PPPoE internet on Parallels
G'day Chaps,
Have just changed my internet connection from a wireless one to using PPPoE. The internet on my Mac is working fine, but now I cannot connect using Parallels Windows XP. It worked fine previously, and I don't remember having to make any setting changes at all (although my memory may have failed me).
So I have all of the settings that I am using on my Mac PPPoE, how do I plug that in to windows on Parallels to make it work?
Many thanks,
damo.
turned out just to be an internet preference setting in Windows.
thanks for all your replies (ummm)
Similar Messages
-
Windows 7 no internet in Parallels
Hello,
I have installed Widows 7 Pro in Parallels 7 on my late 2012 Mac Mini (Quad Core Ivy bridge, 16Gb Ram, Intel 4000 Graphics). Everything is working fine except for network/internet. Parallels/Windows is not finding a driver for the Mini's network card. I was wondering if anyone else had has this problem or knows how to correct it.
Thanks,
HanHave you installed Boot Camp drivers? You need them to make your Internet connection work on Windows.
To download them:
1. Press X key while your Mac is starting to start into OS X, and open Boot Camp Assistant.
2. Select the option to download the Windows support software, and follow the steps to burn them into a DVD or USB drive.
3. Start into Windows and install drivers -
When will iPhone support PPPoE internet connections?
When will iPhone support PPPoE internet connections? Numerous Internet providers still use PPPoE internet over DHCP data. However, iphone does not support PPPoE.
PPPoE is irrelevant to the iPhone; it is a protocol between the ISP and the first point of presence on premises, which today is almost always a wired or wireless router. PPPoE would only be meaningful if there was a way to connect the phone directly to the incoming Internet connection. As there is no way to do this physically it would be pointless.
-
No Internet with Parallels (using Vista)
Just got Parallels and Installed Windows Vista. For some reason I can't get on the internet. Under device manager networking isn't even an option. I can't turn on network discovery, and because of all of this I can't get on the internet with windows to get necessary software and rives. Using the Mac side everything is kosher and i can surf the web. Any advice so I can surf the web with parallels?
http://forum.parallels.com/
-
Pppoe internet setup probs via ADSL
Hi I'm using Solaris 9 on X86 system with a NIC 3com 3C509C-TX-M.
I used the direction for pppoe setup from http://home.earthlink.net/~jaymzh666/solaris/spppoe.html
and it all seemed to do as per there instructions.
I'm able to get connected as shown on my file below taken from my terminal window: and showing my Point to Point is UP.
# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
# ifconfig elxo0 up
ifconfig: setifflags: SIOCGLIFFLAGS: elxo0: no such interface
# /usr/bin/pppd call MyBigpond
# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
sppp0: flags=10008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4> mtu 1492 index 2
inet 144.137.194.1 --> 172.31.28.24 netmask ffff0000
ether 0:0:0:0:0:0
# ifconfig elxl0 plumb
# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
sppp0: flags=10008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4> mtu 1492 index 2
inet 144.137.194.1 --> 172.31.28.24 netmask ffff0000
ether 0:0:0:0:0:0
elxl0: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 0.0.0.0 netmask 0
ether 0:4:75:da:34:72
# ifconfig elxl0 up
# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
sppp0: flags=10008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4> mtu 1492 index 2
inet 144.137.194.1 --> 172.31.28.24 netmask ffff0000
ether 0:0:0:0:0:0
elxl0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 0.0.0.0 netmask ff000000
ether 0:4:75:da:34:72
# ping www.sun.com
ping: unknown host www.sun.com
I end up with a dynamic IP of 144.137.194.1 in the particular session.
My problem is where to go to from here when I try to ping to check the connection I get "unknown host" So I'm a little lost. I can see that the connection has been made and my ISP has allocated an IP address. I've tried to use netscape and keeps telling it cant find any url's.
So I'm pretty sure I've missed a step somewhere. Anyone have any ideas of what I need to do to actually be able to surf the net or test the connection.
