PPro opening slowly for insisting projects

I'm having problems with previosuly saved projects opening vry slowly with CS6, I have 12 gigs RAM with a solid state 60gb main drive that hosts the windows 7 OS and data drive and then four drives controlledby a raid controller card. One the project is open everything works well, just takes several minutes for projects to open. Suggestions?

Four Sequences is not very many.
You can check your Project file size by looking at the .prproj file.
Dynamic Linked elements are obviously not the problem (since
you don't know what they are, I doubt you have used them).
What is shown above appears on the bottom left of the interface.
That is an indication of the media files being located and loaded
into the Project. Note the circled progress '(14 remaining)'.
What you will see on the bottom right will be audio files conforming
(note the yellow bar indicating the progress of a single media file).
Do not interrupt the conforming process, and allow plenty of time
for all files to complete conforming before you try to start editing.
If your Project is re-conforming audio files every time you
open the Project, that may be another problem.

Similar Messages

Open Forte for java project in Sun java studio enterprise

Hi Everyone, I am new to Java development. I have a java application developed in Forte for java 4 and I need to open and compile it in Sun java studio enterprise. Could anybody tell me how to do that? Thank you very much.

The recent versions of the IDE (starting with NetBeans 4.1 and JSE 8) are based on a more-robust project system that is ant based. Projects from Forte for Java 4, unfortunately, cannot be directly opened in JSE8, NB4.1 and later.
If you do have access to the original source code, pl. try the following in the latest version of JSE or NetBeans:
- Create a fresh project in jse using File | New Project. (For a java standalone app, you would choose General | Java Application from the dialog).
- Add the existing files to the empty project. You can do so by right-clicking on the project, selecting properties and adding the existing source directories under 'Source Packages' in 'Sources' category.
Or from the new project dialog, you could select 'General | Java Project with existing sources' option.

IMovie for Mac: "iMovie cannot open files in the "iMovie for iOS Project" format."

Question, asked professionally
When will iMovie for Mac be able to open iMovie for iOS projects?
Question, asked snarkily
Any reasonable expectation that we will ever be able to edit projects--created in iMovie on our fancy new expensive phones--in iMovie on our fancy new expensive laptops?
Specs
iPhone 6 Plus (contract-free, 128 GB)
iOS 8.1.2
iMovie for IOS 2.1.1
MacBook Pro (Retina, 15-inch, Mid-2014)
OS X Yosemite 10.10.1
iMovie for Mac 10.0.6
Error Messages
iMovie for Mac: "iMovie cannot open files in the "iMovie for iOS Project" format."
iMovie for iOS: "An error occurred during export."
Frustration
Manufacturer: Apple (a multibillion dollar company)
The year: 2015
Hours lost: Three Weeks
Total costs for both devices: $4,000
Background Details
I just wasted thousands of dollars on these two hardware devices by making the rookie mistake of assuming projects were compatible across iMovie applications. However, the exported .iMovieMobile project files are in an incompatible iMovie for iOS Project format that iMovie for Mac cannot import. So I am stuck with a 15 GB .iMovieMobile project file--for an hour-long+ video--that I created and I was editing on my iPhone for weeks that I can no longer edit on my iPhone due to an error, nor potentially rescue the lost hours on my Mac, the sole reason I purchased it one day ago. The reason I can no longer edit the project on the iPhone is because iMovie for iOS suddenly stopped displaying the video of the project in preview, external display, etc. The clip snapshots remain visible and the audio remains audible, but the video appears fully black. Any attempt to export the video at any resolution generates an error message. (This error applies only to this project; other projects export without issue.) I can save to and from iTunes or iCloud without issue, but import into iMovie for Mac is unavailable for this latest version. Deleting and reinstalling the app does not resolve the issue. Nothing has resolved this issue; so I purchased the Mac as a last attempt, and it appears that I will have to begin the meticulously painful process of recreating the video from scratch with all the titling, sound effects, precise edits, transitions, organization, etc. This video was to surprise my mother for her birthday with "this is your life" footage, including my late father. It may seem like a small first-world problem, but such things carry big emotional impacts. What began as such a wonderfully intuitive and joyful experience has descended into a soul-suffering nightmare of catastrophic proportions. This software grinch stole christmas.
Likely Suspect
I believe this originated from Apple's confusingly designed iTunes client that removed videos used by iMovie for IOS during a sync, which I successfully restored back to the iPhone. This apparently resulted in iOS seeking and then claiming to find all of the videos, but somehow a bug in the coding causes the audio to play but not display video, and no way to resolve the bug from an enduser standpoint. I was hoping that iMovie for Mac would allow me a workaround, but I'll never know because the iOS and Mac formats are currently and dishearteningly incompatible.
Suggestions
I never performed a full backup of the iPhone, but I don't believe any of the iCloud nor local backups actually backup iMovie projects themselves anyway. (That's a fail.) So one must back them up manually to iTunes or iCloud.
MANUALLY BACKUP YOUR PROJECTS DAILY, IF NOT HOURLY.
MANUALLY BACKUP YOUR PROJECTS BEFORE IMPORTING OR SYNCING FROM ITUNES.
MANUALLY BACKUP YOUR PROJECTS BEFORE IMPORTING VIDEO CREATED OUTSIDE OF YOUR IOS DEVICE.
Resolutions
Hope Apple fixes this problem soon? Perhaps.
Return the Mac to Apple, if they allow? Perhaps.
Someone in this community will provide a magical workaround--that I haven't already attempted? Perhaps.
As unlikely these options may be, I shudder to imagine that I may be forced to suffer no resolution and $3,000+ completely down the drain, because if iMovie for IOS worked as intended, I wouldn't have ever purchased the Mac as a last ditch effort to rescue the project. It meant that much to me to surprise my mother by attempting to retrieve this project file from oblivion--but to no avail.

