PR & PO approval from SMS
Hi all,
I have a requirement, in which i have to send email notification and SMS to the approver. if the approver decides to approve the PR from the SMS itself , he can do that or if the approver wants to approve the PR from SAP he can do that too ( two options are open from him).
If the approver appproves the PR from SMS itself then the workitem from his inbox should disapper.
Please help me how to do it.
Regards
Balaji E.
Message was edited by:
Balaji Kalaivani
Hi BK,
I do not know how an SMS would handle approving a PR or PO, but I think if you could send a message to user's Mobile where he generally accesses mails on his Mobile say like Outlook from where he could execute the work item.
If you looking for such a kind of a solution then first you need to register with the Mobile service provider for this service of you sending the messages/workitem from SAP to Mobile (I mean say 9876543210'@'vodafone.in).
After this you could check std SAP FM's like SO_OBJECT_SEND which could do this.
I also remember having read a blog on this SMS, if get that link I shall amend it to this thread.
Hope it helps.
Aditya
Similar Messages
-
I recently switched the sim card in my iPhone when I moved from one country to another. When I put my local sim card in iMessage would not activate (just staying on 'waiting for activation' forever). This has not been a problem before. When I went to send/receive I saw the phone number there is still on the old one from the country I left. This is not the case in phone settings when I look for 'my phone number' or in facetime, which recognise the new number.
Plus I keep getting text messages from 'SMS Info'. They are just code, except that in there my new phone number is included among the code. The only other discernible characters are the letters 'REG-RESP?'. Perhaps this is something to do with an error in registering my new number.
I have tried-
1. Turning it off and on again.
2. Turning iMessage off and on again. This results in the usual 'it may cost you to reactivate with an SMS' popup on my phone screen, then a popup saying there has been a mistake, then one of these coded SMS messages.
3. Doing the above in combination with logging in and out of my apple id (as suggested on another forum post here)
4. Removing the new sim card and replacing the old one. Then turning off iMessage, replacing the new sim card and turning iMessage back on (of course powering the phone down and up)
None of these remedies have worked. The iMessage problem is affecting all sorts of my messages. Windows keep popping up saying that I may have to pay for an SMS to activate iMessage, except that it doesn't activate. The SMS messages from 'SMS Info' keep coming and I can't seem to get any of it to stop an just work normally.
I have looked in these forums already and can't see the same problem elsewhere. If someone could figure this out I would be most grateful.Hi,
When a Mac is "registered" for iMessages account with an Apple ID the Serial Number of the Mac is used to create an Auth Token as it is called for the Messages app that allows that Mac to work.
I would guess a similar process of linking the Number of the iPhone to a Hardware fact about the device is also in place.
I would contact Apple Support and check with them. (you might need to speak to a Level 2 person as Level 1 people are script led and try to fit everything into Software or Hardware categories where as sorting and Apple ID (which the Number is in this case) is normally Free).
I did find this iOS: Troubleshooting Messages - Apple Support
It starts off about sorting SMS that is not working.
This one has a bit on Unlinking an iPhone Number (with or without the iPhone) iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
7:55 pm Tuesday; January 6, 2015
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Error while opening leave/Timesheet approval from UWL
While opening the leave/Timesheet request for approval from UWL the following error is coming
Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"? "
The user id is not locked in R/3 and assigned to a personnel number having valid begin and end date and is also having SAP_ALL and SAP_NEW profile is R/3. Anybody having any idea why the error is still coming?Its not coming from any other ESS or MSS Page..
Tnaks and Regards
DevHi,
Check the below thread that may help you.
/message/7215329#7215329 [original link is broken]
Raghu -
How long does it take to get approval from iTunes Connect and how do I find out if they are even working on it? I'm not really sure if my application was even delivered - from the links in IBA. Any suggestions how one might push the right buttons at Apple?
Also went around in a big circle trying to get beyond the confusion of not having the right Apple ID when I've had it a long time. Confusion abounds and learning this forum also takes a new degree of patience. Humbling to say the least :-)
Anyone been there done that?[email protected]
[email protected]
…support phone number call +1 (877) 206-2092.
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada. -
Approved from/to Date Permit in a maintenance order IPM2
Hy.
In the list of permits for maintenance orders (transaction IPM2) appears two fields:
- Approved from Date: Date from which the permit is valid as being issued
- Approved to Date: Date untill which the permit is valid.
But I am not able to change these values. Do anyone knows how is possible to add these information to a permit?
Thanks for your help.Hi
1. Depending on the application component in which you are working, choose one of the following menu paths:
Logistics ---> Plant maintenance -> Management of technical objects / Maintenance processing> Environment> Permits
Logistics ---> Customer service -
> Management of technical objects / Service processing ->Environment-> Permits
The overview of all the permits appears.
