PPro CS4 - ImporterProcessServer.exe has encountered problem, unknown error

Hi,
I'm using XP SP3, RAM 3GB, CS4 Master Collection Trial Version 30 days.
New comers CS5 is in 64 bit, so is not our option, our PC only 32bit.
We going to buy CS4, but seems during product assesment not so impresive.
During Exporting/Encoding video, import from mix .swf, .jpg, .avi. but most of time came out error message "ImporterProcessServer.exe has encountered problem ... ". Check on log file Unknow Error
- Source File: C:\DOCUME~1\Martin\LOCALS~1\Temp\Video1_1.prproj
- Output File: C:\Documents and Settings\Martin\My Documents\Adobe\Premiere Pro\4.0\Sequence 01.wmv
- Preset Used: NTSC Source to High Quality Download
- Video: 720x480, 29.97 [fps]
- Audio: 96 kbps, 48 kHz, stereo VBR
- Bitrate: Compressed, VBR, 2 Pass, :0, Avg 1500.00 [kbps]
- Encoding Time: 00:06:45
5/20/2010 5:40:09 PM : Encoding Failed
Error compiling movie.
Unknown error.
I have look thru the previous posts, but I still not sure what is the real problem, H/W spec problem, Windows problem, or CS4 Trial problem?
From prev post I conclude some posibilities:
Need to troublehost, http://premierepro.wikia.com/wiki/Troubleshooting
CS4 more problem, downgrade CS3 is option, CS3 no problem
Windows C++ problem, need to reformat.
etc.
If we have to thoubleshot then problem, I just need to edit the video.
So should we proceed to buy CS4? Otherwise will try other product.
We have 2 general around, Gen. Bill Hunt and Gen. Harm Milaard, hope can give enlightment.
Thank you.

How to ask questions the smart way

Similar Messages

Crw32.exe has encountered problems...

I am getting the Windows error 'crw32.exe has encountered problems' when opening a report that I just created in Crystal Reports XI hitting an Oracle db. Windows shuts down CR. This has happened to me a twice today. My only recourse is to start the report over from scratch. The report isn't particularly complicated - 4 groups with summaries and a GIF logo in the header. Any suggestions or questions for more information would be appreciated. This is very frustrating.

Ive had some suggestions for you to try.Â Apparently this might be down to a driver issue although it would also help to know if you are running on Windows Vista or on an older version of Windows.Â
If you are using the Microsoft ODBC driver, can you try instead switching and using the Oracle ODBC driver.Â
You can get Oracleâu20AC(tm)s ODBC drivers here:Â http://www.oracle.com/technology/software/tech/windows/odbc/index.html
Can you see if that helps ?

Having problem with adobe - has encountered an unknown error.

When I go to adobe and open a PDF file, I try to Edit the text and I get an answer that Adobe has encountered an unknown error…please help

Hi lazio1952,
Are you opening the PDF file in Acrobat? And if so, what version? Does the error occur with any PDF that you try to open, or just one in particular?
I'm eager to help you get to the bottom of this error, but do need a little more information to go on. I look forward to hearing back from you with a few details about your particular issue.
Best,
Sara

When trying to edit text and fonts in Acrobat Pro 11 I keep getting a message saying acrobat has encountered an unknown error?

I have just downloaded Acrobat Pro V 11.0.0 and tried to edit an existing PDF file. When I try to do this I receive a message that Acrobat has encountered an unknown error - what am I doing wrong?.

Hi myarwema,
Are you using Acrobat on Mac OS or Windows (and what version?). You say you have version 11.0.0, but the current version is 11.0.10, so please choose Help > Check for Updates and install any available updates for starters.
Does the error occur regardless of the PDF that you try to edit? If the problem is widespread, I would recommend a repair/reinstall of Acrobat (if installing the updates doesn't help). If the problem occurs with just the one document, that PDF could be damaged.
Best,
Sara

When attempting to edit a PDF doc, I get "Adobe has encountered an unknown error" Why?

When attempting to edit a PDF doc, I get "Adobe has encountered an unknown error" Why?

Hi myarwema,
Are you using Acrobat on Mac OS or Windows (and what version?). You say you have version 11.0.0, but the current version is 11.0.10, so please choose Help > Check for Updates and install any available updates for starters.
Does the error occur regardless of the PDF that you try to edit? If the problem is widespread, I would recommend a repair/reinstall of Acrobat (if installing the updates doesn't help). If the problem occurs with just the one document, that PDF could be damaged.
Best,
Sara

HT4623 when restoring my iphone 3g the system shuts down as it has encountered an unknown error (1015) What do I do now?

