PR generation through BOM transfer

Hi
We are facing problem in BOM transfer. After BOM transfer , system is generating two PRs for 1 material. In network component view , the material is appearing twice one with BOM item no 0000 and one with BOM item 0010. But material exists only once in BOM.
What may be the cause for this?
Regards,
Amit

Hi,
Please check SAP note:739440 has any relevance for you.
Quote from the note begins:
"You assign a BOM to a using Transaction CN33. When reassigning the BOM double requirements are created in the network.
Other terms
CN33, BOM explosion
Reason and Prerequisites
The "Alternative BOM" field on the selection screen of Transaction CN33 is the cause of the problem. It is set partly on initial or on 1. This should not make any difference, however, in the further selection the already assigned BOM is not recognized and thus assigned again.
Solution
Implement the program corrections as specified in the attached correction instructions
Quote ends
Muraleedharan.R
091 9880028904

Similar Messages

  • Error in multilevel BOM transfer using CN33

    Dear all,
    I am facing one issue in BOM transfer to the project using transaction CN33.
    Here we are transferring multilevel BOM to the project.
    We are having BOM structure as FERT material A below which we have material B and below B i have material C. Now while transferring we are transferring all A, B as well as C to project.
    While transferring BOM in selection parameters i am selecting both Multilevel as well as Prel. requ. indicator.
    When we do MRP run, for component C planned order are getting generated twice whereas for Component D the planned orders are getting generated thrice.
    Regards,
    sudhir

    Hi,
    I would prefer- direct BOM material(Header) assignment in Project, and it generates requirements properly after MRP Run, instead of transferring all materials to project through CN33.
    Venkatesh

  • Excise Invoice generation during stock transfer

    Hello All,
    For an excisable item it is a rule in indian localization whenever the goods leave the warehouse it has to carry a proper excise document. This is possible in case of a delivery. But how to manage this in case of stock transfer? When the excisable goods are transfered from one warehouse to another then a excise invoice is to be generated. How can this be managed in SAP Business One? Please suggest.I am using SAP Business One 2005B PL 41
    Regards,
    Debraj

    This Functionality is not available in SAP 2005B.
    As a workaround,
    Create Journal Entry for Excise Duty & VAT
    For Excise Invoice, create a seperare PLD in Inventory Transfer Screen
    Note:
    This feature of Excise Invoice generation during stock transfer is available in SAP 2007B
    Edited by: Sridharan T on Sep 8, 2008 3:10 PM

  • How do i get a Base code (Material) from a description through BOM?

    Hi,
    the right base code(material) for the production order '68647' is 100827 descriotion 'PIPE BASIC' .
    my requirement is i have an production order and relevent plant, how do i get a basecode ?
    from my previous finding i read that All BOMs will have are associated with the description.
    Targeting this description will always return the right base code for the order.
    but i did not get any idea out of it.
    Please tell me how do i get a Base code (Material) from a description through BOM?
    Thanks in advance.
    Edited by: gulab zehra on Sep 22, 2009 9:17 AM

    Hi Keven,
    I had a look at the example "programmaticbuild2.vi" that you can find at this link:
    in this application the error that eventually comes out from the "BuildTargetBuildSpecification.vi" is written in the error_log.txt through a case structure.
    You can change the code inside the Error case if you want to handle the error in a different way. For example you could connect the error wire to a General Error Handler, that displays a message if an error occurs, or you could light up a led that inform you the error has occurred.
    Best regards,
    Serena M.

  • Can i pay through bank transfer?

    can i pay the product through the transfer of money from the bank?If yes how do i change it from using debit card?

    Welcome to the Support Communities. The Apple Store (UK) allows Wire Transfer — see under that heading here:
    http://store.apple.com/uk/help/payments
    The Apple Store (US) says:
    "Bill Me Later©, business lease, wire transfers, cashier's checks, and money orders are ineligible payment methods for pickup items. (...) Some customers may qualify for other forms of payment. Please call an Apple Store Specialist at 1-800-MY-APPLE for more information."
    http://store.apple.com/us/help/payments

  • Error_Text 3100000030802447 ID MATK language EN not found during BOM transf

    Hi Experts,
    When the user do the BOM transfer , they got the error message : Text 3100000000308020447 ID MATK language EN not found.
    Message no. TD600
    Diagnosis :
    You want to read a text which doese not exist in the data base ( or update memory )
    System response :
    Reading could not be carried out.
    Procedure :
    You need to create this text.
    1 . Initializaion ( module INIT_TEXT )
    Could someone help me to solve ?
    BR, Shubin

    Hi Virendra,
    Thanks a lot  !
    BR , Shubin

  • Setup awr generation through script

    how can i setup awr report generation through product UI pag?
    using oracle 11g enterprise edition.. please help.
    if steps provided appreaciated.

