Pr CC crash on render every time... and project appears mangled...

This is new for me in Pr, although not new on computers in general. I'm looking for hints on:
1) How do I best diagnose and/or report bugs like this?
2) Why would Pr think a project file is corrupt... when it is not?
I have a significant video conversion project under way. The current file is a 90 minute (VHS to digital) file. Everything has been going well. But after adding a couple of effects (B&W, Shadow & Highlight), now about 50 minutes into a multi-hour export, Pr crashes hard.
I have the crash log from Windows.
This time around I could not re-open my project file ("corrupted") until I rebooted my computer. Then all was well again.
SO.... I'm left with the above questions.
The crash point is nothing special in the project. Right in the middle of a section of video. No glitches. I'm doing a re-render of just the area around the crash and it looks like nothing special will happen.
Hints? Clues?

Further hint: it would appear that the crash is not related to file position but rather approximately how much rendering has taken place.
Starting at frame 0, it went around 16k frames before crashing.
Starting at frame 13k, it went around 16k frames before crashing (16646, not 16384 for binary geeks )
I am not out of any resource that I know of (memory, disk, etc)

Similar Messages

Crash on Render every-time with Sony F7 footage

Working on a project with Sony F7 mxf files.
On a Mac, 10.8.5, cc 2014, up-to-date.
Everytime I try to render out the sequence, Premiere Pro crashes.
I sent it to Adobe Media Encoder…and it crashes everytime (about 20 seconds in to rendering)
I've changed the codec and settings that I'm rendering to…crashes every-time.
I've copied the clips to a new time line with different settings… still crashes every-time.
removed files (like the music track), and turned off effects, … still crashes every-time.
Finally the only way I could get it to work: I copied the entire seq into after effects and rendered it from there, no crashes.
editing is smooth….just seems to be a major problem rendering.
Anyone know of a current issue / workaround?

Still no fix. I have new information.
The crashes still happen but it is when rendering to prores. If I render to "Animation codec", it works…..(huge files) but that's my current workaround.
I've updated all the adobe apps, the GTX 780 ti cuda/ nvida drivers, and all the apple security updates.
That's where it sits right now.
Still crashing on render.

TS2518 I upgraded to Aperture 3.4 this morning, and now it will not open at all! It crashes every time, and tries rebuilding the library and repairing most times. The Library open fine in Iphoto

Every time since I upgraded this morning, attempting to open Aperture causes a crash. I upgraded to Aperture 3.4 this morning, and now it will not open at all! It crashes every time, and tries rebuilding the library and repairing most times. The Library open fine in Iphoto

If you do not have the original install DVDs, use the Aperture Trial installer instead:
Try if this download link for the trial version still works: if yes, you can unlock it with your serial number:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
Regards
Léonie

HI there, I am having trouble updating my CS5 Master's Collection Suite for at least a month now. I keep gettin this message "There was an error downloading this update. Please quit now and try again later" every time and do not know how to fix it.

I am having trouble updating my CS5 Master's Collection Suite for at least a month now. I keep getting this message "There was an error downloading this update. Please quit now and try again later" every time and do not know how to fix it.
Any help will be highly appreciated.
Thanks a lot in advance.
Sincerely,
Uvaldocj@@
Here is a list of the products I am troubled with:
Adobe After Effects CS5 10.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Bridge CS5 4.0.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later.
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe® InDesign® CS5 7.0.4 update
There was an error downloading this update. Please quit and try again later.
Dreamweaver CS5 11.0.4 Updater
There was an error downloading this update. Please quit and try again later.
Fireworks CS5 11.0.2 Update
There was an error downloading this update. Please quit and try again later.
Photoshop 12.0.4 update for Photoshop CS5
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later.

I'm having the same issue. And Dreamweaver now crashes after just a few seconds.

When i editing in the piano roll windows, after 10 at 20 editing steps my logic pro 9 crashed down. Every time. Is this a bug?

When i editing in the piano roll windows, after 10 at 20 editing steps my logic pro 9 crashed down. Every time. Is this a bug?

Maybe find a local who can translate for you. I don't know what to tell you for dealing in another country for service on your computer.
I can offer you something you can do if you want to give it a try. You'll need a backup of your data in your Home folder because you need to erase the drive. You'll also need a solid, preferably fast, internet connection.
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Do i have to render every time??

i have a simple piece of text in my browser (named the default name "text") that i use over and over in lots of sequences. i stuck a drop shadow in and now i have to render every time? is that right? i didn't have to render before; is there a way to just render the one time?
thanks!

Create your title, put it in and empty timeline, but do NOT render it.
File>Export>QuickTime Conversion.
Set the format type to QuickTime. Click on Options and set the codec to Animation. Set Colors to Millions+. Export.
When you bring this back into your project and put it over video in the timeline, it will still have to be rendered to composite over video, so I'm not sure it will gain you anything.

Premier pro crashes on startup every time

Premier Pro CC 2014 crashes on startup every time. Operating system is OSX Yosemite 10.10. However, the problem begane with previous OS versions and the update did not fix the issue. CC is up to date as version 8.1.0. I've verified and repaired my startup disk as well and there are no issues with my machine. I am using:
MacBook Pro (Retina, 15-inch, Early 2013)
2.4 GHz Intel Core i7
8 GB 1600 MHz DDR3
Intel HD Graphics 4000 1024 MB
I have a school project coming up and really need my CC to be working.
Thank you so much for the help,
William Durland

The first thing I suggest is renaming three Premiere Pro folders at the following paths:
/Users/<username>/Documents/Adobe
/Users/<username>/Library/Application Support/Adobe
/Users/<username>/Library/Preferences/Adobe

Aperature crashes/force quit every time I open it

Aperature crashes/force quit every time I open it since the first time I installed it - Can anyone assist with troubleshooting this?

