PR number range after MRP is not triggered

Dear gurus,
              My MM consultant needs a seperate number range for Purchase Requsition during the MRP Run.I have configured  in Plant Parameters number range for PR and also since we are using the MRP Group.I have configured the purchasing doccument type in MRP group.But after MRP run system generates the different number for purchase requistion other than the configured.If i create manual purchase requsition it is creating in my number range(correct number range).ie)My requirement is sytem should generate seperate(correct)  number range which i configured in Plant parameters.Can any body suggest what are the configuration missing in my end.
    For your information.The Raw  materials are  extened to new plant
                       please give your valuable comments and suggestion
                                                                                -guna

Dear Prabosh,
we are doing the rollout implementation.
          My problem is i am not getting the  correct number range for MRP generated Purchase Requistion.The PR number which is generated by the MRP system is 11194121(which is the no range configured for another existing plant.the same material is extended for new plant).(In mrp generated PR,doccument type is correct only the pr number is wrong.)But I have configured the different number range(range 2800000000) for Doccument type.Please see my configuartion.If i create manually with docc type vad it is picking the correct number range280000000.but after mrp also the number range for pr should be in 280000000 series.this is my problem.Mr.Pradeep told that "pr number range which is is generated by MPR syststem should always be different.if we create manual pr against the same material the number range  will be different.".
            we are doing rollout implemenation.i checked in existing plant with existing material.first i create the manual Purchase requstion.the number is 11193212.The PR number which is generated by the MRP system is 11193215.I checked the PR no 11193213/11193214.But it is not exists.whether any configuration is left in my end? any user exits will be used by this? Please go through my configuartion and suggest.
Please help me.since we are in Testing phase.It is very urgent issue.please help me
              i have already send the screenshots to yur id also
guna

Similar Messages

  • Issue on Number Range for MRP Purchase Requisition

    Hi Gurus,
    Please help me on the issue explained below.
    We are already using SAP ECC 6.0 and SRM 5.0 and now we are implementing Plant Maintenance Module.As a result of this implementation ,we have created number of PR document types and assigned to unique number ranges in ECC. One of these document types has been maintained for MRP group for a material type in order to identify the MRP purchase requisitions created on the shortage of the materials for these material types.
    This functionality is working fine. MRP run for the materials is picking the appropriate PR document but number range of the document is not the same what was assigned to the linked document type.Some other number series is getting picked by system .
    There is setting under SPRO Consumption Based PlanningNumber RangesPurchase Requisitions
    Here, number range assignment is against plant. This is the same number range which is being taken by system on running MRP. But the desired number range is the one which has been linked to PR document type.
    If I change the number range above then number range for MRP PR in present system will get affected..
    Can you please advise me on above so that PR generated on MRP run should have appropriate number range?
    Thanks & Regards,
    Niti

    Hi,
    As per my understanding, what you have mentioned above is exactly the way SAP is designed. Its SAP Standard behaviour.
    But if you check your PR document type - no:range & the CBP no:range both will be same only since both refers to the same object.
    Please check the PR document type that you have assigned in the CBP & its no:ranges.
    Thanks & Regards,
    Ram

  • Billing Number Range problem ( accounting document not generated)

    Hi All,
    I have created some billing types and for them I have assigned some internal number ranges. Now when I create a billing document it is getting saved with the proper number range but no accounting document is getting generated.
    Also when I try to release the invoice I am getting an error which says " *Incorrect doc.no.: 10000009. Select document number between 0090000000 and 0099999999* "
    K I N D L Y     suggest  as U R G E N T.
    Regards,
    Danny.

    Dear,
              Billing Number Range problem ( accounting document not generated) is not an error because when you create billing document then accounting document not generated. Accounting done after posting of that billing document with VFX3 or VF02 T.Code by account department.
               And for second issue you had define number range between 0090000000 and 0099999999 for invoice so thats why it happen.
    Regards,
    Sandip Shaktavat

  • Error :number range interval 01 does not exist

    Hi,
      i created a number range object Z_REPORTID in SNRO for autogenerated ids and later used the function module NUMBER_GET_NEXT. After execution i got the following error.
    For object Z_REPORTID, number range interval 01 does not exist
    Message no. NR751
    Diagnosis
    The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
    Procedure
    Create the missing number range interval in customizing
    Please help me to trace this out.
    Thanks,
    Anila

    Hi
    AFter creating the number range interval in SNRO you must TRANSPORT the interval. In the first screen --> Interval --> Transport.
    Did you perform that step?
    If you did that it should work well. Itried the same now and it is working fine.

