PPP and virtual-access2 is down, please help
Dear All,
Since yesterday we have problems with our Cisco 878 SDSL router/modem. We make use of a standard script from our ISP (KPN.com). When we have uploaded the script by Windows Terminal, the router is unable to establish a ppp connection with our ISP. Virtual-access2 link is up, but the protocol is down.
Please find underneath the standard script from KPN.com. Please help we have already lost 1 day with "trial and error" and the service and support is not that great from our ISP.
Thanks in advance for your reply.
Cheers.
FYI
version 12.4
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
no service udp-small-servers
no service tcp-small-servers
no service dhcp
hostname IDSL-ADV-Cust-CPE-SDSL
logging rate-limit console 10 except errors
boot-start-marker
boot-end-marker
ip subnet-zero
ip cef
no ip dhcp-client network-discovery
ip dhcp pool IAS
import all
origin ipcp
ip name-server 194.151.228.18
ip name-server 194.151.228.34
controller DSL 0
mode atm
line-term cpe
line-mode auto
dsl-mode shdsl symmetric annex B
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface ATM0
no ip address
no shutdown
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description To IAS over ADSL Access Router
pvc 2/32
encapsulation aal5mux ppp dialer
dialer pool-member 1
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface Vlan1
ip address pool IAS
ip verify unicast reverse-path
no shutdown
no cdp enable
hold-queue 32 in
interface Dialer0
ip address negotiated
ip verify unicast reverse-path
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap callin
ppp chap hostname KPN
ppp chap password xx
ppp pap sent-username kpn password xxx
ppp ipcp dns request
ppp ipcp mask request
ppp ipcp address accept
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
no ip http secure-server
control-plane
scheduler max-task-time 5000
end
Hi,
beside that the proposed config has no NAT, it appears fine. Can you send output of "show dsl interface" and "show atm PVC 2/35".
Similar Messages
-
My screen won't work, i have tried turning it off but i cant swipe the power down button because my screen doesnt work. I have only had my iphone 4s for one day and this has happened, someone please help me.
Did the trick! Not sure what I did to cause the screen to go numb, but this worked perfectly!!! I cleaned the screen and must have inadvertently selected something that locked the screen. This perfect solution kept me from having to run to the Apple Store. Many thanks.
-
I did force shutdown on my MacBook Pro (2006 year, 15.4"), so, when I tried to boot, it shows apple logo (as usual) and shuts down. When I booting MacBook with Option key pressed it shows lock icon and field for password. Please help me.
Wait for advice on repairing a damaged filesystem. Forceshutdown stops processs in mid-stream and leaves some parts not-valid.
Do not proceed until you get that avice. -
My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue
i have the same problem...my ipod is 4th generation?uggghhhhh
-
I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
ChrisMichael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David -
Macbook Pro Mid 2009 Processor 2.26 GHz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3. iOS 10.10.1 (14B25). My mac is running slow and have ran EtreCheck. Please help me fix my mac. Thanks!
Problem description:
My mac has been very slow lately. Any suggestions?
EtreCheck version: 2.1.2 (105)
Report generated December 14, 2014 at 8:15:29 PM PST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:54:52
Disk Information: ℹ️
Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
MacHD (disk0s2) / : 159.05 GB (49.15 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Startup Items: ℹ️
DVD3EnablerService: Path: /Library/StartupItems/DVD3EnablerService
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist [Details]
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.coreservices.appleid.authentication.plist [Details]
[failed] com.apple.icloud.fmfd.plist [Details]
[failed] com.apple.secd.plist [Details]
[failed] com.apple.security.cloudkeychainproxy.plist [Details]
[failed] com.apple.telephonyutilities.callservicesd.plist [Details]
Problem System Launch Daemons: ℹ️
[failed] com.apple.ctkd.plist [Details]
[failed] com.apple.icloud.findmydeviced.plist [Details]
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist [Details]
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.wdhelper.plist [Details]
[failed] com.apple.xpc.smd.plist [Details]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.nds.pcshow.plist [Support]
[invalid?] com.nds.pcshow.uninstall.plist [Support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacHD: Disk size: 159.05 GB Disk used: 109.90 GB
Destinations:
KINGSTON [Local]
Total size: 30.88 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 30.88 GB < (Disk used 109.90 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
0% AppleSpell
0% SystemUIServer
0% powerd
0% Google Chrome
Top Processes by Memory: ℹ️
131 MB softwareupdated
112 MB Google Chrome
41 MB Finder
34 MB Google Chrome Helper
32 MB WindowServer
Virtual Memory Information: ℹ️
51 MB Free RAM
587 MB Active RAM
551 MB Inactive RAM
350 MB Wired RAM
10.96 GB Page-ins
865 MB Page-outs
Diagnostics Information: ℹ️
Dec 14, 2014, 07:37:58 PM Install Adobe Flash Player_2014-12-14-193758_[redacted].crash
Dec 14, 2014, 07:21:27 PM Self test - passedPlease describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
The many "failed" warnings that etrecheck sometimes spews mean nothing. Those warnings are not a reason to reinstall the OS, or to do anything else at all. They should be ignored.