I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

Searching for a Project status = CLSD and open purchase orders?

Hi,
I am searching for a project status (Project Builder CJ20N) which allowed my to set a CLSD or a simillar status for settlement with open purchase orders.
This staus should allowed to process with open orders BUT not allowed to add new orders after setting this status.
Have somebody any idee? Or it is impossible?
Tahnk you in advanced for your Help.
Regards Baldy

Hi TV-kid,
while I was waiting for an answer I got to the same conclusion, so what you offers me is quite tempting actually.
I got a look to your website and it seems convincing. Still though, your case studies are in other business area, It's only a mater of good knowledge of File Maker.
I did download the test-drive last version of File Maker plus their samll Business Solution. I did read most of the documentation and the learning process would be too long to construct ourself a good crossed-data base.
I'd like to get in contact with you to look for a possible colaboration. to get private, I'd liketo do it through your contact link in your website .
To whom shall I write?
Thanks
Cheers
Cheers

Project Server 2010 - Unable to open project, no valid Project Detail Page could be found for the project error

I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP. Then I Submit the workflow to go to the next stage and I get the "Unable
to open project, no valid Project Detail Page could be found for the project" error. After that the project is stuck on the same error. All of the 18 stages have PDP and Schedules assigned to them.
Any ideas on why the workflow cannot see the PDPs? Is there a farm permissions that I am missing? Thanks!

Hi David,
It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
Hope it will help you going forward in resolving your issue.
Guillaume Rouyre - MBA, MCP, MCTS

Final Cut won't open for a project

I can open Final cut Pro HD But I cannot open my project After adding 10 Livetype titles. Every time I try to open the project the application crashes at 13% of reading the project. I can open other projects but not this one. The Project is only 30 minutes long. I Tried going into my library and deleting the Com apple final cut pro plist and the data folder but it did not help. I also deleted the livetype titles that I created off of my hard drive and I have have the same problem. Does anyone Know how to delete Livetype titles from a project without openng Final cut pro or how to resolve this problem. Please Help.

Should I delete all of the render files for that project. One thing that I did do, since I worked on the project from my G4 laptop on a Lacie External drive, I tried opening the project up on my g5 desktop computer where there was no render files and the project still would not open. Is there any kind of way to delete livetype titles from the project without opening it.

Cannot open project: the folder for this project cannot be found cs4

I am using Encore CS4 and I get the error "cannot open project: the folder for this project cannot be found"
Having searched the forums I can not find a solution for when the project folder has been deleted.
Can someone tell me the solution to this issue.

