PPS dynamic filter creation - not your normal thing but we need a solution, dont think Performance Point can handle it!

My challenge at the moment is that I need to create a dynamic filter. To explain this is a cascading filter but not your normal cascading filter,
ie, Year/Month/day etc.
Here we have a single Dimension, Organisation. It contains every level of a business,
Site,
Dept,
Company name,
Division
Holding
Strategic Area
From these as a default we have 4 built hierarchies with a different combination of the above.
Activity (Strategic Area, Dept)
Organisation (company Name, site, Dept)
Sites (Division, Site)
Holdings(Holding, Strategic Area, site, Dept)
At any given time we have have additional Hierarchies created within the Dimension, further adding to the hierarchy list.
We now have a challenge where we require our users to be able to in the first filter select the Hierarchy they want to use, ie, Holdings, Site, Organisation
or Activity. This should then cascade to the second filter and contain the relevant hierarchy and levels as a multi select filter. Of course this also needs to be connected to number of graphs, charts and scorecards on the page, dynamically.
I have gone around the houses to get this to work but not having any luck. Tried the variety of filters available, MDX, member selection, tabular,
SharePoint, and attempted to mix and match to get this to work. I cannot find a way but I don't believe this is not possible.
If it is not possible we must look around for another front end solution for our BI Dashboards which I would prefer to avoid. Any response or suggestion
would be much appreciated.
Regards,
Sheb

Hi Sheb,
Please check the articles below and see if cascading filter in PerformancePoint Dashboard can be help:
http://technet.microsoft.com/en-us/library/hh272541(v=office.15).aspx
http://www.dotnetcurry.com/showarticle.aspx?ID=872
Regards,
Rebecca Tu
TechNet Community Support

Similar Messages

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
The following might work, but you will not know until you try.
Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
(What is the difference in the 2 -- one is about twice the price of the other…)
http://www.apple.com/wifi/

My iPad has been stolen. I Do NOT have iCloud account but I have apple ID and serial number. Can i locate it with these available options?

My iPad has been stolen. I Do NOT have iCloud account but I have apple ID and serial number. Can i locate it with these available options?

Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
 Cheers, Tom

HT5312 i tried purchasing an in app thing but i need to kno security questions but i dont remember ever setting any how to i check them?

i tried purchasing an in app thing but i need to kno security questions but i dont remember ever setting any how to i check them?

Have you find out? I have same problem.....

I'm trying to download what's app chatting application and the massage given (need your secret answers for the below questions to proceed your purchase request ) but the problem is I forgot my answers :((( how can I reset the questions and the answer ????

I'm trying to download what's app chatting application and the massage given (need your secret answers for the below questions to proceed your purchase request ) but the problem is I forgot my answers :((( how can I reset the questions and the answer ????

Visit this site: http://support.apple.com/kb/HT5312

I apologise in advance if this is not the right forum, but I need to do a reformat on this computer. My question is, after deactivation of CC, PS, LR and Bridge do I need to uninstall them as well?

I apologise in advance if this is not the right forum, but I need to do a reformat on this computer. My question is, after deactivation of CC, PS, LR and Bridge do I need to uninstall them as well?

If you are going to reformat the hard drive, wiping out all data on the computer, there is no need to uninstall. Deactivation is enough.

Not your normal grey screen of death . .

