PR_ACCEPT() failed -5987 and directory start
Hello,
I'm working on Solaris 2.8 and Directory Server 4.12.
Immediately after directory start, I found the following message in errors log file : PR_ACCEPT() failed -5987. I thought this message was a misreported error, and the real error should be PR_ACCEPT() failed 5971 (process open FD table is full).
ulimit -aH launched on my server returns 8092 for the maxdescriptors value; this parameter is set on 4096 for the Directory Server.
Could it be possible that immediately after start that this value is reached? Does anybody have an other explication?
Thanks for your responses,
Regards,
Thomas
Hello,
I'm working on Solaris 2.8 and Directory Server 4.12.
Immediately after directory start, I found the following message in errors log file : PR_ACCEPT() failed -5987. I thought this message was a misreported error, and the real error should be PR_ACCEPT() failed 5971 (process open FD table is full).
ulimit -aH launched on my server returns 8092 for the maxdescriptors value; this parameter is set on 4096 for the Directory Server.
Could it be possible that immediately after start that this value is reached? Does anybody have an other explication?
Thanks for your responses,
Regards,
Thomas
Similar Messages
-
Hello Everyone !!
I see this error notice
[20/Dec/2002:12:11:22 +0700] - PR_Accept() failed, error -5987 (Invalid function argument.)
[20/Dec/2002:12:11:33 +0700] - PR_Accept() failed, error -5987 (Invalid function argument.)
[20/Dec/2002:12:11:33 +0700] - PR_Accept() failed, error -5987 (Invalid function argument.)
on my error log files .
I used Netscape Directory ver 4.16 on Redhat 6.2 on x86 platform.
Can you tell me what the errors mean ?
Thank alot
TrungUsually means you are running out of system resources e.g. not enough file descriptors, not enough TCP connections. Please review your kernel tuning parameters to see about increasing them.
-
Starting single sign-on and directory service
i am trying to install oracle 9i infrastructure on my clean win2000 box with 2.4 GHz proc and 1GB RAM.
i am getting falilure messages for the following:
infrastructure instance configuration assistant: failed
oracle 9i application server randomize password: failed
single sign on configuration assistant: failed
infrastructure mod-osso configuration assistant: failed
OPMN configuration assistant: failed
log file says:
Configuration failed for IAS
IAS Instance creation failed
Configuration failed for JAZN
JAZN configuration failed: unable to establish a directory context.
Configuration succeeded for IASProperty
Configuration failed for IAS
Configuration failed for JAZN
after which single sign-on and directory service dont start. which means no connectivity :(
can somebody please guide me about how to avoid this failure in installation or how to manually start these after installation.
it would be a great help
ashishHi,
we're having exactly the same problem.
Could you tell me what the problem is with the network ?
You say configure it properly but what do you mean ?
It's installed on a Windows 2000 Server machine, it's own DNS.
Thanks,
Yuri Arts -
When I click on Firefox the first time it says "Foxfire is installing your updates and will start in a few moments…. (with a green bar)" then it says "Software Update Failed (in blue) with an exclamation mark inside a yellow triangle)
The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." When I click the ok, Firefox opens up. If I open another Firefox window with the previous one still running, it doesn't give me any of these messages, it just opens normally.
== This happened ==
Every time Firefox openedIf you can't install on top of the current installation then you need to delete or rename the current Firefox program folder to do a clean install.
It is possible that your security software is using or locking files, so you can try to temporarily disable that software during the installation. -
Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?
Is it a USB hard drive? USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice. Double check your profiler to make sure that is not a problem. If it is Firewire, make sure there aren't other firewire devices in use at the same time. I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.
-
premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?
Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update. -
Cannot start SAP XI - Integration Respository and Directory
Dear Expert,
Some of developers cannot start Integration repository and directory at his/her client. It still running after logon with "PISUPER" user.
Do I missing some necessary applications on the clients?
Please advise.
Thank and regards,Thanks for your answer, Alexander Bruch,
I think the host name is no problem because the Integration Builder page can be started with URL "http://iwdfvm2160:51000/rep/start/index.jsp" and also prompt me the logon window. But after input the user/password, normally is PISUPER, the logon window is running for a long time, nothing happen.
We also using user PISUPER and it's fine with another laptop.