Thanks ShaneHi Lee,
Well checked the file and it's there and still can't connect to internet or ping even thought the connection is made and all NIC and PPPOE are up:
# /etc/nsswitch.files:
# An example file that could be copied over to /etc/nsswitch.conf; it
# does not use any naming service.
# "hosts:" and "services:" in this file are used only if the
# /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports.
passwd: files
group: files
hosts: files dns
ipnodes: files
networks: files
protocols: files
rpc: files
ethers: files
netmasks: files
bootparams: files
publickey: files
# At present there isn't a 'files' backend for netgroup; the system will
# figure it out pretty quickly, and won't use netgroups at all.
netgroup: files
automount: files
aliases: files
services: files
sendmailvars: files
printers: user files
auth_attr: files
prof_attr: files
project: files
and doing an ifconfig I get this
ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
# ifconfig elxl0 plumb
# ifconfig elxl0 up
# /usr/bin/pppd call MyBigpond
# Apr 25 12:06:48 Home sendmail[264]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
Apr 25 12:06:48 Home sendmail[263]: [ID 702911 mail.alert] unable to qualify my own domain name (localhost) -- using short name
# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
elxl0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 0.0.0.0 netmask ff000000
ether 0:4:75:da:34:72
sppp0: flags=10008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4> mtu 1492 index 3
inet 144.137.199.22 --> 172.31.28.24 netmask ffff0000
ether 0:0:0:0:0:0
# ping www.sun.com
ping: unknown host www.sun.com
# netstat -i
Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
lo0 8232 loopback localhost 450 0 450 0 0 0
elxl0 1500 0.0.0.0 0.0.0.0 57 0 58 0 0 0
sppp0 1492 172.31.28.24 144.137.199.22 55 0 56 0 0 0
So I'm not sure what I'm doing wrong all connections are up and dynamic IP is allocated. Any ideas on whats wrong ??
Shane -
Strange PPPOE internet behavior
I recently set up a 2611 router to initiate my PPPOE connection to ATT
DSL. I was able to get the PPPOE to connect and everything seemed to
be working how ever after a few days I started to notice that certain
websites were not coming up. My setup consistes of a 2611 router that
is connecting to the internet, internally this router connects to a
2621 router on a 10.1.2.X network which is also acting as a router on
a stick for vlans that i have setup on a 2924 switch in a 192.168.X.X
network. The problem did not seem to be VLAN specific as at least one
PC on each VLAN could get to the sites that were having issues. The
sites that I noticed that were having issues were Windows Update
(would display a "no network connection" error after searching for
updates), Craigs list ( would go to a page can not be displayed when
trying to post adds) Yahoo groups ( could sign on to groups but once
signed on all links would go to a page can not be displayed error)
Credit card sites ( could sign in but all links once signed in would
go to page can not be displayed). I tried troubleshooting this on the
Windows end first by engaging Microsoft support, but we were able to
determine that there was an issue with the network as once I replaced
the 2611 with the linksys that I was using previously everything
worked. Before taking the 2611 down I was able to do a packet sniff
with Ethereal of a succesfull and failed windows update, the only
glaring issue that i saw was that on the failed windows update I was
getting alot of check sum errors which after researching looked like
they were coming from the Gig NIC. Below is the config that I was
using on the 2611, any insite or thoughts on this strange issue would
be appriciated.
