PPR in Service Order

Hello,
does anybody have an idea, how to activate PPRs for Service Orders. I can customize them for Service Contracts, this is fine, but I also need them in Service Orders (which are not linked to a Service Contract). I checked the possibility of Product Proposal, but this doesn't seem to be a solution.
Best regards and thanks
Sabine

Hi Sabine,
PPR is generally used for PPRs Business Transactions and Applications flag activates the check for PPRs with the status Active in business transactions and when the API (Application Programming Interface) is called by other applications
for configuration you need to go to SPRO> Master Data>Partner Product Ranges-->Basic Settings.
Now define various ppr you need to use, assign them to the transaction type and various application where you wanted to access this.
Hope this will help you.
Regards
Arun Kumar
<b>Rewards Points if it helps</b>

Similar Messages

Contract determination in service order for PPR items

Hi Experts,
Contract data is not being determined for some items in service order. All these items are assigned to product list in service contract using product range or PPR.
1) PPR is created with the type "sales contract"
2) In the categories section assigned the relevant category ID's
3) PPR is assigned to the service contract under product list.
4) Service order is maintained for contract determination 'D' - determination both at header and item level
5) When a service order is created I see that expected items are not showing the contract data.
Any suggestions - any specific setting I am missing
I found a SAP note for same problem in previous versions of CRM. (5.0 to 5.1)
but we are on BBPCRM 6.0
Thank you
Ram

Hi Shalini
                i am trying to create a service ticket from WEB IC by confirming Account and Ibase and then creating service request and able to save without error.
            if i end session and open the service request again in change mode and if delete the ibase, then appeas the message
"You should run a new contract selection for item 0000000010", going through OSS notes, but found nothing.
           Contract Determination is set to 'E' : Assign at Item leve : Assign immediately if unique for transaction type ZXXX.
if i open the service ticket in CRMD_ORDER and go in change mode if i click process action button next to error, this will disappear. but it comes when i assing a ibase to the request, so its working only when i create.
any sort of help will be appreciated.
Thanks
Gopi

Creation of Sales Order from Service Order

Hi All,
I am usind BADI Workorder_update and method at_save to create a Sales Order while saving the Service Order.
I have created the ZBAPISALESORDER_CREATEFROMDAT2 which is a copy of BAPI_SALESORDER_CREATEFROMDAT2(Since order type was ZDR).
I have written the following stmt for Debt Memo.
            BUSINESS_OBJECT         = 'BUS2096'              " Debit Memo
This BAPI is working fine and giving the Sales Order Number as a pop-up for information.
But now, the problem is coming with Service Order Creation (In the transaction IW31). It is giving short dump while saving the service order after creating the sales order.
I have checked in the standard code of Service Order. Dump is coming at
Include : LCOZFU64
Function Module:CO_ZF_PROJECT_BUDGET_CHECK
Line : 258
IF caufvdg-netzkont IS INITIAL.
          CALL FUNCTION 'STATUS_CHECK'
            EXPORTING
              objnr             = caufvdg-objnr
              status            = stk_vkt
            EXCEPTIONS
              object_not_found = 01
              status_not_active = 02.
          subrc = sy-subrc.
        ELSE.
        ...ansonsten kann man das an NETZKONT erkennen!
          IF caufvdg-netzkont EQ con_kont_kopf.
            subrc = 02.                "kopfkontiert
          ELSE.
            subrc = 00.                "vorgangskontiert
          ENDIF.
        ENDIF.
With my code of BAPI, it is returning sy-subrc = 01 (Object not found).
Without my code of BAPI (Standard code of IW31), it is returning sy-subrc = 02 (status not active) which is the right one.
Kindly help me in this regard.
Regards,
Priyanka Vasudeva.

Hi,
There are various scenarios to support end to end work managmenet process in IS-U find attached detail document at link below.
[http://help.sap.com/saphelp_utilities472/helpdata/en/6a/1a6c35a018d041e10000009b38f839/frameset.htm]
Scenario A describes process of creating sales order based on service order.

