Pr link Ae not rendering correctly

Hi,
I'm relatively new to this type of workflow and will try to communicate the problem the best I can. My main goal is to trouble shoot where the glitch is.
The Problem:
I am editing 4K and 5K footage in Pr on a 1080p timeline and sending some clips to Ae for effects. Not sure if I'm pushing the limits on how these two programs communicate, but I'm getting strange problems in the renders. They are glitchy and not representative of how I effected the clip in Ae. The layer will hop around and loose resolution for a couple frames. Very random. Just to be clear "the renders" are from when I select the clip on the Pr timeline and "render selection". Not rendered straight out of Ae to a separate folder.
Type of effects.
On my timeline I "set to frame size" for some clips, "scale to frame size" for others. I often "reverse clip" in either Pr or Ae.
In Ae I use the TimeBlend effect with keyframed accumaltion. I ramp speeds on keyframes as well. Lots of stuff going on and it seems some of it is lost in translation between the two softwares.

Thanks for that. Another thing I didn't mention is that I changed the duration of the Ae comp settings after sending it to Ae to accommodate a speed ramp. That might have confused it a bit. I may go with a render and replace method though. My source media is a mix between RED 4K files, and image sequences baked into 5K ProRes QT files. So much potential, but unruly to work with. Hard to edit this piece when I spend most of my time waiting for renders just to get a preview. I thought of using proxies which is a new work flow for me.
Does sending a sequence from Pr to Ae then creating a proxy workflow in Ae present any problems? Just trying to find the best way to edit as close to the speed of thought that I can. I'd love to be able to add a Time blend effect, preview it in the edit, tweak it, preview it again... so on and so forth.
Thanks.

Similar Messages

  • Linked psd not rendering correctly. Text and colour shows up wrong. What's happening?

    I'm trying to use linked psd's but when I go to link one, the text shows up all wrong.
    I'm not resizing the linked psd at all, and i'm saving it exactly as I would save my main psd.
    Does anyone know how I can fix this?
    Here's a comparison.
    The text from the linked psd is on the left, and the text from the psd that's containing the linked psd is on the right.

    I'm not sure what you mean by "linking"?  Have you tried Layer > Matting > Defringe?  What happens when you flatten the file?

  • 'Sorry, Too Many Cards' message NOT rendering correctly

    I'm seeing the 'Sorry, Too Many Cards' message not render properly for me on Palm Pre 1.3.1. I rebooted the phone and was able to reproduce the problem by opening up many cards. I have uploded a screenshot: http://img188.imageshack.us/img188/6525/browser20091511171212.png
    As you can see, the 'OK' button is not rendered correctly. If I remember correctly it supposed to be a green button? Also, the right side box is supposed to have an icon or something. I've never seen this error message NOT rendered properly before 1.3.1.
    BTW, like others have posted - once I get to a memory threshold I can't even open up core apps - like 'Device Info' (in case I needed to reboot the phone). I would have expected some high availability on these apps w/r/t memory management.
    I would upload more debugging information if I knew how on the Pre. But like I said I was able to reproduce on 1.3.1 before and after a reboot.
    Thanks,
    Post relates to: Pre p100eww (Sprint)

    lblumen wrote:
    Am getting same message.  Since new update was downloaded.  Also, I am getting the too many cards open message daily, even when no other cards are open
    I'm having the same problem. Usually I will have Tweed open along with the Camera app. I try to send a photo by email and I get the "too many cards open message". Sometimes when I turn the screen off and turn it back on it fixes it. But today I only had the Photo app open and was trying to send a photo by email and i got the "too many cards open message". The same happens when I only have one program like the emailapp then click on a link. Right now I have NO apps open. I'm trying to open the camera app and it keeps giving me the warning. It's very annoying, especailly when you are trying to do some quick. Oh don't get me started on the the slowness of the system ...

