PR creation at the time of release of external activity

dear,
is there any way to restrict system for creation of purchase requisition for material components only not for the external activity itself.
in our system setteings the pruchase requistion are created for extenal activitiy as well as for material componenets.
kindly reply
regrds
saqib usman

do not use external activity
use internal activity with material component - non stock for creating p req

Similar Messages

User Exit for ME21 PO Creation at the time of saving--Urgent

Hi,
Can some one help me out in finding the user exit for PO creation at the time of saving.
The Requirement is:
I need to create a custom field in EKKO table.
After appending the structure with the field to the EKKO table, i need to create a PO.
Now i need to update the field which has been created at the time of pressing the SAVE button.
I need to update the EKKO table it self.
I could find the user exits but none of them have the EKKO table either in Changing or in Tables.
Thanks,

Hi,
You may want to check this user exits.
EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving
EXIT_SAPMM06E_013 - Update Customer-Specific Data in Purchasing Document
Here is the list of available user exits for ME21.
EXIT_SAPMM06E_001 - Other Number Range or Own Document Number
EXIT_SAPMM06E_004 - User Exit for Cust.-Specific Control of Import Data Screens in Purchasing
EXIT_SAPMM06E_005 - Field Selection Control: Vendor Address Screen
EXIT_SAPMM06E_006 - Export Data to Customer Subscreen for Purchasing Document Header (PBO)
EXIT_SAPMM06E_007 - Export Data to Customer Subscreen for Purchasing Document Header (PAI)
EXIT_SAPMM06E_008 - Import Data from Customer Subscreen for Purchasing Document Header
EXIT_SAPMM06E_009 - Reset Customer Data at Beginning of New Document (Without Dialog)
EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving
EXIT_SAPMM06E_013 - Update Customer-Specific Data in Purchasing Document
EXIT_SAPMM06E_014 - Read Customer-Specific Data when Importing Purchasing Document
EXIT_SAPMM06E_016 - Export Data to Customer Subscreen for Purchasing Document Item (PBO)
EXIT_SAPMM06E_017 - Export Data to Customer Subscreen for Purchasing Document Item (PAI)
EXIT_SAPMM06E_018 - Import Data from Customer Subscreen for Purchasing Document Item
EXIT_SAPMM06E_020 - User Exit: Change Document for Requisitions (Conversion into PO)
EXIT_SAPMM06E_021 - Fulfillment of Target Value: Release Orders Against a Contract
<b>Reward points</b>
Regards

Serial number creation at the time of GI

Dear Experts,
I want to create sreial number and equipment number simultaneously at the time of GI
please hel m out with customization settings.
Thanks
Warm regards
Rahul

Using existing serial number is not giving me perfect solution.....
there is no validation of matching serial number which has been created before for that material
e.g.
if i am having one line item with quatity:10
At GR 10 serial numbers will be generated.
at GI he can assign any serial number to any material which is not desirable in my case.
Please let me know can we stop serial number creation at the time of GR?????
I want it should create only at the time of GI
Thanks
Rahul

Budget Error at the time of Release of Purchase order

Hi,
We are using former budgeting and getting budget payment budget exceeding error at the time of releasing a carry forward PO.
PO has been successfully carried forward to next year and we are not making any changes in the PO. While releasing the same via ME28, system is giving budget exceeding error.
Screens shot is attached herewith for reference.
Thanks in advance.

Hi Mar,
The root cause of the issue is incorrect updation of taxes value in EKPO table for that PO, which causes the system to consume less budget at the time of saving of PO.
Now while releasing the PO, system is checking for whole tax amount and sufficient budget is not available in the budget address.
Hope you able to connect the issue.....:P
Regards
Rohit Chopra

Windows not recognizing my time capsle - I just purchased a new computer that runs windows 8 and it doesn't want to recognize the time capsule as an external hard drive (ie doesn't show up under my compter). I've downloaded airport utility...

I just purchased a new computer that runs windows 8 and it doesn't want to recognize the time capsule as an external hard drive (ie doesn't show up under my compter). I've downloaded and run airport utility, but it seems to have a hard time finding the time capsule...maybe one out of 10 times it will find it.
What's more, when I look under network infrastructure under the control panel, it shows my Broadcom ADSL centurylink Router...so I'm wondering if my modem/router combo is overriding the router function on my timecapsule and the time capsule is not being used as a router...
Any help much appreciated!

