PPRO is only playing solo channels - how do I get it back to playing both
I've been editing a project for about six weeks and had no problem importing audio and video. Everything had been synched up ok and PPRO was behaving normally.
I've had two weeks off and have just imported more footage but the audio now doesn't play properly. It will only play a mono track through one speaker/headphone if I select it as a solo channel. If I play both channels together it goes silent.
I've installed PPRO 6.0.5, running Windows 8.1 on a custom built PC - 8gb ram, 256gb SSD. I'm using a separate sound card, but on board graphics card. The audio files are wav files.
I suspect I've unwittingly pressed a button I shouldn't have, as it has been working fine on the same project before. I've gone through the other sequence tabs and the sound on those is now behaving in the same way (ie mono only if selected as solo channel).
I've checked the driver for my sound card, and my speakers and headphones are otherwise working fine. The sound mixer is showing sound being "perceived" by the software, because the levels are bouncing appropriately. The levels in both channels are bouncing also - it's not that only one channel is processing data. It's just that I can't hear anything unless I select just one channel, and then it comes through mono in one speaker/headphone.
As and experiment I've also started a new project and just put some bars and tone in it, but alas it is doing exactly the same thing.
All help gratefull received!
Thanks for getting back to me Jim.
This is what the properties tab of the audio clip says:
Type: Windows WAVE audio file
File Size: 5.3 MB
Source Audio Format: 48000 Hz - 24 bit - Mono
Project Audio Format: 48000 Hz - 32 bit floating point - Mono
Total Duration: 00:00:38:14211
I had assumed the audio was two mono tracks.
I may not have explained myself perfectly.
I can hear the audio out of whichever solo channel I select, but not both channels at the same time (eg in my bars and tone experiment, I can switch between channels and here tone in either, but not both simultaneously). My deduction from this is that the sound card, speakers and headphones are ok. I've listened to music etc through my headphones and know also that stereo is working ok.
Previously I could hear both channels simultaneously. Whilst I could carry on as it currently is, I would only be able to hear the audio out of one speaker/headphone. Plus I also want to know what has changed since I started the project and it was working ok.
Could it be a problem with a codec? Or an issue with upgrading to win 8.1? My sound card is a Creative Technologies Sound Blaster X-fi Xtreme Audio card.
Thanks for you help
Similar Messages
-
My current project in the Events Library has gone into list mode. ie a single clip on the left one above another, so showing only about 7 clips. How can I get it back into normal horizontal mode?
That's about what it's supposed to look.
How do You want it to look ?
a. You can change places by using this
b. May be You changed this top right symbol of an hard disk ?
c. or changed the number of frames to be viewed ?
d. OR - it can (at least for me) be so that You think of how it looks in iPhoto. (To me a very common mistake)
Yours Bengt W -
Help please - phone icon only found in spotlight - how do i get it back!
OK - so ,,,,I was moving my apps around to try get them organised and as i normally do i moved the 4 main apps off the bottom bar onto a page so i could then move icons onto the bottom bar to quickly move them to the new pages.... are you following me!
Well I then started moving apps around all over the place but when i went to look for my 4 apps (phone, ipd, safari and mail) on a screen i couldn't find them anywhere. They can be found in spotlight but my question is.....how do i get the app icons back onto a screen!
Please someone helpIf you have more than 180 apps, they won't all show on the screens. Try this:
Start by resetting the home screen layout: Choose Settings -> General -> Reset and tap Reset Home Screen Layout. That will put the original icons back in their original positions. The rest you have to move manually.
To get an icon to another page easily, with iPhone OS 3.0, you can drag the icon you want to move to the top right or top left corner of the page, and hold it there. The pages will keep flipping. When you've arrived to the page you want to add the app to, just move the icon away from the corner. -
Library (Damaged) only partially recovered. How can I get it back?
I left my cpu on for a couple of hours, came back home and opened Itunes. I got a message saying my library had been damaged and Itunes was trying to recover it. I panicked and hit "Stop". Now, only a small portion of my ratings, and none of my playlists are in my Itunes.
Is there a way I can get them back?Normally, the iPhoto Library Folder is in your Pictures Folder.
To create and populate a new library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD -
I have at least 3 albums of music that appear in the "purchased" column on itunes, but the files have gone missing. I have the files on my iphone, and can listen to them on it, but when I try to play them on my Mac I get the message : The song “XXXX” could not be used because the original file could not be found. Would you like to locate it?" but when I try to find the songs in my itunes library the files are not there. I have had to de- and reauthorize my computer to get the apple tv (1) to play old content, and wonder if in doing that, I have somehow wiped out old purchased song files. Is there a way to transfer these songs back onto my desktop Mac? The "transfer purchases from iphone" function doesn't do it, seemingly because the songs were all puchased via the desktop.
I have no need for it so cannot recommend directly but here are some programs
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
iRepo Mac and Windows
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
iPodCopy Mac and Windows -
Since installing Ios7 280 music tunes out of a total of 360 will now only play when I'm within range of WiFi. The remainder now appear with the stupid Icloud logo beside them. How can I get them back on my Iphone 4s and scrap this stupid icloud that I did not want or ask for in the first place. Why can't rotten apple ask if you want the dam icloud rather than just stealing everything without permission and then you can only have access to it through wifi.
Wow, just posting and it seems that there is a solution that is working for me...
What I've did is I turned off iTunes Match on my iPhone, then turned in on again. Now in my iTunes library on my mac I can get the duplicates to be matched or uploaded to iCloud with a right-click, add to iCloud. iTunes Match starts to check the songs and everything is done correctly. Pretty nice! -
I subscibed to ITunes Match and all my music has disappeared from my Ipod touch and will only play through WiFi so I cannot play music in my car. How do I get it back please
You'll need to switch off iTunes Match on the device & sync the iPod with iTunes as hopefully you've kept all your music on your PC.
