PR Release Stratergy Workflow

Hello Experts,
I am tring to implement a workflow for PR Release Stratergy.
For releasing PR 3 person are being invloved.
For this i am using SAP Standard workflow WS20000077
I did all the manual configuration in SPRO and activate the workflow
I create a PR and release it through transaction ME54N but i didn't found any changes
No workflow was trigger...
Please help on how do i will test ?? what is the right way doing it for PR Release Stratergy ???

Hi,
1. Make sure your event linkage is active. This you can check in Basic Data --> Start Events .
Here column 'A' should be green for your event.
2. If this is fine, then turn on SWELS tcode, turn event trace on.
Create a PR and see if any event in traced in SWEL tcode.
3. If not, try forcibly triggering your workflow using SWUE tcode. If it triggers successfully, then ask your MM functional to check the configuration and you can create a entry in SWEC tcode of Business Object BUS2105 and event RELEASESTEPCREATED.
You can find the change document object name from SWED tcode.
Test it again. Hope the magic works.
Regards,
Raj

Similar Messages

  • Purchase order release stratergy Workflow

    Hi All,
    I am using SAP standard PO rel. workflow WS200000075 using BO BUS2012.
    At the first Activity - task(TS20000166) it determines Agent(receiver of workitem for releasing), through default rule(20000027), at simulation of rule it determines agent correctly, but its not doing so while we create purchase order.
    At event trace I am getting error - Import Container contains error 
    My Question is
    1. Do I have to map determined agent through Default rule to workflow container using a variable???
    2. Am I missing something in the workflow to map to any container?
    Kindly advise
    -Indrajit

    Hello
    I'm using the BUS2012 Object type in workflow task but in simulation the task run correct but in the transaction when modify a purchase orden the task send an error...
    maybe the error is similar...did you solve this problem?..
    Thanks!
    Wladimir E.
    [email protected]

  • PO approval Workflow based on the Release Stratergy.

    Hi ,
    i am creating PO workflow based on the release Stratergy, in which release group = aa , release stratergy = a1 , a2 ,a3 .
    If the PO is created according to a1 then it should goto 1 level approval, if a2 then to 2 level approval and if a3 then 3 level approval.
    i have taken BO as BUS2012 and using singlesteprelease as event for triggering the workflow. i am checking the multicondition say if taking bus2012.releasestratergy = a1 then 1 approval if a2 then 2 approval if a3 then 3 approval.
    my problem is the workflow is getting triggered but it is not accepting the values from multiple condition box and going to other part and getting struck or getting no where.
    please suggest.
    thanks in advance

    Hi Abhi,
    I Guess the approach your doing is different from the standard one (WS20000075) No need to go for any multiple conditions.
    1. Copy the standard workflow.
    2. Create a Rule (Refer Rule 168) with container elements as POnumber, Release strategy and Release Code (Depending on your requirement).
    3. Write an FM which will have 2 table parameter fields ACTOR_TAB and AC_CONTAINER and fill ACTOR_TAB with approver name.
    4. Use this rule in Release of PO step and correct binding and everything will work fine.
    Please revert back if you need more information.
    Regards,
    Gautham

  • Purchase order Release Stratergy-Error in Class CL01

    Purchase Order Release Stratergy:
    In CL01(create class) i have created the class FRG_EKKO and saved.Then in CL02(change class) under Basic data-Administrative data we found Assignment field tick is not selected and that is not in changeable mode.
    Because of that reason Error occured like Error in Class in SPRO release stratergy. Release is taking place in Development Server but not in Production server.
    Regards,
    Wilson Babu G

    Hi
    This indicator shows that objects are assigned to this class.
    The indicator is set automatically by the system.
    once you assign the class to any objects then this flag will come automatically.
    Please check if you have assigned the characteristics to the Class in CL02
    Please check if you have assigned the release strategy to the Class in CL24N
    Thanks & Regards
    Kishore