In this case the TC should be in bridge mode.
Win8 is still problematic. Try using ethernet instead of wireless. I think the drivers are poor still and it is well worth having a try via ethernet if you haven't already.
Otherwise you will need to wait for apple to release bonjour for windows 8 and airport utility.. which is not out yet.
Also make sure the windows is set to home, not work or public.. even turn off the firewall.
Open windows explorer and type the TC ip address into the address bar.. (none of which is perhaps the same.. I gave away windows at vista.. shudder)
\\TCIPadderss.

HT201250 i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. do i keep my files in the portable hard disk when I connect it again with the macbook or the time machine will era

i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. Am i keeping my files in the portable hard disk when I will connect it again with the macbook or the time machine will erase all?
I would like to know if after I erase all my data, empy hard drive inside the macbook, the time machine will erase all my files that I have saved in my "WD "My passport" external hard drive

Welcome to Apple Support Communities
Time Machine has to erase the external disk in order to make backups. Before setting Time Machine up, copy the files of your external disk to the hard disk of the Mac in order not to lose them, and then, set up Time Machine. The first backup will start automatically.
If you want more information about Time Machine, read the Pondini's site > http://pondini.org

HT201250 How to backup the Time Capsule to an external drive using Time Machine?

Most of my data is on my Time Capsule since the hard drive on my iMac is too small for my music/movies/pictures and also so multiple devices can wirelessly access the data. I want to back up the files from my iMac and the Time Capsule on an external hard drive using the Time Machine. However, it seems that the Time Machine ignores the Time Capsule as a data source. How can I get this to work?

No, I don't believe this solves your problem.
TIme Machine can be used with a Time Capsule as a backup solution from connected macs and their drives but not from network drives, NAS or Time Capsules.
Thus, if you store files for LAN access on a TC internal drive, and want to back them to the USB/external drive attached to that TC, you cannot use Time Machine to do so.
Time Machine has not way of backing up ANY Time Capsule or NAS or WInPC or other networked drive, as far as I can tell. You will have to use some other backup software.
This is exactly what I bought the TC for myself (tried to use the internal drive on the TC as a NAS for my LAN, storing my music and photos and documents and bought a LaCie 2TB USB3 extneral drive to connect to the TC and hoped to be able to use Time Machine to backup the internal drive to the LaCie drive....but this does not work, as TM cannot backup from a network drive or TC device.

Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?

Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?

Yes.
1) Connect an Ethernet cable from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule
2) Go through the standard configuration suggested by the setup "wizard"
3) Then manually turn off the wireless function using AirPort Utility

How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

MobileMe service is finished.. to get remote access to the Mac or TC you use iCloud account.. but that is for files.. not to access web cams.
Without dyndns client in the TC, you can perhaps run dyndns on the computer or video recorder..many of these will have clients built into them.
Even better get a static Public IP from your ISP.. that is the correct professional way to do it.
Or you can use whatever broadband modem you have and remove the TC as the main router.. simply bridge it. Use your adsl router for connection. Almost all adsl have built in dyndns.
Sorry your language is very hard to follow.. and I am sure you are finding my answers similarly difficult.
Basically the TC is about the hardest device to setup because it is lacking important networking functions.
Get a vpn router and use vpn connection is far superior to any other method. But you cannot do it with TC.

Batch creation at the time of order creation & confirmation on the batch.

Hi all,
My client's requirement is while creation of the production order of say 100 pcs, system should create 4 batches, each of 25 (this might be different every time) of that order & also the confirmation (CO11) should be done on those batches.
Also if the order contains 10 operations then confirmation of operation no. 0020 should not be possible before confirmation of 10, whether it is for partial & whole quantity.
You can say these batches will reprsent the lots.
Regards
SmanS
Edited by: SAP PP Consultant on Mar 9, 2009 8:05 AM

Hi SAP PP
You can use this function to automatically create a batch for the material to be produced.
You can make the following settings in Customizing (production scheduling profile):
No automatic creation of batches in production orders
Automatic creation of batches during order creation
Automatic creation of batches during order release
To carry out automatic batch splitting via batch determination, proceed as follows:
Select the component that you wish to split and choose Component ® Batch management ® Trigger batch det.
The system lists all batches that meet the selection criteria and that have available stock on the requirements date.
Distribute the required quantity as required over the existing batches.
Choose .
The system copies each batch as a separate component into the component overview screen.
For more information refer to Batch Determination.
To carry out manual batch splitting with manual batch assignment, proceed as follows:
Select the component for which you want to carry out batch splitting. Choose Edit ® Insert ® Batch split.
Enter the batch number and the required quantity manually in the component.
Save your entry.
Regards
Sachin

