PPR(Partner Product Range) Type for Product Catalog Views

Hi all,
I need to prevent showing some products in E-commerce Catalog depending on the PPR settings. Does the PPR type for Catalog Views help me? can any one explain me what is significance of drop-down "Application" in the PPR type configuration.
thanks in advance
Regards, DD

Hi Mohanthy,
We are using PPR ( CRM Listings in Filtering products from ISA ). There is no standard way to make the products not displayed in catalog based on listing. We call a Z function module to after the user login to the Ecommerce Application and get the allowed products list and then use that to filter-out the products from the catalog page. ( This might not be a gr8 approach but .. this is exactly your requirement, and also we don't have a huge catalog so listing data in session is small for us.)
Hope this gives you a idea.
regards,
Yoshi

Similar Messages

Movement type for production supply missing in warehouse

Gurus,
I am getting this error when i use TC-LP11
movement type for production supply missing in warehouse
What should be done?

All I can suggest is checking the master data:
Must have at least one Prod. Supply Area and one control cycle set up.
PSAs are part of the WM-PP interface and are created in WM and are used to group together Work Centres (which are Production master data).
Created under application menu:
Logistics/LE/Master data/Warehouse/Production Supply (Tx LPK1/2/3 see also LS41) and assigned to Work Centres under application menu:
Logistics/Production/Master data/Work centres/Work centre/Change (Basic data view).
(To find out the PSA aka Supply Area from Process Order Display Tx select: Goto \ List \ WM Picklist and scroll to right)
A Control Cycle defines for a given material, Plant and PSA:
which WHS to get the material from
which interim storage type to take it to
which bin to place it in (can be dynamic for pick parts)
Logistics/LE/WM
Master data/Control cycle record/Create
Regards,
Nick

Production scheduling profile for production order type 10 does not exist – SAP Message No.10085

When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
How to check whether production scheduling profile is maintained for relevant order type 10.
To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
Also, pls explain about “Order Type 10” and how it is linked with material and order execution.
Looking for a detailed explanation with screen shots , since i am new to SAP.
Thanks With Regards,
Dinesh Kumar V.

Hello Dinesh,
Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
Production order have Order category as 10 Process Order 40 in standard SAP you can check this in OPJH.
Best Regards,
R.Brahmankar

Production scheduling profile for production order type 10 does not exist

Kindly suggest me how to resolve this error
Production scheduling profile for production order type 10 does not exist

Hi Archana,
Go to material master-work scheduling view and check what is the production scheduling profile maintained for the same materisl -plant combination.
then go to OPKP and check if production scheduliong profile is maintained for relevent order type 10 in custmizing. If not maintain one and it should resolve the error.

Output type for production order

Hi, when we save the production order, we wants to transfer the prod order header details in legacy system thru idocs. Trying to define output type for production orders in NACE t-code, could not find production order option there. Pls advise in this case how to define the output type for production order so that the header data will be taken by idoc and transfered to legacy. Pls advise.

Hi,
production orders don't have output types like SD orders.
But they have status control and events. Look into the object type BUS2005 in transaction SWO1. There you find the events which are fired by SAP, eg. ProductionOrder.Released.
Which Idoc type do you want to use?
I think you have to programm your own method for the Idoc creation. Put it into a workflow task and assign it to the event.
Regards
Michael

Number range Object for Production order Number range profile.

Hi ffriends,
 Can anybody tell me how to maintain the Serial Number Range for production order serial no.
 I working on automatic serail no generation for production order.I have one serial no range profile which I am assigning to material in material master but I don't know the number range object for that profile.
 Or can anybody tell me how we attach serail no profile to a serial no range object.?
 Please it is urgently required..........
Regards,
Rajesh Akarte

hi rajesh
in the serial number profile there are certain business procedures which will create the serial no ,kindly check whether for your procedure you have assinged whether serial number to be arranged or not
slecect the serial number profile in sutomization field( which you have specified in Material master) and select the serialization procedure and check whether the PPRL procedure is assinged,also check the serial no usage assigned
for detailed process have a look here
http://help.sap.com/saphelp_47x200/helpdata/en/3c/abc38a413911d1893d0000e8323c4f/frameset.htm
regards
thyagarajan

Abolish product cost collector for production order

Dear Experts,
we use for some production order types the product cost collector. Now we plan to abolish them and change the settlement for production order. Which things do we have to pay attention? Do we have to finish our running production orders first or is it possible to change customizing during running production process. Thanks for your hepl!
Best regards
Steffen