    Hi,
    I think you can use this
    Generating the AWR Report
    Regards

  • Job worker billing analysis and verification through stock transfer note

    Dear All,
    We give all the material to your job work location and then we get the material packed by our job worker and then we give our job worker packing charges as per the following:
    1. Sulphuric Acid 5 L = Rs.10/- per unit
    2. Nitric Acid 25L = Rs.50/- per unit.
    Like this.
    So tell me how should i maintain the job work charges against each FG for the job work, so that at the end of month i can download their monthly bill report through dispatches which they have made between that period.
    Kindly also tell me the code which i should use to check their monthly job work bills through dispatch done through stock transfer note.
    Regards,
    Phalgun Patel

    Hi Phalgun,
    Mr. Muhammad is right. You have to use Subcontracting process for your requirement.
    Just go through below link which gives you standard SAP Subcontracting process with configuration.
    http://help.sap.com/bp_bl603/BBLibrary/HTML/138_EN_IN.htm
    And also some other links as below.
    http://www.sap-img.com/materials/sub-contracting-cycle.htm
    http://www.sap-img.com/materials/subcontracting-key-points.htm
    http://www.sap-img.com/materials/what-is-subsequent-adjustment-in-process-of-subcontracting.htm
    Please check and revert if you have further queries.
    Regards,
    Hiren Ramani

  • Can iPod Touch be infected through the transfer of mp3 and photos?

    Can iPod Touch be infected through the transfer od mp3 an photos?

    Anything is possible but I am not aware of it happening.  What is possible is to get an infected item on the iPod where it will cause no problem and then transfer it to a PC where it could cause a problem.

  • HT3215 Can I charge my apple Ipod touch 4th generation through the headphone jack

    Can I charge my apple Ipod touch 4th generation through the headphone jack

    Stedman1 is right, can not be done. What made you think you could? Just curious.

  • Estimating complexity of template generation through Adobe LiveCycle...

    Hi,
    I need to estimate the effort based on low, medium and high complexity of templates generation through Adobe Livecycle. Suggest if there is any benchmark figures available for the same.
    Please help to provide the same.
    Thanks and regards,
    Mayank

    Shawn,
    This may be a couple of known things; one is related to your specific installation (may have become corrupted if you did an upgrade from a previous version, especially if you upgraded from Beta?) Or, it may be related to a known SQL Server compatibility bug for which a hotfix will shortly be posted. (Problem with some Microsoft DLLs that get updated if you install SQL server).
    If you have SQL Server installed, try looking on these forums for a patch that should be posted within the next 2 days. If not - please contact me directly, as I'd like to get someone on my development team to help look through your installation and see what the problem is, so we can fix this properly.
    Mike

  • Vendor payment through bank transfer

    Hi,
    Is there any way of doing bank transfer using a manual transaction (i.e.other than F110) ? My customer wants to do the vendor payment by bank transfer similar to the cheque payment which we do through F-53 & F-58.
    Regards,
    Krishna A S V

    Bank Transfer involves the payment file to be sent to bank for the payment. So F110 generates the same.
    You can create the payment via F-53, but to send the information to bank you need to develop a program to generate the payment file. Otherwise you will need to enter that payment manually in the bank site.
    But I still believe that F110 is the best way to make bank transfer payments.
    Regards,
    SDNer

  • Signal Generation through pt by pt Signal

    Hello,
    I am acquiring signal through serial port, to analyze the signal, i am using pt bt pt signal analysis.
    In order to work on it, i used sine wave pt pt signal generation. But remained un successful in generating sine wave through it.
    Kindly guide me how could i generate sine wave using pt by pt.
    Thanks

    Hi Intelligent,
    it's not a good idea to start asking by using PNs, I will ignore them in the future!
    You wrote:
    I already read the help and tried to solve the issue but after not receiving the satisfied results, i posted on the group. As its written in the help that the frequency is in Hz, but the value you have selected for the frequency is 0.01. So its un understandable, also the dependentence of time factor.
    - What are "unsatisfying results"?
    - Yes, the frequency is given in Hz and I chose 0.01Hz for sake of showing an example...
    - "Dependence of time factor" is explained in the context help. Did you really read the help? Or do you have problems to understand the simple math formula provided in the help? All the parameters of SineWavePtByPt are used in that formula...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • It is Possible to register apple developer account through wire transfer from India?

    Hi,
               Due to lot of issues with my credit cards, I am not able to register apple developer account through the credit card. So is it possible to register developer account by wire transfer or anyother methods ? My friend told to me that from India credit card is the only possible way to register. Is he correct ?

    You'll need to ask Apple that, we're just users here like yourself.
    Try
    https://developer.apple.com/contact/submit.php

  • GTS 8 and BOM transfer

    Has anybody implemented the new feature to apply license determination for BOM components in GTS 8.0? If so, i  would like to know if you are able to read/transfer sales order BOMs instead of material BOMs
    Shiva R

    Hi Shiva,
    maybe this helps 
    http://help.sap.com/saphelp_gts72/helpdata/en/ed/4c57428a070e53e10000000a155106/frameset.htm
    Kind regards
    Jan

Maybe you are looking for