Whilst updating iOS from £.1.3 at the point bwhere hardware is reloaded to the device, it stops displaying a message - unable to complete due to an unexpected arror and shows the number 1015. I am then instructed by iTunes that the device has only partly restored and must be fully restored attempts to restore all terminate with the same unexpected error message - can anyone offer guidance

The phone was jailbroken or hacked to unlock it or you are trying to install an unsigned version of iOS.
You can't get help here. Discussing jailbroken / hacked devices is forbidden by the terms of service.
Look elsewhere for assistance.

CrystalReports 2008 crw32.exe has encountered a problem and needs to close.

Hi Guys,
I just installed Crystal Reports 2008 and tried to use it, but every time I try to expand Create New Connection tree, in order to add some data to my report, program crashes and I receive message:
u201Ccrw32.exe has encountered a problem and needs to close. We are sorry for the inconvenience.u201D
Thus anyone have a solution to this problem?

Well,
Each time Crystal Reports crashes I see three errors:
1. Faulting application crw32.exe, version 12.0.0.549, faulting module unknown, version 0.0.0.0, fault address 0x06000030.
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 63 72 77   ure crw
0018: 33 32 2e 65 78 65 20 31   32.exe 1
0020: 32 2e 30 2e 30 2e 35 34   2.0.0.54
0028: 39 20 69 6e 20 75 6e 6b   9 in unk
0030: 6e 6f 77 6e 20 30 2e 30   nown 0.0
0038: 2e 30 2e 30 20 61 74 20   .0.0 at
0040: 6f 66 66 73 65 74 20 30   offset 0
0048: 36 30 30 30 30 33 30 0d   6000030.
0050: 0a                        .
2. Faulting application drwtsn32.exe, version 5.1.2600.0, faulting module dbghelp.dll, version 5.1.2600.5512, fault address 0x0001295d.
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 64 72 77   ure drw
0018: 74 73 6e 33 32 2e 65 78   tsn32.ex
0020: 65 20 35 2e 31 2e 32 36   e 5.1.26
0028: 30 30 2e 30 20 69 6e 20   00.0 in
0030: 64 62 67 68 65 6c 70 2e   dbghelp.
0038: 64 6c 6c 20 35 2e 31 2e   dll 5.1.
0040: 32 36 30 30 2e 35 35 31   2600.551
0048: 32 20 61 74 20 6f 66 66   2 at off
0050: 73 65 74 20 30 30 30 31   set 0001
0058: 32 39 35 64               295d
3. Hanging application crw32.exe, version 12.0.0.549, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 48 61 6e 67   ion Hang
0010: 20 20 63 72 77 33 32 2e     crw32.
0018: 65 78 65 20 31 32 2e 30   exe 12.0
0020: 2e 30 2e 35 34 39 20 69   .0.549 i
0028: 6e 20 68 75 6e 67 61 70   n hungap
0030: 70 20 30 2e 30 2e 30 2e   p 0.0.0.
0038: 30 20 61 74 20 6f 66 66   0 at off
0040: 73 65 74 20 30 30 30 30   set 0000
0048: 30 30 30 30               0000
However, I am not sure about their meaning.
Regards,
Vladimir

JavaTutor.3.x error -jre.exe has encountered a problem

What transpires�
1. I click on the JavaTutor.3.x shortcut which was installed by courseware supplied by Sun Microsystems through EDS University
2. Within a second or two, the error message box appears, and states: "jre.exe has encountered a problem and needs to close. We are sorry for the inconvenience. If you were in the middle of something, the information you were working on might be lost. For more information about this error, click here"
3. When I "click here", the Error signature box appears containing the following information:
AppName: jre.exe
AppVer: 0.0.0.0
ModName: unknown
ModVer: 0.0.0.0
Offset: 00010100
4. This same dialogue box has the followng option: "To view technical information about this error report, click here." When I "click here" the following information appears:
Exception Information
Code: 0xc0000005
Flags: 0x00000000
Record: 0x00000000000000000
Address: 0x0000000000010100
System Information:
Windows NT 5.1 Build: 2600
CPU Vendor Code: 00FD0094 - 30024678 - 00000001
CPU Version: 00000F27
CPU Feature Code: BFEBF9FF
CPU AMD Feature Code: 00E9E850
Thoughts?
-clark gordon

I too, am having the same issues as posted above. Here is what I have learned:
1) The software runs fine on a P3 1GHz system. (WinXPpro)
2) The software runs fine on a Celeron 500MHz system. (WinXPpro)
3) The software does not run on a P4 1.8 system (Win2K)
4) The software does not run on a P4 2.8 laptop (WinXPpro)
5) On the systems that the software fails to run (P4s), the script changes above do not help.
I am not much of a 'coder', but I am wondering if the software is trying to write to a memory location (L2, maybe) table that was writable on pre-P4 processors, but is not writable on P4's. Please forgive if I am totally off the mark here. Again, I am not much of a programmer.
I am counting on all of us teaming the solution for this. Please update this thread if you find a fix.
spider51

Adobe Muse.exe has encountered a problem and needs to close.

