PR after release - Some fields grey off (Confiq settings?)
Dear Gurus,
Once after releasing the Purchase requistion, some field get greyed off automatically, where can i see the configuration in SPRO, Please advice
Hi,RS
There are below factor will impact the purchase screen layout:
1.Transaction(Tcode)
2.Document typpe
3.item catagoty
4.acc assignmnet catagoty
5.release status
6.authorization to display prices
For the release status,we could go to below path:
SAP Customizing Implementation Guide->Materials Management->Purchasing->Purchase Requisition->Release Procedure->Procedure with Classification->Set Up Procedure with Classification,and press Release indicator,you will get a screen and one item ,press the magnifier,you will look for the field of Field selection key. You could get value of Field selection key.
Then
go to
SAP Customizing Implementation Guide->Materials Management->Purchasing->Purchase Requisition->Define Screen Layout at Document Level,you will find the itemas per the Field selection key and go in.
Dick Hua
Similar Messages
-
How to resize JDialog after making some fields invisible?
Hi,
I have many fields in a JDialog box. And I am making some of them invisible (based on some logic).
Even though I am using invisible, the dialog size is not resized automatically.
I can see so much space and it is not good.
Is there any way so that I can resize this dialog?
Regards,
PraveenPraveen_Kumar_Jayaram_1985 wrote:
But I am not using any layout manager. It is free design. Is there any way to achieve my requirement without using layout manager?But this is what layout managers are made for. Why not use the correct tool for the job? Also, please do not cross-post questions in multiple forums. This will frustrate anyone who tries to help you only to find out later that the same answer was given hours ago in a cross-posted thread. For this reason, many volunteers here and at the other sites refuse to help repeat offenders. -
My iphone 4s has some serious issues. After clicking some youtube link, my photos, settings icon, app store icon and safari icon and many more apps have been deleted. My iphone is useless since last 4 weeks. I cant do anything without these missing apps. please help.
If it was just my router then my own network would kick in wouldn't it?
No. Not even sure what you mean by that. The phone is trying to access particular IP addresses on the internet, which don't exist on "my own network."
plus all my internet items at home running on my wifi are doing fine
No again. The fact that your router works with other devices doesn't mean it's compatible with the iPhone. Did you even try restarting and updating the router as suggested? -
Disabling selected Purchase Order field(s) after released/approved
Hi Experts,
I have a requirement to disable specific Purchase Order fields after released via ME29N.
For example, in Purchase Requisition - I can "Release Indicator - Field Selection Key" to control Purchase Requisition screen layout. However, for Purchase Order - the configuration for "Release Indicator" consist only standard default "Chgable" options.
Question:
Is there a way to customize the Purchase Order "Release Indicator" for screen layout based on customer requirements other that using the default as mentioned above?
Thank you.
StevenHi Padmasri,
I understand your explanation on the standard SAP behavior.
Nevertheless, I'm looking for some flexibility to meet customer requirement. Like in Purchase Requisition, there is option to further customize the screen layout by linking it to the "Release Indicator".
Therefore, apart from the standard 6 options given by standard SAP, can we add/customize the options? For example, my customer may one to change a field in the Purchase Order even after released.
Thank you.
Steven -
Deception field in Project defination grade out after release of project
Hi Experts,
I am facing one issue in cProject that when I release the project , The description field in project definition becomes grade out, so not able to update the description field . I checked the field setting in global enhancements , it thy are fine.
Could any one help me in this regard?Hi Shashank,
Never project description gets greyed out after release of project.
This normally happens if field control is activated for that particular field 'Description' with condition 'object is released' fulfilled with 'only display'.
Regards,
Ravi -
How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.
-
Make Cost center in grey mode after releasing order
Dear Guru,
At the time of creating order [IW31] I have made Cost center as Mandatory under Location Tab.
My requirement is after releasing order the Cost center has to be in Grey Mode
Is there any Configuration settings available or any alternativea are available.
Please suggest
Regards
HonyalHI
Check with the following links:
http://help.sap.com/saphelp_47x200/helpdata/en/13/05b3ae635611d2b43b006094b9c9b4/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/13/05b3ae635611d2b43b006094b9c9b4/frameset.htm
Thanks -
I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc. but no luck ...
In fact after updating the software to the latest version I am having more of this... Sometimes the wifi button freezes an I can't even slide it to on / off...