Service order type creation

Hi,
I want to create a service order type. We dont have any requirement to create any service notification for it.
Could any one please tell me is it necessary to create a service notification before a service order.
Thanks and Regards

Hi
No there is no nedd to create service notification before order creation but in real time this logic will not apply before you have to craete the notification.
But if u want to just check this concept then u can eaisly create a order without creating notification
Thank & Regards

Auto creation of service orders from service plans using action management

Hi,
We are using service plan products in service contracts where in serviceorders are created according to the plans for the duration of the contracts according to the defined frequency.
The processing for the action is set as "Immediate processing" so that the order is created the moment the deadline is reached. The order is created using the method "CREATE_ORDER_SRVPLAN".
The contract is created and released and with all the line items (including the service plan line items). The schedule condition is such that => all the orders due in a particular month are created on the first of that month. e.g. plan orders for 15.01.2009, 30.01.2009, etc (i.e.,all the orders due in Jan 2008) will be created on the 01st of Jan 2008.
As per this definition, the relevant actions get scheduled, BUT DO NOT GET EXECUTED. The moment I just go to the edit mode in the document and save (without making any changes) the action gets executed and the service order gets created.
The requirement is that the moment the deadline is reached the action should get executed and there should be no need to edit the contract since the processing is kept as immediate.
Please advice further.
Warm regards,
DP

Hi Cenk/Pepe,
Thanks a lot for the response.
I did schedule the report and it gets executed as per the schedule. But it does not execute the actions. As a output it just logs "3 actions selected". What I want is that it should actually go ahead and execute these actions and not just select them.
Kindly advice on the same.
Regards,
DP

Automatic Creation of Service Order

Hi
What config settings do I need to maintain in order for servce orders to be generated automatically during the creation of disconnection documents.
I have created service objects in Work Management, but the service orders are not created.
Thanks

Hope you have mentioned the order type while maintaining the Service Object in OISC.
Regards,
Rajini.

Transaction type not found while creation of service order/ticket

Dear All,
I had done all basic configuration of CIC but i am not able to create service order and service ticket.
When i trying to create i am not able to find any transaction type but if i want to create follow-up document from CIC screen then i am able to create both the thing. I am not able to find out where is the problem. can any body help me out.
Thanks & regards
Neeraj

Hi Francis,
Thanks
I am on Interaction Center WebClient 2007.
I have already done the configuration and Transaction type is popping up for selection screen but once i select the transaction type then system automatically canceled the transaction "Transaction Cancelled"
But in the same time if i am trying to created follow-up transaction with reference to previous transaction then i am able to created service ticket/service order.
what could be the problem?
Regards
Neeraj

Creation of service order from campaign element

Hi,
We have a requirement where service orders are to be created for all those business partners who responded to the campaign. We are using standard service order type SVRO. We have set up campaign automation by creating campaign and element, assigned target group, set decision point (rule & condition) to split target group in two; one for those who have replied to campaign and others who have not replied. These target groups are also linked to other campaign elements within the campaign.
The question is, how to create a follow-on transactions such as service orders through campaign, so that one service order gets created for each successful BP from campaign result?
Thanks in advance for your advice / suggestions.
Regards
Umesh
Edited by: Umesh Singh on Sep 30, 2009 6:36 PM

Hi Shatnhala,
Thank you for your help. I'll try this and will come back to you.
My further requirenment is to re-trigger pricing to upade latest price information on these service orders and then to create and send letter to all those customer with price informations. Can I use the same workflow with different steps to complete all these task?
Also, how will these service orders (created through workflow) be linked with the campaign? Is their a way to link one campaign with many orders?
Thanks
Umesh

Service order creation using bapi with repair order number

Hi experts,
Pls suggest me a BAPI to create a service order for those repair orders where a PGR has been done(for return delivery type : LR).
The plant should be 0260 with storage location wh01 and item category ZRRE
Creation of a service order with repair order type SM03 is not allowed in iw31.
thanks and regards,
Vijayb.

Hi prakash,
Thank u for the BAPI
But an error is being displayed saying that the REFURBISHMENT ORDERS CANNOT BE PROCESSED USING BAPI.
ERROR DURING PROCESSING OF BAPI METHODS.
This is while u pass the order type as either ZM03 or SM01or SM02 or SM03.
pls help me on that.
thanks and regards,
Vijayb.