2611 Config
=========================
Using 3078 out of 29688 bytes
version 12.3
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname crossbonesEdge
boot-start-marker
boot-end-marker
no aaa new-model
ip subnet-zero
no ip source-route
no ip domain lookup
no ip bootp server
ip cef
vpdn enable
vpdn-group 1
request-dialin
protocol pppoe
interface Ethernet0/0
description Connection to Internet
no ip address
no ip redirects
no ip unreachables
full-duplex
pppoe enable
pppoe-client dial-pool-number 1
interface Ethernet0/1
description Connection to Crossbones
ip address 10.1.2.253 255.255.255.0
no ip redirects
no ip unreachables
ip nat inside
full-duplex
interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname [email protected]
ppp chap password 7 XXXXXXXXXX
ppp pap sent-username [email protected] password 7 XXXXXXXXX
router eigrp 100
network 10.1.2.0 0.0.0.255
auto-summary
ip nat inside source list 1 interface Dialer1 overload
ip nat inside source static tcp 192.168.7.10 1495 interface Dialer1
1495
ip nat inside source static tcp 192.168.7.15 3389 interface Dialer1
3389
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
logging 192.168.7.16
access-list 1 permit 10.1.2.0 0.0.0.255
access-list 1 permit 192.168.0.0 0.0.255.255
dialer-list 1 protocol ip permit
no cdp run
snmp-server community public RO
line con 0
exec-timeout 15 0
password XXXXXXXXXXXX
logging synchronous
login
length 22
history size 30
line aux 0
exec-timeout 5 0
login
length 22
transport output none
line vty 0 4
exec-timeout 20 30
password XXXXXXXXXXXX
login
length 22
history size 30
endhi, on eth 0/1
ip tcp adjust-mss 1452
or
ip adjust-mss 1452
if you cannot enter any of the two option, upgrade ios. -
Please help! Internet on parallels and through airport, but not in OSX??
I have snow leopard on MBP. At one of my places at work, when I connect to the network - I cannot get internet to work inside OS X - i.e. mail, safari, firefox - all do not work. However, if I start up parallels - the firefox and other programs within XP parallels work perfectly. What's more, if I enable internet sharing through airport, I can also use my ipod touch to connect to the internet through my MBP!! Inside OSX - most things do not work most of the time, and on occasion, microsoft entourage works for a bit...
Looking at little snitch, looks like a lot of active "local" network activity by natd and MDNSResponder - nonstop.
The console is full of messages... one today in a non-stop loop was:
10-10-26 2:47:28 PM mDNSResponder[30] GenerateUnicastResponse: ERROR! Why no questions?Thanks for replying. I don't think I'm running other low level programs... hotspot shield in the background, but not up and running.... Also, this problem occurs at one of my offices, but not in my other office or at home. It seems so very strange, and I'm tearing my hair out. Resorting to either running parallels or checking my email on my ipod.
-
PC restarts after using PPPoE internet connection
Hi,
I've upgraded to Win 8.1 a few days back. Whereas everything else is working fine, I have started getting a problem when I try to connect to the internet through my PPPoE connection.
After being able to browse for a couple of minutes or so, suddenly the PC shows a message on a blue scree stating that an error has developed and the PC needs to restart. This happens every time I try to connect to the internet .
Please help me to solve this issue as soon as possible as I find it impossible to stay without the internet beyond a few days.
Thanks,
Sesh2000
IndiaHello,
I'd ask in the
Windows 8.1 forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Problems accessing internet through parallels desktop on Mac OS Leopard
I have recently installed parallels desktop on my Mac OS Leopard. I work for an organisation that requires us to use the Novell Services software, in order to access internet, shared folders Groupwise email etc.
The good news is that I have access to the server, hence the software works on the mac via windows XP, and I can use the Groupwise email. however, I cannot seem to access the internet using either firefox or explorer browsers. I have looked at the connections settings, security settings etc,. and no joy.
Has anyone had similar problems or suggest ideas on how i can solve the problem...
Its a nightmare having to use windows on the Mac, but its my only way so i can access the internet and email...
many thanks in advance for any suggestions.This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and completely unrelated to Parallels
You should really consider posting issues with Parallels on the Parallels forums as they would be focused more toward the issue than an Apple forum.
http://forums.parallels.com -
Internet OK w/ Parallels but not Boot Camp
Background:
Last week my WDS network consisting of 3 Airport Expresses (802.11g) got snarled up to the point I had to reset the entire system. Prior to this I was able to get Internet via Boot Camp, Fusion (on my Mac Pro), or Parallels (in my MacBook Pro).
*Current problem:*
After the network was restored I had to reenter my WEP password/code into all my machines. On my MacBook Pro, however, I cannot get Internet with Boot Camp. When I try to "repair," it times out and tells me it can't find the IP. (It has no problems "seeing" my network, it just won't get online).
