
Location reminders enabled in location service, changed in restrictions not allowed.
Now I can only use time settings in the reminders app, the location function is disabled (grey).
I do not want to leave the system open and allow changes to the location services - especially Find My iPhone - just to use this feature, but I would like a fix for this.
Anyway to send a bug report for this somewhere?

Data source could not able select NOT ALLOWED DTP Direct Access

He Experts,
I have a Problem, I have searched in Fourms and Blogs also but I did get any solution .
I am developing HCM reports, as per my requirement extracting data through customized Function Module.ZGET_REQUI_DETAILS_NEW1.
I can find data in RSA3 and it is loaded sucessful in BI, this I was comformation with the monitor screen
all indicators are in Green Trafic signals.
then I came to PSA but I cann't see data here one pop up is comming Error & in help message no D0313
I found one thing the request which is in PSA come with GREEN (request updated to Target)
rest of all standard are in Red untill transfer to targets.
I found secound thing in the DATA SOURCE in Extraction Tab option Direct Access is selected with
Allowed, but I want to sent data to standard DSO.
that options are in disable mode even in edit selection.
Queires:
1. How to change the option NOT ALLOWED DTP Direct Access insted of Allowed in Data Source(ZREQUI_FM)
2. what is will do to see data in PSA.
Regards
Vijay

Dear Vijay,
Iu2019m going to try helping you,
In the ECC DataSource setting tcode: SBIW. You should check in your ZREQUI_FM DataSource the following setting of value in the DataSource: Costumer Version Edit field u201CExtractionu201D the following field ExtractStruct, Direct Access and Delta Update:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/fb69a990-0201-0010-64ab-cbbfc6f0f75b
I hope this guideline can help you to find the answeru2026.
Luis

Change Password does not show Correct Error Message

Hi,
I am using a password policy which says that Characters not allowed are @&()|\";'<>+=/?. :}{][
When the user try tochange the password and try to put any of the above character,
then OIM Web console shows an Password Policy error, which is correct.
The Problem comes in when the Webconsole does not show the full range of the unsupported characters,it only shows the below error
Password Policy Error
The following password policy rules are not met:
Invalid Chars=/?. :}{][
Ideally it should have shown the full set of unsupported characters, which led the user to do the mistake again by selecting same old special charcter.
Although,the logs at the back end, shows full set of characters.
My Question ,is how could this be fixed,what customization has to be done if any ,for reflecting this change on WebConsole page.
Cheers
Ak

Hi,
I resolved the issue by changing the Characters not allowed to =@&()|\";'+/?. :}{][
instead of @&()|\";'+=/?. :}{][
What i figured out is all the charcters after = are only getting printed at the Web Console, so i reshuffle the charcters and put = in the beginning.
And it is working fine.....
Strange huh.....:)
Cheers
Ak

System setting does not allow changes to be made to object LSYS

Hi
Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
System setting does not allow changes to be made to object LSYS
Why it is saying like that . But i can able to include the other process types in the process chain .
regards
mohammed

Dear Mohammed,
Since you are trying to create process chain in production system.
Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
Check the settings in SE06. system would be non-modifiable for sure.
in SCC4, settings ->"changes to the cross customizing objects would be not allowed"
These two settings/configurations would not allow any development or changes or edit or create in production.
Please check with your basis folks and proceed further.
Hope this would help you more in understanding

PPOMW - changes in production not allowed

Similar Messages

Maybe you are looking for