I get this message when trying to open muse. It happened after an upgrade.
"Adobe Muse.exe has encountered a problem and needs to close. We are sorry for the inconvenience."
Is there anything I can do?

Please send me ([email protected]) the MuseLog.txt file from your Documents folder.
Then please delete the "MBLStore" and "OOBE" folders found in
on Mac: <yourusername>/Library/Application Support/Adobe
on Windows XP: <youruser>\Local Settings\Application Data\Adobe
on Windows 7: <youruser>\AppData\Local\Adobe
and delete the "AdobeMuse" folder found in
on Mac: <yourusername>/Library/Preferences
on Windows XP: <youruser>\Local Settings\
on Windows 7: <youruser>\AppData\Roaming
Then launch Muse. It will go through the first launch experience of asking for UI language, AdobeID, etc.
Please let me know whether or not that works. Thanks.

Firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience. I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to s

firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to start Firefox, even in safe mode. i have checked with latest antivirus softwere also.. i didn't find any thing suspicious.
== This happened ==
Every time Firefox opened
== after loading firefox 3.6.6 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

I was having this problem few days ago,and I have fixed.Try this steps-If you have AVG antivirus so go on firefox>Tools>Add On and Disable AVG safe search and AVG tool bars too.Then restart computer.

LiveCam.exe has encountered a problem and needs to close. Constant Error. HELP PLEASE

Alright so basically, my parents got a buy-one-get-one-free offer on webcams at christmas, and so they gave me one for my own as i lost my old one. Everything was working fine, seemed like a great camera.
However, randomly one evening when i tried to open Live! Cam Center to record a video, it refused to open, instead giving me a small white box with the loading symbol inside (thats where live! cam center usually opens out into the UI) and a boz saying "LiveCam.exe has encountered a problem and needs to close. We are sorry for the inconvenience.".
Now i thought that it was just a random one-off thing, but it happens EVERY time, WITHOUT fail. The cam works fine on MSN and skype etc, just when i try to record anything or manually take pictures , cam center doesn't work. And it doesn't seem to just be cam center, almost every software i've tried for just plain recording/capturing failed.
Tried updating to latest drivers and software, tried using older versions, tried using the cam from my family pc (identical cam) - failed, tried using all different USB ports randomly, failed. I'm really desperate here now, i'm at the point where i'm almost going to give it away and buy a non-creative webcam cos its really annoying.
My webcam is the Live! Cam Video IM Pro. Here's a copy of the error report from windows, its the same every time:
AppName: livecam.exe AppVer: 2.2.3.0 ModName: ctvidcap2.dll
ModVer: 2.2.3.0 Offset: 00002ca
PLEASE HELP! IM DESPERATE >_

See if there are any Crash Reports ID's saved.
Type '''about:crashes''' in the Location Bar and hit Enter.
Then open each Crash Report and once the report is loaded completely, copy and paste the URL of each report into the the '''''Post as Reply''''' box in this thread.
IMO, seeing that you are using WinXP, you might be better off with the older Flash 10.3.183.90 version. Flash 11.0 and later have "improvements" that don't work on WinXP - only Vista and later. Adobe did continue to support and provide security updates for Flash 10.3 until a few months before WinXP went EOL back in April of this year.

Export op results in error "EXP.EXE has encountered a problem and needs to

I have been working with Oracle Designer on an old computer (running Windows 2000 and an Oracle 10.2 database) and I am attempting to get it to run on a newer computer (running Windows XP and an Oracle 11g database (release 11.1.0.6)). Regarding the Designer version, I installed the same version (9.0.4.3) that was running on the old computer. On the new computer, features of the tool have worked (ER Diagrammer, DB Design Transformer, Design Editor), but the Export operation of the Repository Admin Utility did not work. When I attempted to run Export, the following happened:
(1) The "Save As" dialog was displayed (as expected).
(2) A EXP.EXE script window opened for the Export command and displayed the following:
Export: Release 9.0.1.5.1
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
(3) Immediately, an error dialog appeared stating "EXP.EXE has encountered a problem and needs to close. We are sorry for the inconvenience."
I am testing Export so that I can test Import, which is the operation I will need to load data from the old computer.
Any ideas how to fix this problem?
If it can't be fixed, are there other ways of transferring data from one repository installation to another?

add the 11g client to the pc and then modify the registry so that it points to the imp and exp from the 11g client.