However, when I use Windows via Parallels 2.5 (which uses this Boot Camp partition) I have no problem getting online. *The problem only exists when using Boot Camp on the MBP.* (I have no problems getting online via Fusion or Boot Camp on my Mac Pro either, just to eliminate my ISP, modem, and base stations).
But now that I've narrowed down the issue to just Boot Camp on my MBP I'm not sure how to proceed. I'm not much of a Windows troubleshooter. Any ideas how to get Internet back?Same general problem, but I'm using a Mac Pro that previously connected without a problem under BC.
For my case, I removed then reinstalled Vista to a larger partition. I can connect to the network, but not the internet. Parallels and OSX have no problem (though I have to select the connection in OSX after booting to Vista and back).
I'm using WPA+TKIP -
Internet Speed w/Parallels Virtualization
10.4.6 definately made internet speeds a bit more peppy and thought it was adequate until I used Parallels VM with Win XP. Internet Explorer within the VM is super fast, and I do mean SUPER. Hopefully Apple is still working on the issue even though the last update improved things a bit.
Same general problem, but I'm using a Mac Pro that previously connected without a problem under BC.
For my case, I removed then reinstalled Vista to a larger partition. I can connect to the network, but not the internet. Parallels and OSX have no problem (though I have to select the connection in OSX after booting to Vista and back).
I'm using WPA+TKIP -
When I try to connect to internet wirelessly (Parallels/Windows 7 on my Mac Pro) I get a drop down that says "Real Network adapter thunderbolt bridge used by virtual adapter 1 is not connected to the network". I can not figure out how to connect - any help is appreciated!
Since you are having trouble with Parallels or Windows, did you ask in their respective support forums? If not, you might want to consider doing so.
-
Error message pops up saying "Network Connection could not find a PPPoe Server.
I am trying to update my wife's iBook, 2,1 for my mom to use. It is running OS 10.6.8. Every time I wake up the computer an error message pops up saying "Network Connection could not find a PPPoe Server." It does it periodically when the computer is on. It will drive my mom nuts and worry her. Can anyone help me stop this from happening?
Thanks,
KCHello kevinfromwauwatosa,
Thanks for the question. The following article provides the most relevant information to your issue:
Troubleshooting "A connection failure has occurred", "The specified server could not be found" or similar messages
http://support.apple.com/kb/TS1843
For additional information see this resource:
Mac OS X: Troubleshooting a PPPoE Internet Connection
http://support.apple.com/kb/TS1871
Thanks,
Matt M. -
Browsers in OS X slow or not working while browsers running in Parallels are fine
From day one, I had massive problems using first Safari and then Chrome in OS X. I would have to refresh ten times or more to get to a webpage. I was advised to create a new user and see if the problem persisted and it didn't. Browsing was perfectly fine. But that does not solve the problem. I need to use the browsers in my user profile, not in one that has not got any of my applications in it. I did rebuild my user profile from scratch, which took a lot of time and I just ended up having the same problems.
Then I purchased Parallels and installed Chrome in there. And bizarrely, it's ok there. Still not as quick as I would expect, but useable.
Another peculiar thing is the choice or router: I bought a very fast Belkin router because initially, I just had a TalkTalk modem/router that came with the broadband. It is very slow and since it is downstairs, it never managed to transmit fully to my office. So, I connected the Belkin to the TalkTalk via Ethernet and was hoping that I would now get better and faster wifi. And that does work for my iPhone, iPad and PC but not for the iMac under OS X. If I go back to my TalkTalk wifi, it does work with the OS X browsers, but it is slow due to weak signal.
I know this is getting confusing, so here is an overview:
browser in OS X browsers in Windows 7 through Parallels
TalkTalk wifi works, but slow works, but slow
Belkin Wifi hardly works at all works and mostly very fast
Following from that, here are a number of statements that should be true:
1. It can't be hardware, since wifi works with the TalkTalk router and even with the Belkin through Windows 7
2. It can't be OS 10.7 in general, since it is working with the TalkTalk even though it does not with the Belkin
3. It can't be the Belkin in general, since the browsers are working through Windows 7
4. It can't be the positioning of either the routers or the iMac, since it works for both routers in certain configurations.
I can only assume that it is some setting in OS 10.7 that is in conflict with the Belkin router.