  • Why is my .psd file not rendering correctly in ae

    Some layers of the .psd document are not rendered correctly. However they are imported.
    The strange thing is that when I first move from Photoshop to Illustrator, save it as an .ai file it is rendered properly (in Ae).
    I am kind of clueless as to what is causing this issue.
    Kind regards,
    Jelle

    Okay if more information is needed, i'll provide. However you may disregard my initial comment about illustrator. It flattens the photoshop layers so I do not have any flexibility in After Effects. In other words, my main question remains: why is my psd file not rendering correctly in ae?
    Further details:
    -photoshop cc and after effects cc.
    -macbook pro retina
    If still not clear enough, please tell me what details you are looking for furthermore

  • [SOLVED] KDE4.3 is not rendering correctly the images in the desktop

    I've posted a bug in KDE because the KDE images are not rendered correctly:
    https://bugs.kde.org/show_bug.cgi?id=202829
    You can see an image of my desktop at:
    https://bugs.kde.org/attachment.cgi?id=35921
    As someone suggests, and I also agree with him, it would be a driver problem. My graphic card is "ATI Radeon X1950 Pro" and I'm using the "xf86-video-ati 6.12.2-2" driver. I know that there are other possibilities according to this wiki:
    http://wiki.archlinux.org/index.php/ATI
    I already tested them with KDE4.2 and xf86-video-ati provided the best result for me.
    Someone with an ATI card has the same problem? Which driver would you suggest to me?
    Thank you
    Last edited by jjjaime (2009-08-06 19:04:12)

    Thank flamelab for your help.
    The xf86-video-ati-git:
    http://aur.archlinux.org/packages.php?ID=15374
    fixed all my problems. Probably you've heard about it Now, I don't have any rendering problem and I have enabled the Desktop effects. I tested it with and without the xorg.conf file. Both of them worked, but without the file I don't have my keyboard in Spanish.
    I read that it was possible the KMS support. I tested it by changing from graphical to text mode but it takes some time so I guess that it's not enabled. Is there any way to test KMS?
    Is it possible to upgrade the AUR driver to the official repository? Meanwhile, I will comment my problem in the KDE site.
    Best regards,
    Jaime

  • PDF not rendering correctly

    Hi
    Can anyone help? I am using an iMac and have had a pdf emailed to me. When I login on to the site and select the PDF to view, it is not rendering correctly.
    I am not a technical person but to me it appears to open as a series of code, letters, numbers and symbols.
    Any ideas how to rectify this?
    Is it Adobe related or can I update the settings for the browser? I am using Safari.
    Thanks

    what OS & Safari version ?
    Often, removing any 'pdf' plugins in
    /Library/Internet Plug-Ins/
    and
    ~/Library/Internet Plug-Ins/
    then restarting the browser will solve pdf display issues, although in this case, it sounds as if the site is telling Safari that these are text type files & it's attempting to display them accordingly.
    Disabling plug-ins via Safari - Preferences - Security should also eliminate pdf plug-ins as a cause.

  • Basic Layout not rendering correctly.

    ''locking as a duplicate of https://support.mozilla.org/en-US/questions/1035123''
    Hello,
    I've been trying to debug a problem I was noticing on my production websites, so I dumbed it down to a quick codepen to show off the issue. http://codepen.io/anon/pen/GgoBNJ
    Basically, standard fonts (helvetica, arial, etc.) are not rendering correctly within a div. For some reason the text is pushing itself up ~2 pixels. Not to mention, fonts are looking very jagged within the browser for no apparent reason.
    I am setting up a basic div with hardly any styles and yet this produces two different renderings within FF and Chrome
    .box{
    font-family: Helvetica, Arial, Sans-serif;
    font-size: 14px;
    border: 2px solid #FF5500;
    display: inline-block;
    width: 100px;
    This is causing me all sorts of headaches with designers who are trying to make layouts pixel perfect as I have zero control over something like this. Any help would be greatly appreciated!
    Thanks in advance.