If you deleted the Encore directory, you cannot fix this. You'll have to start over.
Encore creates this folder structure:
Root or some other Folder
MyProject.ncor (the Encore project FILE)
MyProject (the Encore project directory)
Other Folders for the Encore project (e.g. Cache, Sources)
You can get the "the folder for this project cannot be found" in various ways.
There have been two recent threads in which the user, by accident or on purpose, changed the folder location or name. You can fix this by renaming the folder correctly or moving it back (or moving the Encore project file to the correct relative position).
Folder was renamed. If you name the folder "MyProjectX" Instead of "MyProject," the project file "MyProject.ncor" can't find it.
Encore project file was moved - or Encore directories were moved. If you move "MyProject.ncor" to some other directory or drive (including inside the folder "MyProject"), it can't find the directory - it is looking one directory level below where the project file is located.
If you delete the Encore project directories, the stuff that Encore uses that projects menus, motion, etc, are gone. While many of its instructions are inside the project file itself, many are not. Some of the deleted material might be recreated (e.g. trying to fake Encore into accepting a copy of a menu), but most cannot.

Final Cut Pro HD project file opens slowly

I have a very large movie project which is connected to about 800 gigs of HD footage split between two Lacie Extreme hard drives. Everything used to open fine, but when I tried to open the project this week, final cut opens fine but then it gets to the "reading project" and it takes an hour just to get to one percent. It did open after 30 hours or so.
I brought my hard drives to a computer lab and the project opened there, although the computer soon ran out of memory. My project files aren't corrupted, and my hard drives seem to be fine...so why is it taking so long for the project to open on my computer?
I've also had trouble copying files from my hard drives to my computer and vice versa. The larger the file, the longer the copying stays at "0%, 1 minute remaining" until it finally starts copying, at which point it is normal. Could this be related?

Thanks for responding.
I found that if I set final cut to play the footage at lower resolution and half the frame rate, the sequences would play without freezing as much, but this doesn't solve the bigger problem.
I have Activity Monitor open and right now it says Final Cut is using 8.4% CPU, with 654.2 MB of Real Memory and 1.76GB of Virtual memory. When I go to "Inspect" and to the Statistics tab, is says "Page Ins: 58398" There are also stats about Shared and Private Memory. I don't know how to interpret any of this.
I don't know that I have CMYK graphics, and what is multi-clip?
My hard drives are 80% and 95% full.
I will try duplicating the project and deleting all but the current version of my sequences. I will also try to use render manager. Are you saying it might help if I delete all renders and rerender what I need?
I did copy one sequence into a new project and am trying to open that now. It is taking a very long time...it will certainly load must faster than the huge project but it doesn't seem to have solved the problem.
Let me know what you think & thanks.

All iMovie projects opening, except for one

I am having trouble opening one particular iMovie project--while all my other projects are opening just fine.
I have the latest version of iMovie HD (6.0.3), and am working on a mirror-front G4 with plenty of Ram and working space (500gb hard drive with 270gb of usable space, 1.5gb of Ram). I have trashed the .plist in preferences and rebuilt permissions--still won't open.
Without having to start from scratch, is there a way to salvage what I have done so far?

When you say it won't open, what do you mean?
Does the program crash, or does it give you a
dialogue box with information as to why?
Also, did you move the project from another disk?
Did you check permissions on the iMovie file?
When I go to open it, I double-click on the iMovie project icon--it starts to open. Then it asks me if I want to view the trash or ignore the trash. I click on either of those options--then the "rainbow candy" cursor just sits there and spins until iMovie quits.
It just crashes or quits with no dialogue.
Did not move it from it origin.
How do you check permissions on a specific file? In the "get info" box? Have not done that.

After renaming and moving to my desktop an iMovie project, i can not open it. I moved it back to iMovie but still it is not working. I noticed that there is not an Event Folder for the project. Can someone help me?

I renamed an iMovie project, then I moved it out of iMovie to my desktop. It did not work from there. Finally I managed to move it back to iMovie, but still does not work. I can't edit it, it does not even appear as an option. I found out that the Event Folder for this Project is gone. Is this the problem? Is there a way I can get it back? Can somenone help me?? Obviously after so many mistakes you can tell I am new on this. Any help will be appreciated it!!!!!

OK Let's take a step back.
If you imported video clips from a camcorder there would be an Events folder in the Movies/iMovie Events/ folder.
You have the option as you import from a camcorder to send your Event to an external drive instead. In this case, it would be in the iMovie Events folder at the top level of the external drive.
If your project has no video clips, but only photos, there may be no events folder, only links to iPhoto.
Similarly, if your camera imported your video clips to iPhoto, and you used the iPhoto event in iMovie, then your clips are in iPhoto, and there is no separate iMovie event.