  • Corrupted Number Ranges After Unicode Conversion

    Hello Gurus,
    Has anyone had corrpted number ranges after UC conversion
    After a Unicode conversion the number ranges are no longer valid?
    We are doing a Unicode conversion from Informix to DB6 unicode on AIX.
    Kind Regards
    Lawrence Brown

    Hi Lawrence,
    I never heard from any Unicode conversion customer that number ranges did not work anymore after the Unicode conversion. Maybe the DB migration plays a role here ?
    Best regards,
    Nils Buerckel
    SAP AG

  • For object RF_BELEG OK03, number range interval 33 does not exist

    Hi. After new year I opened financial and material periods (01/2008). When I want to make some movement in MB1B - the communicate occurs:
    For object RF_BELEG OK03, number range interval 33 does not exist
    Could You give me some tip what should I do now?

    go to j1i9  or  snro
    enter uour object name
    assign here
    no range 33

  • Number range intervel 50 does not exit fbn1

    Hi,
    I am getting these Error while using MIGO Transaction in Quality server.plz tell me how can i Solve these problem.
    for object rf_beleg gvk,number range intervel 50 does not exit fbn1

    Dear
    Maintain the number range for invoice documents in FBn1 t.code for 50 for the fiscal year 2009
    prodecure add in new intervels,
    Ex:
    No year   from number             to number
    50  2009  1000001                   1999999
    Regards
    venu gopal

  • Object RV_BELEG  number range interval 01 does not exist

    Hi Gurus,
    I need suggestion or solution to solve my problem when creating sales order(standard order) from VA01 transaction.
    Error Descriptio and Message:
    For object RV_BELEG , number range interval 01 does not exist
    Message no. NR751
    Diagnosis
    The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
    Procedure
    Create the missing number range interval in customizing.
    Transaction code:
    Reporducing the error:
    Screen flow: VA01 Intial Screen Input
                          Order Type: SD  'Subs.Dlv.Free of Ch'.
                          Sales Org : 
                          Enter.
                          Next Screen: Click on "Complete Dlv" push butoon.
                          It will take to next screen go with "SAVE" option.
                          Iam getting an incomplete Delivery want to edit.
                          Go with "EDIT" and give Input in "ORDER REASON" drill down option.
                          select any one option and go with arrow symbol in the menu "EDIT NEXT DATA" or F5.
                          Provide Input In "Customer Group" drill down option select any one option from it.
                          Again go with arrow symbol in the menu "EDIT NEXT DATA" or F5.
                          Here iam getting an status "Document is complete".
                          Click on "SAVE" option.
    Here status message error showing: "For object RV_BELEG , number range interval 01 does not exist".
    This is the issue occuring with me while creating Sale Order from VA01.
    help me if any one have know solution or suggestion to solve error.
    Tnks & Rgds
    Bhaskar

    This because of the missing SD Document Number Range.
    You can check this in tcode SNRO for object RV_BELEG.
    Ask your SD Consultant to Change the number range assignment  or create that missing 01 number range number object.
    This will solve your problem,
    Regards
    Karthik D

  • RF_BELEG GMR, number range interval 51 does not exist FBN1 Message no. NR75

    HI ALL
    IAM GETTING  THIS MESSAGE WHILE POSTING MIGO
    For object RF_BELEG GMR, number range interval 51 does not exist FBN1
    Message no. NR751
    Diagnosis
    The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
    Procedure
    Create the missing number range interval in customizing.
    Transaction code: FBN1
    Regards,
    parameshwar

    Hi,
    check following link
    [problems in goods receive t.code MIGO;
    Regards
    Kailas Ugale

  • For object RF_BELEG 2020, number range interval 50 does not exist FBN1

    Hi Guru's
    While posting GR i am getting this error
    For object RF_BELEG 2020, number range interval 50 does not exist FBN1
    kindly guide me to slove this error. Thanks in advance
    Regards
    Anandh

    Hi Piyush Mishra
      I have entered the number range intervals in FBN1. Still the error is existing.
      Number range interval 50 means ?? Any specific range of 50 we should give ???
    regards
    anandh

  • For object RF_BELEG LT, number range interval 50 does not exist FBN1

    dear all
    system showing this message (For object RF_BELEG LT, number range interval 50 does not exist FBN1)

    Hey Manish,
    You can use these t-codes.It can be solved with all together number ranges.
    1- OBH2
    In this activity, you can determine which intervals of document number ranges are to be copied from one fiscal year into another per company code.
    2- OBH1
    In this activity, you can copy intervals of document number ranges from one company code to other company codes. To do this, you have to store the following information:
    Wish you all the best.
    Onur

