PR not generating after running MRP

Hi Gurus,
System generate PR after MRP run where in material MRP Type is maintained as PD, but system doesn't create PR for those material which have MRP Type = VM. If I change the MRP Type to PD & then run the MRP, even then system doesn't create PR for that msterials.
My system most of the materials got MRP Type VM, suggest me the solution for this issue.
Regards,
Shantanu

1.MRP Type -VM , Lot Size -EX
2.Procurement Type -E for FG and F for ROH
3.Planning Startegy -10 or 40 in FG/SFG and 20 for componenet
4.Planned Delivery Time in MRP2 VIEW
Configuration : InSPRO -MRP -Check MRP Type -VM-check the details like Re-Orde point .Safety Stock both the automatic calcvualtion box are marked .
Finally as a sample test , select any material -mm02-execute forecast in mm02-forecasting view -exectute forecast -then save .Run MRP in MD03-1,1,3,3,1.NETCH indicator and check the result in MD04.

Similar Messages

Viewing requirements generated after running MRP (MD50)

Hi All,
I would like to know if there is any way to check for all the requirements that have been raised subsequent to running MRP using MD50. We have an MTO scenario and want to cross-check if the requirements for raw materials are being accurately generated.
This cross-checking requirement has risen due to the fact that there are many alternative BOMs for each material and there have been instances where due to errors in the material master, some raw materials are suspected to be missing out from the list of requirements generated.
Thanks!
Praveer

Praveer,
Check MDKP table for list of materials for which last MRP run date.
Run MRP in MD01 for if in case MTO Raw materials has MTS relevancy this way you can include all materials for MRP.
BR
KK

Create MTO production order immedately after running MRP

HI experts,
Does a stragtey group can be used for a material to create MTO production order/purchase order after running MRP?
Or how we can set a material to create MTO production/purhcase order immedately after running MRP?
Now we are using stragety group 50 for make to order material.
After running MRP, material will create a Make-to-order plan orders. Then we converted them into purchase order or production order based on propurment type.
Thank you for your response~
Boris

Dear
Please assing Planning Stargety -82 if you want production order just after logging sales order .Here MRP will be executed in background and it will generate Production Order fro MTO item and for depedent it will generate PR/PO .Make sure that , you have kep Individaul and Collective Indicator as 1 in MRP4 view of all the compoenets which have used in BOM .
Regards
JH

Inspection lot not generated after goods reciept?

Dear SAPIENTS,
Inspection type 01,0101,08,89 and all activated in material master but then allso inspection lot not generated after goods reciept. Can anybody suggest here that what could be the reason.
Regards,
Kaushal Rai

Hi Kaushal,
For Inspection lot from GR, 01 Inspection type is enough.
- Ensure 01 Insp type is active and Post to Inspection stock indicator is active for that inspection type.
- Ensure the QM is active for 101 Movement type, SPRO>Quality Management>Quality Inspection>Inspection Lot Creation>Inspection for Goods Movements>Deactivate Quality Inspection for a Movement Type
Regards,
Keerthi.

The graph dose not shown after running the Customize JSP Page.

Hi All,
While creating customize JSP I am facing one problem - The graph dose not shown after running the Customize JSP Page.
What are the possibilities ? any body has any Idea Please help me

Hi all,
I have the same issue! Any solution??
Thanks
BI Beans Diagnostics(v1.0.2.0) 11/10/06
=========================================================
JDEV_ORACLE_HOME .......................... = D:\jdev1012b1913
JAVA_HOME ................................. = D:\ORDB10gR2Home\jdk
JDeveloper version ........................ = 10.1.2.1.0.1913
BI Beans release description .............. = BI Beans 10.1.2 Production Release
BI Beans component number ................. = 10.1.2.67.0
BI Beans internal version ................. = 3.2.2.0.24.2
Connect to database ....................... = Successful
JDBC driver version ....................... = 10.1.0.4.2
JDBC JAR file location .................... = D:\jdev1012b1913\jdbc\lib
Database version .......................... = 10.2.0.2.0
OLAP Catalog version ...................... = 10.2.0.2.0
OLAP AW Engine version .................... = 10.2.0.2.0
OLAP API Server version ................... = 10.2.0.2.0
BI Beans Catalog version .................. = 3.2.2.0.24
OLAP API JAR file version ................. = "10.1.0.5.0"
OLAP API JAR file location ................ = D:\jdev1012b1913\jdev\lib\ext
Load OLAP API metadata .................... = Successful
Number of metadata folders ................ = 1
Number of metadata measures ............... = 23
Number of metadata dimensions ............. = 8