Hi Ajay,
thank you for your answer.
We have tested two variants:
1. new order type, so we can process two separate settlements, for orders with PCC and the new orders without PCC. After archiving of all prodorders with pcc, archiving of pcc it should be possible to switch back to old order type.
2. change customizing without finishing existing orders, settlement for existing orders, all orders which already have been processed will be settled by pcc (status pcc usage in order header) We have not be seen any strange system behavior.
We use the pcc collector for different order types in different plants and want to abolish plant by plant. In this time the pcc will still be customized/exists.
Best regards
Steffen

Sender object type for price catalog in Generation of BizPackage

what is sender object type for price catalog in Generation of BizPackage and BIU under bizPackage Generate (SAP B1iSN Tools)
i should put PRICAT (the msgtype in the model view or PRICAT02 in standard basic IDoc types)
Thanks
elson

If i correctly understood your problem, i think you have to manage (in your trasformation) the section between <Items_Prices> and </Items_Prices>.
<?xml version="1.0" encoding="utf-8" ?>
<BOM xmlns:bfa="urn:com.sap.b1i.bizprocessor:bizatoms">
<BO>
 <AdmInfo>
 <Object>4</Object>
 <Version>2</Version>
 </AdmInfo>
 <Items>
 <row>
 <ItemCode>AAAAAA</ItemCode>
 <ItemName>BBBBBBBBB</ItemName>
 </row>
 </Items>
 <Items_Prices>
 <row>
 <PriceList>1</PriceList>
 <Price>27.400000</Price>
 <Currency>EUR</Currency>
 </row>
 <row>
 <PriceList>2</PriceList>
 <Price>0.000000</Price>
 <Currency>USD</Currency>
 </row>
 </Items_Prices>
 <ItemWarehouseInfo>
 <row>
 </row>
 </ItemWarehouseInfo>
 <ItemPreferredVendors>
 </ItemPreferredVendors>
</BO>
</BOM>
BR

Problem Posting Receipt From Production and Issue for Production

Hi Everyone,
I am posting Receipt from Production and Issue for Production through DIAPI in SAP Business One 2007A SP00 PL03.
I am using following lines of code
oDocument.Lines.SetCurrentLine(0);
oDocument.Lines.BaseEntry = int.Parse(BaseEntry);
oDocument.Lines.Quantity = double.Parse(Quantity);
lRetCode = oDocument.Add();
The Document adds perfectly but when I open the document in SAP Business One i am not able to see the Order Number at Line level on which this document was Based.
I identified the problem being Order Number Column being binded to BaseRef field hence form is not able to Show the Order Number and we cannot set BaseRef via DIAPI since the property to set that field is not exposed.
I donot want to update the table through a Recordset Update Query. I would appreciate if the property to set that field is exposed by SAP or any other workaround can be put forward by anyone who has faced the same problem.
Thanks
Kapil

Do you need to set
oDocument.Lines.BaseType = 17 (if this is sales order)
and then baseentry = baseentry....etc
If you bind the base entry correctly it should alwasy shows the base document on both database as well as front end. I have never had any problem with this
Sincerely

Document types for Entry view Vs document type for General Ledger view

Dear experts...
Can you explain what is the deference between Document types for Entry view and document type for General Ledger view?
Dasu

Hi,
Document Types for Entry View
In this activity, you define your document types. Document types are used to differentiate the business transactions and to manage how document are stored.
Document Types for General Ledger View
You define for non-leading ledgers the document types for the documents in the General Ledger view. At the same time, you assign for each document type a number range to be applied in the     assignment of document numbers:
    o   You do not need to make these settings for your leading ledger
        because, in the case of this ledger, the document number in the
        entry view always corresponds to the document number in the general
        ledger view.
    o   You only have to make these settings for any non-leading ledgers
        that have a fiscal year variant that differs in at least one company
        code from the fiscal year variant of the leading ledger in this
        company code. In this case, the document number in the entry view
        does not correspond to the document number in the general ledger
        view and you have to define a separate document type with document
        number assignment for the general ledger view.
        For all non-leading ledgers that, in the company code to which the
        postings are made, have a fiscal year variant corresponding to the
        fiscal year variant of the leading ledger in this company code, the
        document number in the entry view always corresponds to the document
        number in the general ledger view.
        Note
        The need to define a document type for documents in the general
        ledger view depends only on whether the fiscal year variant of the
        non-leading ledger in the company code (to which the postings are
        made) differs from the fiscal year variant of the leading ledger in
        this company code.
Regards,
Kiran

