PR not in table generate with maintenance order
Hi gurus,
I have a problem about maintenance order service external generate to PR(Purchase Requisition)
on External Tab. service Number already insert but material Group, Recipient, Purch. Group is blank and saved. so PR Number auto generate. but, i was check PR is not in table, like below.
Generate PR is done but cannot be updated, because in table EBAN is empty.
where is PR number ?
thank u,
SaifudinHajar
Hi Sundar,
the order already released,
i means why PR is generated but in table EBAN, is empty?
thanks,
Hajar
Similar Messages
-
Price not copying from contract to maintenance order in IW31
Hi Gurus,
I am facing issue in one of the client where Price is not copying from contract to maintenance order in IW31. But while doing the same in another client it is working fine.
I did not find the settings for this change. Can any one please help me for which settings price is not copying to IW31 transaction?
Thanks in advance!
Best regards,
Karun Kumarhi
i think if you have assinged the contract the servies will not copied ,for this in the external tab select the serice selectionbutton ,here specify the agreement from their select the serives you required
regards
thyagarajan -
Archive PO associated with Maintenance Order
We have maintenance orders back to 2004 that have never been closed or had the delete flag set. We would like to get these cleaned up. Many of them have purchase orders attached to them.
I ran MEMASSPO to set the final invoice indicator on the purchase orders that were hanging out there but when I tried to then close the orders and set the deletion flag I couldn't. I would get an error that the PO still existed. With production orders I would run RM06EV47 to set the delete flag on the PO then I would be able to close the production order. This doesn't seem to be the case with maintenance orders.
When I run RM06EV47 on the purchase orders that are associated with maintenance orders I get the message "Archive Run only flags Production Order POs. See BADI."
I haven't been able to find anything regarding how to set the delete flag on these POs. Can someone tell me what the process is?
Thanks much,
AndreaThere is no relation between archiving PM Order & PO existence.
When you make TECO & Business Completion of those orders, corresponding PR will get deletion flag.
You can run SARA for Purchase Order as well as Maintenance Order archival which will set Deletion flag as well as archive those documents.
Archive Purchase Orders
Archiving Object for PO - MM_EKKO
Archiving Object for Maintenance Order - PM_ORDER -
PR type generated by maintenance orders
Hi Gurus,
Where do you defined the type of purchase requisition generated by maintenance order ? Is it possible to have different types of PR depending on the material type of the component in the maintenance order ?
Cheers
OlivierHi,
You can define the PR type at following IMG point:
- Plant Maintenance and Customer Service
- Maintenance and Service Processing
- Maintenance and Service Orders
- General Data
- Define Account Assignment Cat. and Document Type for Purchase Requisitions
The value is usually set to NB but this can be different. Only one value can be defined for PM orders.
To get varying document types consider exits COZF0001/COZF0002 and adjust the field BSART.
-Paul -
Multiple doc type setting for service PR generated from Maintenance order
Hi Gurus,
My client has multiple company code and has different document type for PR and PO as per the company code. For generating the service PR from maintenance order system take the document type of PR defined in the config.
Is it possible to define multiple document type for service PR depend on the company code/ Plant level?
Kindly help.
Regards
DPHi Ravi,
I used the User Exit COZF0001 . Since we can assign only one PR doc type in the config .
I have assigned one PR doc type in configuration which will work for a company code and all their respective plant. So in this case user exit wont do any job for changing the doc type.
You will defined a condition in the User exit saying that if company code /plant which you get it from maintenance order is not same (Config ) then provide the PR doc type which you want to create for respect plant or company code.
I dont have coding right now with me. You need a small coding to be done to create the separate PR doc type in EBAN-BSART
with respect to plant . Check in your configuration at what point of time you are creating the PR either in saving or release of MO. You can take the even to activate the User exit.
Consult your ABAPer they can do in 10 min.
DP -
Deletion of Reservation item generated from Maintenance Order
We have a peculiar problem.
In Production system, weu2019ve close Maintenance Order that has a component reservation. When closing the Maintenance Order, the reservation has been set deletion flag but two components are not being marked for deletion.
We only have two reservations on Production system with this situation, on any other cases the reservation takes the deletion flag when closing the Maintenance Order.
What could be the problem?Hi,
Check whether you have done good issue for that component .
whenever you do Teco open resurvation will cancelled.
Regards,
vinit -
Service PR generated through maintenance order
Hi Friends,
I am creating a maintenance order in which i am using external services(Control key PM03).
The PR is getting generated, but delivery date in the PR is not editable or modifiable its greyed out.