2. Select the required permit and choose Details.
3. Make changes as required and save the permit.
Technical name: SAP_PM_EQM_PERMITS_ISSUE_DISPL
This role contains all the functions that you require to issue and display permits
The following activities for permits are available with this role:
Changing a permit
Displaying a permit
Regards from Pakistan
Edited by: Saif Ali Sabri on Jan 15, 2010 12:35 PM -
Workflow : Approval from outside SAP (Non-SAP User)
Is it possible to have an approval level outside sap , if so how can we do it .The approver has no access to SAP .Please explain the process to achieve this requirement
Hello,
The extended notification concept can be used for the users which is not having the SAP access. So the users no need to log into the system to approve from the business workplace but they can approve from their outlook mail also. The transactions are SWNCONFIG , SWNADMIN.
Please find the below link to configure.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f01448bb-324f-2a10-fe96-cb36c26a3089
Thanks,
Neslin. -
Required Parallel Approval from OTL Timekeeper Entry Form
Hi All,
Is it possible to perform parallel approval from OTL timekeeper entry form? it is using the following workflow OTL Seeded Approval Workflow HXCSAW(i think) if it is using this workflow can we change this workflow or need to write a new workflow for above mentioned requirement.
Please share you experiences , its urgent
Regards,
SsaliHi,
HXCSAW is a custom workflow which do nothing accept approving and that can be change as per customer requirement. This child workflow called by parent workflow process HXCEMP. If u going to change the HXCSAW then u also need to change the seeded package associated with this workflow to embed your logic.
We have done it through SSHR timesheet entry page, no idea if OTL timekeeper entry form carries approval or not.
Whts the nature of ur parallel approval ? and how u can able to manage if via workflow ?
Regards
Ayaz -
I turned off MMS today and suddenly all my text messages dissapeared from SMS 'inbox'. switched the iphone 4s on and off many times, nothing. If I search for an old text message by text I can see it, but it's not in the box of SMS
show this link to your friend http://support.apple.com/kb/ts5185
-
Hot to remove 'Approver' from Role dropdown in Collaborator List?
Hello Experts,
How do you remove or add values to standard enumeration type fields?
For eg., if I wanted to add a value to 'STATUS_INDICATOR' in Prpoject (could not find it in the standard value list types).
Or if I want to remove 'Approver' from the Role dropdown of Collaborator list?
Thanks & Regards,
SubhasiniThere's a Value list called Project Status you can edit to customize your list of project statuses.
The Collaborator Role Definitions can be edited by going to SETUP>General> Collaborator Role Definitions
however, i would not remove the Approver role as this would hinder system functionality surrounding approval workflows. -
MSS ECM preventing approver from planning & approving same employee
Hi,
IIn Enterprise Comp, is there any way to prevent the Approver from being able to plan for a subordinate and approve him as well?
Thanks, VladHI Vlad,
I think this can be achieved through authorizations and evaluation paths. The following threads may help you:
Enterprise Compensation Management (ECM) and Approval Process?
Authorizations in ECM?
Authorizations in ECM..?
Credit: Inputs from community members
Donnie -
SQL Query (Migrating report from SMS 2003 and SCCM 2012R2)
Hello everyone,
I solicit you because I have to work on migrating reports from SMS 2003 and SCCM 2012 R2.
The following SQL query causes me some problems:
SELECT DISTINCT SYS.Netbios_Name0 AS Computer, (SELECT SUM(ProcAddtl.NumberOfLogicalProcessors0) FROM v_GS_Processor_Addtl0 ProcAddtl WHERE ProcAddtl.ResourceID=SYS.ResourceID) [Cores], CS.NumberOfProcessors0 AS CPU, CPU.MaxClockSpeed0 As Speed, CPU.Name0, MEMORY.TotalPhysicalMemory0/1024 AS [RAM Mb], (SELECT LDISKS.Name0 + '=' + CONVERT(varchar(15), LDISKS.Size0/1024) + ' | ' as 'data()' FROM v_GS_LOGICAL_DISK LDISKS WHERE LDISKS.ResourceID=SYS.ResourceID AND (LDISKS.Name0='C:' OR LDISKS.Name0='D:') ORDER BY LDISKS.Name0 FOR xml path('')) [Logical Disk (Gb)], (SELECT LDISKS.Name0 + '=' + CONVERT(varchar(15), LDISKS.FreeSpace0/1024) + ' | ' as 'data()' FROM v_GS_LOGICAL_DISK LDISKS WHERE LDISKS.ResourceID=SYS.ResourceID AND (LDISKS.Name0='C:' OR LDISKS.Name0='D:') ORDER BY LDISKS.Name0 FOR xml path('')) [Free Space(Gb)],CS.Manufacturer0 AS Manufacturer, CS.Model0, OS.Caption0 AS 'OS', (SELECT CONVERT(varchar(10), NIC.Index0) + '=' + NIC.IPAddress0 + ' | ' as 'data()' FROM v_GS_NETWORK_ADAPTER_CONFIGUR NIC WHERE NIC.ResourceID=SYS.ResourceID FOR xml path('')) [Network], (SELECT Count(Name0) FROM v_GS_SCSI_CONTROLLER SCSI WHERE SCSI.ResourceID=SYS.ResourceID AND SCSI.Name0 Like '%Qlogic%') [# FC HBA], INFONOYAU.RoleServeur0 AS Role, INFONOYAU.Zone0 AS Zone
FROM v_R_System SYS
LEFT JOIN v_GS_COMPUTER_SYSTEM CS ON CS.ResourceID = SYS.ResourceID
LEFT JOIN v_GS_PROCESSOR CPU ON CPU.ResourceID = SYS.ResourceID
LEFT JOIN v_GS_X86_PC_MEMORY MEMORY ON MEMORY.ResourceID = SYS.ResourceID
LEFT JOIN v_GS_OPERATING_SYSTEM OS ON OS.ResourceID = SYS.ResourceID
LEFT JOIN v_GS_Informations_Noyau0 INFONOYAU ON INFONOYAU.ResourceID = SYS.ResourceID
LEFT JOIN v_FullCollectionMembership COL ON COL.ResourceID = SYS.ResourceID
WHERE COL.CollectionID = @CollectionID ORDER BY SYS.Netbios_Name0
Can a charitable soul help me to migrate this query to a SCCM 2012R2 report?The following SQL query causes me some problems:
Why? What's happening?