Regards,
Kobsak -
My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.
hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result -
Open Firefox and navigate to web site. Try to save to bookmarks and get the "assertion Failed" message and "Assert: parent node must have _DOMElement set" followed by a list of 8 (0-8) items.
Try the Tiny Menu extension. I am using an older version of Tiny Menu on Lucid with Firefox 3.6.x and it works fine.
-
Partition failing and auto-starting
Hi,
Can anybody help regarding this problem
We have problem in our production environment regarding the partitions.
one of our partition(partA) crashing and auto starting frequently.
We were not getting any information (exceptions) in the log files.
We set some flags(memory and user defined) and checked the log files
eventhough we haven't got any messages or exceptions.
The partA having 3 Service Objects doesn't have DB conections.
Client partition will call this partition(partA) and from
here it will go to
the another partition(partB) to talk with database.
The partA doesn't have replicates and
partB has 6 replicates.
All Server partitions running on UNIX
Client Partition running on NT.
Forte 3.0.M.7
Thanks,
Satish.@Gran
If you have carried out a FOTA update, re-installing existing device software upon N9 with http://betalabs.nokia.com/trials/nokia-suite-beta can be worth a try, sign in with Nokia ID & password.
Happy to have helped forum with a Support Ratio = 42.5 -
I've done the adprep32 on 2003 server standard for /forestprep, /domainprep, and /rodcprep without an error, as instructed by several docs on web. But in final stage of dcpromo on 2008 server standard, it fails with
Active Directory Domain Service could not replicate the directory partion CN=Schema,CN=Configuration,DC=domain,DC=local from the remote Active Directory Domain Controller Old-DC.
"The filename, directory name, or volume label syntax is incorrect."
I've found several docs online, but non-helped. After about 20 hours of numbing fingers, I found docs to manually move DNS and DHCP from 2003 server to 2008 server. But the Active Directory on 2008 server won't start because I can't get that
DCPromo to finish.
Is there a way to manually move the login ID's and passwords to 2008 server and activate the Active Directory Service?
Thanks.I've already looked at it, and used it to google. Tried every suggestion I could find. Below is snippet of the file:
09/18/2014 19:53:26 [INFO] Creating the NTDS Settings object for this Active Directory Domain Controller on the remote AD DC NT-FS1...
09/18/2014 19:53:26 [INFO] Replicating the schema directory partition
09/18/2014 19:53:26 [INFO] Error - Active Directory Domain Services could not replicate the directory partition CN=Schema,CN=Configuration,DC=domain,DC=local from the remote Active Directory Domain Controller NT-FS1. (123)
09/18/2014 19:53:26 [INFO] EVENTLOG (Error): NTDS General / Internal Processing : 1168
Internal error: An Active Directory Domain Services error has occurred.
Additional Data
Error value (decimal):
-1073741823
Error value (hex):
c0000001
Internal ID:
300162a
Hi
can you navigate to the following log file: %SystemRoot%\Debug\Dcpromo.log let us know what it contains. -
Hi all,
I install iplanet Directory Server5.1p1 on Solaris 8. These errors fill full in my error log files
"PR_Accept() failed, error -5971 (Process open FD table is full.)"
I use idsktune tool and detect i face the problem file descripton. I have increase to 4096 ( in /etc/system file and ulimit -n 4096), but these errors still exist in my error logs.
Who know this prolem, pls give us a solution to fix this errors
Thank alot
Best RegardsI suggest you try the Directory Server forum.
-
How can I go about determining exactly which resource was insufficient? Or has anyone encountered this and has an idea of typical reasons?
With about 1000 connections this morning, I saw this in the log:
PR_Accept() failed, error -5974 (Insufficient system resources.)
Our setup:
iPlanet Directory Server 5.1
HPUX platform - 6 gigs ram, dual 100mb nics, plenty of disc space.Thanks Gary. I was going to set the ulimit and the hard and soft limits on the OS. I had done this before on a Solaris system, but with HP, I'm not sure where the equivalent of /etc/system is. I may have to check with our HP guys.
BTW, here's the output of idsktune. I don't see any warnings for only 64 threads being available. We are going to try 5.2 Patch 4, but we cannot apply it in this environment yet -- still doing a POC. Thanks!