Schedule lines not generated after MRP run

Dear All,
I am trying to create Schedule lines through MRP run , but instead system creates MRP element PRqRel and its PurRqs when i check in MD04 , the following are the prerequisite i done before MRP run , but still Schedule lines are not generating.
1.activated checkbox source list in material master.,Procurement type is F, MRP type PD , lot size MB , marked JIT Scheduling indicator as 1 in Pur view of material master , no MRP group is used in our process.
2.Maintained Inforecord.
3.Maintained source list for the material and marked MRP relevant as 2. Validity also checked.
4. Quota arrangement for this vendor only.
5. Created New scheduling agreement.
6. Material is not sent for subcontracting.
7. Ran MD02 with following parameters ,
Processing key NETCH Net Change in Total Horizon
Create purchase req. 1 Purchase requisitions in opening period
Delivery schedules 3 Schedule lines
Create MRP list 1 MRP list
Planning mode 3 Adapt planning data (normal mode)
Please let me know if i am missing something
Thanks in Advance
Benny

Hi,
Please check the below links...
Schedule Lines not getting created in MRP
Schedule Lines not generated for MRP Type PD
Kuber

RE : IDOCS did not Generate after payment run

I have a unique issue. After APP run (ACH) all accounting entries & payment document created corectly. However idoc's for 3 vendors did not generated. There is no issue with configuration as this is not a new vendor and every month payments made off automatically. Vendor complained non receipt of payment after 10 days and I could not find the log for that day. Could anyone please give some hints what could have gone wrong if anyone is expereinced this issue. As I said earlier all config and set up are correct and infact after that one payment is made to that vendor.
Thanks
Ivan

Hi,
Once APP run completed, Vendor open items will be cleared.
You have to create IDOC using WE19.
Run the Idoc using AL11
may be your problem will be solved
Thanks
Chandra

DME Output not Generated after Payment Run in F110

Hello,
I have a typical problem. I have been running the payment run for a Finland Company and I am not able to generate the DME data medium contents in the overview which generally appears for other company.
I have checked the Payment Method for the Country and the Format given there is FI_LUM2. And the Payment Method Workbench is selected instead of the classic payment programs. In the payment method for company code there are no forms available. I just wanted to ask whether it is mandatory to define a form at the company code level in case of a Payment Method Workbench being used in Country payment method?
About the customizing of PMW Payment Medium formats I went to the node Adjust Payment Medium Formats and then checked at standard settings for the relevant format FI_LUM2 and found that payment medium accompanying sheet was not ticked. Could this be the cause.
I don't really understand. Please help me out.
Thanks
Chetan Mahapatra.

Hi,
Run payment through F110 without putting variant name in front of RFFOEDI1.
After running F110, go to SE38 transaction and put all the detail and execute, system will tell you the reason of not generating IDOC.
Regards
K Khatri

