Pr message while deleting PR
If we hve created PO for particulat PR... AND we are deleting that PR the message is reflecting the po has been created for this material....... we want to make this error message..how we can do it?
Thanks in Advance
Santosh
Hi
Please mainatin the Message 00 -06 -162 as error in SPRO-> Materials Management-> Purchasing-> Environment Data-> Define Attributes of System Messages.
Now if you try to delete the line item in the PR, this will not appear as error , it will be shown as a warning message,
But you will not be able to set the deletion flag on the PR line item.
Thanks & Regards
Kishore
Similar Messages
-
Error Message while Deleting Pages in Adobe Professional 8
I have a massive file that I am trying to delete pages from, but when I get to one specific page, I get an error message that says "An incorrect structure was found in the PDF file." It will not allow me to delete the page. I have, by the way, deleted other pages from that file without incident.
What the heck does that message mean? More importantly, how do I fix it?Structure = tags: information about the text flow in the document.
Go to the Tags palette and delete all. Then you should be able to
delete the page.
Aandi Inston -
Error message while deleting files from the tracker
I deleted four files from Acrobat.com before removing them from the desktop tracker and now I don't seem to be able to remove them or stop collecting data on the files in the tracker. Am I missing something or is there not a way to get rid of them?
Rufus ChaneyPlease try again after taking each of the following steps that you haven't already taken.
Step 1
Reset your computer’s PRAM.
Step 2
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications of the machine.
Step 3
Back up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with Disk Utility. Preferably both.
Erase and install OS X. This operation will destroy all data on the startup volume, so you had be better be sure of the backups.
Step 4
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider to have the machine tested. -
ITAB_DUPLICATE_KEY error while deleting ODS data
Hello again
i am getting ITAB_DUPLICATE_ERROR message while deleting data from ODS.
kindly let me know how to proceed.
as ours is full load it is very important to delete the previous data.
Rgds,
Ala.I also am getting the same error under the same circumstances. I understand that RS_FIND_ISOSMAP_DUPREC will give a list of duplicate records in RSISOSMAP. How then are the duplicate records deleted?
Any ideas on what caused the duplicate records to be created? I did have some trouble connecting the source system to BW. -
How to create a error message for Deleted batch while creating a PO
Hi ,
Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
when a PO is created for a deleted batch at GI &GR lebel it is showing a error message,
but i want to show a error message while doing the PO creation.
Thanks,
Sachhiin badi me_process_po_cust u can put this message
METHOD if_ex_me_process_po_cust~check. -
Error while deleting master data (Message no. RSDMD118)
Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this. -
WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR " Screen: Illegal message"
Hi Experts,
While deleting a sales order giving run time error. PFB runtime error details.
If you know any OSS message, please let m know. I tried, but there is no luck.
Short text
Screen: Illegal message
What happened?
The current screen processing action was terminated since a situation
occurred where the application could not continue.
This is probably due to an error in the ABAP program or in the current
screen.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator.
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
The program attempted to issue a " " message during "Exit Command" processing.
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
How to correct the error
The program must be modified to correct the error.
The modification must be made in "Exit Command" processing.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
Source Code Extract
Line SourceCde
1 *---------------------------------------------------------------------*
2 * FORM YVBEP_LESEN *
3 *---------------------------------------------------------------------*
4 * Lesen der Tabelle YVBEP (nicht sortiert) *
5 *---------------------------------------------------------------------*
6 FORM YVBEP_LESEN USING US_POSNR
7 US_ETENR
8 CHANGING CH_TABIX.
9
10 YVBEP = SPACE.
11 YVBEP-MANDT = VBAK-MANDT.
12 YVBEP-VBELN = VBAK-VBELN.
13 YVBEP-POSNR = US_POSNR.
14 YVBEP-ETENR = US_ETENR.
15 READ TABLE YVBEP.
16 IF SY-SUBRC > 0.
17 MESSAGE E506 WITH US_POSNR US_ETENR.
18 ENDIF.
>>>>> CH_TABIX = SY-TABIX.
20
21 ENDFORM.
Could you please help on this issue.
Thanks
SrinuHi Srinu,
it looks like you got the error message Schedule line &1 &2 is missing in table YVBEP while deleting the sales order.
It seems, that there are no SAP notes regarding this issue. Do you have this issue with all orders or with a single order?
