PPP, USR56K, ISP, Setup for Solaris/Intel Please.

I am new to Solaris/Intel setup and interested in setting up PPP, usr 56k modem and local ISP. Where do I start... Thanks for any info... Dale. [email protected]

I tryied this guys setup procedure and all works except for when you actually want to connect to the internet.
Nothing happens and the only thing that happens is
pinging the dummy ip adress then just sits there.

Similar Messages

  • Oracle 9 for Solaris (Intel) x86?

    Did oracle drop support for Solaris (Intel) x86? I run a shop with a large scale intel server running Solaris 9 (x86) and would like to try out Oracle 9i on it.
    Please advise: [email protected]
    Thanks!

    You can find information about Oracle product certifications here,
    http://otn.oracle.com/support/metalink/content.html
    You can also find information about desupported platforms in the same place. This link is available from "Get Support" navigation element on OTN home page.

  • Oracle 9i for Solaris Intel

    I would like to use my PC (x86 platform) to install Solaris 8 for Intel as a Database server. But I cannot found any information of Oracle 9i Database for Solaris Intel platform. WHere I can find it? Or Oracle don't support for Solaris for Intel (I found an Oracle 9i Database for Solaris SPARC only).
    Best regards

    The last version of Oracle for Solaris X86 was Oracle 8.1.7...

  • 8i Database for Solaris Intel Platform

    I want to download 8i Database for Solaris Intel Platform, but there is no such link at OTN software download.
    I will greatly appreciate any help in downloading above mentioned software.
    Regards
    Muhammad Siraj

    I believe this is the plan. However, there is a bunch of work yet to do before
    this can be qualified and supported. Stay tuned.
    -- richard

  • I need to download Oracle 8i Release 2 (8.1.6) for Solaris (Intel)

    I need to download Oracle 8i Release 2 (8.1.6) for Solaris (Intel) but haven't found it in the web page.
    Does someone knows where to get it.
    Thanks.

    This download is not available on the OTN site. We recommend that if you live within the United States or Canada to check with the Oracle Store for product availability:http://otn.oracle.com/software/store/discount.html
    Best Regards, OTN Team

  • Oracle 8i for solaris(intel based machine) software download

    hi sir,
    i wnat oracle 8i software on intel(solaris) platform, i am not abel to find out in oraclr site, plz give me replay , where can i get
    regds
    jani
    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name
    - Filename
    - Date/Time
    - Browser + Version
    - O/S + Version
    - Error Msg

    This is what you have available in OTN.
    Oracle8i Enterprise Edition Downloads
    Note: Oracle9i, Oracle's newest database, can be downloaded here.
    Linux
    Oracle8i Enterprise Edition Release 3 (8.1.7.0.1) for Linux (Intel), with OPS
    Windows
    Oracle8i Enterprise/Standard Edition Release 3 (8.1.7) for Windows 2000/NT
    Solaris
    Oracle8i Enterprise Edition Release 3 (8.1.7) for Sun SPARC Solaris (64 and 32 bit)
    UNIX
    Oracle8i Enterprise Edition Release 3 (8.1.7) for AIX-Based systems (64 and 32 bit)
    Oracle8i Enterprise Edition (64-bit) Release 3 (8.1.7) for HP 9000 Series HP-UX
    Oracle8i Enterprise Edition Release 3 (8.1.7) for Compaq Tru64 UNIX
    http://otn.oracle.com/software/products/oracle8i/index.html
    Joel Pérez

  • SIS 6326 driver for Solaris Intel platform

    Apparently those who used a SiS 6326 chip on the graphics card
    cannot find a proper driver for Solaris 8 Intel.
    I am having the same problem, is there any way of resolve this problem
    so I can make my graphics card work at 100% or does this mean I have to get a different graphics card which is supported by Solaris 8 Intel.

    Do you know if there is any other old SiS drivers for Sun? Maybe we can make it work good (at least 50% fine) using an old driver...
    PS: If you can, please answer to my email: [email protected]
    Thanks in advance...

  • Oracle 8i/9i for Solaris Intel

    Where can I download Oracle 8i or Oracle 9i for Solaris X86 (Intel) ?

    The last version of Oracle for Solaris X86 was Oracle 8.1.7...