  • Error: For object RF_BELEG 9000, number range interval 92 does not exist FB

    Hi,
    When I am executing AFAB in test run mode for a particular company code I am getting below mentioned error:
    +For object RF_BELEG 9000, number range interval 92 does not exist FBN1+
        +Message no. NR751+
    +Diagnosis+
        +The database table NRIV has the delivery class 'C', i.e. the SAP default+
        +settings are only in client 000.+
    +Procedure+
        +Create the missing number range interval in customizing.+
        +Transaction code: FBN1+
    When I maintain number range 92 this error goes away. My question is we have no where assigned this number range 92 to any of the Document type then why system is asking to maintain the same?
    Sanjay

    Hi,
    You might be using the number range (say 92 which you've created in GL view & not in ENTRY view).
    Steps:
    Go to Define Document Number Ranges for Entry View OR use T-code FBN1.   Maintain & Assign two Number Ranges say 91 & 92 one for Document Type AF and another for AE for both the non-leading Ledgers say Y1 & Y2 ( Define Document Type for Entry VIew in a ledger). Also assign a number range to
    Document type SX (Closing Posting) apart from the above two Number Ranges (91 & 92)
    Hopefully it works for You............
    Dipti

  • Number range object HRTR_PDOC : Interval not found

    Hi,
    I am doing Travel Mgt testing i got two problems
    1. Travel Policy is not taking when entering the expences
    2. when posting the doc to FI the error "Number range object HRTR_PDOC : Interval not found" is coming
    Pls suggest
    thanks in advance
    chandu

    Hi,
    Check table NRIV
    Regards,
    Manoj.

  • For object rf_beleg 3000 number range inerval 50 does not exist FBN1

    for object rf_beleg 3000 number range inerval 50 does not exist FBN1
    in ob52 i see the following for my cc 3000
            from period1   year    to period   year     from period 2   year  to period year
    3000+        1         2003       12        2007         13                2007   16  2007
    3000A        1        2003        12       2007
    3000D        1        2003         12      2007
    3000K        1        2003         12      2007
    3000S         1       2003         12      2007
    when i try to post a goods movement for a po i get the following error
    for object rf_beleg 3000 number range inerval 50 does not exist FBN1
    is something wrong in this table???????
    any help would be great
    thank you in advance

    Hi
    This is not connected with Posting periods but with  document number ranges.
    Create document Number range interval 50 for year 2007 using T.code FBN1.
    This should solve ur problem
    Regards
    Aravind
    Assign points if useful

  • Purchase requisition  number Range in MRP Run (MD02)

    Hi Experts ,
    When I run the MRP through T-Code MD02 even in test mode the Purchase requisition number getting consumed with out saving the entries.
    for eg:- number range = 100 to 200.
    when I execute the MD02 by selecting the indicator "Display results before they are saved " system showed a Purchase requisition number 100 and exit with out saving the entries.Next time when I execute the same MD02 system is displaying the purchase requisation number as 101, where as i have not used PR number 100 at all.
    Please guide me....
    Regards,
    Sri.

    Sri,
    Nothing is missing.  This is standard behavior.  It appears to me that SAP makes no effort to ensure that all Purchase request numbers are contiguous.
    You can try turning off number range buffering.  This will reduce the number of gaps in your purchase req number sequences.  However, I don't know if it will eliminate all gaps.  Be aware that there is a performance tradeoff when you deactivate buffering.  Making this change is considered to be a system modification, and is not supported by SAP.
    https://service.sap.com/sap/support/notes/62077
    Rgds,
    DB49

Maybe you are looking for

  • Cannot change "New Event" to an event name in iCal

    For several days whenever I enter a new event in iCal I can put in all the information (times, etc.), but it will not allow me to change "New Event" that appears at the top to the name of the event.  So I have several events now called "New Event," a

  • Unable to Print a .pdf less than 100% size

    I used to be able to print out the address book at 75% or 80% to make a smaller booklet.  Now it prints at 100% no matter what percent is entered.

  • Query log file location?

    Is log file is created when query has completed execution, if yes plz tell its location.

  • CNN videos won't play

    For the last couple of months, I have been unable to play video form the CNN.com site on Safari, Firefox or any other browser. I've tried different user login and that didn't work. WHen I select a video I get a black video panel with a play bar. When

  • Compatibilité Labview 6.1 &.8.2

    Bonjour, j'ai réalisé une application sur Labview 6.1 et je suis passé a la version 8.2. Par contre, je rencontre quelques problemes lorsque je suis passé a la version 8.2 de Labview. Il s'agit sans doute d'un problème de compatibilité mais que je n'