PPro CC crashes when using Track Select tool

This is probaby the most bizzare bug i have encountered so far - everythig works - i can scub, play and adjust footage, apply effects, titles and time remapping, but when i select Treack Select tool and click on the timeline, Premiere Pro crashes.
This is a new develpment as well - i was able to use PPro CC just fine since i installed it (trial version), until yesterday.
No new applications or updates for Windows, Nvidia card or Adobe were installed lately, but all drivers are up to date (according to various update managers)
Premiere CS6 works fine with the same sequence (mixed RED and DSLR footage)
Problem signature:
  Problem Event Name:    APPCRASH
  Application Name:    Adobe Premiere Pro.exe
  Application Version:    7.0.0.342
  Application Timestamp:    5176598d
  Fault Module Name:    ntdll.dll
  Fault Module Version:    6.1.7601.17725
  Fault Module Timestamp:    4ec4aa8e
  Exception Code:    c0000005
  Exception Offset:    0000000000052fc6
  OS Version:    6.1.7601.2.1.0.256.1
  Locale ID:    1033
  Additional Information 1:    1ce0
  Additional Information 2:    1ce04770b02f823ff20b7f82076eba51
  Additional Information 3:    c192
  Additional Information 4:    c19212ee5e1e8407cb093e848f6cb5d8
System specs:
Creative Suite CS6 subscription
Creative Cloud trial
Windows 7 x64, SP1
Nvidia Quadro 4000 GPU
i7-3039k CPU
32Gb of RAM
thank you

Yep, buggy project..
New project with same and different footage works fine
Other project created in CC works fine
Imported sequence from CS6 works fine
Imported sequence from a buggy CC project into a new project causes crash on using Track Select tool
I was able to revert the project in question to CS6 via Final Cut Pro XML, also works fine (for now, at least), just have to redo some time remapping which didn't come through with XML translation, small loss
I guess i'll wait few more months before switching to PPro CC, maybe mysterious bugs will be worked out by then
Thank you for your replies!

Similar Messages

  • Adobe Photoshop CS4/5 Crashes when using the Move Tool

    Hello. I'm here because I'm having an issue with Photoshop.
    I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
    A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
    Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
    This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
    My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
    I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
    The error code, from Event Viewer:
    Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x65637275
    Faulting process id: 0xe28
    Faulting application start time: 0x01cb2bb3471d87bf
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
    Faulting module path: unknown
    Report Id: b412e368-97ab-11df-8f49-001d60b646ef
    Details:
    System
    Provider
    [  Name]
    Application  Error
    EventID
    1000
    [  Qualifiers]
    0
    Level
    2
    Task
    100
    Keywords
    0x80000000000000
    TimeCreated
    [  SystemTime]
    2010-07-25T05:15:57.000000000Z
    EventRecordID
    78845
    Channel
    Application
    Computer
    Gatherum
    Security
    EventData
    Photoshop.exe
    11.0.2.0
    4bf2d4f6
    unknown
    0.0.0.0
    00000000
    c0000005
    65637275
    e28
    01cb2bb3471d87bf
    C:\Program  Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
    unknown
    b412e368-97ab-11df-8f49-001d60b646ef
    Details in XML View:
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
    <EventRecordID>78845</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Gatherum</Computer>
    <Security />
    </System>
    - <EventData>
    <Data>Photoshop.exe</Data>
    <Data>11.0.2.0</Data>
    <Data>4bf2d4f6</Data>
    <Data>unknown</Data>
    <Data>0.0.0.0</Data>
    <Data>00000000</Data>
    <Data>c0000005</Data>
    <Data>65637275</Data>
    <Data>e28</Data>
    <Data>01cb2bb3471d87bf</Data>
    <Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
    <Data>unknown</Data>
    <Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
    </EventData>
    </Event>
    System Specifications:
    Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
    System Manufacturer: HP-Pavilion
    System Model: GN697AA-ABA a6214x
    Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
    Memory: 2048MB RAM
    DirectX Version: DirectX 11
    Display Device:
    Name: NVIDIA GeForce 8600 GTS
    Manufacturer: NVIDIA
    DAC Type: Integrated RAMDAC
    Approx. Total Memory: 1010 MB
    Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
    Photoshop Version: CS4 Extended 11.0.2

    Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process.  That said, with a little research and care you can do it.  Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
    First, you'll need to know what your operating system capacity is.  For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in.  What version of Windows are you running?
    Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches.  There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
    http://www.kingston.com/
    It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade.  Every computer is different.
    If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
    -Noel

  • Motion 3 crashes when using Track Points. (Add Behavior/Shape/Track Points)

    Please Help!!
    Motion 3 crashes when using Track Points.
    First I make a shape and apply the behavior.
    Clicking analyse shows its renderbar, but stops and motion crashes.
    Thank you.
    Huig
    Mac Pro/2.66 Ghz/3Gig/Aty Radeon X1900   Mac OS X (10.4.9)  
    Mac Pro/2.66 Ghz/3Gig/Aty Radeon X1900   Mac OS X (10.4.9)  

    Robert Kleindienst1 wrote:
    I have two objects moving in a video and want to attach a line shape between them....
    Have a look:
    two circles, a 'dot' applied to each, the dots are moved by a behavior to rotate....
    The line connecting them. is a bezier
    no Motion Tracking needed
    Just dragging the dot into the TrackPoint's dwell
    And:
    Select which points are tracked - see the red arrows:

  • Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

    Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

    Nobody can tell you anything without proper system info or other technical details. The standard answer with all text issues simply is, that you have a "bad font" on your system and need to get rid of it.
    Mylenium

  • Flash Pro CC crash when using pencil, brush tool

    Hello,
    I have bought the full CC package and installed Flash Pro CC today on my laptop (lenovo y50) and im getting crashes when i use the pencil and brush tool.
    When i use the select tool the selection is not in the right place. program feels weird.
    Im using lastest version
    running windows 8.1
    lastest flash and air and graphic drivers.
    It just crashes doesn't even show a error just benggg stopped working.
    Can anybody help me out?
    Greatzz

    solved
    i was having the same problem and found the solution from Adobe.
    you have to go to control panel - hardware and sound - display -
    change the size of the text to the smaller one 100%
    REstart the os and start adobe flash
    i wish this will help

  • Aperture crashes when using the Crop Tool

    I have tried using Aperture in 32 and 64 bit modes. I have the same problem in both when using the Crop Tool. Immediately after I hit "RETURN" key to finalize the crop I have chosen, the VIEW screen goes blank and the SPINNING BEACH BALL appears. I go to the "Force Quit" dialog and Aperture is highlighted in red--signifying a crash (unresponsive application).
    THIS is happening more frequently.
    Help!!

    I had a similar problem. I solved it with these instructions on my blog.
    http://maximegousse.wordpress.com/2010/12/05/my-aperture-library-crash/
    Max

  • Help! Adobe crashing on using 'Track Select Forward' tool?

    There seems to be a bug in Adobe Premiere Pro CC v8.1, Caravan.
    At least once or twice a day when I go to use the 'Track Select Forward' tool, the system crashes? 
    I am on OSX Yosemite, with 32 GB memory and a AMD Radeon R9 M295X 4096 MB Graphics card. 
    Please advise, and thank you!

    You can either use Ctrl Click to add clips to your selection across tracks. Or alternatively if you click with either the Move tool or the Time Selection tool in an blank area on any track the Marquee tool becomes available to draw over any clips on any tracks to select any clip that it touches. Or you can Select All Clips/Tracks and Ctrl click to remove them from the selection.
    In your practical example first use the Time selection tool to mark the time that you wish to delete. Then use any of the above methods to select the clips that you wish to affect. Finally use Time Selection in Selected Clips in the Ripple Delete menu to remove the unwanted part. Note the other options in the Ripple Delete menu that may also be useful to you.