Hi all –
Something’s crapped out on my first Gen 8 core Mac Pro and I need rescuing. I come to you after about 4 hours of trying everything the Internet has to offer. Here’s what’s up –
Machine froze with a spinning beach ball. Tried to reboot,got the apple logo with the spinner underneath it, just at the point when the spinner stops spinning for a second, and you expect it to go through blue screen to your desktop pattern, it just went to a light grey screen with some blocks of thin colorful lines arranged in rectangles across the screens – (I have 2 screens).
Not good.
Here’s what I’ve tried.
First, tried booting from Diskwarrior disk and then Snow Leopard disk – same thing. So it’s not my system disk (snow leopard), but just to be certain, I hooked up the Mac Pro to my laptop in FW target disk mode – all the drives showed up, and I could run disk repair from the laptop on the mac pro’s drives – minor errors needed fixing on the system drive but basically everything was ok, so at least my disks are good.
Reset the PRAM – many times. No joy
Booting in safe boot mode.
Took out the power chord, waited a minute – put it back in. Nada
Disconnected all peripherals except mouse and keyboard.
Tried one monitor at a time. Here I got a little something.With just one monitor hooked up, no funny blocky patterns, just grey screen. So that’s something different.
Took out all internal drives except startup drive.
Took out and reseated the video card.
Tried taking out RAM modules a pair at a time, and here something happened. I have 9 gigs of RAM, 1 gig that came with the machine and 4 x 2 GB DIMMs (?) Removing ANY combo of RAM from the machine, the behavior at boot up changed somewhat. After a while of grey screen, the monitors would suddenly shift to blue screen, but just when my hopes were got up, it would flash back and forth before settling back on light grey screen of death. At this point I would generally have a working cursor, usually spinning beach ball, sometimes regular pointer, which I can mouse around with. Also pressing the volume buttons on the keyboard would give me noise, but just for one go round, then that stopped working.
Put all the RAM back in, and it’s back to the grey screen with blocky patterns, and no blue at all. In all cases, the hard drive is trying to get me going for a few minutes before it gives up and relaxes.
So that’s where I’m at. I’m hoping someone will tell me I need a new video card – not too expensive. But if that was the case, would I be able to see the apple logo at the beginning – or the shifting Target Disk mode icon? The display is fine at those two times. My instinct tells me the logic board is ok, or else how could I boot into target disk mode, and would the boot process even get as far as it did? wishful thinking?
Any clues anyone?
If I don’t respond,immediately it’s late here on the East Coast, and i may have to crash, but all help is gratefully received . .
Regards and thanks
Malcolm
Message was edited by: malcolm payne

Hi hatter – thanks for your input
A corrupt hard disk can prevent booting from CDs and DVDs.
So I took the boot drive out and tried booting from my snow Leopard DVd – no go.
You say "boot from Disk Warrior." I never boot from a DW CD.
Well, it is the recommended way of repairing a directory using disk warrior. One absolutely can boot from a DW DVD. But at this point i don't think it's a directory problem.
You saying that you don't have clones of your drives?
You don't have a small emergency system drive / volume used justfor maintenance?
I didn’t actually say, but I have time machine backups of everything, and a less than totally current clone. No I don’t have a small system drive. Whenever I’ve had system issues in the past I’ve always been able to boot from the OS DVD.
UPS? they help in many ways. Not sure what or why it froze outof the blue, but when that happens even though you said "minorrepairs" I do NOT TRUST Apple's Disk Utility in such situations.
Actually I didn’t mention anything about a UPS either, but for the record, yes, I do use one.
Keep the OS only on the boot drive. Have spares and backups youcan boot from and use.
Boot with only a new drive or none and see if 10.6.x DVD worksthen.
See above
Get out your OEM DVD and run Apple Hardware Test (it is on thelabel, hold down "d" on startup)
Well, I found “a” version of AHT dated 2007, which is before my Mac Pro, but it did work, give an accurate profile, and returned Test Results –“No trouble found”
One more point – I was able to network and use screen sharingfrom my laptop. My thinking was that if I could see the mac pro desktop from mylaptop it could well be a bad graphics card. Using “Chicken of the VNC” I couldconnect to the Mac Pro – chicken returned a black screen, but I could controlthe cursor (which was usually a spinning beach ball) from the laptop. This hasme flummoxed at this point.
Start using CCC or SuperDuper and plan on investing in a coupledrives unless you actually have some good drives you can rely on and put intoservice. Fresly zeroed preferrably.
Pretty sure at this point that the drive is not at fault, but I do need to use CCC more often. I have backup drives for everything - 8 drives in all . .
thanks for your help . . hatter . .

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

I don't remember my iCloud username that was used when I set up my Iphone4s. I know my apple ID but that is not the same thing. I need it to activate my phone.