ThanksNoooo! Actually I too had d same prob wit my iPhone 4S. When I connect to my wifi network it won't get connected or it wil be grey scaled! I took it to d istore and since I had warranty they replaced my IPhone. It iPad charger has high volt than ur iPhone charger so when u connect wit it, there is a chance where large amount of current passes thru ur iPhone. So for sure it wil damage ur motherboard and its parts! Many said that iOS 6 or 6.0.1 or 6.1 was d reason for tis wifi prob! But apple never made its mistake wit it's software. If and only if u hav hardware prob u wil hav these sort of wifi prob Bluetooth prob! So best way s to replace ur iPhone!
-
Please help my computer is not repsonding after doing some simple updates. I follow the instructions and which is simply click for the update to take place. I did what I was instructed to do. I did not do the new update for the Mavericks yet. I just did simple updates. The computer shutted down and restarted but would never get pass the grey screen with the spinning wheel and the booting bar that would not go past a certain point befor shutting off again. The computer is practically brand new. I purchased the computer from best by 2012 and the warrenty just ended the past October. I hardly use the computer maybe 4 times since I have had it because I have another main computer that I uses. However, I don't want to do a hard rest becuase I do have the entire adobe suits software that I paid for and don't want to loose. I have an appointment with apple today to see what they say but I hope that my computer that I hardly every use is not defected after doing a updated pushed by Apple. Any thoughts or suggestions???? Thanks in advance Apple Family :-)
Well, I was at Apple for sometime on that day. I got a Genius that did not want to work. She basically jumped to the money to tell me that my hard drive was no good and that I was out of warranty (October 2013). I began to explain to her that I had only used the computer 5 times and that I don't use this computer as my main computer because I also have a Toshiba that is less expensive that I have had for several years and not one issue out of it. The rep told me that I could by a new hard drive for $161.00 and that I would loose all of my software and photos that I have on this computer. However, I told her that it's bazaar that it happens right after my warranty goes out and had I used it more often when in warranty before October then I would have been covered. Keeping in mind that I would still be very disappointed with the product because I would loose all of my information and it would not make sense to me why the hard drive fails on a very gently used computer. So I asked for a manager and it took her some time to get one. In the mean time I watched how the other Geniuses interacted with the other customers and seen that they were very engaging with convo and very help. I guess I just I got another lemon when I got my rep. When the manager finally came. I went from A-Z with the issues and that I felt that something could or should be done because the rep said that she did tests on my machine and it read to her that my hard drive was bad and there was nothing that could be done. I explained that I was not looking forward to paying for services to have my new computer repaired. The manager offered to give me 25% off the cost but I still didn't feel that it was effective. After he left and the rep wrote the notes in the system, I told her that I didn't think that all options had been exhausted and that there was something else that could be done. I told her to erase the machine and see if the updates could be installed and if the system would continue to do the same thing. The rep was hesitant and said that I would loose everything which we already know that we were at conclusion from the beginning. She assured me that I would happen again and that I would need a new hard drive. I just told her to erase the machine and get me another manager because I was just getting tired of her unhelpfulness and negative perspective. The new manager came and was very pleasant and I explained everything once again from A-Z. I informed him that I had the machine erased and that I need his help with options because I don't feel that the rep or the last manager was resourceful or helpful. He apologies for the actions of the reps and proceed to tell me that they will run all the updates in the store and that if it booted correctly that I should continue to use the machine with out adding the adobe software back on just incase that it crashes again and I'm out of money once again. However, if it does happen again and it is a hard drive issues that he would work with me to resolve the issues. As my computer went through the process of rebooting from out of the box stage another rep approached me because he could tell that I was upset and not happy. I told he what had happen and he said I think I can help you a little more. He said that I just want to run further testing on you computer for different components to make sure that everything would work properly and pin point any issues. I was delighted with that option. Anything would help at this time especially someone who is willing to help. The first test that he ran was to for the hard drive and he said that since it failed the test the first time could be because the software update glitch and did update correctly which would make the test faulty and be negative. As I sit with finger crossed the test came back as a pass test that my hard drive was not the issue and that the update was the cause and that I did not have to buy a new hard drive. I was happy that the computer was ok but I lost information. All of the updates were done in the store and everything works fine now. If I was not persistent about my gut feeling then I would had left out thinking that I had to pay for a new hard drive that I really didn't needed. Now I can invest that money in a external hard drive to start backing up my information. Lesson learned by I'm still on the fence about things but I hope all is well. I really went through a lot. No help or no service was not an option that I was taken. I hope that it helps.