IMovie won't open any of my projects

iMovie 11 was refusing to open its Titles section for my projects, so I uninstalled and reinstalled it. Now it cannot find any of my projects, although they are located in the correct folder.

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

Is Captivate right for this project?

I am quite familiar with PS, AI, DW, etc., but learned about Captivate today while doing research on presentation authoring software for an upcoming project at work.
I am hoping someone here can tell me whether or not Captivate is a good fit for the project.
We are re-doing a training program. It is a very simple software training program. It is a CD-ROM or DVD-ROM. It has an auto-start/run feature so that it starts up and opens to the main menu upon insertion into a computer. There is a dvd-like menu so that the student can skip around to different sections on the disc. Once a selection is made, a QuickTime video (we don't insist on using QuickTime, in fact some of our students have trouble installing it on their cpu's) plays. The video is surrounded by a frame that includes playback controls (fast-forward, rewind, pause, etc), the company logo, the currenly playing section number and disc, and Menu, Previous, and Next buttons. The videos in the past have been nothing but screen captures with voice overs, but we would like to incorporate PowerPoint-ish slides into the videos if it can be done without having to pay someone to edit the video, as that's not in the budget for this product.
The contractor that did the last one for us is a great trainer, but produced a lower-quality product than we like. I suspect he used a free or very cheap program.
Your thoughts? Does this seems like a project for Captivate?
Bryan

Hi Bryan,
It sounds like this can be achieved in Captivate. Can I ask which version of Captivate you are using?
Captivate allows you to insert FLV videos (or AVI) so you could definetly do the video part without too much trouble. The menu can also be developed in Captivate and it's also possible to publish the entire project to a CD/DVD.
You wouldn't be able to add Powerpoint slides into the videos by using Captivate so you would need to find some form of videoediting program instead.
/Michael
Click here to visit the www.captivate4.com blog

Can you use SQL as a data source for a project in the same way you can in Excel?

Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
the data from the stored procedure as a series of tasks?
Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

No, You can not use sql as a data source for a project.
You have 3 options to achieve it:
1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
kirtesh

Open module for managing property file and environment variables

Looking for an open module for managing property files and environment variables (like CLASSPATH) set in a shell script. For handeling properties (preserving comments, supporting includes, appending new entries, and more) I have looked at SuperProperties from openadaptor but find certain functionality lacking. As for interfacing with common shell scripts/files containing setting for CLASSPATH, JAVA_HOME, other system/application variables another type of object editor is needed. Maybe JFIG?
Any ideas are greatly welcomed.

You seem wright, you hit a brick wall here with Air to find the location
of the command console on windows...
So in fact I never build an exe tool, but this little problem was a nice
case to test it and I tried it.:
I downloaded monodevelop
-GTK# for .NET 2.12.10*
-MonoDevelop 2.4.2*
from http://monodevelop.com/Download
created a console project and had an exe in 5 minutes !
You can download the findconsole tool and the projectfiles here:
http://greencollective.nl/temp/dump/findconsole_monoproject.zip
findconsole.exe will reveal the path/location of cmd.exe on a windows system.
Cheers,
Latcho

Project Pro hangs while opening a schedule from Project 2010 server.

Hi,
We have an issue with opening a schedule from Project server 2010. Project client is not responding. when we try to open schedule in PWA. I am getting unable to open file do you want to open in default view. No matter which view I choose keep getting the
same error. The only view i can see resource view however it will not let me edit. I did notice Project Manager had entered resource names first, last name format which do not exist in our resource pool. We can open other schedule except this particular
one.
Thank you

Obviously, my first thoughts are that this plan is corrupted in some fashion. Entering Resource names differentluy should not cause this issue, they will just not be recognized as Enterprise Resources by the system.
Are you experiencing the issue if you try to open the schedule from PWA? If you are able to open from PWA, try publishing it from PWA and see if it throws any errors.
Also, how about trying it from a different machine?
And finally, it might be worthwhile to check if you have the latest Client Update for Project installed (or atleast matching with the server).
If none fof these work,
a) you could try restoring it from Archive Database (assuming you have a daily schedule backup running)
b) If you are able to open it from another machine, you could use the "Save for sharing" feature to try and resolve any corruption with the schedule itself.
Prasanna Adavi,PMP,MCTS,MCITP,MCT http://thinkepm.blogspot.com

PPro opening slowly for insisting projects

Similar Messages

Maybe you are looking for