Torsten Meringer | http://www.mssccmfaq.de -
I Cloud approval from other device or verification code?
I just upgraded to IOS8 on iPad 3 and iPhone 6. For the I cloud set-up it is asking for an approval from another device or entering a verification code.
1. How to approve from other device? I have an iMac as well. OR
2. If you enter code the message is a verification code will be sent to a phone number (which is my house phone....does not receive texts).
What to do?Hi Brad0266,
Thank you for using Apple Support Communities.
From your post it appears that you have enabled two-step verifcation for your Apple ID, which is why it is prompting you to enter in a verification code from a device that you set up. Take a look at the support article linked to below to learn more about two-step verification.
Frequently asked questions about two-step verification for Apple ID
Cheers,
Alex H. -
How to find the approver from request key
How to determine the approver from request key.
If the approver is a group where do i find the correlation.
I have checked WFTASK and WFTASK HISTORY but unable to correlate. This is with respect to OIM 11G R2
Many Thanksselect IDENTIFICATIONKEY, TASKID, TASKGROUPID, TASKNUMBER, OUTCOME, STATE, ASSIGNEDDATE, Assignees, APPROVERS, TASKDEFINITIONNAME, CREATOR, ORIGINALASSIGNEEUSER, SUBSTATE from WFTASK where identificationkey = <request key>
-
I amtrying to restore an iphone4 to its original default settings after obtaining approval from my carrier. I am using itunes and following instructions given. It has been stuck on "verifying iphone restore for about 1 1/2 hours with no movement in the bar across the phone itself. Task manager is showing very little activity. I have internet connectivity. Is this an issue here or with apple? Thanks.
Thanks. Finally unhooked the phone and then tried again. This time it went into recovery and reloaded all as it should have and gave me the "unlocked" message which was what i wanted to see! thanks
-
Crypt acquire context failed with 0x8009000f after upgrade from sms 2003 to SCCM 2007 SP1
I've upgraded clients from SMS 2003 SP3 to SCCM 2007 SP1.
In the SCCM console some ressources are showing as not being client.
If I look on the machine, I can see that client is installed but the client cannot communicate with the management point.
CCMEXEC.log shows the following error message :
Crypt acquire context failed with 0x8009000f.
Failed to create certificate 8009000f CcmExec 21/04/2009 9:49:10 1948 (0x079C)
CCMDoCertificateMaintenance() failed (0x8009000f).
So, the issue is related to certificate
If I go to C:\documents and settings\all users\Application Data\Microsoft\Crypto\RSA\MachineKeys and delete the file begining by 19c5cf... and then restart the client the problem is solved.
Can someone explain what is happening ?
What can I do to prevent this problem
Kind regardsIn Server 2008 R2 SP1 (when Pushing Out SCCM 2012 clients)
I just added another account to the security (local Administrators) for the key which starts with 19c5cf...
and restarted the SMS AGENT HOST SERVICE.
Thats also resolved the problem. (NETWORK was the only security account on the key file).
Maybe you are looking for
-
New macbook after old sent in for repair
So I sent my white macook core duo in for repairs since it would not recognize the battery. Three days after sending the computer in I received a call from apple saying that they wanted to keep my computer and send me a brand new one. Something about
-
Arranging events in chronological order
I am experiencing difficulty in arranging events in chronological order. For instance, if I type in an event for 10 am on a particular day, and later type in an event on the same day at 2 pm, the 2 pm event appears ahead of the 10 am event. When I at
-
I live in Japan and have a Japanese laptop with English language packs but firefox loads in Japanese
I live in Japan, have bought a Japanese laptop and loaded up Windows Ultimate to have displays in English. I want to install Firefox but when doing this it installs the Japanese version. How do I get Firefox in English please?
-
Cannot publish site changes since upgrading to 10.7. Suggestions?
I cannot publish site changes since upgrading to 10.7. Suggestions?
-
Bonjour comment commander un livre sur iphoto 8 (7.1.5) en ayant mac os x 10.6.8 et donc pas la possibilité de prendre iphoto 9 (qui ne semble compatible qu'à partir d'une version de mac plus évoluée) merci Nico283