Pr account assignment category "m"
Hi Gurus,
After the mrp run a few prs have been generated with acct assignment category "m" & item category "u". What does this mean. Pls explain....
Regards,
Kumar
pr account assignment category "m" - M - Material
I dont this U in PR
The GR or Service Entry for the PO are not necessary in case of Blanket POs as well as one need not to mention the account assignment category during creation of PO it can be 'U'-unknown & can be changed at the time of IR.
Similar Messages
-
Purchase order and Account assignement category- Change
hi.,
We are trying to receive the Purchase order of High value components into INVENTORY.
However, most of these Purchase Orders were created with account assignments.
Because of that, if we receives these POs, they will be consumed against the object identified in the account assignment.
Additionally, some of these have been invoiced already and would need to be backed out from the finance side.
Question: How can we receive these STO Purchase orders and then make changes through Movement type ( or any other way ) so that the HIgh Value Components that are consumed against that AC assignment can be subsequently moved into Invenotory.
Also, what are the other options ( FI will not open Previous period) so that the PO's which have been invoiced can be reversed against that AC assignment.
Thanks Allhi Rajesh.,
As mentioned earlier, these Purchase orders are STO's which have been already created and we are waiting to do the GR for the same. Items in the STO PO are of High value which we need to bring into INVENTORY.
But, because these STO PO's were created with account assignments, if we do GR now, they will be consumed against the object identified in the account assignment.
Some of these STO PO's have been invoiced already and FI has indicated that they could cancel the invoices for those STO PO's in previous posting period.
Question again : How can we receive these STO Purchase orders and then make changes through Movement type ( or any other way ) so that the HIgh Value Components that are consumed against that AC assignment can be subsequently moved into Inventory and not to a cost Center (202)
Step (1) Can we cancel the Invoiced items> reverse the GR for invoiced Items>reverse STO for PO ?
Step (2) Can we reverse the STO for PO for which GR has not been done? then
Step (3) Change the PO through ME22N, remove the Account assignment category?
Or how do we correct this situation for
(1) PO's already invoiced.
(2) PO for which GR has not been made. How can we receive them into Stock and not Cost center.
Anticipating a reply
Thanks
Sri -
Exchange rate problem between GR&IR for PO with account assignment category
ear SAP experts.
We have used expense puchase order through account assignment category.
the cost object include cost center,sale order,order.because we dont use Fixed assets module in SAP,when purchase fixed assets,we also use account assignment category but no need to fill assets number(Not use account assignment category A).
the processing in current system when there is exchange rate difference between GR&IR as follows.
purchase order Currency :USD company code currency:HKD
example 1-- when something purchased into expense account,
Good receipt (1USD=7.75HKD)
Dr :expense account 100USD 775HKD
Cr: GR/IR 100USD 775HKD
Invoice receipt
Dr : GR/IR 100USD 775HKD
Expense account 25HKD
CR: Vendor 100USD 800HKD
Example 2-- when something purchased into Fixed assets account,
purchase order :USD company code currency:HKD
Good receipt on Oct .01. 2007 (1USD=7.75HKD)
Dr :Fixed assets account 100USD 775HKD
Cr: GR/IR 100USD 775HKD
Invoice receipt on Dec.01.2007 (1USD= 8HKD)
Dr: GR/IR 100USD 775HKD
Fixed assets account 25HKD
Cr: Vendor 100USD 780HKD
The fixed assets is depreciated from Nov,2007.
There is one problem that after the fixed assets is depreciated, the value for the fixed assets is added , the finance clerk have to adjust the added value from fixed assets account to Exchange Difference-Gain/Loss account by manual.
Our problem is
How to configure in order to make the exchage rate difference into Exchange Difference-Gain/Loss account for purchase order with account assignment category,not the original assigned account in purchase order item.
Many thanks
FannyHi Fanny
Even though the question is bit unclear, I guess you are looking for the T-Code OBYC. Use transaction key KDM for configuring the exchange gain/loss
S Jayaram -
How to make default account assignment category in planned order?