I don't remember my iCloud username that i made when i set up my Iphone 4s. i do know my apple ID but according to my phone, it's not the same thing. When I sign onto icloud on my computer, it allows me to use my Apple id. Not on my phone though..

Dear Apple Company.
My name is Nguyen Tran Dai from Vietnam.
i beg you Apple People can help me and understand my situation.
i love Ipad, and dont have much money to buy a brand new so i had to buy a second hand
i bought it from a Vietnamese girl by searching chotot.vn apps on internet on an android phone.
we met together at a coffee shop. i test ipad air run very well, so i paid her 8 million 400 vnd. and i checked her icloud account, i have seen nothing so i didn't restore it at that time.
when back home i restored it and it appeared the owner's account that asking me to sign in '' kich hoat ipad", i couldn't, i tried to give her many calls but she didn't answer me. now i feel i am tricked by her.
i just quickly run to Apple store in Saigon asking people for help, but they said if i have something to improve that is my ipad, sorry, i do not have anything, when i bought it from that girl i asked her the received she said she lost it , and her box she left in her countryside far away from Saigon.
now i see i am stupid and not good for technology, trust me , i love icloud as i have heard many people say it's good. but now i feel that is not good. i lost my money which i saved such a long time.
my ipad infos is
serial DM******FK15
model A1474
XU1***93-13003
PLEASE help me
my phone number in Vietnam is +******
now i feel sorry for my money gone easily because of me dont know much about ipad.
<Personal Information Edited By Host>

I´ve bought the new IPad3, what a disappointment the 3G does not work, no Internet available, APPLE what are you doing for the all the people in Germany who bought the new IPad3? I´m still an Apple fan, all my products are from Apple but I need a solution

I have been waiting since months for the new IPad4G 64 Gbt. ON recommendation of Apple Support I have changed my IPad 4G last week in the hope that something was wrong with the firts one I bought.
The one I have now has the same problems. WiFi is working however 4G not at all. Apple what can I do? What are you doing for the thausands of German Apple fans who have bought a IPad4G and can not use it. We need a solution NOW. I´m working with this tool and need to be able to rely on it.
Thanks for a feed back.

JKerki wrote:
They had not heard about the problem, however made no problem to change it for an other one. Apple Support Germany pretendet not to know about this problem. However the web is full of complaints.
It would be advisable for Apple to react officially on it. € 799, - for something that doesn´t function is no fun :-((
Isn't replacing your iPad Apple "officially" acting on it?

HT6015 After successfully signing up for Apple's VPP, I went in to purchase apps, and the only distribution method available is "managed distribution". Our company does not have a MDM so I need the Redeemable Codes method. Where can I find once I log in

After successfully signing up for the Apple Volume Purchasing Program, I went in to purchase a quantity of apps. The only distribution method that was available was the MDM. Our company does not have a MDM. I need redeemable codes. How do I get that option? I am using a PC.

Can I add my existing, licensed apps to my list of 'Purchases' on the Mac App Store so I don't have to buy them twice?
No. Only apps purchased from the App Store can be re downloaded for free including updates.

Product number for the connector to purchase to connect ipad 2 to the tv. Not the Apple TV but I need the connector product number to buy.

Aapple Customer service,
Could you please give me the cable/connector part name and part number to order for hooking up my Ipad2 to the TV.
NOT the Apple TV but just the cable/connector that hooks to the HGMI cable?
Thanks

You need the Apple 30 pin Digital AV adaptor:
http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter?fnode=3a

IPad 3 charging issue... not your normal USB complaint.

So I took the plunge into iPad world and got the 64 gig Verizon 4g version. The night I got it ( Tuesday ) after playing with it for a while, I tried to plug it in overnight to charge it with the AC adapter. It wouldn't give me the charging acknowledgment on screen in the first two wall outlets I tried, finally plugged it into a surge protector and it worked. This being my first iPad I thought maybe it was being finicky about the power. Faster forward to this morning, I forgot to plug it in overnight, and tried every outlet and surge protector in the house, to no avail. I plugged it in using the same cord minus the AC adapter to my PC and got the "Not charging " Message. ONLY after doing this was I able to get this thing to start charging using the AC adapter.
So my question is this.... Is this normal? I really don't want to have some modified OCD dance everytime I need to charge this **** thing.
Is it the iPad itself acting up, which I suspect, or the USB to AC 10w adapter?
Again, first time owner so be gentle.