  • Photoshop crashes when using Free Transform Tool

    Hello All Forum Members,
    Recently Photoshop CS6 crashes when I attempt to use the Free Transform Tool through the shortcut (Ctrl+T).
    It also crashes very often when using any of the free transform/transform tools via the menu as well, though not as often as the previous listed situation.
    This experience only occurred recently - for all the time I have been using CS6, this has never happened.
    I have read another thread similar to this, though I don't think the cause of the problem is the same as this was only a recent experience.
    Any help will be appreciated.
    Many thanks in advance.
    Jinky145

    Hi Curt Y,
    Thank you for the quick reply!
    By immediately, do you mean when the loading or when the actual interface has finished loading?
    I have tried both, but neither seems to have worked.
    Is there a menu or someplace else I can reset preferences?
    Many thanks!!!
    JInky145

  • After Effects CS6 11.0.2 crashes when using the pen tool (Mac OS X 10.8.2)

    I'm using After Effects CS6 11.0.2 on Mac OS X 10.8.2. Whenever I use the pen tool to add a vertex, the application crashes. I've submitted several crash reports to apple (they get sent to apple automatically when the app relaunches).
    My specs:
    iMac
    21.5-inch, Mid 2010
    Processor  3.06 GHz Intel Core i3
    Memory  12 GB 1333 MHz DDR3
    Graphics  ATI Radeon HD 4670 256 MB
    Software  OS X 10.8.2 (12C60)
    Anybody else having this problem or have a solution?

    So I have discovered it only crashes when adding a vertex when I'm editing the max a few frames in. When I add vertices on the first frame of the comp I don't have any trouble. I've tried unchecking the box that says preserve constant vertex count, and it still happens.

  • InCopy CC crashes when using track changes

    Hi
    We have had a lot of problems with InCopy chrasing.
    We are using the package system.
    It seems to happen when clients are using Track changes, they open the file and if i opens in Story mode it just spins and won't works. If ou open it in Layout mode it seems fine but as soon as you go to Story mode it spins again.
    If the track changes are accepted the package will work fine again.
    Does Adobe have any updates for this it's becoming very frustating and clients don't want to use InCopy.
    Thanks
    Louise

    I don't think there is anything specific in the upgrade that addresses tracked changes, sorry.
    If you need to keep a version of the INDD file with all the tracked changes (before you accept them, to reduce problems), then I'd suggest you make a whole new version of the project. Archive the old one with all the tracked changes intact, and wipe out the tracking markup by accepting all changes in the new doc.
    1. The ID user makes sure all stories are checked in and up to date (easiest via the Assignments panel)
    2. They unlink all the InCopy stories ... select them in the Assignments panel and click the Unlink icon at the bottom (trash can)
    3. Do a Save As to the InDesign file into a new folder with a new name ("v2" appended, for example, or "_changes-accepted").
    4. In the new file, re-export all the stories to InCopy format, saving them to a new subfolder.
    5. Check out all the stories at once via the Assignments panel
    6. Go to the Type menu and choose Track Changes > Accept All Changes > In This Document
    7. Archive the old INDD file with its linked InCopy files (that have the changes)
    8. Tell users to continue working on the new INDD file.
    Alternatively, InCopy users can export each story showing the tracked change markup to PDF, archiving that for auditors, before accepting all changes.
    AM

  • Computer crashing when using Spot Healing Tool ~ PSE9

    Why does my computer "Crash" when I use the "Spot Healing" tool. While using the "Guided" edit for "Perfect Portait" every other tool works just fine, but when I go to do the "Spot Healing" it crashes. Weather I am in the "Guided" edit or to use it on it's own. This is my 1st attempt using PSE 9 and this feature. HELP!!

    Try clicking on the drop down icon under the word file - then choose reset all tools.

  • Illustrator CC 2014.1.0 Consistently crashes when using the Curvature tool

    I'm using the curvature tool to trace a simple JPEG. After a few minutes the program will crash.
    Never had this issue with previous versions of Illustrator.
    I am using OSX 10.7.5
    Any ideas as to why this would happen?
    Thanks

    I cannot guarantee you my suggestions are warranted, or effective, and I am in no way associated with Adobe troubleshooting staff, but... you should check to make sure that there are no erroneous printer entries listed with your peripherals. In addition, if you have networking functions enabled on your printer, and it does not possess network capabilities or they're malfunctioning, I advise you resolve or remove them from the properties ASAP. I don't know why, but if there's a networking printer error, you'd best expect AI to follow suit.
    If that does not do the trick, you can try removing the prefs file in your AI dir.