Scneario Description:
1. Sales order for a configurable parent item is created in ERP & order BOM is changed & transferred to APO. In APO MRP run takes place for that parent item, which creates a planned order with account assignment category "M" (M:Individual Customer w/o KD-CO.
2. Now based on the dependant requirement generated for parent item, MRP takes place for one of the child item in ERP & purchase requisition gets created for child item.
Question:
1. Can anybody help me how i can make default account assignment as "F" (F:Order) in the planned order of parent item?
2. PR created for child item also has default account assignment category as "M". we wish to change that to "F".
Thanks & best regards
Hemchandra & Sandeep MandhanaHi V. Suresh,
The account assignment category maintained in the requirement class for parent item is 'M'.
No account assignment category maintained has been maintained in the requirement class Semi-finished component (this component is sent for subcontracting).
The business process is as follows:
1. Create Sales Order for Parent say ME_PARENT.
2. Order BOM for ME_PARENT is created and subsequently cifed to APO.
3. PP/DS heuristic is run for ME_PARENT.
4. MRP for component ME_COMP is run in ERP.
It can be seen that purchase requistion for ME_COMP has a/c assgn category as 'M'. It seems that the ME_COMP has inherited 'M' from ME_PARENT.
We would like to have no a/c assgn category for ME_COMP.
Any pointers?
Regards,
Sandeep -
How to enter an account assignment category for a material.
Hi guys:
I am facing following error prompt,please tell me how to enter an account assignment category for a material.
thanks
Account assignment mandatory for material 0000000N6451 (enter acc. ***. cat.)
Message no. ME062
Diagnosis
There is no provision for value-based inventory management for this material type in this plant. Account assignment is thus necessary.
Procedure
Please enter an account assignment category.HI Shyam :
Go to transaction type OMS2. Check whether the material type u are using is ticked for Value update.
If not,
a. Use a different material type
b. or Use an account assignment category.
How to use B,that is hot to enter an account assignment cateogory -
PO with account assignment category F
Hi Gurus,
For PO with account assignment category F, the system is creating aaccounting documents during GRN for some POs & for some pOs it is not . What could be the reason.
Regards,
KumarHi SAPMM6,
Check details of account category refernce 'F' whether tick is there for GR Valuated.
Also when you are creating PO with multi-account assignment then also GR is non-valuated as per SAP standerds.
Also check the both POs for material code and there valuation classes.
Hope your problem gets resoled.
Regards,
Gitesh -
PO with account assignment Category M
Hi Friends,
In an intercompany stock transer scenario for a PO with account assignment category M, can the receiving plant receive the goods before the supplyig plant issues it? In my case it's happening only for POs with account assignment category M, so I wanted to consult you all if this is possible per standard SAP functionality.
Thanks for your help.
RanaHi
Yes this is standard functionality only. and this is not an intercompany procurement.
This is something like a Individual purchase order process. Using Item category TAB in the sales order.
In this process Goods receipt is done before you perform the goods issue to the customer.
In an inter compnay PO process the process starts with creation of a PO and not SO. where as you are creating a SO beofre the PO, and using the SO as an account assignment object.
Thanks & Regards
Kishore -
PO with account assignment category K and use two cost center
Dear Experts
When I create a PO with account assignment category K and use two cost center in the account assigment tab of PO with the same GL or with different GL in the both line item, The FI document does not get posted.
Any input on this please.
Regards
PaulHi,
Check in the PO document - Item level - Delivery tab
There are two indicators
1. Good receipt
2. GR non-valuated.
If you are giving only one cost centre, only GR check box active and GR non-valuated check box is in-active. That's why System creating FI document during GR.
If you are giving two cost centres, Both GR check box and GR non-valuated check box are active. That's why System is not creating any FI documents during GR.