Sometime the iPad will not indicate it's charging, when using the AC adapter, for the first 15-20 minutes.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
 Cheers, Tom

Not your normal How to Transfer issue

I am buying three iPod's for nieces and a nephew for christmas and I am wanting to add off of my CD (not an iTunes bought one) so they have something to listen to christmas morning. Now what I don't know is how does this effect them taking them home and using a different version of itunes?
Macbook Pro Mac OS X (10.4.8)

It doesn't. They will be using the same version as you but that doens't really matter.
When they get home, load iTunes and plug in the iPod.
It'll ask to use sync the library on this computer to this iPod.
Just slect Yes.
This will tell iTunes to use the library on their computer as the library for their iPod.
It'll erase what you put on the iPod and load what they have in iTunes onto their iPod.

Mail app is blank. I can not see any thing but a blank page with blue lined format. It does not shut down either. It just blinks out after a few seconds and the icon is there alone on my home screen then everything goes black and my home screen comes

MY Mail app does not respond in anyway to anything. The icon shows I have over 300 emails but I have no access to them. When I tap on the Mail icon a blank white page comes up with the blue format lines. No emails, no inbox, nothing, not a single letter of the alphabet is there. Within a few seconds it blinks out and I see the icon and my home screen. Soon it just blinks out to black. I am left with the icon at the bottom center of the screen. I have no way to shut it down. I have no access to the emails (300) in my inbox. All that is happening is my memory is getting filled up with emails. I would appreciate any solution to this problem barring deleting my email set up in settings.
if I have to resort to that I will, in the meantime I am hoping for a different resolution. Thanks everyone, you are all amazing and greatly appreciated. Sincerely, Diane.

Hey There Diane,
If I'm understanding your situation, you've got an iPad running iOS 6.1.3 and the Mail app is not working. I understand you don't want to remove and re-add your email account.
The first thing I would suggest is to make sure your iPad is backed up to iCloud or iTunes.
Do you have an iMAP or a POP email account? When you go online to your email service provider's website, are you able to access the 300 emails in your inbox?
Since the Mail app is part of your iOS operating system, upgrading that software to the latest version, which is 8.1.3 may resolve this issue.
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
http://support.apple.com/en-us/HT201398
Try these steps if you have an unresponsive app on your iPhone, iPad, or iPod touch.
Restart the app
Close the app and open it again.Restart your device
Turn your device off and back on.Check for iOS and app updates
Make sure that you're using latest version of iOS.
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password.
You might need a Wi-Fi connection to update some apps.
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update the iOS software on your iPhone, iPad, and iPod touch
Learn how to update your iOS device wirelessly or using iTunes.
iOS software updates introduce new features that let you do even more with your iPhone, iPad, or iPod touch. Be sure to keep your devices up to date so that you don't miss out on the latest features.Before you update
Back up your device to iCloud or iTunes.
If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.Update your device wirelessly
The easiest way to update your device is wirelessly, also called “over the air.” Here’s how:
Plug in your device to a power source.
Tap Settings > General > Software Update.
Tap Download and Install. Updates might download automatically while your device is connected to Wi-Fi and a power source.
Tap Install, or tap Later to install the update later. If you use a passcode, you'll need to enter it before installing the update.
If you have some free space, but not enough to update over the air, you can either update using iTunes or delete content manually from your device. Whether you use iTunes or update over the air, you'll have the same amount of free space on your device after you update.
Some iOS software updates aren't available as over-the-air updates. VPN or proxy connections might prevent your device from contacting the iOS update servers.Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Hope this helps ...
- Judy

PPS dynamic filter creation - not your normal thing but we need a solution, dont think Performance Point can handle it!

Similar Messages

Maybe you are looking for