PR Feild selection

Hi Experts
With ref. to the above subject I want the Short text feild in display mode except for item category D. I have maintained the same in PT9B. But if I choose account assignment K it is allowing to create without material number and only with material descrription

yes system will allow you to create a pr or a po  w/o material code and by just giving the material description
as this material is assumede to be for direct consumption and not for the stock purpose and as u said that u have used the field selection key to make that field as in display mode then let me tell u one thing that
there are 7 factors which affects the status of a field
u have made the field descpr. as dispaly mode for one of the fatcors but still there are other facots left and due to which u are still able to put the description

Similar Messages

  • FBL5N - Feild selection non editable mode

    Hi All,
    When i execute FBL5N transaction,i am not able to select the feilds as per my desire bcoz the feild display ICON is in non editable mode.
    The only option i have is layout selection and not the feilds selection.
    Can you let me know how to change it to editable mode.
    regards

    Hello,
    You don't have authorization for maintain ALV layouts. Please contact to your Basis department for authorization.
    ALV layout authorization object is S_ALV_LAYO. Please tell your Basis departman to give this object value for '23'.
    Regards,
    Burak

  • Feild selection in MM01

    Hi, my goal is to make the a certain tab in the Material master as required or optional.
    I know I can go to feild selection groups and copy from a standard feild and assign that to a plant specific. But the thing is I want to make it material type specific i.e if I go to MM01 and select my specific material I should get a tab (Ex:material group) as optional.
    The second thing is I have a material zlabel copied from the standard material type and how do I make certain views a must like basic, sales, purchasing etc...is it possible...I can make only these views available in OMS2 but ...I mean if I have 6 views showing and 3 must be a must in MM01... is it poosible.
    And the third is the material type zlabel ..its view did not have material group as required when I select sales views, but when I select purchasing view it becomes a must, is it connect to views...I need to remove this ...please explain..
    I know these are a lot of questions at once.....and may take twice to read them ...if they are confusing just say and I will repost it
    Thanks ...

    Hi
    To make field optional and mandatory you have to go to Field selction for the material and there you must assign the field to a field selection group.For this you maust know on which data screen and what field you have make field mandatory.Create and maintain field references For example in your case you want the purchasel group in the purchasing MARC-EKGRP check the field refernce and select field selection group of the material type and there  you can change change the assignment of fields to field selection groups as required.
    for the selection of the view sgo to define attribute of material type there you can click the material type for which you wanna to do select the views which you wanna to maintain.
    regards

  • Maintain Condition Record (MEK1)- Change feild selection.

    Hi All,
    I have requirement to change the screen selection of MEk1 transaction.
    Note: The issue is about feild selection in MEk1, not about key combination feilds.
    Please help,
    Thanks in advance,
    Regards,
    Naidu

    Hi Naidu,
    I'm not able to understand ur question, see the selection itself is your requirement based on that system will ask you for input & you can control this via tables attached in access sequence, then where is the question of changing fields. in case if you don't want any particualr field means in simple don't include that table in screen sequence.
    anyway it's interesting i'm checking on this will post u if i'm able to findout.
    Regards
    Rang

  • Contract Create,Change feild selection while processing a contract

    SAP Gurus,
    In create contract feild selection i maintaned one feild mandatory and change contract i dont want to appear that feild as mandatory.
    Create Contract - Field Selection ZES
    Chnage Contract - Field Selection ZMS
    But one feild selection only will be assigned to a contract document type.
    Where exactly i have to configure,Let me know and please suggest me.
    But i want these two thing should get captured in the contract create and change
    Thanks,
    Alam.Sivakumar

    hi,
    please check
    Materials Management -- purchasing -- Contract --Define Screen Layout at Document Level
    Select Create and assign
    Select Change and assign

  • Feild Selection of Delivery Schedule in AFS PR

    Dear all,
    Where can we find the field selection for PR - Delivery Schedule,  AFS Purchase Requisition
    Requirement: The schedule qty field in PR - Item Details - Delivery Schedule tab should be in display mode.
    Thanks in advance,
    regards,
    Kumar

    Dear all,
    Tried by making the schedule qty invisible in the config of PR - Item Details,, after saving the variant, still the schedule qty is visible,, please help
    regards,
    Kumar

  • Feild selection for Mvt types

    Hi:
    I want to modify 501 561 and 563movement type  where I want to enter Vendor Batch Number at line item level for batch managed material. How do I get this field on the screen for the movement type with transaction MB1C or MIGO.
    I have tried OMJX, OMCJ.
    Regards
    SE

    Hi,
    This is not possible because the influencing fields functionality is not available for MIGO. You can also check the note 329334 which explains this.
    There are also no exits BADIS for this purpose until now.
    Regards,
    Rajesh.