No New Batch number creation at the time of Material Transfer Movement(309)

We are upgarding from 4.6C to ECC6.0. We have an issue in regards with the material movement type 309. At the time of creating the material tranfer using the same material as issuer and receiver, the same plant and storage location ( this process is used by the business to diferentiate batches).
In 4.6C a new batch number is created automatically when 309 movement is posted; stock and characteristics transfered are allocated at the new batch created automatically.
The same case in ECC6.0 does not create a new batch as done in 4.6C. We have looked for any SAP note or forum discussion without success.
If anybody has an answer for this issue, let us know.

As a matter of fact these configuration has been checked before, additionally we compare configuration at 4.6C and ECC6.0 and it is the same but the new batch creation (for this specific case) is working at 4.6C, not at ECC6.0.

Automatic Equipment creation at the time of Goods movement

Hi experts,
Can any one tell me where exactly the equipment creation happens at the time of GR creation, i mean program or function module.
thanks,
Veeru

Hello experts ,
Any response ??
Regards
Anis

User Creation at the time of Self Registration not via Admin (xelsysadm)

Hello there,
I had a question related to User Creation in OIM via Self Registration (Create Request) and via "xelsysadm" itself creating one user via the web console.
Can I do this -
When a user does self registration then how can I directly create a user in OIM?
Right now: the user's request needs to be approved by xelsysadm first and then only that user can login into OIM and then only that user can be seen in OIM - I want to remove the "xelsysadm" gateway of approving the request.
I want that user directly to be present in the OIM as soon as he/she fills out it's information in the self registration pages. How can we do this?
Also, I want an email to be sent to the user to its email ID that he/she provided at the time of self regn containing its User ID and password in it from the xelsysadm email id. How can I do that?
TIA for the help,
- oidm.

Hi oidm
User Registration is R.O. which used for User Self Registration.
But if you see it carefully, there's no Approve Task (not workflow) in it.
It has three task
1) SV
2) PI
3) AAD
And if you see the request while approval it shows Awaiting Approval Data means it stuck in AAD.
Try to modify this, I can't as I don have any extra machine with. Try to modify this. It may not allow you to update it, you'll have to change its security level in Database level.
*Awaiting Approval Data System Administrator [XELSYSADM] Pending*
I hope it helps you to start R n D.

Error at the time of Release of Cost Estimate

Hi All,
During the relase of Costing Run, we encountered with below error:
Valuation data for material X190191302 is locked by the user SOOKKWANC
Message no. M3024
We are getting the same error at the time of CK24..also checked the log in of this user ID:SOOKKWANC but found that this user is not accessing any t-code.
Please help.
Thanks..
Regards,
Vivek

Dear Vivek,
When releasing same material might be used in another transction by another user
At this point of time material gets locked
Kindly un-lock ( Delete ) the entries in SM12
Then proceed you issue will be solved
Regards
Madhu

Automatic equipment creation at the time of GR of material

Dear Experts ,
We have a non valuated material defined for a machine( in MM ) . It is managed in serial number .
Also the same machine is an equipment ( in PM ) & its maintenance is carried out accordingly .
We have defined a serial number profile , with equipment requirement as " always with equipment ".
Now we have assigned this serial number profile to the material master of the " Non Valuated Material " .
We observe that the system at the time of GR of the material accepts serial number & also in background creates equipments with construction type having the GR material & serial number as the one used in the GR .
But also the system always creates an equipment of the same equipment category & hence the same number range .
Our requirement is that different material masters wen received , shud create equipments automatically , but with different "predefined " equipment category & hence different number ranges.
HOW CAN THIS BE DONE ? WHAT ARE THE NECESSARY CONFIG STEPS THAT NEED TO BE CARRIED OUT FOR THE SAME ?
Regards

Dear,
For ur requierment u need to create different Sr. no. profiles with default eq. category in the Sr. No. profile and assign to material master.
T code- OIS2 for Sr.no. profile.
regards
sunil
Edited by: sunil gupta on Oct 26, 2009 12:48 PM

PR creation at the time of release of external activity

Similar Messages

Maybe you are looking for