How to make the field editable.
please advise
Thanks in advance
Vivek
Edited by: vivek mankad on Jan 27, 2009 5:05 AMHi Friends,
We have solved the problem using the user Exit. If you want to change the delivery date in the PR generated through maintenance only option is through user exit. Even if you use user exit the field will not be modifiable. What we did was we created a new field where we maintain the delivery date and used the user exit COZF0001 to pick the date from the field. Now whatever date is entered in that field will be displayed in the PR.
Thanks a lot guys.
Vivek -
Table for PO-Maintenance Order Relation
Hello Experts,
I would like to have an idea about all the Maintenance Order which have got PO as the Subsequent Document.
in which Table can I find the same.
Thanks in advance.
Regards,
Yawar KhanHi
I donu2019t think if there is any single table in which you can get the PM Order Vs PO Number. However you can find it as below as explained by Mr Kolla Pushpa also .
In the Table EBKN put the Order number in the Field AUFNR it will give the PR value field BANFN.
Put these PRs number in EBAN to get PO Number.
Regadrs
Sameer -
Commitment with maintenance order
Hi guys,
I d like to know if is possible with WBS Report S_ALR_87013533 - S_ALR_87013542 to see the column Commitment the Purchase order or the purchase requisition of the Maintenace Order.
Exactly i edit a Maintenance order with a WBE, in him document flow there re the purchase requisition and Purchase order.
These documents are without WBE and Cost Center.
When i edit the Incoming Invoice just i can see it (the total) in the column Actual total.
There re the Report of PS where i can see all the documents flow of a Maintenance Order? Like a Commtiment and the incoming invoice.
Kind RegardsYou can try CJI5 and CJI3 for commitment and cost respectively - in the network/order field enter the PM order number
-
Short text from notification not to be copied in maintenance order
Hi
My user requirement is that when a notification is created , the short text of notification is NOT TO BE COPIED IN work order as short text and first operation of work order.
Any one have any idea .Hello,
Please follow below SPRO path
Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders>Functions and Settings for Order Types>Define Notification- and Order Integration
Put the required order Type and Notification type together in this Configuration and for Coloumn Enhanced Object List
selectOption>Assignment of operations to object list entries inactive
(The enhanced functions for the object list are inactive. That means, an assignment of the operations of the order to entries in the object list is not possible.)
Regards,
Rakesh -
Can not post FI document with internal Order
Hi all,
I work with SAP version ECC 6.0. When I post a FI document with internal order, I have a problem":
"FI: Postings" is not allowed (ORD 400000)
Message no. BS007
Diagnosis
The current status of object 'ORD 400000' prohibits business transaction 'FI: Postings'.
Procedure
To process business transaction 'FI: Postings', you first have to change the status of object 'ORD 400000' to allow the transaction 'FI: Postings'.
This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
Pls help me a.s.a.p. ThanksHi,
Go to t.code: KO02 and enter the internal order no and click on control data screen, here u required to change the status from CRTD to Release(by click on release button) and save the data, then u can able to post the transaction.
Some times internal orders has been created but not released , if it is not released, system won't allow you to post any transaction by using this internal order. If this internal order has been released, then u r able to post the document by using this internal order.
all the best
Prasad -
Charm Normal Correction(Maintenance) not able to generate with SDMJ
Hi,
I have configured Servic Desk & CHARM newly. Urgnt correction is working fine.
But when i select the subject ' Normal Correction(Maintenance) ' in change request it creates a correction with Transaction type-SDMI
My requirement is SDMJ Normal Correction(Standard). why system is automatically taking SDMI insted SDMJ.
Regards
PKHi
Hav you activated the following BC Set
SOLMAN40_CHARM_TRANSTYPE_SDMJ
hope it solves
Regards
Prakhar -
Statistical Forecast not saved when generated with background planning job
Hello All,
The system I am working on is SCM 5.0 Support pack 15.
When I execute the planning job in the background to generate a statistical forecast, the job completes sucessfully, I have a spool that shows the forecast profile was executed (Auto Mod 2) with the appropriate model messages and the last two messages are 'Data saved successfully' and 'No data has been changed; data must not be saved', but when I go into interactive planning to view the forecast, there is no forecast in my key figure.
My planning area has the forecast settings maintained for Statistical Forecast, Corrected History, and Ex-Post Forecast key figures. My forecast profile is looking at the History key figure and Statistical Forecast key figure. My time series has been initialized for 36 months of History and 18 months of forecast. My planning book is set to have the Statistical Forecast Key figure as output only. My activity and planning job are set to execute in the appropriate planning book (in order to see the forecast alerts I have selected) with the specific selection profiles (no navigational attributes), and the aggregation level set (no navigational attributes).
The only way for me to see a forecast is to change the Statistical key figure setting in the planning book to output/input, execute the forecast job in the background, and then go into interactive planning. Am I missing something? Any help you could provide would be greatly appreciated.