  • How to make reference feild (XBLNR) mandatory in MIRO transaction code.

    Dear Team,
    please let me know how can we make this XBLNR (reference) feild in MIRO as a mandatory. i didn't find any feild selection for invoice verification in SPRO - LIV.
    your kind cooperation is needed.
    Vijay

    Hi Vijay,
    Go to the transaction OMR4,select the topone document type and select the document type
    RE for Gross Invoice or any required document type then click on details in the bottom you can see the refference field ,select and save .
    Regards,
    Cherry KLN

  • CAT2 - making user defined feild visible in profile

    Hello ,
    am facing a issue ,
    I need to create a New profile in CAC1 [ done] by coping the already existing profile.
    IN already existing profile we have made DISPLAY settings to "CATS_ADDFI-FIELD1" - Additional field 1. This is defined as ACTIVITY DESCRIPTION. This is working fine for existing profile in CAT2 tim sheet booking. In CAC5 the Activity description is defined against YYACTVITY.fine.
    Now how to make Activity description column visible in DATA ENTRY AREA in CAT2 for my new defined view . Currently I am not able to see as its in invisible mode.
    Help me as its very urgent
    regards
    Msamba

    Hello ,
    Solution :
    I could solve the problem . In CAC2 , I have selected screens thru INFLUENCINg tab and selected the profile. But I have not set chnages in global template . Means when u go in CAC2 , there is a global template for data entry profile , This needs to be chnages first and then chnages in Influencing tab .
    Now my second questions:
    My client needs sowm shuffle in data entry area  for Eg: Work center should follow behind wage type. I have request them that create the changes and then save under new Varient . My client is not happy with VARIANT creation in CAT2 nor making it default as global.They dont wanna create any Varient but they wannt to fix the feild selection as they desired under BASIC SETTINGS.
    Can we do this ? Can we chnage the feild selection under BASIC SETTINGS.?? or is theer any configuration to assign the columns to our desired way in WORK LIST or DATA ENTRY AREA??
    Please advice.
    Edited by: msamba on Jul 26, 2011 9:11 AM

  • Compose an Email - How to modify this feild?

    This feild in red circle bellow, is a nice feature in the selection of quick contacts to send emails.   It had always defaulted to the most common email address I would send through the z10.. But today this feild is another address.  Does anyone know ho to modify or to add your favorite contacts? I know as you select, it will add to the email recipient, how are the workings of this feild selected.. ?

    Is there more discussion about this feature anywhere? I am having trouble finding support for answering some questions about it.
    - like, where is this field information stored?
    - having the two frequent email addresses shown is nice, but what about the third one? It seems like you should be able to swipe / pan over to the next one.
    - How do I eliminate one of what the Z10 wants me to have there?  Especially, if I have a lengthy exchange with a support issue or something, and I don't want to see [email protected] permanently in that location until I email [email protected] enough times to move it to a place of honor.
    - I really like the associated emails feature, where you can select one of those frequent two, and others that you typically cc will appear as well.  However, where are those addresses stored? I would like to be able to add those cc's in some easy fashion to my Contacts - like, an "add all" feature or something.  For those suggested cc's in the list, why don't they pop up as a suggestion when you begin typing? For instance, if one of the two email addresses is [email protected], if I compose an email and begin typing in the "to" or "cc" field "MyF . . ." I can select [email protected] only if that entry is already in my Contacts. How do I transfer all the other emails that are obivously stored somewhere to my contacts?

  • Report for po order quantity

    hi there
    i want to get the report for p/o order quantity as well open order quantity
    if it is there in sap let me know soon
    waiting for your response

    Tcode: SQVI
    Table: EKPO
    Select delivery completion idicator and PO order quantity in "List Feild Selection".
    This will display PO order quantity and if DCI is set.
    Try to join table to get desired result.
    Tcode ME2N with selection parameter M-OFFEN gives Open POs

  • Validation for PO text in the material master.