  • Availability for Solaris Intel or MacOS X Intel?

    if there is , how stable it is to run this software over a compatibility layer on top of these OSs ?

    This is what you have available in OTN.
    Oracle8i Enterprise Edition Downloads
    Note: Oracle9i, Oracle's newest database, can be downloaded here.
    Linux
    Oracle8i Enterprise Edition Release 3 (8.1.7.0.1) for Linux (Intel), with OPS
    Windows
    Oracle8i Enterprise/Standard Edition Release 3 (8.1.7) for Windows 2000/NT
    Solaris
    Oracle8i Enterprise Edition Release 3 (8.1.7) for Sun SPARC Solaris (64 and 32 bit)
    UNIX
    Oracle8i Enterprise Edition Release 3 (8.1.7) for AIX-Based systems (64 and 32 bit)
    Oracle8i Enterprise Edition (64-bit) Release 3 (8.1.7) for HP 9000 Series HP-UX
    Oracle8i Enterprise Edition Release 3 (8.1.7) for Compaq Tru64 UNIX
    http://otn.oracle.com/software/products/oracle8i/index.html
    Joel Pérez

  • Adding 3COM 3C905C-TX for Solaris Intel

    Hi there,
    I am trying to add a 3COM 3C905C-TX card for Solaris 8/Intel.
    Since it's a PCI card, do i have to specify the irq, address etc
    in /platform/../elx.conf, if yes how and where do i get this
    info from? i followed the other procedures in the sun doc link
    provided several threads ago but ifconfig is still not recognizing
    the interface. how do i know for sure if the NIC itself is installed
    or not? any insights would be greatly appreciated!!!
    vinny.

    First you should probably install the latest solaris 8 elxl driver patch 109867-03 / 109866-XX because this patch adds support for the 3C905C cards.
    See the "Patches" link on the
    Solaris Driver Download page.
    (People have also reported that the 3C905C card works without the
    patch, but you have to
    add entries to certain system files).
    PCI cards are self-identifying, so there's not need to add irq's
    dma channels or I/O ports to
    a driver conf file.
    Make sure you perform a reconfiguration boot (either by
    specifying option "-r" on the boot command line or by a
    "touch /reconfigure" before you reboot solaris).
    The command "ifconfig elxl0 plumb" should add an interface
    for the 3com network card, afterwards you can use
    "ifconfig elxl0 inet 12.34.56.78", ... to configure ip addresses, etc.
    If this all works OK, create a new file "/etc/hostname.elxl0" and
    insert a single line with the IP-address for the 3com interface
    into that file.

  • Plugin for Solaris (Intel)

    Hi,
    is there or will there be a WLS 6.1 plug-in for Apache running on Solaris
    for Intel?
    Martin

    HW of the live systems are 100% Sparc.
    But for our development HW we decided, that Intel is good enough for the web
    servers. We want to have it close to the live environment and we have a few
    Intel boxes standing around, so why not use them?
    Application servers in development also Sparc based.
    We would like not to go for Linux or other stuff because otherwise we had an
    additional OS.
    I just have the feeling if I ask my salesperson, (s)he will tell me not
    supported as you can see at:
    http://www.bea.com/products/weblogic/integration/supported_platforms.shtml
    Otherwise I think it can't be so difficult to compile the plug-in for Apache
    not only on the Sparc plattform but also on Solaris(x86).
    Martin
    "Cameron Purdy" <[email protected]> schrieb im Newsbeitrag
    news:3c6b25d2$[email protected]..
    I suggest that you contact your salesperson directly to request this.
    Support for SunOS/x86 is typically poor if existent, including from Sun.
    Peace,
    Cameron Purdy
    Tangosol, Inc.
    Clustering Weblogic? You're either using Coherence, or you should be!
    Download a Tangosol Coherence eval today at http://www.tangosol.com/
    "Martin Haberstroh" <[email protected]> wrote in message
    news:[email protected]..
    Hi,
    is there or will there be a WLS 6.1 plug-in for Apache running on
    Solaris
    for Intel?
    Martin