$ ./idsktune
Sun Java Enterprise System platform tuning analysis version 12-DEC-2003.
Copyright 2002-2003 Sun Microsystems, Inc.
NOTICE : System is hppa2.0/644-hp9000/800/rp3440 -hpux_B.11.11.
NOTICE : The tcp_keepalive_interval is set to 7200000 milliseconds
(120 minutes). This may cause temporary server congestion from lost
client connections.
NOTICE : The NDD tcp_smallest_anon_port is currently 49152. This allows a
maximum of 16384 simultaneous connections.
NOTICE : ndd settings can be placed in /etc/rc.config.d/nddconf
WARNING: Only the superuser can check what patches are installed. You must
run idsktune as root to ensure necessary patches are present.
NOTICE : The following patches might not be installed:
Patch PHCO_24402 "libc cumulative header file patch".
Patch PHCO_26061 "s700_800 11.11 Kernel configuration commands patch".
Patch PHCO_27632 "initialised TLS, Psets, Mutex performance", which supercedes PHCO_26466.
Patch PHCO_27740 "libc cumulative patch".
Patch PHCO_27958 "mountall cumulative patch", which supercedes PHCO_24777.
Patch PHKL_24751 "preserve IPSW W-bit and GR31 lower bits".
Patch PHKL_25233 "select(2) and poll(2) hang".
Patch PHKL_25468 "eventport (/dev/poll) pseudo driver".
Patch PHKL_25993 "thread nostop for NFS, rlimit max value fix".
Patch PHKL_25994 "thread NOSTOP, Psets Enablement", which supercedes PHKL_24253.
Patch PHKL_27094 "Psets Enablement Patch, slpq1 perf".
Patch PHKL_27316 "priority inversion and thread hang", which supercedes PHKL_25367.
Patch PHKL_27686 "MO 4k sector size; FIFO; EventPort, perf".
Patch PHKL_28122 "signals, threads enhancement, Psets Enablement".
Patch PHKL_28267 "Required for large heap on SDK 1.3 and 1.4 VM-JFS ddlock, mmap,thread perf, user limits".
Patch PHNE_28089 "cumulative ARPA Transport patch".
Patch PHSS_26560 "ld(1) and linker tools cumulative patch".
Patch PHSS_26971 "Japanese TrueType fonts".
Patch PHSS_26973 "Korean TrueType fonts".
Patch PHSS_26975 "Chinese-Simple TrueType fonts".
Patch PHSS_26977 "Traditional Chinese TrueType fonts".
Patch PHSS_28370 "X/Motif runtime patch".
Patch PHSS_28470 "X Font Server SEP2001 Periodic Patch. Common patch for Asian TrueType fonts.".
NOTICE : Patches are available from http://us-support.external.hp.com/
WARNING: largefiles option is not present on mount of /opt,
files may be limited to 2GB in size.
Any ideas? -
JDS and Gnome start, but all applications become fixed in upper left hand
Problem:
Java Desktop and Gnome start, but all applications are fixed in the upper left hand corner and become stacked on top of each other.
Multi-panel JDS does not start up, and I am forced into one window, which makes the above problem critical.
Conditions: New installation (not an upgrade) I experienced this problem. Attempted to connect from SGD. Using the following command
/usr/dt/config/Xsession.jds
Environment Variable: LD_LIBRARY_PATH=/usr/openwin/lib:/usr/dt/lib
ERROR MESSAGE:
There was an error starting the GNOME Settings Daemon.
Some things, such as themes, sounds, or background settings may not work correctly.
The Settings Daemon restarted too many times.
The last error message was:
Child process did not give an error message, unknown failure occurred
GNOME will still try to restart the Settings Daemon next time you log in.
SOLARIS Version:
SunOS ITK-EDS1-IS 5.10 Generic_137137-09 sun4u sparc SUNW,Sun-Fire-V210
Window Manager:
Sun Java Desktop System, Release 3
Build Date: 12/15/04
After Problem Encountered I did the following:
Insured all X, DT, and OPENWIN bins were in my path.
Cleaned out the /var/tmp directory
Cleared out the user directory except for the .dtprofile with the Sessionlog commented out, and the .profile.
Rebooted the united and tried again.