AS 10gR1 vs "Apache.exe has encountered a problem and needs to close" on XP

I would really appreciate if somebody has solution for Windows error message popup box
"Apache.exe has encountered a problem and needs to close".
I have installed Oracle Application Server 9.0.4 Infrastructure (from 10gR1 AS) on XP laptop (I know it is unsupported)
opmnctl.exe status show "UP" status for OID,OC4J but "Down" for HTTP_Server
When I try to run
opmnctl.exe versbose startproc ias_component=HTTP_Server
I will always get "result=failure", text="failed to start a managed process after the maximum retry limit"
and Windows message popup box
"Apache.exe has encountered a problem and needs to close".
(I have also 9i and 10g installed in separate Oracle homes).

I have made 3rd attempt to re-install AS due "Apache.exe has encountere..and must be closed" error.
I have succeeded after doing following:
- unistall previous AS 9.0.4 (10gR1) install
- disabled McAffee and firewall
- changing NLS_LANG=AMERICA_AMERICAN.WE8ISO8859P15 prior installation
- removed path to other OH (9i and 10gR2)
- restart XP laptop
- doing install AS 9.0.4 (10gR1)
Now opmnctl.exe status shows everything works (including HTTP_Server :)

Disp+work.EXE has encountered a problem and needs to close ...

Hi all
I've installed NW 7.02 ABAP trial on a VM running with XP Pro english version, SP3.
Via SICF also all services have been activated.
When calling SE80 -> Web Dynpro -> (e.g.) WDR_TEST_MISC (or any other WD apllication) -> opening: Component Interface -> double click on INTERFACECONTROLLER -> selecting: CONTEXT -> and then select the 'Properties' tab ==>> the following ERROR occurs:
=> disp+work.EXE has encountered a problem and needs to close ... (seems to me to be a MicroSoft popup)
After closing this popup, another one appears, telling me: 'SAP GUI for Windows 720 - NSP: Sap Systemnachricht; Work process restarted; session terminated'.
That's the end of this session :-((
This error occurs only when I try to call the properties of the Interface context!
Regards, Stefan

Hi Stefan,
I had this problem yesterday while using SGEN after a fresh install of NW 7.02 (64 bit).
I forgot to switch of the DB Log and it ran full (I think in earlier versions of the preview installtion MaxDB Log was set to overwrite mode by default which isn't the case with this installation). Anyway, the log ran full, disp+work died and after that it was imposible to restart the system because the dispatcher died shortly after it had started.
Maybe you check your DB with the database manager.
Good Luck
Markus

Indesign.exe has encountered a problem and needs to close.

After formatting my hard drive and reinstalling InDesign CS3, I am not able to open the program.
When I click the shortcut to start the program, it starts to load for about 10-15 seconds, then freezes and gives me this error message:
"Indesign.exe has encountered a problem and needs to close."
I tried reinstalling over the first installation. Then I downloaded the latest updates (Ver. 5.0.4)
Then I rebooted the computer. Same problem. Rebooted two more times. Same problem.
Uninstalled the program. Reinstalled. Rebooted. Same error msg. Installed update to Ver 5.9.4, same error msg.
Rebooted again, same error msg.
What's next? I am at a loss.
Thank you

Ok, I did the following with no luck yet...
Deleted fonts that had been dragged into the Windows Fonts folder.
Searched for adobefnt*.lst, found 6 files, deleted them.
Uninstalled InDesign again.
Downloaded CleanScript.
Did CleanScript Method 1 as described in ReadMe file:
    Uninstalled InDesign
    Went to documents and settings\username\application data\adobe\patchlogs
    deleted adobeInDesignCS35.0.log
    deleted adobeSingCS3 0.1.log
    deleted adobeLinguistics CS3 3.0.0.log
    Went to documents and settings\username\local settings\application data\adobe
    Looked for files to delete with CS3 in the name, but did not see any.
    Installed InDesign
    Rebooted
    Would not start
Did CleanScript Method 2 (same as you suggested)
    Uninstalled InDesign
    Ran Clean Script
    Reboot
    Run MSconfig
    turned off everything not marked as "essential"
    reboot
    Tried to install ID
    Error Msg: Windows Installer Service needs to be running
    Ran MS config/ enabled Installer service
    reboot
    Installed ID
    Tried to start it, would not start, got this error msg:
          Licensing for this product has stopped working. You cannot use this prodict at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT...
    Started MSconfig/ enabled all the old services
    reboot
    Tried to start ID, got same Licensing error msg
    Reinstalled ID on top of the old installation
    Tried to start ID
    Got the OLD error msg
         InDesign.exe has encountered a problem and needs to close.

PPro CS4 - ImporterProcessServer.exe has encountered problem, unknown error

Similar Messages

Maybe you are looking for