Regards,
Roxane H.Hello Senthilrajan,
I have executed the forecast in the foreground using the same planning book as the background job and same forecast profile (Auto Model 2)with a selection from the batch run (pulled a selection from the spool list) and it generated a forecast with the same messages as my background job except for the last two lines (Data saved successfully and No data has been changed, data must not be saved) that I was able to copy back into interactive planning. I then used this selection in the background job to execute the forecast in the background and did not see a forecast in interactive planning and received the same messages as before -
Data saved successfully
No data has been changed, data must not be saved
The reason we run the forecast in this book is to allow our Demand Planners to view the forecast alerts by book and/or selection directly in interactive planning instead of having to get their from the Alert Monitor. It has worked in the past and is currently working in the same environment just with a different planning book, selections, forecast profiles, and data. It generates a forecast with no 'No data has been changed, data must not be saved' message and the forecast is written in the key figure and is viewable in interactive planning with out manipulating the key figure to be input/output (it is set to output only).
Any further assistance you can provide would be greatly appreciated. -
Printing Services do not accept PDFs generated with Pages
Hello,
I have a MacBook Pro, OS X 10.4.1 and I have been using Pages to generate documents which I then turn into PDFs before sending to a printing service for printing. However, several print services that I need to use to stay cost competitive cannot accept PDFs generated by Pages (I believe they said or Quark). The print service printers will not print PDFs created by pages. I've probably spent 2 weeks trying to work my way out of this one and I can't seem to find a solution other than to manually rework all my files into Word documents which could take months. Does anyone have a suggestion for me? Thank you so much,
WendyI need to use to stay cost competitive cannot accept PDFs generated by Pages (I believe they said or Quark)
The print publishing industry has agreed on a specification for print-ready PDF. The specification is an ISO standard known as PDF/X for blind eXchange, meaning that if the person preparing the digital master applies the specification then the person printing the digital master can depend on the master to be printable.
QuarkXPress 7 includes PDF/X authentication internally and Apple Pages includes PDF/X authentication externally through the sysem-level Apple ColorSync filters. The print service provider should inform you of the printing condition she is selling you and should provide an ICC type PRTR printer profile for that printing condition.
The ICC printer profile determines the ink limit, the detail in the highlights and the detail in the shadows, the gray balance relative to the tint of the paper (whether bluish, yellowish, reddish, or near neutral) and matches the laydown order of the inks in the printing system. If the print service provider has no ICC printer profile for a custom printing condition, ISO 12647 reference data are available from www.color.org and the print service provider should be able to build a separation to suit her process from that. This ICC printer profile should be set as the OutputIntent in the PDF/X filter, whether in QuarkXPress, in Apple Pages, in Adobe InDesign, in Adobe Acrobat or in any other compatible application.
Best,
Henrik -
Inter-book links not working files generated with Acrobat 9 Pro
Dear All,
We're using TCS 2.5 and generating PDF using Acrobat Pro Extended 9 from our FM 9 guides. We have many links between guides and these links no longer work. Now only the xrefs within a guide work.
We have the same relative paths for the FM guides and PDF and keep all the guides open when generating them and when generating the PDFs.
The links appear active (acrobat displays the little hand) but when you click the link nothing happens.
We have no problems using FM 9 with Distiller 7, but we've upgraded to TCS on some machines and this is where we're having this problem (on machines with Acrobat Pro Extended 9). Does anyone know if this is a bug? or a conversion setting that we don't know about?
Thank you for any help or suggestions you can provide!
Regards,
SusanneI've found that down loading the PDF file to the Nook and using Acrobat reader allows the links to work, however this is way cumbersome, any way to work on files directly on Acorbat.com?
Maybe you are looking for
-
The operation could not be completed -12894
After transfer data from iMac to iPhone, the operation couldn't be completed. Can I help you?
-
When I click on a link from a web page opened in Safari I get a blank black screen. Why can't I see the contents of the page?
-
ORA-03113, I don't find the issue
Hi all, I'm desperate I'm trying to create a new database, I used the "Database setting wizard" and I got an error : "ORA-03113" Each time I try, It occurs while the "Creation and starting an Oracle instance" is running. I searched on the web, I didn
-
I open by default .gif files with the Mail application.
But every time I try to open one, it asks me to confirm because it says it was downloaded from the internet. How can I remove that check? Thanks, Roberto
-
Hi there. I have a rtf file in which I am inserting string using Java: FileInputStream fis= new FileInputStream(exampleFile); RTFEditorKit rtf = new RTFEditorKit(); Document doc = rtf.createDefaultDocument(); rtf.read(fis, doc, 0); doc.insertString(5