  • LR 3.5 'crashing' when using spot correction tool

    I recently upgraded to Windows 7 (from XPx64) and have had to restart LR several times after using the spot correction tool. The circle verifying the correction doesn't appear, and my mouse cursor disappears anytime it is over the LR program window. Task manager indicates the program is running, but I can't operate the program. It also will not close from the start bar, and only closes from the task manager. Any other experience this?

    Spot Tool slowness and lock up can be caused when the 'Lens Corrections' tool is used (i.e. Enable Profile Corrections or Manual tab settings applied). Try temporarily disabling the 'Lens Corrections' tools by turning OFF the small switch to the left of the 'Lens Correction' tab. This will disable all lens correction settings. Try using the Spot Tool again and see if that fixes the problem. If so this is the best solution for now, and once finished with the 'Spot Removal' tool you can flip the Lens Corrections' swicth back ON.

  • PSE6 crashes when using Clone Stamp tool

    Hi! I'm new to PSE and have a standard install of 6.0 - no addons. I've been using the editor for just a couple of days now, but I have experience with other graphic editors.
    I've just started using the Clone Stamp tool. I've cut out a background from a photo, put it into a new file using New>From Clipboard, and am using the Clone Stamp tool to paint background over the edges of the cut.
    So, start Photoshop in edit mode, open picture (.psd created above), select clone stamp tool, right-click and select 100 pixel brush from default palette, place brush some way away from the edge and Alt-click to set "From" point, then move the brush next to edge, click, and start painting over the edge. All OK. Now, move the brush to the right-edge of the picture and start painting so the edge of the brush goes outside the picture a little. This is where it crashes for me. It may be that it's actually the from area that is outside the picture that causes the problem.
    Does anyone else get this problem?
    Now I'm going back to try again taking great care along the right-hand edge to try and stop it crashing!
    Alan

    Hi Alan,
    is it still crashing for you? I tried the same steps and works fine for me. Are you working on Windows/Mac?

  • FW CS4 crashes when using the pen tool for many points

    Good morning,
    Every time I try to create a mask with the pen tool that
    requires a good
    amount of points, FW crashes. I've had this happen with CS3
    as well, but
    with CS4 , it crashes with many less points than CS3 - has
    any one
    experienced this, and more to the point, any solutions?
    Aloha,
    Jerry
    http://MauiWebDesigns.com

    "FatCat" <[email protected]> wrote in message
    news:gkga3u$gtc$[email protected]..
    > Hi Al,
    >
    >> I find I use CS3 for all tasks except for the few
    that require the new
    >> features in CS4. Both DW and Fireworks CS4 are giant
    grey hawgs :-)
    >
    > I knew I should have stuck with CS3!
    >
    > My Bridge quit working, and I figured that was Nature's
    way of telling me
    > to upgrade. I spent all of a weekend trying to download
    the software
    > (akamai means smart - what a misnomer!), then when it
    finally downloaded
    > the installation was corrupt - did that three times -
    took all night to
    > download, with a lot of stalls and freezes.
    >
    > Then on Monday I call customer service and they tell me
    that that download
    > is too large - why offer it, then?
    >
    > Anyway, I bought the DVD, got it a few days later,
    installed it and Bridge
    > still didn't work! Turns out that my anti-virus somehow
    kept it from
    > working! I don't know why, since it was working
    previously. Anyway, now I
    > have CS4, but it doesn't work as well as CS3, as you'd
    warned me - shoulda
    > listened to Uncle Al! ;o) It only cost me $600 plus the
    lost weekend and
    > the hassles of using a glitchy program - live and learn!
    >
    > However, I'm an eternal optimist - haven't lost hope
    that this will get
    > fixed.
    I'm optimistic too. I think it will start to sort itself out
    when Intel's
    new 24-Core 128-bit processors hit the market in conjunction
    with Windows 8
    and OS X Cervelat.
    Al

Maybe you are looking for