The better your description of the problem, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup. -
I have an original Ipad, I tired to update it, but during the update it gave me an error message (1602) an now it just has a picture of itunes and a ubs cord? Please help!!
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
everything freezes i can't even force quit i have to shut off by holding the power button down please help me with this. thanks
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
During the creation of my apple account I have selected two questions and written the answers. Now to purchase gems for the game I have started the steps. It is calling those answers and I have forgotten. Please help to come out of these security questions.
The page that you posted from tells you how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should let you reset them.
If you don't have a rescue email address then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use -
My macbook shut off and wont turn back on. Im pretty sure it is charging. The LED light is on but only when the laptop is closed. Im in grad school and have lots saved. Please Help!
ronicr76,
First it would be helpful if you post the exact model, year and OS version you have.
> The LED light is on but only when the laptop is closed<
So that light is the sleep indicator and tells us that the laptop is going to sleep when you close the lid. That would be normal behavior so the machine is still working. Possibly you're experiencing a backlight failure. With the machine supposedly "on" use a flashlight to carefully examine the screen. Do you see the desktop? Yes? machine is still running and something is wrong with the backlight.
You should immediately backup your computer or at the very least pull vital files off. With the computer hooked to another Mac (The way this is done depends on the exact MacBook, E.g.FireWire 800 to FireWire 800.) Then you restart the computer and hold the "t" key down. This puts your MacBook into "target mode":
How to use and troubleshoot FireWire target disk mode
Once your files are off try an SMC reset:
Intel-based Macs: Resetting the System Management Controller (SMC)
Are you able to get the backlight back on by opening and closing the display? Yes? Broken backlight cable refer to qualified service place. Even if it doesn't come on and you can still see the desktop with a flashlight it is still probably the backlight. Could be the a backlight problem also. -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
Just downloaded aperture 3.4 update for the app store and now it wont open please help!!
just downloaded aperture 3.4 update for the app store and now it wont open please help!!
Just want to echo this complaint.
I have tried re installing Aperture 3 and I've looked for preferences or something to clear, but nothing helps. It continues to crash each time I open it no matter what. -
Updated my I tunes yesterday and now it wont open, please help
updated my I tunes yesterday and now it wont open, please help
I thought is was too much of a coincidence that the adapter went out the same day, but sure enough it did. Just replaced it and it works fine. Thanks
-
please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!. thanks
Place the iPOd in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!
In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified. To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link. Make sure you are check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.
Maybe you are looking for
-
Can't play mov file in Quicktime!!!!!!
Hi. Got a new iMac. Got Snow Leopard and Quicktime Player (incl QTP 7 in utilities). I'm trying to play a video file. It is recognised as a Quicktime movie (in file info), but when I click on it it says - "xxx.mov could not be opened, the movie's fil
-
User synchronization issue between Active Directory and Solution manager.
Requirement: Synchronize the users between Active directory and solution manager system. <u>What we did:</u> 1. Created RFC connection (LDAP_RFC) for LDAP connector. 2. Created new LDAP connector that utilize the RFC (LDAP_RFC). 3. Create
-
LOGO is printing in REVERSE while PRINTOUT
Hi ABAPER'S....... The below process is in SAPSCRIPTS.I copied MEDRUCK to ZMEDRUCK. I am getting a small disorder while taking the print out ... In <b>ME22N</b> i'm getting the LOGO in correct fashion..But the problem is that while taking the prin
-
I have a valid apple I'd which I use to sign in to the apple community without any problem, but each time I try to sign in to iMessage, it shows me that Username and Password is incorrect please try again. Why is it so?
-
iTunes store or Safari do not open; I'v already deleted both & reloaded from website & still don't work.