If only a single order causes this issue, maybe something was wrong during an update.
If you get this error for many orders, then custom code (modification, enhancement, user exit in MV45AFZZ, ...) may be the reason for it.
If you have no custom code in module pool SAPMV45A, then contact SAP for this issue.
Regards,
Klaus -
Deletion marked material should give error message while creating proc ord
Hello,
i had marked the material for deletion through T-code MM06 & saved.
Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.Yes Brahman is Right,
Check the followig..
Go to OMCQ and change the message category to E- Error message instead of W- Waring message in Message no M7 127, but
not M7 121.
and check it,
Regards,
Pavan idlur. -
Error message 'Message no. ME867' while deleting a PO line item
Hi,
This is a PO item without material master and account assigned to cost center.GR (101) was done and the GR is cancelled(102)for the total quantity.
While deleting the PO line item, i am getting error message with out any description.When i check the details of the error it is showing as 'Message ME867'. Since this error is not showing any error description, i am unable to know the cause of the error.
Please let me know what might be the cause and how can we rectify this.
Thanks in advance
Regards,
RambhupalHi,
This means ERS is active in your system.
What this means is that when you do a GRN, an ERS flag is activated in the PO header. The ERS is then settled using the PO data in SRM.
If you have not settled this (at least this is what is indicated from the message), then uncheck this flag in the PO header and then try and archive.
Cheers. -
Error Message AM057 while deleting contact person
Hi,
Recently, our company consolidated the SAP platforms for two regions and it is single instance now. The data is migrated to the new system by SLO. After this we are facing an issue while deleting the contact person in customer master. When we select the contact person and delete, we get a message saying "Specify a valid person use (PERSON_REFERENCE)". When we press enter, another entry (above the intended entry) gets deleted.
The performance assistant shows nothing but message no. AM057.
Based on the couple of OSS notes I have searched, I checked the table ADRVP entries and found two entries for that contact person. Both entries have the client number appearing in the field APPL_KEY.
The first record is having old client number and the second record is having the new client number. I presume, we are seeing two records because the data was migrated by SLO. But what is confusing is, both are having same addr.no. and marked as X for Owner (Flag: Adress owner object reference).
Data in table ADRVP looks as under.
Cl. Person Seq. No. Table Field Application table key pers.addr. Key Addr. no. Owner
300 0200591046 1 KNVK PRSNR 2000000093060 BP 0200026699 X
300 0200591046 45333695 KNVK PRSNR 3000007093060 BP 0200026699 X
Can there be more than one entry with same addr. no. in table ADRVP for the same person number? Can someone share what is wrong with deleting the contact person in customer master?
Thanks,
BalajiDear Balaji
You have asked same question In Different places
Re: Error Message AM057 while deleting contact person in customer master -
Error Message AM057 while deleting contact person in customer master
Hi,
Recently, our company consolidated the SAP platforms for two regions and it is single instance now. The data is migrated to the new system by SLO. After this we are facing an issue while deleting the contact person in customer master. When we select the contact person and delete, we get a message saying "Specify a valid person use (PERSON_REFERENCE)". When we press enter, another entry (above the intended entry) gets deleted.
The performance assistant shows nothing but message no. AM057.
Based on the couple of OSS notes I have searched, I checked the table ADRVP entries and found two entries for that contact person. Both entries have the client number appearing in the field APPL_KEY.
The first record is having old client number and the second record is having the new client number. I presume, we are seeing two records because the data was migrated by SLO. But what is confusing is, both are having same addr.no. and marked as X for Owner (Flag: Adress owner object reference).
Data in table ADRVP looks as under.
Cl. Person Seq. No. Table Field Application table key pers.addr. Key Addr. no. Owner
300 0200591046 1 KNVK PRSNR 2000000093060 BP 0200026699 X
300 0200591046 45333695 KNVK PRSNR 3000007093060 BP 0200026699 X
Can there be more than one entry with same addr. no. in table ADRVP for the same person number? Can someone share what is wrong with deleting the contact person in customer master?
Thanks,
BalajiBalaji Srinivasan wrote:
Based on the couple of OSS notes I have searched,
You should share the OSS note which you got from market place.
Have you checked this note Note 445825 - Error message AM057 when deleting a contact person ?