    You may have zoomed the page(s) by accident.
    Reset the page zoom on pages that cause problems.
    *<b>View > Zoom > Reset</b> (Ctrl/Command+0 (zero))
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    You can right-click on a web page and select "Inspect Element" to open the Inspector (Firefox/Tools > Web Developer).
    You can check the font used for selected text in the Font tab in the right pane of the Inspector.
    *https://developer.mozilla.org/Tools/Page_Inspector
    You can do a font test to see if you can identify corrupted font(s).
    *http://browserspy.dk/fonts-flash.php?detail=1
    You can try different default fonts and temporarily disable website fonts to test the selected default font.
    *Tools > Options > Content : Fonts & Colors > Advanced
    *[ ] "Allow pages to choose their own fonts, instead of my selections above"

  • Rollover text not rendering correctly in Safari 7.x

    Safari 7.x and my blog (NotNecessarilyPretty.com) are not getting along.
    Specifically, the rollover text in the post titles (see attached or visit site) is not rendering correctly. The right edge of the text does not change to the correct color. Have been in contact with Apple as well as the theme's developer, but have yet to be offered of a fix. 
    This blog displays correctly when accessed via Chrome or Firefox, and prior to Mavericks, Safari evidenced no problem.
    Thoughts on how to correct this?
    Thanks!

    The original screenshot didn't show here, so for anyone else reading, who may well know much more about CSS & Safari than I :
    changes to this - note the right edge
    But with word-spacing un-checked in Inspector...

  • RequestCenter emails not rendering correctly in Outlook 2007

    RequestCenter emails not rendering correctly in Outlook 2007
    I'm having an problem where the RequestCenter automated emails are losing most of their HTML formatting when viewed in Outlook 2007.  When I look at the same email in Outlook 2003, the HTML formatting is fine.  Here's a picture of the same email displayed in Outlook 2003 and 2007:
    When I view the source HTML of the email, I noticed that there are duplicate HTML, HEAD, and BODY tags that have been automatically added by RequestCenter.  Apparently these extra tags are ignored by Outlook 2003, but cause problems with Outlook 2007.
    This picture shows the HTML source in RequestCenter's HTML editor compared to the HTML source from within Outlook with the extra tags.
    I tried removing the HTML, HEAD, and BODY tags in the HTML editor, but the editor puts the tags back in when you save it.
    Does anyone know how to fix this?
    Thanks,
    Scott

    We've actually had the same problem and had opened a ticket with customer care - it's the editor that's in the version we have (or had, since we are going through the upgrade).  What we've had to do is embed xml tags in the body of the email too, and then the team that processes the email has a little application that will process the data in the tags and strip the HTML that the editor applies.  Not much help, I know. 
    I've heard a rumor that the issue is fixed in 2007 with the new text editor - I'

  • Adf application not rendered correctly with url ip and url localhost.

    Hi all.
    I have a strange problem. When I enter to my adf application deployed in a local stand alone weblogic server with the ip:
    http://localhost:7001/Application/faces/index
    it renders fine. But when I load it with the url:
    http://10.5.14.15:7001/Application/faces/index (private ip), it doesn´t render fine. Tables haven´t the same style, and some elements appear selected like if I have selected them with the mouse.
    This problem only happens with internet explorer, not with Chrome.
    Also when I see a table inside a region in a jspx, the with of the header of the columns is not rendered correctly, causing the width of the header row not be the same than the other rows.
    This problem also happens only with internet explorer.
    Any help please?
    Internet Explorer 8. JDeveloper 11g.2. Weblogic 10.3.5.0
    Also happens with Internet Explorer.
    Maybe encoding? doctype?
    Thanks

    What would the DOCTYPE have to do with the IP address?
    Have you looked at the HTML source in the different browsers and tried to debug what's wrong? Sounds like there may be some images/css files that aren't being downloaded in IE when you use that IP address. Are you sure IE isn't configured with a proxy?
    John

  • KM, HTML file, Not rendering correctly

    Hi Everyone
    I have an html file that is stored in knowledge management.  The html file references few folders/images that are also stored in KM. When I create a KM Document iView, the HTML file shows; however, the various images/style sheet that is stored along with the html file KM do not appear.  Thus the html file is not rendering properly. 
    With this being said, I can create an URL iview and everything works as it should (the html file appears correctly with the necessary images).  The problem is that I am developing a solution for an external and internal facing portal, thus the URL iView option is not going to work for me.  I need to have a way for this KM html iView to display properly...perhaps with the KM Document iView template.
    Has anyone encountered an issue such as this and can offer assistance.  Again, the KM Document iView template will work, if the html file it is calling in KM can correctly reference other folders in KM that contain various images/style sheets that are a part of the html file.
    Any help is greatly appreciated.
    Best Regards,
    Scott