Regards
Ravi -
Error while creating purchase order with account assignment category "A"
Dear All,
At the time of creating purchase order with account assignment category A - Asset its throwing error as " GL Account 123400 can not be used"
how to resolve this issue"
Edited by: Matt on Sep 16, 2010 10:09 AM - removed bold tagsHI,
Assign all assets GL to Asset Class
spro --> financial accounting new -->assets accounting --> assets accounting (lean Implementation) --> organization structures --> Assign GL
Hope Help U !
Regards,
Pardeep Malik -
Ability to modify Account Assignment Category for Service Item Categories
Dear experts,
Our customer has a requirement to modify the account assignment category when the item category is set to "D" services on a PR and PO line item. This scenario is specific to indirect procurement scenarios in SAP ECC 6.0 MM.
End users may potentially create a PR against a service item category with an incorrect account assignment category. These PRs are created using free form text. No service master exists in these scenarios. During the approval process or during PO creation, an approver or the buyer may need to correct the account assignment category. The account assignment category is "display" only and cannot be modified when the item category is set to "D". The user must delete the line item and create a new line item with the correct account assignment category. The copy function cannot be used because the account assignment copies from the existing line and cannot be modified.
Any recommendations to this issue using standard SAP configuration solutions?
Thanks,
JenniferItem Category to Account Assignment Category combination is already configured. For Service Item Category, we have three account assignment categories configured. All three categories are valid in different scenarios. Sometimes the user selects the incorrect account assignment category (out of the three available) depending on the business scenario. PT9F configuration is already set to Account Assignment category "optional". However, the account assignment category still cannot be modified on the PR when the item category is "D" service.
Any other recommendations? -
Account assignment category not flowing to PR and PO in MTS
Dear All,
I am facing a problem in MIGO. When I enter the PO number, it says, PO has no selectable items.
When I consulted with MM consultant here he says the Account assignment category is not there in PO. And this has to flow in PR and PO when it is created.
The PR is cretaed by MRP run and the strategy used is 40.
Is this is the reason for error in MIGO? If yes where I do need to set this so that account assignment category will come in PR and hence in PO.
Please suggest.
Sumeet VaidyaHi,
Since the PO is not released , it is not allowing you to do MIGO.
Hope , there might be a Release Procedure / Release Strategy defined for the Purchase Order. So pls consult with your MM Consultant and get the PO released.
Then you will able to post the Goods Movements.
Regards,
Sheik
Edited by: sheik abdulla on Apr 17, 2008 6:00 PM -
ASSET CODE FOR ACCOUNT ASSIGNMENT CATEGORY IN PURCHASE ORDER.
Sir,
greetings!!!
here is a procedure we follow...
We create asset code(AS01) for capital items. when createing Capital purchase order for the item, we give A as asset for assignment category which then asks for asset code in acc assignment cat tab. this is a general process.
Now problem is that I want the field of account assignment category in PO item tab to be automatically populated with the asset code at the time when I put the material and plant i.e capital item.
Is it possible.
What is happening is that the user while creating PO is not at all selecting correct asset code with reference to capital item, that has a huge effect on asset accounting..
please provideHello,
As such there is no standard thing available, but there is one thing that you can do, that is
Create a PO document type for Assets and for that document type allow only account assignment A and delete rest including standard account assignment that is blank.
This way, once a person choose the document type for Assets, he will have to give the account assignment A.
Regards
Prabhjot Singh -
Budgeting thru Internal Order with Account assignment category 'A'
Dear All
I want Budgeting thru Internal Order with Account assignment category 'A'
i.e
Created Assets with Tcode As01
Created Internal Order and assigned budget amount to IO with Tcode KO01 and KO22
Created Purhcase Requisition with Account assignment catg as 'A' i.e asstes. Also given Internal Order No and Asset code in PR.
Releases PR with ME54N
Created Purchase Order with Account assignemnt catg as 'A' i.e asstes. In Purchase Order it displays Internal Order No. and Asset code which i have given in PR in Account assignemnt tab on Item level
Released Purchase Order.