  • 4 disk setup for PPRO cs6 please

    hello,
    can any users throw out advice as to where to put scratch disk, media cache/files, previews, final renders for PPRO cs6
    using 4 sataII 7200 drives please...
    c: 1) os win7 // cs6 programs
    d: 2) final renders //  
    e: 3) media cache // previews  //  encore ISO  //
    f: 4) footage/ PPRO_projects  // encore projects
    (the encore projects and iso are where they are at because writing the iso E: needs the final render D:  (2 separate hdd) (and no longer needs the 'footage' on F:)
    working with avchd 1920x1080 canon hfs20 footage
    http://help.adobe.com/en_US/premierepro/cs/using/WS9FAF538A-BEE3-4925-B45A-DF8BE7F2A2E5.ht ml
    Premiere Pro saves conformed audio in CFA audio preview files. You can determine where to save these audio preview files by specifying a Scratch Disk location for Audio Previews in the Project Settings dialog box.
    yet, i find the cfa files in the media cache files folder...
    thanks in advance, j

    Here's what I'd do.
    C: OS/Programs
    D: Projects/Cache/Scratch
    E: Media
    F: Exports/Images

  • Communication and Mob. availability for Solaris Intel or MacOS X Intel?

    if there is , how stable it is to run this software over a compatibility layer on top of these OSs ?

    I successfully connected an Intel Xserve to an EMC Clariion X600 array this past summer for testing purposes. Just make sure you get the UUID of the SAN from the System Admin of the SAN array. Similarly you'll have to give the SAN admin the UUID for your Fibre Channel interface. The UUID is like an Ethernet MAC address and allows you to see the SAN array over the Fibre Channel connection. We also had to get an SFP adapter for our Fibre Channel card as our SAN switch was all fiber optic connections.
    Once we configured both ends of the Fibre Channel and the System Admin had allocated a 100GB slice to my UUID, I initially couldn't see the SAN. After about a day of delays and double-checking the SAN admin rebooted the SAN, I rebooted the Xserve and the 100GB slice magically showed up in Disk Utility as unformatted storage directly attached to the machine. I don't know if there's any trick to configuring the Clariion box. I know they made no adjustments or changes to get the Mac to work on the SAN side. The system admin of the SAN kept saying, "We've never done this before,... You have to install the drivers for the SAN,... what interface is the Mac using?...Who manufactures it?...Do they provide any drivers whatsoever for the Mac?...
    Also our on-campus Mac re-seller directed me to alienRAID.org
    http://alienraid.org/
    There's some entries there on hooking Apple Fibre Channel to Clariion hardware:
    http://alienraid.org/article.php?story=macosxemcsupport

  • Sun cluster for solaris (intel platform)

    I wonder whether sun cluster will support oracle rac under intel platform?

    I believe this is the plan. However, there is a bunch of work yet to do before
    this can be qualified and supported. Stay tuned.
    -- richard

  • Neo 875 Bios setup for RAID - HELP PLEASE

    Have tried just about everything. I am unable to access the DISK ARRAY BIOS setup. Any ideas???

    Quote
    Originally posted by Flyboy747
    Have tried just about everything. I am unable to access the DISK ARRAY BIOS setup. Any ideas???
    hi
    have you enabled the RAID chip in your BIOS?
    good luck

Maybe you are looking for

  • IOS 7 on iPhone 5 classic -- Battery Issues?

    I might as well start this since somebody inevitably will. I am niticing in the first hours after updating to iOS 7 that the battery seems to be draining faster than normal.  However I don't want to start a panic, because somebody says this about eve

  • How to restrict a table with its set of data based on a column value in it?

    Hi, I have a scenario in which I have to show a set of data of a pivot table by restricting data based on a column value. I am creating BIP report whose source is from BIA ie.RPD. Based on a column value I want to restrict the data being displayed in

  • Error code 2908

    while i was trying to upgrade my itunes to the 7.3 version it will not install and gives me error code 2908 unable to install can anybody help me

  • Can't add to library "the streaming server cannot accept

    Had trouble w/ library; uninstall - reinstall Apple for WinXP x86... kep getting this Error message when trying to import Library from a Folder: c:\seagate FreeAgent\Jukebox Upon initiate... the screen blips to the Internet Music 'genre' and immediat

  • Sporadic outgoing .mac mail

    Several times a week my outgoing mail via .mac or .me (doesn't seem to make a difference which I use) fails to send. I get a message that it failed for one reason or another, and usually I just switch to another address with my local ISP or comcast.n