/3M1 and /414 wage types not generated after maintaining IT0582 exemption

Greetings,
I am facing an issue while generating the Annual Medical Reimbursement Exemption wage type (/3M1) and Total Medical Exemption wage type (/414) for an employee. I have referred to previous threads pertaining to this issue and have accordingly performed the following steps in this regard so far:
1. I am using the wage type 9MDR to pay the medical reimbursement amount to an employee through IT0014. Following is the screenshot of V_T7INT9 for this wage type:
2. Following is the screenshot of V_T7INA9 for 9MDR wage type
3. Following is the screenshot of V_512W_D in Evaluation Class 6 section for 9MDR wage type. As per the earlier threads on this topic, I initially maintained the value 10 (Medical Allowance) for Evaluation Class 6 for this wage type. But even in that case, the /3M1 and /414 wage types were not getting generated. As a result, I am maintaining the value 20 for Evaluation Class 6 for this wage type
4. Following is the screenshot of IT582 in which I am maintaining a record in Subtype MDA for this employee:
5. Similarly, following is the screenshot for IT0014 where I am maintaining the amount of Rs.1250 against 9MDR wage type for this employee:
6. Subsequently, I am running the Payroll for this employee for April 2014. Following is the screenshot of EXM table which is the input for INMED function:
7. Following is the output after the execution of INMED function. As we can see, /3M1 and /414 wage types are not generated:
I would request the forum members to share their insights into possible reasons for this discrepancy.
Thanks

Hi
I again checked the table V_T7INT9 table and found that the tax code SMED was assigned to another wage type 9MDA (Medical Allowance) which is used to pay Medical Allowance to employees through IT0008. Following is the screenshot of the same:
I removed this entry and then executed the Payroll. Subsequently I found that the /3M1 and /414 wage types were getting generated. Following is the screenshot of the output after the processing of INMED function:
Thanks for the responses.

No Scheduling line is generated when RUN MRP

Hi Gurus,
My SA type is 'LP', source list is marked with 2 'relevant to scheduling line'.
then i RUN MRP with parameters 33132, but no scheduling line is generated, could you help me find the reason , thank you!
BR,
Dragsky

Dear Dragsky,
You need to create scheduling agreement in ME31L
Also check this link
[Schedule Lines not getting created in MRP;
Regards
Madhu

Workbook not refresh after running Planning Function (BI-IP)

Hi! Folks,
I have a problem with the Bex Analyser which not refresh the data after running Planning Function.
Step 1: Run Planning Function (There are some changes in records)
Step 2: I have to Run Process Variables again and input the same selection in the pop-up variables
Step 3: The changed records will be shown...
Can I have some coding in the Layouts of Bex Analyzer to refresh the data after running Planning Function?
Brgds,
Supasake

Hi,
I had a similar problem that the resuls of my planning function were not automatically shown. Only if I did "something else" like saving or running another function the results were displayed.
I think I solved it by upgrading my SAP GUI6.4 with patch 14. the results of planning functions should be automatically displayed.
D

T400 with ATI Radeon HD 3400. Driver not found after running ImageX.exe /Capture

Hello,
I was able to reproduce the following problem on a T400.
- unattended installation of WXP-SP3 (slipstreamed)
- reboot
- install latest ATI driver from Lenovo/IBM site (8.503.2.2-080818a-069536C)
- reboot
At this point, the video driver is well configured.
- Reboot once or twice, video driver still good.
- Boot the T400 on WinPE 2.0
- Capture the C:\ to a network file share using ImageX.exe (from Microsoft's WAIK 1.1)
- Shutdown the T400, and reboot on C:\
- At this point, video driver is "lost". The Hardware Wizard says "new driver found", but stick with default VGA.
Then I get an ATI error telling the driver is missing or not well installed.
- When rebooting several times, suddenly the card is back in the device manager as a Radeon HD 3400.
(without re-installing the driver ...)
Anyone has an explanation ?
Please not I did not run "sysprep.exe" before capturing with ImageX.exe
stefan

Update on this problem.
After running "sysprep.exe -mini -quiet -reseal -shutdown", I ran the "ImageX.exe /capture".
After rebooting the T400, the ATI driver was fine.
Either is a coincidence (but I could repeat it 3 times...) or it is not advised to run "ImageX.exe /Capture" on a non-syspreped Windows XP.
I know that a non-syspreped Vista system has a limitation if captured with ImageX.exe. But I am not aware on any limitation with XP.
Stefan

Accounting Document not generated after Post goods issue in delivery order.