-
What happened to my entire 3000+ songs in my library I used to see when I opened iTunes? I only see the most recently purchased. How do I get them back? I don't have an I phone to play they on, only a droid.
Pammie49Hi Sarah,
It sounds like the songs have either not yet synced over to the iPhone, or something went wrong when attempting to sync to the iPhone. My recommendation is to uncheck the "Sync Music" checkbox.
Once you have done that, recheck the "Sync Music" checkbox, and apply the changes once more. This will instruct iTunes to completely remove all music from your iPhone, and then copy the files once more. If you have a large amount of music, this initial sync may take a while.
If the above does not resolve your issue, see the following articles:
iOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Thanks,
Matt M. -
My mac desktop will not provide sound from internal speakers. When I go to audio devices window it only shows airplay. How can I get internal speakers back.
There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store. -
I can't play my music from my cds on my ipod because they are in grey how do I get them back to normal
SKF5656 wrote:
I just purchased a new laptop, so consequently had to buy Itunes Match to get all of my music back.
No you didn't.
Now everything is in the cloud
Except for anything you did not purchase in iTunes Store.
Only you iTunes purchases are in the cloud.
Reada the article that brenden dv posted to copy your iTunes library to new computer. -
When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event. Now it shows only one photo at a time. How do I get it back? Can you help?
On the bottom bar of the window (on the left iPhoto 11, on the right in other versions) note the slider. Drag it left.
Regards
TD -
I purchased some alert tones on my iphone 4s via itunes yesterday. They all worked just fine until the phone ran out of battery and I plugged it in and restarted. They have vanished from the phone and when I connect to my PC they only show up as 'on my device' under tones and with a grey dotted circle by them. How do I get them back? This is crazy! I purchased one a second time, it worked, I switched my phone off and on again and it has gone again!!!
Having the same issue on multiple alert tones on my Iphone5c. After purchase they disappear from the phone and show up on my itune under Tones grayed out with a dotted circle next to them.
-
This is ONE of the MANY reasons, I have held off on getting and iPhone. Because the ONLY option in getting the music onto it, is by using itunes, instead of just being able to drag and drop. This is annoying as F***.
I paid for and downloaded a ringtone from the iTunes store. It was working fine. Then I hoooked up my iphone to my bf's laptop, competely forgetting that it had already been synced to MINE, which is broken and toasted. For some reason, it deleted everything off my phone, I spent 3 hours trying to figure out how the **** to get music back onto my iphone using itunes. It's NOT a user friendly program, and being a computer savvy as I am.....I HATE USING IT. But unfortunately, I don't have a choice. So, I was able to get the two ringtones that I created with my free ringtone maker app BACK into my phone. But go figure, the one that I actually paid for, I can't get back on. It was in my itunes, and on my iphone...but had the exclmation mark beside it. I have already gone to the support page and followed the instructions for retrieving it. I have manually deleted it from my computer SINCE this discovery, by deleting it from itunes. So....to make sure yall are understanding this...I tried tracking it down by searching my computer....and I couldn't find it, although it was still listened on BOTH my itunes on my laptop AND in my iphone. I trued to manually delete it from the iphone....wouldn't work. So i manually deleted it from itunes.
My question is this....
HOW ON GODS GREEN EARTH DO I GET IT BACK!!!!????
It's only $1.29 canadian, but man, this program is ******* me off to no end.
It's stupid that Apple has completely restricted us. -sighs gritting her teeth- I just want my ring tone back. That's it. I can't even figure out how to redownload it....or if I can even do that.
Please someone help me. I'm soooo frustrated.
Thanks
CERNever mind I fixed it. Just in case anyone else has this problem, after you reinstall iTunes you have to delete all your old music, and if you have iTunes match all the songs you have saved on itunes match will display and you just have to download them to your Macbook.
-
i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?
If you bought them on your iPad then you will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to the Tones part of your computer's iTunes library and you can then sync them to your iPhone - ringtones are a one-time only download, so you won't be able to redownload them directly on your phone.
-
Updated to iOS 7, but only the first page of my app buttons stayed. How can I get them back?
I just updated to iOS 7, but only the first page of my app buttons stayed. How can I get them back? And how do I show the Apple Music and Weather app- I can find them in spotlight, but there isn't an app button for them.
Are you sure you don't see them when you swipe to the left?
I actually had only one icon showing on the second page .... and then all of the rest showed up on pages 3, 4, etc.
The Apple Music app is a red box with a white note
Weather app is a blue box with a white cloud and yellow sun
Did you try resetting or restarting the device?
Maybe you are looking for
-
I am new to sap. i wanted to know the how to include archiving checks at end of the partner in sp09
hi this is Priti This requirement is in place to enable the customer to perform the Archiving checks along with the EOP check during the blocking run of Business partner. There are few application which already have archiving check defines for the bu
-
Material for Project Based Production
Dear All, I have to work on project based production can any one refer me some links or even the code of manual if any so i can purchase it. or any book. plz i waiting for a reply soon
-
I have a video file of a brass band performance that I have put into FCE. However the audio quality is not the best, and want to replace it with a separately recorded audio file of the same band playing the same music. I have dropped the new audio in
-
Where can I find a list of my contacts on Firefox?
I cannot find a left-side category for contacts on my Firefox window that gives me a list of my contacts and their email addresses. Where can I locate my contact list?
-
Premiere Elements has encountered an error - CPP-610
Hi, I have a member of staff using Premiere Elements 8 that crashes the moment they select Timeline within a project. The error is as follows; Premiere Elements has encountered an error. ..\..\SRC\WIN\WINPATHUTILS.CPP-610 Once you OK this the program