PR date is after PO Date

Hi all ,
System should not allow to add a PR which creation date is after PO creation date.
System gives an error " PR date is after PO Date , addition not allowed "
Thanks in advance

Hi Shiva,
In the as per the given requirement why do you need this.
as in the industry, generally all the PR's are coming from the different Department and if PO has been created and after that another PR is being generated for the same material, why shouldnt the Purchasing person add the new PR in the old PO, as per the requirement the company can strike a better deal with the purchsing as they are procuring more items.
regards,
yawar Khan

Similar Messages

PARAMETER_EXCEPTION: Start date is after end date

WORKLOAD ANALYSIS (PORTAL ACTIVITY REPORTING) : PARAMETER_EXCEPTION: Start date is after end date.
Hello,
We get the above exception when we analyzed the extractor framework logs for EP Workload analysis extractor.
Can someone please advice.
Thanks
Srikanth M

Hi Nacho,
Could you please check if the Solution Manager time format for the user used for the Workload analysis is same as that of the monitored system. This error was caused in our landscape as the format in the monitored system was having a dd.mm.yyyy and that of the user in solman was mm.dd.yyyy. You can check the same in the transaction SU01 --> Change/Display --> Defaults tab --> Date format.
Thanks,
Lijin Xavier

Automatic remote key updation in data manager after a data import.

Hi experts,
I'm using SAP MDM 7.1 SP10 and after I do a data load via import manager my remote keys of lookup tables are updated. For example, lets just say I do a vendor mass load for some operating company for which I didn't maintain remote key for lookup table "Country" (figure Before load) and after the load its autometically updated in data mager (figure After load).
Before load.
After load.
I want to understand if its noramal SAP behaviour or not. If yes, how can i avoid this.
Thanks and regards
Shamit Prakash

Hello Ravi, I just want to leverage Shamit question :
I noticed the same behavior after the key mapping enable and the problem is : every time I import a file via Import manager now, when I check my mapping, sometimes a supplier that does not exist in my file is mapped with a different one from MDM. Previously the key mapping property was enabled, if this situation occurs in my import, as the supplier is a key in my map, this field would not be mapped and I had to correct my file or include this supplier in the database. Now, this became dangerous, as my import can map wrong information. Do i have another option to syndicate only changed records, without enable the key mapping ??? Example : use the selection Criteria in syndicator.

How to create a loop to run total of records for before and after unconstant date

Post Author: Ann2
CA Forum: Formula
Here is the data sample:
ID period code date
1 00 I    01/01/1999
1 00   Z   01/02/1999
1 00 G   12/05/1999
1 00 M   01/01/2000
There are many students with many periods and many codes. I need to save a date when code = 'G' and count separateley records per student/period 2 times - before and equal that date and after that date, so in the end for period 00 I will have 2 values: 3 (before) and 1(after).
There are periods from 00 to 08. I am counting students abscencies before and after warning letter was sent (code G).
The result data should look : 00 01 02 03 04 05 06 07 08              00 01 02 03 04 05 06 07 08     Total
                                            3 0   0   0   0   0   0   0   0                 1 0    0   0   0   0   0   0   0        4
Please help me.
Thank you.
Ann2

Post Author: Ann2
CA Forum: Formula
Thank you for your answer, but I do care about the date the 'G' happened, because I need to reset count.
The logic behind is this:if a student absent for more than 8 times per period - the letter will be sent out to the parents , that will be code 'G' with period '-1' (it may happen that there will never be code 'G' , but I need to track all absencies). Once the letter is sent, the count starts over (the count starts over the next day after code 'G'). The absencies which happened before or the date the letter sent should count toward 'previous' abscenices, all other - absenices after the letter.
So basically I need total per period and total per period before or the day with code 'G'. Running total with reset with formula code = 'G' does not work.
I created a formula field which has global date (when code 'G' happenned) and it says if globaldate >= periodDate then date (1900,01,01) else (2100,01,01) and that formula is ok, but I can not use it in running total or can not create group on it and insert total.
Please help me with this. Thank you.
Ann2

After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

No data in R/3 data source after extraction!