Custom Set Types for Products

Hello,
We have added some Z set types for our CRM Products and have created two Z tables for this. But even though we update these tables, we are not able to get the values for product on the screen.
Can someone tell me what all tables should be updated when we have cutsom Set Types in use?
Rgds
Priyanka

Hi Priyanka,
I Guess you want the Values in the Ztable as F4 help values for the Z attributes in Z set types of the product.
To do the same plz follow the steps mentioned below:
1) Identify the field(Attribute in Set type) for which you want the F4 help.
2) Go to SE11. Select Data Type and enter the name of the Attribute value.
3) Press Change
4) Doble click on the Domain to go to the domain element associated to it.
5) In domain element screen, go to Value Range Tab.
6) In Value Range Tab, you have a Value Table field, Enter the ZTable from which you want the value to be populated in F4.
7) Save and Activate the Domain element.
Test the scenario.
Best Regards,
Pratik Patel
Reward with Points!

Configure another Inspection Type for Production Order

Hi QM Gurus,
I have one scenario, my client wants to have another inspection type for inspection lot origin goods receipt from production because they have this requirement that for some materials they need to have a status profile that will be active for inspection type standard 04. And there are also some materials from goods receipt from production that does not need status profile. Since the only thing that we could assign as specific status profile is to its inspection type. Hence, i need to create another inspection type for lot origin goods receipt from production aside from inspection type 04 that will create automatic inspection lots with different status profiles.I try this in configuration but no inspection lots has been made for new inspection type assigned to LOt origin 04 and also assigned in the material master inspection set-up. How will i do this???
Thanks.
Regards,
Matildo, Edsel
QM Consultant

Hello Edsel,
you can configure for example an inspection type 0401 and activate this inspection type for the inspection origin 04 in customizing. Please look at the following customizing items:
Transaction QCC3
-> Inspection Lot Creation
- Maintain Inspection Types
- Maintain Inspection Lot Origins and Assign Inspection Types
By activating the correspondent inspection type in the material master you can decide which inspection type is used. If you need both then you could think about using the exit QAAT0001 to assign the correspondent inspection type.
Regards
Isabelle

Restrict Production Order type to Production order transaction

We have multiple Production order types. We would like to associate order type to order create transaction codes. For example Order type PP01,PP02 to transaction CO01 and order type say XYZ to transaction CO07.
The reason for doing this is to lock down users from creating material Production orders using CO07 and non-material orders using CO01.
Any feedback will be appreciated

Hi Ramesh,
from your number of posts, I gather you're rather new to SDN.
The reason why someone asked if this is a suggestion or a comment is that this part of the forum is intended for suggestions and comments only.
I suggest you click this link: <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/forums">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/forums</a>
And search for a forum which suits you.
Kind regards, Rob Dielemans
Message was edited by:
Rob Dielemans
null

Movement type for production Reversal-102

Hi Experts
Our client has a requirement as such what transaction MB31 is providing for reversal of Production order,we can do only 4 at a Time.
Our client requires same thing to be done in migo against production order so that we can reverse production 14 lines at a time(i,e 14 different Pos).
I tried in MIGO i got error message
Update control of movement type is incorrect(entry 102X x )
Can we configure this movement type or not.
Regards
Sandeep Patil

asfar as reversing PO isconcerned it is not a good idea to use MIGo or MB31 as the childpart consumption is not increased automativcally.
So you should try CO13,where you can reverse 1 PO at a time
and automatically 262 also takes place.
Moreover why is that you have to revers so many POs which is a bad practice.

Set type for product pricing

Hi,
Its urgent requierment i need set type if any for updating product price for z type condtion table.
I CRM_PRODUCT_CONDITIONS check this package but i dont get any input. the bapi which i am using have no code inside for conditions COM_PROD_MATERIAL_MAINTAIN_API.
i tried these bapis :
COM_PRODUCT_MAINT_CONDITIONS : not Working
PRC_MAST_CREATE_CONDITION :I am uploading conditions separately by using this FM PRC_MAST_CREATE_CONDITION
But this FM is throwing dump when I execute it with correct product Id.Attached screen shot .I am passing CRM for application and
PRODUCTCRM to maintenance group.It is throwing dump at product_id.

any input

PPR(Partner Product Range) Type for Product Catalog Views

Similar Messages

Maybe you are looking for