PR 1.2! Now you can stream media from a pc

now you can stream media from a pc but  pr1.1 u couldnt all it was ;black screen n audio.

It was always there. the only thing you needed to do this was to enable this from your PC via any software. i was using Sony home media and was always working fine
Owned Nokia 5110, Nokia 8210, Nokia 8250, Nokia 6610, Nokia 6820, Nokia 9500, Nokia E50, Nokia 8800 , Nokia E71, Nokia N91 4 GB, Nokia N95, Nokia N95 8GB, Nokia N97, iPhone 3GS & finally Nokia N900,Nokia X6, Nokia E55, BB BOLD 9700, iphone 4, Nokia N8; BB Pearl 9100, HTC Legend, & Now Nokia N9. (N900 is the Best)

Similar Messages

  • WRT54GS cannot connect to windows media center with xbox360/can stream media from PC to x-box

    - running win XP MCE and set up xb 360 on  wireless router WRT54GS  updated from V1 to V 4.71.4 .  PC  wired to  router and  DSL signal  goes by wire from wall to modem, router, PC.  I can   stream media through xbox but not make the WMC connection.  I still get the"xbox360 not found on network".  I have gone through x-box set up page and installed the setup files.  I excluded  windows firewall as a problem.     I can connect to Xbox live and  xbox live/media tests on the xbox run w/o any failures.

    Thanks for your reply   Yes, I can connect to Xbox live from x box w/o diff.  It seems that the xbox can "see" the PC but the PC cannot "see" the xbox.  My PC is XP not Vista.

  • Now you can SEND MMS from the iPhone!!! (UK Only)

    There is a WebApp called 'O2mms' (http://o2mms.net) which has been out for a while that allows O2 iPhone users to view MMS messages that have been sent to their phone without going through the long process of the O2 Portal.
    This has just been updated so that O2 iPhone users can now SEND MMS from their phone via the native Mail.app on the iPhone.
    It works out at around 37p per message, but the creator, Ross McKilliop, is working at bringing the price down (you pay securely via PayPal from your iPhone)
    I have tried and tested it and am happy to recommend it

    There is a WebApp called 'O2mms' (http://o2mms.net) which has been out for a while that allows O2 iPhone users to view MMS messages that have been sent to their phone without going through the long process of the O2 Portal.
    This has just been updated so that O2 iPhone users can now SEND MMS from their phone via the native Mail.app on the iPhone.
    It works out at around 37p per message, but the creator, Ross McKilliop, is working at bringing the price down (you pay securely via PayPal from your iPhone)
    I have tried and tested it and am happy to recommend it

  • Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv?

    Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv? I have a sony bravia 600 series and 700 series and a home theatre( sony 7100 series)

    The only way to stream directly to your TV would be if it is an AirPlay-enabled device.
    There are many AirPlay-enabled devices but I am not familiar with Sony's products. If yours do not specifically indicate AirPlay capability, then you need an AirPlay-enabled device such as an AppleTV connected to your Sony TV or Sony AVR.

  • Is there any app or something, that can do that, you can stream any sound coming out of your mac to your airport express?

    Is there any app or something, that can do that, you can stream any sound coming out of your mac to your airport express?

    Yes, he would have to have jailbroken your phone to install malware. If you see an app called "Cydia", that would indicate conclusively that it was jailbroken. I would recommend restoring the phone as new using iTunes. It is your best shot at removing a jailbreak.
    You should also change your network password, your email password and your FB password as well as passwords to anything else you've used from the phone. Put a lock code on the phone.
    Your best defense against this sort of thing is to NOT give your phone to people you don't trust.
    This is a user-to-user forum, by the way. Apple employees don't participate here. If you want to talk to someone from Apple, make an appointment at the Genius Bar at your local Apple Store.

  • I want to stream media from a NAS drive connected to my Time Capsule.