Hello All,
i am extracting the data from R/3 source system ( 4.7 ides system).
after succesffully transferring the data source and replicating it to the BW, i had created a infocube and scheduled the info package so that R/3 data source data gets uploaded into the Info cube created.
after scheduling in the header tab of monitor screen i found the error messege as "no data in R/3 data source, check your data source in R/3".
is it that data does not exist in R/3 Business content data source or is that data has not uploaded into BW?
can nay body here thorw some light onto it?
Ravi

Hi Ravi,
Please check the tables associated with your datasource and look if the data is available inthe respective tables.
You can also check the extracted records in T.code RSA3 in R/3 for your datasource.
Hope it helps!!!!
Regards,
Amit

Data Error in the Query/Report after selective data deletion for infocube

Hi Experts,
Please advise what i was missing and what went wrong...
I got a Query (Forecast) on a Multicube...which is based on 2 Infocubes with Aggregates...
As i identified some data discrepency..yesteraday i performed selective data deleation on one of the Infocube
and executed report yesteraday and the results in the query are correct...
When today i executed the same report i am getting different results..
When i compared the results of the report with that of data in cube they are not matching
The report is not displaying the data in cube..for some rows it is displaying the data in the cube but for some rows it is just displaying same as the above row
there is no data loaded into info cube after selective deleation
Do i need to perform request compression and fill the aggregated after selective deleation
Please advise what went wrong

Hi Venkat,
No i haven't done anything on aggregates before or after selective delete
As there is not data load after the selective delete according to SAP Manual we don't need to perform any thing on aggregates...as selective data deletion on cube will delete data from aggregates as well
Please update how to identify error

Save and refresh after entering data inoto table.

hello guys,
im using abap webdynpro now. and im facing a problem with the saving and update " refresh function"
I have entry table and some other text input.
the thing im doing is to enter data in the filed, attachment, drop down selection. then the data will be saved into the table in the same page
and need to refresh the page automaticlly when doing this. so the used does not have to do it manully
please help me in this..code, source, or hints.
Thanks
Lily

well , the guys guid me to some ideas.
yes..after entering data into filed, textinput. the data will goes to the table after clicking " save" button. after that I want the table to be updated.
thanks

Posting of cancelled Invoice after posting date is over

Hello Experts,
I am stuck up with a situation and as such seek your help.
A invoice was generated and the subsequent accounting document was also cleared. Now after the posting date was over, someone cancelled the invoice by T.code VF11 and as expected it didnt get posted .The document flow showing is as per below :
Order - open
Invoice - completed
Accounting Document - Cleared
Cancel Invoice - Open
Now, the business and their audit policies do not allow the client to cancel the invoice in back date ( within the posting period).
What are the options do we have to tackle the situation.
Joy

The issue has been temporarily addressed by changing the posting date.
However, now the client wants us to make an ABAP development so that no user is able to cancel the invoice after posting date is over. Now for that I have the following issues. Can someone please help me out in this.
The basic process details I am following is as per below:
For Transaction Code VF11 (i.e for Cancellation of Invoice) , when the invoice number which is subject to cancellation is provided, the System should search in VBRK table for the following :-
1)The System will at first search whether the entry exists or not. If the Entry is not valid then it should give an message u201C Document xxxxx does not Existu201D.This is in line to the existing practice.
2) If the Document number is valid then it will go to the billing date field and will fetch the value from the VBRK table . Then it will match whether the value fetched (i.e. this Invoice date) is in present posting period or not. The system can find the posting period from the table V_T001B.
a.If the Invoice date lies in the present posting period then the system will allow the cancellation document to be saved. This is in line to the existing process.
b.If the Invoice date lies beyond the present posting period then the system will not allow to save the cancellation of the Invoice with a pop up message of u201C The Document number subject to cancellation do not lie within the present posting periodu201D .
Now We have looked both the tables, from VBRK we will get Doc# and Billing date(FKDAT) but when we select Posting Date from table T001B( Permitted Posting Periods) there is some issue.
1. What will be the condition for selecting records from T001B table.Since there is multiple key fields
    RRCTY (Record Type) ,
    BUKRS (Posting Period Variant) ,
    MKOAR (Account Type or Masking)
    BKONT (To Account).
So, to get unique record what will be the value of this key fields. Is there any relationship with VBRK table ?
2. Which field I have to consider as Posting Date or Period. Because there are many fields related to Posting period.