    Hi Scott.
    In order to solve your problem with relative links to image and css files inside KM I suggest two variants:
    1. Replace relative links as I mentioned in this message Re: JavaScript and CSS info in WPC.
    2.The second solution is:
    a. Create an blank html file inside KM folder where the base.html file is stored.
    b. Download the newly created file for local editing.
    c. Place an iframe that points to your base html file between <BODY></BODY> tags. Use a following code as an example:
    <iframe width="100%" height="100%" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" src="base.html"></iframe>
    d. Upload this file back to KM.
    e. Point your KM Document  iView to the created html file.
    Best regards,
    Aliaksandr Zhukau
    Edited by: Aliaksandr Zhukau on Dec 3, 2009 11:04 AM

  • JSF Pages are not rendering correctly when  loaded using Non JSF actions

    Hi All,
    This problem is irritating me and I am posting the same query for the third time here.
    When I come from non jsf actions such as page submitting using Javascript, clicking anchor link, clicking normal Html submit button and so on my page is not rendering correctlly .
    In other words, My first GET method/Post method works perfectly for the first time when the page is loaded.
    But when we try to access the page for the second time, although logical work is perfect in bean, I am getting same old page.
    How to resolve this issue?
    or
    Is this Bug of Sun's Implementation of JSF Framework.
    Thanks,
    Sudhakar

    Hi Sudhakar,
    There is a discussion about refreshing a page, Take a look at the below thread
    http://swforum.sun.com/jive/thread.jspa?threadID=55660
    Hope this what you are looking for
    MJ

  • Non-English fonts not rendering correctly in iMovie 10.0.3?

    I use xenotype Tibetan font in iMovie and it has always rendered correctly until I updated from 10.0.2 to 10.0.3. Now many of the stacked characters do not render correctly in any of the titles. Even projects that I made three months ago with 10.0.2 when opened in the new version render the font incorrectly. Is there a reason for this change? Is there any adjustment I can do? Line-height adjustment? iMovie 10.0.3 seems to be the only Mac software currently made by apple that doesn't render the font correctly.

    Hello,
    Welcome to the discussions. There have been some transition problems reported, although maybe not so many problems as you are experiencing.
    I had the black/flash with the transition cross-dissolve in one of my movies recently. I found the suggestions in this thread to resolve that: http://discussions.apple.com/message.jspa?messageID=3842119#3842119
    Have a look and see if it can help you.

  • JSP page not rendering correctly for remote system

    I have a jsp page that has an HtmlGraphicImage component that gets set by a method in a java bean using
    image2.setUrl( imageFilename );
    When I run the application on my local system (my development system running Studio Creator) the page comes up on my web browser with the proper image.
    However, when I try to access the page from a remote PC, the page comes up okay with all the static components, but the image is blank. When I look at the page source on that browser, the image url is set to blank (i.e. nothing inside quotes).
    Any ideas why this image is rendered correctly on my local system and not remotely?

    <title>Home</home>Find the mistake!

  • Links do not display correctly in my pdf

    www and http are not displaying in pdf files converted from MS Word
    When I convert a Word document to pdf using Acrobat Pro 9.0, the website addresses do not display correctly. For instance, if my document shows www.website.com - then the pdf only displays .website.com. Also, if I have the http://www.website.com - I get ://www.website.com. Please HELP! I remember having this problem when I used the trial version of Acrobat 9.0, at the time, I just removed the link & the document converted fine. For this file, I REALLY need the links to be active.
    For now, I have resorted to using a pdfmaker that costs about $5 on e-bay. It works just fine - why doesn't my Adobe Acrobat work?

    PDF maker is the part of AA9 Pro that converts the links for you. You did not say how you are creating the PDFs, but you have to use PDF Maker (the create PDF button in WORD) to get the links correct, or add them manually in Acrobat.
    I have no idea what PDF Maker you are talking about for $5 a day, since it is part of your package and is thus no additional cost. If you are printing to the Adobe PDF printer, you are not using PDF Maker.

Maybe you are looking for