It has the reason and solution. -
i received the following message while i was on my macbook air "you do not have enough space in your start up disk - you must delete some files"-restarted; only got startup noise then blank screen. i waited for a few minutes to see if it would load - nothing just the lit up screen but nothing loaded - held power button it asked did i really want to turn off - i selected shutdown -turned off and left it off for awhile tried to turn on no noise no screen load. the same lit up screen but nothing loading. please help thx in advance if anyone can offer some suggestions
You can get there from here (booting normally); it just may take you a few steps to do it.
If the disk is almost full and the system won't boot then sometimes it will boot in Safe Mode.
http://support.apple.com/kb/HT1564?viewlocale=en_US
Empty the trash after it boots.
Then for hints on how to free disk/SSD storage see https://discussions.apple.com/thread/5872318?tstart=0
If the Safe Mode boot does not do the trick then you can install OS X on an external hard disk, boot from that, and then delete files. You can also reach the disk via Target Mode. A third option is to take it to an Apple store where they can do a network boot and help you remove some files. -
Message: illegal cluster id while deleting WF steps
Hi all,
While deleting steps in workflow template, sometimes I get this error message
illegal cluster id #### (some number)
It doesn't stop me from deleting or creating new steps, but I was just curious why we get this message and how could it be avoided.
Thanks
kiranKiran,
We had this problem intermittently in the initial days of our upgrade from 4.6C to 6.20. Since it did not cause any harm and we were under tight time constraints, did not really pursue it. It eventually stopped. I would think it was fixed by a support pack or a GUI patch. you may be able to find something in OSS.
Cheers,
Ramki Maley -
I'd like to know how to delete individual messages without deleting the whole conversation with the new update, it no longer gives you the edit button?
freckles4fun wrote:
No longer true.
This thread is over a year old. -
Error while deleting a mapping
Hi all,
I am getting the following error while deleting a mapping. My client version is 10.2.0.4.36
API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
oracle.wh.util.Assert: API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
at oracle.wh.util.Assert.owbAssert(Assert.java:51)
at oracle.wh.ui.jcommon.OutputConfigure.showMsg(OutputConfigure.java:216)
at oracle.wh.ui.common.CommonUtils.error(CommonUtils.java:370)
at oracle.wh.ui.common.WhDeletion.doActualDel(WhDeletion.java:512)
at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:203)
at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:283)
at oracle.wh.ui.jcommon.tree.WhTree.deleteItem(WhTree.java:346)
at oracle.wh.ui.console.commands.DeleteCmd.performAction(DeleteCmd.java:50)
at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Thanks in advance!
SebastianThese type of Internal Errors are all too common in OWB and it's difficult to diagnose the exact problem.
I'd suggest closing the Design Centre, going back in and trying to delete it again, this will often resolve Internal errors.
There's also an article on Metalink Doc ID: 460411.1 about errors when deleting mappings but it's specific to an ACLContainer error, so may or may not be of use.
One of the suggestions is to connect as the Repository Owner rather than a User and try to delete the mapping.
Cheers
Si
Edited by: ScoobySi on Sep 10, 2009 11:44 AM
Maybe you are looking for
-
VF11 wrongly created with RV Doc type and with not clear status.
Hi All Issue: There are 2 billing documents which were created(VF01) in March are canceled (VF11) in May. Cancel document is saved with a message (No automatic clearing of billing document XXXXXXXXX) and message diagnosis saying that u201CThe Automat
-
How to get the NO of MESSAGEs in a particular queue
Hi, I would like to get the TOTAL no of messages in a queue. Any idea please mail me at [email protected]
-
Issues with Display of Flyouts with doctype set to HTML5 on the Internet Explorer 8 and 9
Hi All, I have created the html Page with the doctype 5 ,The Flyouts are being displayed properly in Mozilla and Chrome but in IE 8 and 9 they are not getting displayed. Please let what is the work around for making flyouts to work using HTML5 on IE.
-
When I try to exit a video on the internet I received a screen asking if I was sure I want to leave. It to not have a confirmation tag. But it has prevented Safari from shutting down. Now I can not turn off my Mac? How do I reset?
-
HP Pavilion dv7 - can't get access to recovery manager
I'm trying to restore my computer back to factory settings or just format it and start over..... I go through f11 to recovery manager, but the only option I'm allowed to choose is to recover using disks. I don't have the disks to do this. How can