Lose data types after model saving

Hi all.
I try to import model from erwin 7.3 in data modeler Version 3.0.0.665
after import i have this log:
Oracle SQL Developer Data Modeler 3.0.0.665
Oracle SQL Developer Data Modeler Import Log
Date and Time: 2011-09-20 16:31:22 MSD
Design Name: DPO
Import Finished
Errors: 0
Warnings: 0
i receive similar model as erwin-model. but afeter saving and reopening almost all datatype set as UNKNOWN. what`s wrong?
i try change type for one column from UNKNOWN to NUMBER and again save/reopen. this change was saving.
how i can save source datatypes after import model?
screenshots:
before saving http://s016.radikal.ru/i336/1109/dc/16cf0ab0c7df.jpg
after saving http://s011.radikal.ru/i315/1109/7a/808bded51f7b.jpg
Edited by: Finch on 20.09.2011 6:15

Hello,
I have no definitive idea as to why you are losing the dataypes, though I suspect it has to do with setting the Design Rules under the Tools option.
The suggestion I want to make is that you generate the DDL from Erwin and and import this and save, all data types should save, they have for me. Also Have found the DDL import to be the most reliable along with importing from Oracle Designer and Oracle database data dictionaries.
If you have logical objects you want to transfer over then I would advise export Erwin to Oracle Designer and import to SQL Data Modeler.
If you go through the threads on this forum you are no alone in finding issues with Erwin import.
Hope that helps.
Yusef

LOG_FILE_NOT_FOUND when running cleaner manually after some data purge

I hit LOG_FILE_NOT_FOUND error when running cleaner manually after some data purge, I searched the forum, found someone also faced the same issue before, but cannot find any clue on how to fix it. Below is the error trace and followed by our configurations
Caused by: com.sleepycat.je.EnvironmentFailureException: (JE 4.1.6)
Environment must be closed, caused by:
com.sleepycat.je.EnvironmentFailureException: Environment invalid because of
previous exception: (JE 4.1.6) /scratch/tie/thirdeye/index/data-store
fetchTarget of 0x50f/0x3fb9dd6 parent IN=368491717 IN
class=com.sleepycat.je.tree.IN lastFullVersion=0x510/0x2ca7d18
parent.getDirty()=false state=0 LOG_FILE_NOT_FOUND: Log file missing, log is
likely invalid. Environment is invalid and must be closed.
at
com.sleepycat.je.EnvironmentFailureException.wrapSelf(EnvironmentFailureExcept
ion.java:196)
at
com.sleepycat.je.dbi.EnvironmentImpl.checkIfInvalid(EnvironmentImpl.java:1439)
at com.sleepycat.je.Environment.checkEnv(Environment.java:2117)
at com.sleepycat.je.Environment.checkpoint(Environment.java:1440)
at
com.oracle.thirdeye.datastore.DataStoreManager.clean(DataStoreManager.java:402
at
com.oracle.thirdeye.infostore.InfoStoreManager.clean(InfoStoreManager.java:301
... 11 more
Caused by: com.sleepycat.je.EnvironmentFailureException: Environment invalid
because of previous exception: (JE 4.1.10)
/scratch/tie/thirdeye/index/data-store fetchTarget of 0x50f/0x3fb9dd6 parent
IN=368491717 IN class=com.sleepycat.je.tree.IN
lastFullVersion=0x510/0x2ca7d18 parent.getDirty()=false state=0
LOG_FILE_NOT_FOUND: Log file missing, log is likely invalid. Environment is
invalid and must be closed.
at com.sleepycat.je.tree.IN.fetchTarget(IN.java:1332)
at com.sleepycat.je.tree.IN.findParent(IN.java:2886)
at com.sleepycat.je.tree.Tree.getParentINForChildIN(Tree.java:881)
at com.sleepycat.je.tree.Tree.getParentINForChildIN(Tree.java:809)
at
com.sleepycat.je.cleaner.FileProcessor.findINInTree(FileProcessor.java:1152)
at com.sleepycat.je.cleaner.FileProcessor.processIN(FileProcessor.java:1090)
at
com.sleepycat.je.cleaner.FileProcessor.processFile(FileProcessor.java:538)
at com.sleepycat.je.cleaner.FileProcessor.doClean(FileProcessor.java:241)
at com.sleepycat.je.cleaner.Cleaner.doClean(Cleaner.java:463)
------------Configurations-------------------------
EnvironmentConfig.ENV_RUN_CLEANER -> false
EnvironmentConfig.CHECKPOINTER_HIGH_PRIORITY -> true
EnvironmentConfig.CLEANER_EXPUNGE -> false
Any hints are appreciated. I'm also working for Oracle CDC, feel free to call me at 861065151679 or drop me an email at [email protected] so that we can talk more in detail
Anfernee