    Hi experts,
    I am trying to do a validation on the Purchase Order Text (long text) which must always be filled in Language EN and DE.
    Thus if a user tries to edit a material in MM02 or creates a new one in MM01 - this box of long text (PO text) must be filled, else it should throw an error.
    i created a BADI and inside that i am calling the FM read_text , but it check for only existing text already saved in the database.
    WHAT ABOUT THE RUN-TIME (ex  creating a material).
    or what if the user purposely deletes an existing PO long text and then tries to save it (database might already have a PO long text saved for that material).
    Kindly help me if there is any FM which can be called to check in the Runtime if the PO long text is filled or if we can do some customizing and make that PO long text Mandatory.
    Please not we need this field mandatory only for only 03 plants, that's where the problem is coming.
    Many Many thanks in advance.
    Rittik.

    Hi,
    You can maitain the PO text of material master record in english and german. To do this goto POtext view below languages maintained create icon will be there select that give the english language, enter the text in english and save. Again select german and enter the PO text.
    To get the PO text view mandatory , go to SPRO, logistic general, material master, fielld selection,define plant specific feild selection and plant specific screen selection. For 3 plants you can configure here.Hence the POtext view will be mandatory and gives error if not maintained. I hope this will resolve your issue. Thanking you.

  • Problem of GL ACCT in PO creation

    while creating PO for consumables materials (widout mat master) following error appears.
    " GL acct No. 55000104 can not be used. (please correct)
    Msg. No. ME 045
    Diagnosis: Comparison of the field selection string from GL acct 55000101 & account assignment category K reveals that there is an incompatible combination of field selection for field group & cost center.
    The GL acct field selection is stored in Table T 004F, that for acct assignment is stored in table T162K.
    Can anyone guide for the solution.
    Thanks in advance

    Hello Sap,
    This is a field compatibility issue..
    You can check with FI Person for setting it...
    Else..
    If you know the Field Status Variant Assigned to Your co.cd.
    Just go to Transaction :OBC4 and check for the co.cd
    Also take the field status group assigned to your GL Acct:55000101 from FS00,
    Check the Feild selection for the Status Variant v's Field status grop in OBC4 by double clicking on Field Status Grop on to the left of table...a
    select Accunt Assignments..and you can change the Field Status to Supress,Optional,Required.
    Now again do the process of creating PO for consumables,it will allow
    Hope this resolves your issue
    please let me know
    Arshad

  • How to assign fields in rdf in coldfusion

    Hi,
    This is chitti iam facing problem in cold fusion with rdf?
    How to assign dublincore field to rdf file in xml? iam trying
    this is this the correct way or not?
    iam posting image with metadata into database

    Hi
             Go to acessseqence and then select the particular table which u have added or ammended select the table and click feilds tab and after u go in to feilds select each feild and press enter and save do this for evry line in each field and after completing
    evry feild save and exit ....ur problem will be solved otherwise
    AccessSequence -> select table -> click on fields -> select the field with error and click on field catalog .
    From there select the field name manually and save .
    and please refer this link..
    Access sequence Issue
    Hope it will be help-full for you
    Thanks..

  • What is setting required for Price Contol do the optional entery in master.

    Hi SAP EXPERT,
    What is setting required for Price Contol do the optional entery in Material master ?
    Regards
    Mahendra
    Edited by: MAHENDRA  NAVALE on Aug 27, 2011 2:23 PM

    HI
    In general in the material master record you can, hide display or optional for a field, but there are certain feilds should be mandatory for material creation,like base unit of measure,material description,and price contro,l valuation price,valuation class,without this you cannot create a purchase order.
    If you dont want to the price control means go for mateial type  non valuated material NLAG. because the price control is mainly linked with the material  valuation. based on the the price control  the price difference will post either sock account or price difference account.
    Goto>MM>LOGISTICS GENERAL>MATERIAL MASTER>FEILD SELECTION >ASSIGN FEILD SELECTION TO FEILD SELECTIN GROUPS(OMSR) >CHECK YOUR FEILD REFERENCE FOR PRICE CONTROL (MBEW-VPRSV) FEILD REFERNCE GROUP IS 32* > AND GOTO MAINTAIN FEILD REFERENCE FOR DATA SCREENS (OMS9) >ENTER  YOUR FEILD SELECTIN GROUP 32 (PRICE CONTROL )AND  CHOOSE MM01 MAKE IT FROM REQUIRED  TO OPTIONAL.
    Thanks
    Edited by: Nijamudeen**MM on Aug 29, 2011 10:19 AM

Maybe you are looking for