    I recently bought the Time Capsule to serve as my backup and my wireless router.  Both of my Macs are now using it via Time Machine.  I now want to move my large ITunes and IPhoto databases from an external hard drive on one Mac to a network drive where I can stream/view from either Mac.  What is the best way to do this? 
    1.  Buy a NAS drive with just ethernet and connect to one of the three port on the Time Capsule?  If so, what is the best drive to buy?
    2.  Use a USB drive and attack to the USP port on the Time Capsule?  If so, will any USB drive work?
    3.  Other?

    maxlemke wrote:
    1.  Buy a NAS drive with just ethernet and connect to one of the three port on the Time Capsule?  If so, what is the best drive to buy?
    i recently moved my iTunes library to a NAS. i'm very happy with performance.
    have a look at this discussion.
    as for iPhoto, all i have is a link to a recent discuss over atthe Apple TV forum but don't know how relevant it is: https://discussions.apple.com/message/15366429#15366429
    2.  Use a USB drive and attack to the USP port on the Time Capsule?  If so, will any USB drive work?
    as long as the drive is properly formatted, yes. you may need to use a powered USB hub. the USB connection may or may not be a bottleneck as compared to full gigabit speed of the NAS.

  • Streaming media from PC to XBOX 360 via BT Router ...

    Hi,
    I've just moved house, I used to be with SKY BB and I've never had any issues streaming media from my PC to my XBOX.
    I have tried everything I can think of (I have even restored my PC) but then I realised that the only thing that is different is my router?
    I'm connected from the PC to the router via WiFi
    My XBOX is connected via a cable directly into the router.
    But the XBOX can not detect the PC
    But my PC can see the XBOX
    'My Videos' - 'My Music' - & Media Centre does not work on the XBOX
    (Yes, all of my folders are shared, in the past I have done this 100's of times)
    am I missing something? Is there a setting on the router that needs changing??
    Many Thanks
    Ben

    The IP subnet for the home hub is different than your Sky router, so you may need to make some changes to your device settings.
    If its a home hub 4, then this thread may also help.
    http://community.bt.com/t5/Other-BB-Queries/Home-Hub-4-and-DLNA/m-p/916098#M56871
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Streaming media from wireless external hard drive and MBP to TV?

    Hi everyone. I have a retina MBP and have recently bought a Sony Bravia smart tv with wireless. I have a time machine (the new one) with an external hard drive connected to it with all my media, photo, movies etc. My tv is connected to my wireless from the time machine and I'm wondering how do I stream media from my external hard drive to my tv? And how do I stream media from my MBP to my tv wirelessly? I can't seem to figure it out. Also mirroring my MBP desktop to my tv wirelessly, can it be done without an apple tv? Thanks in advance.

    I had the same issue. It was due to the appalling performance of the USB connection to the disk, not any issue with the wireless connection itself. My iMac was within 7m of the router, on the same floor, with a clear line of sight and good reported connection speed. I have the latest late-2009 version of the AEBS running the 7.5 firmware. This has loads of performance problems (read these forums). I'm hoping that Apple will release the new firmware (7.51) for download soon and then the issue may be resolved.

  • I installed Zune and now I can't play from my iTunes account.  Why?

    I installed Zune and now I can't play from my iTunes account.  Why?  How do I fix this?

    - Did you try here:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - If they were rentals and you have a 4G iPod, they will not transfer to your computer.

  • HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

    My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

    If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
    The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago.  I changed my iTunes password about 10 months ago;  but apparently, the backups continue to use the password that existed when the phone was first set up.
    A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password. 
    I thought iTunes and Apple were smarter than that.  With so many posts stating exactly the same problem, it is clear that this is bug in the software. 
    Best,
    Craig

  • HT1595 I have 2 Apple TV's one the oldest works fine the 2nd one refuses to recognise the MacBook Pro its connected to but I can play media from the MacBook on the Apple TV from iTunes, help?