How to get CRM service order data in R/3

Hi,
I want to retrieve service order data from CRM system to R/3, is there any FM for this. Please help as i am new to CRM
Thanks
Bobby

Hi Bobby,
It is very much possible to upload CRM service orders to SAP R/3 or SAP ECC via standard CRM middleware.
Please refer to the below SAP help document for complete list of configuration activities for service order upload.
http://help.sap.com/saphelp_crm50/helpdata/en/f0/5d583c65399965e10000000a114084/frameset.htm
<b>Do not forget to reward if it helps</b>
Regards,
Paul Kondaveeti

Warranty tab not getting displayed in service order

DEAR ALL,
I have an issue with crm services, I HAVE NOT ACTIVATED/USED INSTALL BASE IN MY SCENARIO AND HAVE CREATED PRODUCTS DIRECTLY/ DOWNLOADING FROM R/3.
NOW WHEN I MAKE A SERVICE ORDER THEN WHEN I ENTER THE PRODUCT (EG: FINISHGED GOOD) ITEM CATEGORY BEING YANN (TEXT ITEM CREATED BY US) THEN THE WARRANTY TAB IS NOT COMING UP.
when we add an expense item in the next line item warranty tab is getting displayed.
KINDLY HELP.
REGARDS,
AMIT

Hi for this u can use VCT but you to check for doc flow action settings and work flow before, then only you will get Guranty Data tab hope this will helpful
Regards
Venkat

Crm service order related fields updation

hi ,
i am creating a sales order using va01 transaction. service order is automatically created with the config settings . during this, some of the fields in service order in R/3 are not updated. i wnt to populate 6 fields in service order when creating sales order .
i hv got user exit to update 4 fields, but for operations tab in service order, i need to populated activity type and work ( quantity fields ), these fields are not availbale in the above user exit.
Can any one pls suggest me how to update the operations tab fields in service order .
Reg
Shiva

hi ,
i am creating a sales order using va01 transaction. service order is automatically created with the config settings . during this, some of the fields in service order in R/3 are not updated. i wnt to populate 6 fields in service order when creating sales order .
i hv got user exit to update 4 fields, but for operations tab in service order, i need to populated activity type and work ( quantity fields ), these fields are not availbale in the above user exit.
Can any one pls suggest me how to update the operations tab fields in service order .
Reg
Shiva

Report for Material Issued against Service Orders But not Billed.

Hi Experts,
For CRM Service Orders Based on the Reservation number generated in CRM we will make the Goods issue document in ECC.
My Question In CRM Do we have any standard report to see Material issued against CRM Service orders but not billed. i.e. Work in progress.
Thanks in Advance,
Abhinesh

Hi Vivek,
What I wanted to say that you won't get information from VAV about billing since as far as I know it doesn't contain any relevant table.
You should try create a query using LIKP-LIPS-(joint type: left outer)-VBRK. This will connect deliveries to billing document, you can also get SO number. Please try this.
(Sorrowully I don't know which logical database would be good for you)
BR
Csaba

How to get system status and user status of service order

Hi,
I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
Regards,
Kamesh Bathla

Hi,
Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
Regards
Srinu

Travel Expenses settlements against Service Order/WBS Element/Project Ord

Hi Experts,
I have one req. in Travel Expenses, i.e. need to settle travel expneses against Service Order/WBS Element/Project Order.
Can you guide me how to do this req.
Thanks & Regards
Rajesh

Hye mate,
This is possible for sure what you need to do is to go at travel request . In travel Request there is an option of Enhanced Travel cost/ Alternative master cost center. if you click on it . you would find an option of cost assignmnet click on it
there you would have option , like an excel sheet like fields of the cost centre, wbs element, profit center, order number what eve is requred and save it.
now the cot of trip would go that particulat cost center or der numbe or WBS rather then the cost center assigned at master data in ifototype 0027.
Regards
Waqas Anwar

PPR in Service Order

Similar Messages

Maybe you are looking for