  • PO attachment will be attaached in po release strategy workflow

    Hi Gurus,
    PO creator are adding new attachment(Format : PDF) to  PO (ME22N Transaction).
    Where this PDF get stored and how to get retrieve this data Becoz need to attach this in mail in workflow.
    How to attach this file  in PO release strategy workflow as a mail attachment.
    Thanks,
    Ragav.
    Edited by: ragul1602 on Jan 9, 2012 2:21 PM

    Hello,
    Attaching a file isn't a problem; finding it is. Maybe you would get a better/quicker answer at another SDN forum (SRM?).
    regards
    Rick Bakker
    hanabi technology

  • Oracle UCM Release Date - Workflow

    In Oracle UCM the release date is shown at the date and time the content enters workflow. Is there an easy way to update the release date field with the date that the content is approved?. I am trying to report on the date that the content item was approved in the workflow, not when it entered the workflow.
    Does anyone know of an easy way to do this. Is there any way in workflow to write out to a custom metadata field the date and time the content was approved?
    Thanks in advance for your help with this.
    Data_Bitz

    What you're probably seeing is actually "dInDate" rather than "dReleaseDate".
    On the content info page the revisions table at the bottom has an (intentionally) mislabled column called "release date" that actually displays dInDate
    dInDate is when the content item was submitted.
    dReleaseDate is when the content item is released from all the workflow processing and indexing into the general collection.
    It is possible to have dReleaseDate set during workflow but only if you set wfReleaseDocument=1 in the workflow script(s).
    So report on dReleaseDate and ignore what's in the revisions table.
    Out of the box, UCM keeps dInDate as the date that you checked in the file. However, we have a product, "Workflow Solution Set" that updates the dInDate to the date that the item is released from workflow and thereby shows up in the revisions table and any other reports as the time the doc was actually approved for consumption. Check out our Workflow Solution Set product (for 10g and 11g) here: http://bit.ly/95Rocu
    FYI: you can see what is getting loaded in that table by appending "&IsJava=1" to the URL and taking a look at the REVISION_HISTORY result set.
    hope this helps
    Billy Cripe
    Fishbowl Solutions
    Edited by: @billycripe - Fishbowl Solutions on Sep 1, 2010 9:02 AM
    see http://bit.ly/95Rocu

  • Release stratergy

    Hi all,
    We r processing PO through Release stratergy.
    some time we need to change the  payment terms after the release of PO.
    So its amendment of PO & we need to process the PO again through Release process.
    but its not happening so.
    Regards,
    Supriya.

    Hi Supriya
    Did you have a characteristic for the field Payment terms as a char? I guess not. Please remember release strategy will work (again) provided you have the characteristics for the filed you wish to change in your rel class and in turn if it is assigned to your rel. group. You also have to set the release indicators as 6 for re_appear of the stg if you change the char value. Please use chars. which you can validate and change often and more importantly exists in CEKKO structure.
    Regards

  • Purchase Requistion Release Stratergy

    Hi,
    I have a situation where I need to get the details of the classification Net total in purchase Requistion for the particluar Release Stratergy and Release Group from the relevant table for raising an event manually in work flow, which I am uable to trace out.Please help in this regard for identifying the tables which holds the data of the Net value for the same.
    Thanks in Advance for your Help
    Regards,
    Krishna Mukthineni

    Hi Krishna,
    the classifications of the release strategy is best read via the API (interfaces) for the class system. To get quick results and to check, if your designed process could be working at all, you could hard-code the class' name and it's characteristics. Later on -- to be more precisely -- you should read the class name from the customizing and the characteristic definition from the class system.
    To get an example of how SAP determines the release strategy from the classification (which is kinda the other way round), you may consult the following function modules/coding sections:
    Function module ME_REL_COM_STRATEGY_EBAN
    --> Form strategie_neu
    ->-> Function module CLSC_SELECT_OBJECTS
    To see the usage of this function module within your system, you could set a break-point there and create/change a requisition in your system.
    The internal table iausp holds the values of the characteristics.
    The referenced characteristic you'll be possibly looking for is based on CEKKO-GNETW
    Best regards,
    Florin