    I have 2 Apple TV's one the oldest works fine the 2nd one refuses to recognise the MacBook Pro its connected to but I can play media from the MacBook on the Apple TV from iTunes, help?

    Sorry, content bought with one Apple ID cannot be merged or transferred to another Apple ID.

  • Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

    Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
    thank you

    Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
    Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
    It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
    How will the script determine where the author's name begins and where it ends?
    How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
    How will the script recognize the year of publication?
    For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
    Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
    Best of luck.
    Regards,
    Barry

  • PE4-Win7: Please run this program from the Administrator account so it can set up your license. Once the license is set up, you can run it from any account.

    Hi,
    I'm using Premiere Elements 4 in Windows 7 (64 bit). When I launch PE I get the following error:
    Please run this program from the Administrator account so it can set up your license. Once the license is set up, you can run it from any account.
    Any idea how to solve it?

    I came across this link online. Please check it out and decide if it will or will not advance your case.
    http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/
    ATR

  • HT2736 How do i just send a song, not a hole album from my itunes on my iphone. You can do it from my computer but not my iphone.

    How do i just send a song, not a hole album from my itunes on my iphone. You can do it from my computer but not my iphone. Please help. if there is not solution then someone should fix this!

    It's not currently possible to gift a single song from an iOS device, you can only gift albums.
    If you want to leave feedback for Apple (these are user-to-user forums) then you can do so via this page : http://www.apple.com/feedback/iphone.html

  • Can anyone tell me if you can back save from CS6 to CS5 Illustrator, Indesign and Photoshop OK?

    Can anyone tell me if you can back save from CS6 to CS5 Illustrator, Indesign and Photoshop OK? Want to upgrade to CS6 but must I must still remain compatible with work. They are using CS5.

    To clarify your answer for Illustrator.  The option is not in the "Save As" dialog box.
    The correct answer is
    Open you CS6 Illustrator file.
    File>Save As 
    The Save As dialog box opens
    Type your file name (DIFFERENT THAN ORIGINAL PLEASE!) and the Save as Type is still going to be Adobe Illustrator (*.AI)   **This is where the above instructions threw me, as the Save as type drop down does not list anything about versions to save fo)
    Click Save
    Once you click Save, the Illustrator Options dialog box will come up.  The first option is titled Version and has a drop down menu.  Select the version of illustrator you want to save your file as here, then click ok.
    Your done.
    I strongly suggest you give this file a different name than your original CS6 Illustrator version as you may lose some parts of your design in the conversion.
    Hope this helps.  Enjoy!

Maybe you are looking for

  • Re: Satellite Pro L - How to update drivers?

    I found this site, found the driver update page for my laptop, and it said there were 61 updates available, and there was the wonderful long list. The problem is, no matter what icon or word I click on, I can't find out how to download them. Maybe it

  • Get document from DMS to VB

    Hello, does anyone know how to get the document from DMS to a local drive, while using VB Code (with SAP Connector) or .NET? I tried to use the 'CVAPI_DOC_CHECKIN' but it didn't work. maybe it's the wrong function to use... I've also tried to examine

  • How to get the user entered  header text on a delivery

    Hi All, I am looking for a internal table which holds the user entered text in header text of the delivery. I was able to find header data in XTHEAD table. But actual lines(entered text)  in which structure it holds. I checked TLINETAB but its empty.

  • Cf_dev2 and PaulH ,help me,about the javadbf,thank you.

    I have an other problem with javadbf. Now i can read dbf file with javadbf,But i can not write dbf file, i don't know Java code below. import com.linuxense.javadbf.*; import java.io.*; public class DBFWriterTest { public static void main( String args

  • Setting up SAP Router for SNC ... error...

    Hi, My SAP Router is installed on a server that is Linux based. (IP address is 10.11.0.24) I'm not sure if is saprouttab or saprouter itself having issue. I started the saprouter via this command: saprouter -r -G routerlog -W 60000 -S 3299 -K "p:CN=X