Dear Experts
Greeting of the daays,
Need your help on below issue.
After making the post goods issue ,the system is not making the accounting document.
The error given by the system is as follows:
Material document 12365 does not include an accounting document
Diagnosis
The system cannot find an accounting document for the material document 12365.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
__Solution what I tried to solve this issue ,but not successful.__
__Solution 1- maintain OMS2__
__Solution 2 - maintain OMJJ- movement type 601 - PRCTR is required entry.__
__Solution 3 - price maintain is material master.__
__Solution 4 - OBYC - BSX - 7920 - GLA/c and GBB- VAX and VAY - 7920 GLA/c.__
__Pls let me know if there is any confirgation is missing.__

Hi
Do this checks:
In tcode OBYC check if you have the proper entries.
Go to tcode OKB9 and do the settings for the G/L acc. that you have in OBYC.
To populate PRCTR you can use OKB9 and you can check if you have values in MARC-PRCTR.
I hope this helps you
Regards
Eduardo

USB Keyboard not working after running Monolingual

Okay, I'm not a Mac person and should have known that I was going to mess up my mother's iMac, but here it is -
In an attempt to improve the mac's performance I performed all of the actions described in the following article: 11 Ways to Optimize your Mac's Performance ( http://lowendmac.com/eubanks/07/0312.html ). Basically, I cleaned up files and 'other' system preferences. Things seemed to be fine and the computer did run much better. However, after running Monolingual and deleting what I understood to be 'unnecessary' PowerPC files the standard USB keyboard is no longer working.
I've tried to search for various remedies, but have come to a dead end. So I'm left with reinstalling the Snow Leopard OS (I think it is 10.6.8?) BUT I can't because it is asking to input the account password (which I know) to make the change and I can't figure how to do that when the keyboard not working.
Any help would be great!
*feeling like a bone head*

How are you trying to reinstall Snow Leopard? If you're booting from the Snow Leopard or iMac Install DVD that came with the system then that should eliminate any of the issues you may or may not have caused when you deleted did the clean up work on your mom's system.
I suggest trying the following:
0) Verify that the caps lock key is off. It can make inputting passwords difficult if you don't realize it is ON.
1) Reset the PRAM by restarting the system then quickly press the command-option-P-R keys before the gray screen appears. Wait until you hear the computer restarts two times as indicated by the startup chime. For more info refer to http://support.apple.com/kb/ht1379.
2) If the issue persists after the PRAM reset then boot from the Snow Leopard or iMac Install DVD, whichever you have. Once you see the menu asking you to choose a language try using the arrow keys on the keyboard to move the language choice selection. If the arrow keys are working at this point it indicates your keyboard is at least partially functional. Go ahead and select the language then proceed to step 3.
3) Once the next screen appears move the cursor up to the menu bar area and pull down the Utilities menu. Select the 'Terminal' application. Once the Terminal application launches try typing the various keys on the keyboard and check to see if the correct characters are displayed. Please let us know if you detect any errors. If there are no errors then you should be able to quit the Terminal application and proceed with reintstalling the OS.

AWR snapsohots not generating after restart of the instance

oracle : 10.2.0.3
OS : Linux 64-bit
Issue : AWR snapshots are being generated after restart of the instance.
I restarted the instance at 31.01.2010 8 AM CST.
SQL> select STARTUP_TIME from v$instance;
STARTUP_T
31-JAN-10
SQL> select max(begin_interval_time) from DBA_HIST_SNAPSHOT
2 /
MAX(BEGIN_INTERVAL_TIME)
31-JAN-10 08.00.04.996 AMto my surprise the AWR reports are not being generated from 8 AM till now 8PM.
What could be the reason ? Do I need to do any thing manual initiation ?
Edited by: [email protected] on Feb 1, 2010 8:41 AM

SELECT STARTUP_TIME FROM DBA_HIST_SNAPSHOT WHERE STARTUP_TIME > TRUNC(SYSDATE);
post results from SQL above

PR not generating after running MRP

Similar Messages

Maybe you are looking for