-
InDesign data merge isn't pulling in all fields, seems to be confusing some fields
Hi there - I'm trying to do a data merge in CS6 for about 450 address labels. The labels are 10-up so I made a .csv file with 10 equal sets of colums (named Firstname1, Firstname2, Firstname3, etc.) and merged those into my label document. I've done this before plenty of times with no problem, but for some reason this time the merge seems to be getting thrown off by something. I can see multiple places in which the merge will stop after a certain field - usually the address - then there will be a bunch of blank labels, then on the next page the address from the last label will start up again. I've attached a screen shot of what it looks like when the address breaks like this. In the top image, Troy Christian's merge breaks after the street again. Then a few blank labels follow, then Troy's city, state, and zip appear at the beginning of the next page. Then it continues on with the next address block (inserting commas along the way for some reason), then it breaks again.
I've scoured both the merge fields and the Excel file - nothing seems out of the ordinary - resaved the Excel over and over as both .csv's and .txt's, and can't get it to fix. Any ideas here?? Please let me know if there's any further info I can provide.
Thank you!We didn't end up even looking at it in a text editor, although that probably would have been easier - we just saw where the errors were occurring in the merge and looked carefully at those cells in the .csv file, and then deleted line breaks, commas, and weird characters. Worked like a dream.
Thank you so much for your help on this!
e -
Changeability of Purchasing Document During/After Release
Dear All
I want that whenever there is any kind of change in PR/PO after start of release process the PR/PO should get de-released.I mean if PR/PO quantity is increased or decreased by 1 ea or price is increased or decreased by even 1 Re or any kind of change(e.g payment terms) then also the PR/PO should get dereleased if it has been approved for some level.
How can I achieve this?? What should be the changeability status for release indicator or is there any other way out?Hi Satish,
Either u maintain 4 or 6 in release indicator, system is not revoking ur relaese strategy its own after change in price or Qty
The only solution is that in version tab if u check the complete check box, then it will revoke and u have to release it again.
but problem is that user usually forget to check that complete check box and save and relaese strategy not revoke.
Solution is as i think and applied that u must have make some fields mandatory in version so that user has to go in version tab to filled that mandatory field with that and ask the user to check the complete check box.
2nd solution is set message MEDCM 014 as Error in Configuration. This will prevent GR for the changed quantity (even if it is not released).
this may help u !
Regards,
Pardeep Malik -
Donu00B4t release tasks after releasing a phase
Hi guys,
after searching a lot and programming in dpr_events i have no further idea.
Does anybody know if it´s possible to do not release a task after releasing the upper phase?
I tried the method set_data_ext from cl_dpr_task_o in dpr_events but there is no field for changing the sytem status from '1701' (released) to '1700' (created).
Thanks for advice,
TobiasHi Zhenbo,
thanks for the help. I solved the problem with your suggestion. In DPR_EVENTS first I buffered the task types and then I removed them, so that the system cannot release the tasks.
In the project itself, I import the buffered task types and then I search in the project for tasks that have no task types. If the GUID matches I set the task type and remove the entry from the buffered task type table.
Now I can release a phase without releasing the underneath tasks.
Because of the filtervalue ON_PPO_RELEASED in DPR_EVENTS I can release top-tasks so that also sub-tasks are released.
So the behavior is correct again except that there are some error messages when I release the project. But that´s OK so far.
Regards & thanks again,
Tobias -
Make the output of the BI report rtf file some fields non editable
Hello All,
I want to make some fields in the output of the BI report as editable and some non editable. Any output format is fine (PDF, RTF or HTML) Please let me know if anyone knows how to do it.
Thanks in advance..
AnuYou can add RTF to active allowed output type list (provided that your reporting system supports it) by going to CustomerReportExtensions.xml file and adding the following node right after ParameterTypes node:
<ActiveReportOutputTypes configChildKey="key">
<ActiveReportOutputType key="RTF" value="RTF" extension=".rtf"/>
</ActiveReportOutputTypes> -
Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick so I could put more than the fat32 4gb on, my Imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols after, mouse pointer moves but thats about it.