CherCherie wrote:
Aperature crashes/force quit every time I open it since the first time I installed it - Can anyone assist with troubleshooting this?
My Aperture/Photoshop workflow paged out on my MBP even with 8 GB RAM. Personally I recommend simply upgrading to 16 GB RAM immediately. The limited RAM may or may not be the direct cause of your SBBOD but it is very likey that your MBP is paging out, and paging out is very slow which often does cause problematic operation.
If you want to evaluate whether or not you currently have adequate RAM on board:
Look at the Page Outs number under System Memory on the Activity Monitor app before starting a typical Aperture work session and write the number down. Recheck the Page Outs count after working and write the number down again. If the page outs change (manual calculation of ending page outs number minus starting page outs number) is not zero your workflow is RAM-starved.
Ignore the pie charts and other info in Activity Monitor because they are often misleading regarding RAM usage. For RAM analysis, manually count page outs.
If your test showed that page outs increased during operation you can
• add RAM, very strongly recommended
• and/or simply try to run Aperture by itself after restarting, a workaround
• Restart before Aperture work sessions to clear possible memory leaks
Personally IMO maxxing out RAM to 16 GB from OWC or Crucial is a no-brainer at today's prices. More and more, app and OS designers are (rightfully) designing to take advantage of lots of RAM.
At 60% full your HDD is not overfilled but HDDs slow as they fill so IMO you should replace it with a larger drive SSD/HDD when it gets ~70% full. Also you may want to consider moving to a Referenced-Masters workflow with the Masters on external drives to keep your internal drive from overfilling.
HTH
-Allen

After a complete uninstall/reinstall Firefox still crashes on exit every time

Firefoc crashes on exit every time. Did a complete uninstall/reinstall. Did not change or add anything after the install.
== Crash ID(s) ==
af89b2d3-f902-4cb1-a5dc-d98842100510
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.29 Safari/533.4

That is a problem with the "Facebook Photo Uploader" (fbplugin).
*[https://bugzilla.mozilla.org/show_bug.cgi?id=1086977 bug 1086977] [10.10] Facebook's old "Facebook Photo Uploader" (fbplugin) crashes on load on OS X Yosemite
You can check these location if you can find this plugin file:
* /Library/Internet Plug-Ins
* ~/Library/Internet Plug-Ins
*https://developer.mozilla.org/Gecko_Plugin_API_Reference/Plug-in_Basics#How_Gecko_Finds_Plug-ins
In Mac OS X v10.7 and later, the ~/Library folder is a hidden folder.
*http://kb.mozillazine.org/Show_hidden_files_and_folders#Mac_OS_X

Mail crashes at launch every time

Hi,
Mail crashes at launch every time.`
I'm on OSX Mountain Lion and it worked for a time but, suddenly, Mail began ti crash...
iMessages crashes too.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Every version of firefox 6 won't open, I just get that crash report. Every time this has happened I reinstall firefox 5 which works fine. Anybody out there have a similar problem, any help would be appreciated

every version of firefox 6 won't open, I just get that crash report. Every time this has happened I reinstall firefox 5 which works fine. Anybody out there have a similar problem, any help would be appreciated

I had this issue. I went to c:\program files (x86)\Mozilla Firefox\
I renamed my plugins folder to plugins.old.
It recreated the Plugins folder and all was good again. I have since reinstalled the plugins I've been prompted to install.

My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time?

My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.

I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited. In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items. I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible. I simply deleted that item and now I don't have the situation you described and my wireless is connected. Hope this helps!

Photoshop CC wont open it asks me to log in every time and when i do and it says im good to continue it just asks me to login again

my photoshop CC will not work bridge and lightroom 5 open just fine but when i go to open photoshop it asks me to log in every time and when i do and it says im good to continue it just asks me to login again today is the first time i am experienceing this problem i have been using CC for about 2 to 3 months now need this problem fixed asap please

Open the Desktop Application manager. click on the little cog icon > Preferences > Account.
If you sign out, and sign back in again, that will force the Desktop Application Manager to rescan your system and check installed Adobe apps.
I think that the latest updates fixed the 'You have been signed out' problem. If not the fix is a bit long winded, so try first, and if you are stuck I/we will talk you through the fix.
Photoshop: Basic Troubleshooting steps to fix most issues

HT1692 I use an iPhone 5, and want to sync my phone calendar and contacts with Outlook 7 calendar and contacts; twpo problems--I now get dozens of new calendars every time, and my calendar will not syncd at all.; meaning that date entries on Outlook do no

I use an iPhone 5, and want to sync my phone calendar and contacts with Outlook 7 calendar and contacts; two problems--I now get dozens of new calendars every time, and my outlook calendar will not sync at all.; meaning that date entries on Outlook do not come across ot iPhone.

It is unusual for the calendar to sync and not the contacts in Outlook. I've worked with Outlook for years. You didn't answer what computer OS you are using. If it is Windows, have you tried to reset the sync history in iTunes? Do that by opening iTunes, go to Edit>Preferences>Devices and click on reset sync history. If you have done this and it doesn't help, then we can try and run scanpst.exe on your Outlook file and see if there are any errors. Search your computer for that file, however it normally resides in one of the Microsoft Office folders in the folder Program files. After that, you can see if it will sync.

How do I force the player to open in the center of my screen every time, and not way on the side?

How do I force the player to open in the center of my screen every time, and not way on the side?

Solution is very simple, Just choose firefox as your default browser.
Follow these steps :
* Open '''Options'''
* Click on '''Advanced'''
* Now open '''General''' tab and click on '''Make FireFox The Default Browser'''. See Image below.

Pr CC crash on render every time... and project appears mangled...

Similar Messages

Maybe you are looking for