Now i am checking budget detail in Tcode : S_ALR_87013019 -> List: Budget/Actual/Commitments , Here it gives message , "No line item were selected " in Commitment line items.
Actually my requirement is , i want budgeting thru internal order and want to use Account assignment category as 'A' (Assets) in PR and PO.
Why it's not showing detail in report S_ALR_87013019 .
What is solution for my requirement. Is it possible with some configuration or by other options.
Thanx & Regards
Swati ShahHi Swati,
You can do this in Asset Accounting. By standard MIGO Posting Date is taken as capitalization date for asset. You can configure to make it 'Document Date'.
So, whenever user is posting thru MIGO, he will have better control on deciding capitalization date by inputting appropriate date in Document Date Field in MIGO.
Check this thread..
Re: Depreciation start date for asset thru MIGO
Regards,
Sayujya -
G/L account defaulting in purchase order with account assignment category.
Hello Gurus,
when creating a purchase order item with account assignment category - E, system is defaulting G/L account in account assignment tab for that item.
We have material group defined for this material in material master.
Please help me in finding why this is happening and from where this G/L account value is considered.
regards,
Steve.Hi,
Ckeck in KA01 and that particular GL Acct. might be assigned to cost element.
For eg if the G/L account is 400000 in that account on top in menu you will find edit cost element .so check in wether it is maintained.
once check and reply.
Check in OKB9 whether g/l account and cost centre is maintained for your company code.
Edited by: V K on Mar 31, 2008 6:34 AM -
G/L Account default in purchase order with account assignment category K
Hello gurus,
when creating a new position in a purchase order with account assignment category K "Cost Center", the G/L Account No. is always filled with a default account.
Where and how can I define, what account is used as default GL Account?
The version is sap ecc 6.0.
I will reward points all answer!!
Thank you!Hi
check the valaution class assigned to the material or the material group (if no material is being used)
Now goto OBYC, Click on the transaction key GBB, for the account modifier VBR, & for the valuation clqass combination - check the G/L account.
Based on this combination the G/L is determined auitomatically in the PO. if you chnage it here ... it will reflect in PO at the time of creation.
Thanks & Regards
Kishore -
Error in MIGO posting against PO with account assignment category K
Hi folks,
I have craeted a P.O. Account assignment category K, while creating GR, I am getting following error message
Account determination for entry SABB (chart of account) Z44 (Tra/event key) TE (act. grouping code) not possible
Message no. M8147
What could be the possibel cause.
I have already did the G.R with same account assignment in the past.
RegardsDear
The system did not find an account for this transaction. This means that the account determination is not maintained in MM Customizing (Valuation). The key is made up of:
Chart of account
Transaction key (= Posting transaction)
Valuation grouping code
Account grouping code
Valuation class
System Response
The system cannot update a G/L account for this transaction. You cannot post the transaction.
Procedure
Contact your system administrator.
If you have the authorization, check the Account determination in Customizing forValuation.
Regards
Maybe you are looking for
-
How do I get the contacts from my mac to sync with Icloud? I need to back up my phone since I will be receiving a new one tomorrow and the icloud contacts are not the same as the ones on my mac. Help me
-
I upgraded to an Iphone 5 and open new Icloud account, I then backed up my phone on my brothers Mac Pro, I now want to restore my info to my phone and I get a message that says not enough space. What do I do
-
I made a formula that returns a list, each list item is text type. My problem is, i want to know if there are items that is a number, then I do this: List.Transform([My List], try Number.From otherwise null) The 'try <> otherwise <>' is not working,
-
My aperture library is obviously corrupted. In the finder, it shows up with size 0 bytes. However, something seems to be there because the finder becomes very slow when browsing to the containing directory and it takes Aperture several minutes to sho
-
Date: Is it possible to get the last Friday of each month?
Hello all, I am trying to create a column of dates which are a specific day in each month, e.g. the last Friday of every month, or the first Monday of every month. Is this possible, and if so could you please guide me on how to? Thanks James