Have used R and cmd to get a menu up but once I choose one of the four options my mouse is rendered useless and I cant get any further, have downloaded, to another usb stick recovery disk assisstant and am trying to use that in conjunction with the lion option on the previously mentioned screen, computer was responding really slowly and has now frozen on the terms of software license agreement (maybe the last hurdle!) can anyone pleeeeeease help!!!!!??????It's likely that the boot drive is failing, or that there's some other hardware fault. Run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly. -
Database hangs after retrieving some records....
hi,
I create a two level B+-tree index, for the first level i'm using key as logical database name, for the second level B+-tree i'm using some other field in my data. I am retrieving the records based on logical database name. I am using C++ to implement my index.
In the following code i'm retrieving records from database. Program is behaving differently for different logical database names. For example in my database i have around 4 lakhs records with logical database name 'A' and around 1 lakh of records with logical database name 'B'. The following code displays all B records but programs hangs after retrieving some A records.
I'm using PAGE_SIZE=8192, numBuffers=2048, and runnig in Fedora Core3.
DbEnv myEnv(0);
myEnv.set_cachesize(0, PAGE_SIZE * numBuffers, 0);
myEnv.set_data_dir("/home/raviov/new/database");
try {
myEnv.open("./", DB_CREATE | DB_INIT_MPOOL, 0);
catch (DbException &e) {
cerr << "Exception occurred: " << e.what() << endl;
exit(1);
db=new Db(&myEnv,0);
db->set_pagesize(PAGE_SIZE);
db->set_bt_compare(compare_int);
dbname=itoa(p);
try
db->open(NULL,
"treedb.db",
dbname,
DB_BTREE,
0,
0);
catch(DbException &e)
cerr << "Failed to open DB object" << endl;
exit(1);
db->cursor(NULL,&cursorp,0);
key=new Dbt();
data=new Dbt();
while(ret=(cursorp->get(key,data,DB_NEXT))==0)
j=*((int*)key->get_data());
q=(*((struct tuple*)data->get_data())).startPos;
r=(*((struct tuple*)data->get_data())).endPos;
s=(*((struct tuple*)data->get_data())).level;
cout<<"position : "<<j<<"\t";
cout<<"start : "<<q<<"\t";
cout<<"end : "<<r<<"\t";
cout<<"level : "<<s<<"\n";
if(ret==DB_NOTFOUND)
cout<<"no records";
exit(1);
if(cursorp!=NULL)
cursorp->close();
try
db->close(0);
catch(DbException &e)
cerr << "Failed to close DB object" << endl;
exit(1);
myEnv.close(0);HI Andrei,
thank you for giving reply, I'm not using any secondary indecies, subdatabases and not using any threads.
the following code displays index...
#include <stdio.h>
#include <db_cxx.h>
#include <iostream.h>
#include <db.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
int PAGE_SIZE=8192;
int numBuffers=2048;
char *itoa(const int x)
char buf[100];
snprintf(buf, sizeof(buf), "%d", x);
return strdup(buf);
int compare_int(Db dbp, const Dbt a, const Dbt *b)
int ai;
int bi;
memcpy(&ai,a->get_data(),sizeof(int));
memcpy(&bi,b->get_data(),sizeof(int));
return(ai-bi);
struct tuple
int startPos;
int endPos;
int level;
main()
FILE *fp;
int i,j,k,l,m,n,total=0;
char dbname[500],filename[500],str [500];
tuple t;
Db *db;
Dbt key,data;
DbEnv myEnv(0);
myEnv.set_cachesize(0, PAGE_SIZE * numBuffers, 0);
try {
myEnv.open("/home/raviov/Desktop/example", DB_CREATE | DB_INIT_MPOOL, 0);
catch (DbException &e) {
cerr << "Exception occurred: " << e.what() << endl;
exit(1);
for(n=0;n<=84;n++)
db = new Db(&myEnv, 0); // Instantiate the Db object
db->set_bt_compare(compare_int);
db->set_pagesize(PAGE_SIZE);
strcpy(filename,"/home/raviov/Desktop/GTCReport/code/sequence/splitter/tree/");
strcat(filename,itoa(n));
fp=fopen(filename,"r");
if(fp==NULL)
cout<<"error in opening the file";
exit(0);
while(fgets (str , 500 , fp)!=NULL)
sscanf(str,"%d(%d,%d,%d,%d)",&i,&j,&k,&l,&m);
key=new Dbt(&i,sizeof(int));
if(total==0)
strcpy(dbname,itoa(j));
t.startPos=k;
t.endPos=l;
t.level=m;
data=new Dbt(&t,sizeof(t));
if(total==0)
try
db->open(NULL,
"tree.db",
dbname,
DB_BTREE,
DB_CREATE,
0);
catch(DbException &e)
cerr << "Failed to create DB object" << endl;
exit(1);
total=99;
int ret=db->put(NULL,key,data,DB_NOOVERWRITE);
if(ret==DB_KEYEXIST)
cout<<"key already exist\n";
exit(1);
delete key;
delete data;
total=0;
fclose(fp);
try
db->close(0);
catch(DbException &e)
cerr << "Failed to close DB object" << endl;
exit(1);
myEnv.close(0);
}The following code retrieves the records from database that we had built above...