Anfernee, I will contact you via email.
--mark

Address data changed after invoice is created

Hi,
I've a problem to solve and it's related with data changed after invoice is created.
The scenario is the follow:
1º - create a complete and standard sales process - order => delivery => invoice, with the standard partner scheme and without edit the address data, for any kind of partner
2ª after the invoice is created, I change the address data on Client Master Data, for the same client that I've used on previous process
3º I'll go to the VF03 transaction and take a look at the partner data on header level. Here I can see that the changes on the Client Master Data ar updated to the invoice document wich is already created and printed when I maked the changes
I think that could be a program error because, once the documento is created, you only can change texts and accounts if this document is not yet created.
And, I can't edit this kind of data on invoice creation because it must be done at order level.
So I don't understand why it happen, but it happen on more than one client.
I'll hope that anyone can help me to solve this issue.
Kind regards,
Nuno Rodrigues

Hi Nuno,
the adresses of all Clients are stored in table adrc. If there are no changes in the order, the system takes the standard adress of the client. That is made for not having an extra adress for each order.
If you change the adress - the system will create a new adressnumber ( 999........ - see in VBPA ).
If you have different adressnumbers in your orders, you are not able th collect several orders into one delivery note - for the adressnumber ist normally a split-criteria.
Ich you will have an extra Adress for each Order, change the adress - for example by an user exit.
But if you have different adressnumbers - the delivery and the invoice will split the different orders - if you dont do something against in an user-exit.
Hans

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old.

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old. It;s been working perfectly up until now. I have no problem on my home WIFI, or through personal hotspot working through my iPhone 5.
I have worked with AT&T, replaced the SIM card with a new one, and done a backup/restore to factory settings, all with the same result that when I turn Cellular
Data on, with or without Enable LTE, it goes into "searching" mode, or reports "no service". My iPhone 5 works perfectly on iOS 8.1.2, on Cellular. I've browsed the blogs and have tried Apple's suggested fix, all to no result.
Oddly enough, every once in a while I do get connected to the network for a short ime (minutes), but it always returns to "searching".
I've filed a report with Apple, along with a request that they contact me, but no results yet.
Help? (and thank you).

Hello razmee209. Thank you for your response. I spent the better part of yesterday working with Apple Support. They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total. Same problem. I restored from the cloud to recover my apps, same problem.
AT&T installed a new sim card - same problem. I spent time with AT&T Support yesterday, too. In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
I didn't have this issue before I upgraded to iOS 8.1.2.
Everything else with the iPad works fine: WIFI, Personal Hotspot, email, all my apps, etc.
In browsing the web for this issue I see that many other folks have the same problem. I filed a report with Apple this morning, requesting that they contact me, but no word yet. I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
Thanks again for your response and suggestions.

How to Raise New Pop-Up After OVS Data Selection

Hi,
In my development i've done one custom search help(OVS) for one field. When i'll select ovs,there i'm fetching data from DB and showing. After selection of data from OVS means in Phase-3 i've some validation based on selected data. if selected data is wrong then i need to raise one popup and have to display some data from other DB. i tried in phase-3,raised popup method but no use its closing pahse of OVS,its simply closing the OVS.
Regards,
Jack.