Now, I can obviously use the internet through Parallels or use the TalkTalk but that is not the point. I paid good money for both the iMac and the Belkin and I think I should be allowed to expect both to work with each other! Or shouldn't I?!?
Anyway, any suggestion would be gratefully received!Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
10.10.2 broke wifi in OS X (but not win8 in Parallels)
After upgrading from 10.10.1 to 10.10.2, my MacBook Pro connects to my Apple Extreme via Wifi, but not to the Internet. (On a side note, the Extreme also reports not having an Internet connection.)
However, other devices connected to the Extreme via Wifi, do access the Internet (they run Android, iOS and Windows 8). And on the same Mac that can't reach the Internet, I'm running Parallels Desktop with Windows 8 installed, and here I'm getting a good Internet connection (Parallels is running its network adapter in bridged mode, meaning it's visible to the Extreme as a separate machine).
So, despite the Extreme's odd status, the Internet is available to all my devices, but not Mac OS X. Also, the Mac's wifi hardware must be working, since it's good enough for Parallels on the very same machine.
What is it, then, that's causing OS X to not connect to the Internet?After Yosemite 10.10.2, the Wifi at work is so broken that I have to open a Terminal to ping 8.8.8.8 to see if I am still online.
My Terminal typically looks like:
64 bytes from 8.8.8.8: icmp_seq=2999 ttl=49 time=981.657 ms
64 bytes from 8.8.8.8: icmp_seq=3000 ttl=49 time=56.346 ms
Request timeout for icmp_seq 3011
Request timeout for icmp_seq 3012
Request timeout for icmp_seq 3013
Request timeout for icmp_seq 3014
Request timeout for icmp_seq 3015
Request timeout for icmp_seq 3016
ping: sendto: No route to host
Request timeout for icmp_seq 3017
ping: sendto: No route to host
Request timeout for icmp_seq 3018
ping: sendto: No route to host
Request timeout for icmp_seq 3019
ping: sendto: No route to host
Request timeout for icmp_seq 3020
ping: sendto: No route to host
Request timeout for icmp_seq 3021
ping: sendto: No route to host
Request timeout for icmp_seq 3022
ping: sendto: No route to host
Request timeout for icmp_seq 3023
ping: sendto: No route to host
Request timeout for icmp_seq 3024
ping: sendto: No route to host
Request timeout for icmp_seq 3025
ping: sendto: No route to host
Request timeout for icmp_seq 3026
Request timeout for icmp_seq 3027
Request timeout for icmp_seq 3028
Request timeout for icmp_seq 3029
Request timeout for icmp_seq 3030
Request timeout for icmp_seq 3031
Request timeout for icmp_seq 3032
Request timeout for icmp_seq 3033
after a while. Then I have to Turn Wifi Off, reconnect Wifi to get online again...
Maybe you are looking for
-
I'm using Mac OS X version 10.6.6. The message strongly recommends that I apply this update for Firefox as soon as possible but when I click Update Firefox, it seems to try and update but never really gets started.
-
I converted 8mm tapes using a digital8 camcorder but think the camcorder has issues, because I just picked up a 8mm camcorder and footage looks better, not noisy like on the d8, anyhow now I have a canon elura set up with pass through ready and an an
-
RC4 and JavaTM 2 SDK, Standard Edition , v1.4
Hello, I am new to Java Cryptography and wanted to find out if the new JavaTM 2 SDK, Standard Edition , v1.4 includes the 128 bit RC4 algorithm or do we need to download the RSA Security, Inc. JCE 1.2.1 compliant provider? Need information fast! Than
-
Removed app from D110, still printing
I removed the 7-day menu planner app from my Photosmart D110 over a month and a half ago, and it's still printing every week. It's not in my print apps menu, and I can't change the settings for it, because I removed it. When will it stop? It's wastin
-
HT201359 Accepting Terms and Conditions on a PC
I am attempting to buy music on Itunes on my PC. It keeps coming up with the terms and conditions. I click the box to accept, but there is no way to continue further and actually confirm my acceptance. Has anyone else had this problem?