#include <stdio.h>
#include <db_cxx.h>
#include <iostream.h>
#include <db.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
int PAGE_SIZE=8192;
int numBuffers=2048;
char *itoa(const int x)
char buf[100];
snprintf(buf, sizeof(buf), "%d", x);
return strdup(buf);
int compare_int(Db dbp, const Dbt a, const Dbt *b)
int ai;
int bi;
memcpy(&ai,a->get_data(),sizeof(int));
memcpy(&bi,b->get_data(),sizeof(int));
return(ai-bi);
struct tuple
int startPos;
int endPos;
int level;
main()
FILE *fp;
int i,j,k,l,m,n,total=0;
char *dbname;
char filename[200],str [100];
tuple t;
Db *db;
Dbt key,data;
Dbc *cursorp=NULL;
int ret,x=4;
char *ravi;
int p=84763;
int y=2134872;
int r,s,q,count=0;
DbEnv myEnv(0);
myEnv.set_cachesize(0, PAGE_SIZE * numBuffers, 0);
myEnv.set_data_dir("/home/raviov/new/database");
try {
myEnv.open("./", DB_CREATE | DB_INIT_MPOOL, 0);
catch (DbException &e) {
cerr << "Exception occurred: " << e.what() << endl;
exit(1);
db=new Db(&myEnv,0);
db->set_pagesize(PAGE_SIZE);
db->set_bt_compare(compare_int);
dbname=itoa(p);
try
db->open(NULL,
"tree.db",
dbname,
DB_BTREE,
0,
0);
catch(DbException &e)
cerr << "Failed to open DB object" << endl;
exit(1);
db->cursor(NULL,&cursorp,0);
key=new Dbt();
data=new Dbt();
while(ret=(cursorp->get(key,data,DB_NEXT))==0)
j=*((int*)key->get_data());
q=(*((struct tuple*)data->get_data())).startPos;
r=(*((struct tuple*)data->get_data())).endPos;
s=(*((struct tuple*)data->get_data())).level;
cout<<"position : "<<j<<"\t";
cout<<"start : "<<q<<"\t";
cout<<"end : "<<r<<"\t";
cout<<"level : "<<s<<"\n";
delete key;
delete data;
if(ret==DB_NOTFOUND)
cout<<"no records";
exit(1);
if(cursorp!=NULL)
cursorp->close();
try
db->close(0);
catch(DbException &e)
cerr << "Failed to close DB object" << endl;
exit(1);
myEnv.close(0);
}
Maybe you are looking for
-
Slow-to-load album covers in Grid View
I've encountered a problem for a while that I thought I might bring up... Whenever I start iTunes, it defaults to Grid View, the only view I use when browsing iTunes. Now, I'm unsure if iTunes caches album art or not, but every time I boot it up and
-
Good printers for mb pro and airport
can anyone recomend a good 3 in 1 printer that works well with mb pro and airport express?
-
Imported Clips Skipping, Restarting
I'm having the weirdest, most frustrating problem with garageband. Some of the clips I import to the "real instrument" region will restart from the beginning halfway through the clip. So you hear the first part of the clip twice, but never the end of
-
Not contain the userid as part of the password (Password Rule).
Hi Team, We are using SAP Netweaver 6.40 and i am trying to set "Not contain the userid as part of the password " as part of the password rules we have and looks like this predefined SAP rule is This rule applies only in systems up to SAP R/3 4.6D.Ca
-
Can iPhoto events be converted en masse into individual albums in Photos?
So far as I can tell, the new Photos software does not allow photos to be organized into events, as in iPhoto. It seems that albums could serve the same purpose, though I may have that wrong too. If I'm going to be making albums now out of what I u