All .dt and JDS .directories are rebuilt, and the welcome to JDS comes up.
The following is from the log files located in the .dt directory.
Results of .dt/startlog (Note: only anomaly reported for brevity)
--- starting /usr/dt/bin/dsdm &
dsdm: another DSDM is already running
Results of .dt/sessionlogs
GNOME Desktop Environment
using xinitrc file: /usr/dt/config/Xinitrc.jds
Cleaned 0 files 0 still live
Starting GNOME
X_mkdir: Not owner
(Message REPEATS)
SESSION_MANAGER=local/ITK-EDS1-IS:/tmp/.ICE-unix/12329,inet6/ITK-EDS1-IS:34993,inet/ITK-EDS1-IS:34994
Window manager warning: Log level 32: could not find XKB extension.
Window manager warning: Screen 0 on display "10.70.10.21:11.0" already has a window manager; try using the --replace option to replace the current window manager.
(Message REPEATS)
(nautilus:12375): libgnomevfs-CRITICAL **: file gnome-vfs-volume.c: line 261: assertion `home_volume != NULL' failed
(Message REPEATS 13 more times)
Anyone have any idea of what this problem could be,Your main problem is that the JDS window manager (metacity) isn't starting up, because it thinks there is already another window manager running on that display:
>
Window manager warning: Screen 0 on display "10.70.10.21:11.0" already has a window manager; try using the --replace option to replace the current window manager.
>
I obviously don't know if there really is or not (I'm guessing not, if all the windows are stuck in the top left of the screen), but running "metacity --replace &" in a terminal should force it to start up.
The gnome-settings-daemon warning is annoying, but non-fatal. It will usually just cause some icons and fonts to look incorrect. You can try running "/usr/lib/gnome-settings-daemon" again manually in a terminal, which will sometimes clear it up straight away. If not, I see you attempted to clean up some things in the home directory manually, but running "/usr/bin/gnome-cleanup" in a terminal (while not logged into JDS) might be a better thing to try. -
Hi all,
I install iplanet Directory Server5.1p1 on Solaris 8. These errors fill full in my error log files
"PR_Accept() failed, error -5971 (Process open FD table is full.)"
I use idsktune tool and detect i face the problem file descripton. I have increase to 4096 ( in /etc/system file and ulimit -n 4096), but these errors still exist in my error logs.
Who know this prolem, pls give us a solution to fix this errors
Thank alot
Best RegardsHi!
To increase the FDs available for DS, edit the Configuration --> Performance Settings and increase the no. of FDs available for DS. please check if you havent done this.
I faced the similar problem. Increased the system limit(/etc/system) and DS setting, but was still recieving the error message time to time, which disappears automatically, when FDs get freed. The server is quite a busy LDAP server.
Can someone comment how can i see the actual Fd utilisation on a Solaris 8 system.
I have been checking like:
ls -l /procs/fd | wc -l
and by:
ls -l /procs/pid-of-slapd/fd | wc -l
But always find the Fds in use to be quite lesser than the limit specified 4096.
Thanks for sharing.
Cheers!
VIvek
Maybe you are looking for
-
Can I migrate files to Mac from PC using iCloud?
We have just got an iMac and I have been trying to migrate files etc. from our old PC using Migration Assistant, but to no avail. PC says Mac is trying to connect, Mac says it has found PC but that is as far as I can get! Has anyone any suggestion? I
-
How do I convert fillable PDF to non-fillable PDF?
I need to convert fillable pdf to a non fillable pdf. how do i do that?
-
Hi, I have included a ALV table in my application. A column in the table is containing a list of amounts. When i am trying to sort it in ascending or descending order, the values are not listed properly. I am using "PAD_AMT7S" as the data type for th
-
ITunes 7.0.2 crashes and delets iPod
I have my iTunes Library on an external HD. When I'm not at home, I'd like to listen to Music, connecting my iPod (last generation b&w, 40GB) to my PowerBook (so I don't have to wear headphones all the time). Since I've installed iTunes 7, it always
-
How can JSP access a COM+ component
I have to develop JSP pages that leverage existing Microsoft COM+ components. Can anyone suggest a good resource or provide me with a quick explanation/overview of how I would access a COM+ component from JSP? I'm getting exhausted searching the inte