Hi Jack,
Jack sparrow wrote:
if selected data is wrong then i need to raise one popup and have to display some data from other DB.
I think, the selected data from ovs cannot be wrong in any means, as you are populating the help list for the user and search help hit list should be always having valid data
Once user selects data from ovs, it reaches the final phase of OVS cycle and hence it closes automatically.
Instead, I suggest you to restrict the user at PHASE2, i.e. while user searches for specific list of help data, you can validate the input and if his/her search is valid, you can fetch data accordingly and populate the hit list.
Please refer the below document:
How to validate the fields on OVS window - Webdynpro ABAP
Hope this helps you.
Regards,
Rama

URGENT HELP NEEDED!!! No data connectivity after a while, weird errors

I am using T-Mobile's regular prepaid web plan and Wi-Fi just fine, no need for BIS, Rich Email, or BBM (SMS and MMS is just fine). All I ever use are apps that SPECIFICALLY state that they work over standard TCP/IP and Wi-Fi. The problem is, after some time, the apps that one worked over regular data connections and MMS don't connect anymore. Even though the apps said that no BIS is needed, they can't access data. Even RIM's own Facebook app, which claims to work over Wi-Fi (and does) loses data connectivity after a day or so without a full reboot. The only thing that works is the BlackBerry Browser, which still connects to the internet. Along with the apps failing to work, MMS messages also can't be sent.
Rebooting the phone by a battery pull or alt-shift-delete allows the apps and MMS to work, which after a day (sometimes even shorter) stops working again.
Here's what I've done so far:
- Checked and made sure that all permissions for data access
- Checked that my APN settings are correct: epc.tmobile.com
- Checked my Wi-Fi router for connectivity
- Called T-Mobile tech support for help, wiped my phone upon their instruction
- Reinstalled my apps and contacts, T-Mobile sent me new service books
Still the SAME THING with apps and MMS not working after a while. I've narrowed it down to entries in the event log that show up as this, which shows up seconds before my apps and MMS stop working:
a net.rim.hrtRT - PUpI - 9/23 17:06:58
a net.rim.hrtRT - EPdp 0x3 - 9/23 17:06:58
a net.rim.tunnel - Clos-blackberry.net - 9/23 17:06:58
a net.rim.hrtRT - CClG 0x2 - 9/23 17:06:58
W net.rim.hrtRT - XMax - 9/23 17:06:58
W net.rim.hrtRT - XBad - 9/23 17:06:58
E net.rim.mdp - TEma - 9/23 17:06:58
W net.rim.mdp - TDtm - 9/23 17:06:58
i net.rim.mdp - TTex - 9/23 17:06:58
Can any experts or developers tell me what these Warnings and Errors mean? I am pretty sure that whatever "net.rim.mdp" and "net.rim.hrtRT" is doing isn't good.

anyone care to help???
Also, on the 18th I wiped my phone again, and three days later (longest time with no mdp error) the same error occurred in the event log, no internet connectivity afterwards on Wi-Fi or Mobile Network...
The Tunnel Engineering Screen under Multi-WAF Encineering Screens shows the following:
1 VPN <7.105.226.218>
Tunnel ID: 1
Tunnel Type: VPN
Tunnel State: UNEXPECTED ERROR
Tunnal IP Address: 7.105.226.218
2 WLAN <192.168.1.x>
Tunnel ID: 2
Tunnel Type: WLAN
Tunnel State: UNEXPECTED ERROR
Tunnel IP Address: 192.168.1.x
3 3GPP blackberry.net <22.185.134.169>
Tunnel ID: 3
Tunnel Type: 3GPP
Tunnel State: UNEXPECTED ERROR
Tunnel IP Address: 22.185.134.169
4 3GPP epc.tmobile.com <26.203.192.238>
Tunnel ID: 4
Tunnel Type: 3GPP
Tunnel State: UNEXPECTED ERROR (shows OPEN_READY only when browsing webpages)
Tunnel IP Address: 26.203.192.238
Something tells me that the tunnels are being blocked, since closing and recreating them does the same thing. Anyone else have this problem???

PR date is after PO Date

Similar Messages

Maybe you are looking for