  • Release stratergy for purchase order

    Hi,
    I have 2 company codes 1000& 3000.In 1000 we have created a release stratergy .What we have maintained for the company code 1000 are:
        plants in 1000 company code  are 1001,1002,1003..
        Class type : 032
        class         : ZPO-Release
       characterstics : ZPO-PLANTS
                                 ZPO-DOCTYPES
                                 ZPO-VALUE
       release group : 01
      release codes : 01     FI
                                01         GM
                                01         MD
                               01          PH
                               01         VP
    stratergy:       1f
                            2f
                            3f
                            4f
                            5f 
    all  this stratergy groups is assigned to 01 group.
    now for company code 3000 . Plant is 3001 we need the release stratergy :
      characterstics : ZPO-PLANTS
                                 ZPO-DOCTYPES
       release codes : 01     FI
                                 01          MD
                                 01     PH
    How we can get the release stratergy for company code 3000
    regards,
    shivdeep B
    Edited by: bsdeep on Jan 30, 2010 7:48 AM

    How we can get the release stratergy for company code 3000
    Under Release Strategy , if you go to details  , You will find Classification Tab, Under that, You need to maintain the Plant 3001 and required document type.
    Then When you do the P.O for the combination of that Document type and Plant Release strategy can be pick up.
    You can maintain the same through transaction code CL20N.
    by giving the class type.

  • Work Order Release Approval workflow

    Hi All,
    I am trying to setup Work Order Release Approval workflow. I have set its AME using supervisory level as the action type. When I tried set work order status, I had to set the department as I set department attribute as its AME condition, and work order status changed into Release - Pending and form become disable.
    Where can the supervisor make his/her approval to relese the pending status?
    I tried the Maintenance Super User page, but it can only review.
    Any help is greatly apprecaited.
    Thank you,
    Iqbal

    HI
    Please post EBS release version da and platform details
    1001759 wrote:
    Hi All,
    I am trying to setup Work Order Release Approval workflow. I have set its AME using supervisory level as the action type. When I tried set work order status, I had to set the department as I set department attribute as its AME condition, and work order status changed into Release - Pending and form become disable.
    Where can the supervisor make his/her approval to relese the pending status?
    I tried the Maintenance Super User page, but it can only review.please see if this helps you
    follow this navigation
    1. eAM
    2. Work Orders > Query for existing unreleased work order.
    3. Release it & submit for approval.
    4. Approve the WO.
    ;) AppsMAsti ;)
    Sharing IS Caring

  • PO Release strategy workflow not getting transferred

    Hi All,
    I have done all the configurations related to PO release strategy workflow but when transferred to Quality certain configuartion done in PFTC workflow builder are not getting transferred.
    I also got message like 'release of purchase order transferred to buffer'.
    Please guide.
    Thanks in advance
    Pavan H S

    Hi,
    In QA
    1) Go to SWU3 check Workflow Configuration Done or not
    2) Execute the workflow in SWUS and check it
    3) If it working, test the workflow it via T.code SWUE, If not working then workflow is deactivated
    4) You have to move the Workbench Transport Request first,  then you have to Move customizing Transport Request.
    Regards,
    Surjith

  • PO release strategy workflow based on plant

    Hi Gurus,
    I am setting up PO release strategy workflow.  We have purchasing at plant level.  Fg. plant 1234's PO should be sent to the plant 1234's purchasing dept.  Plant 5678's PO should be sent to the plant 5678's purchasing dept.  In PR release strategy workflow config. screen, there is a plant field.  However, plant field is not showing in the PO release strategy workflow screen.  they are both in the table T16FW, and plant field is define in the table.  Pls help and explain how we can get plant field in the PO release strategy workflow config.  Or if this is what SAP design, then is there any other way to accomplish what we want?  Thanks a lot!

    We have one requirement where PO Release should trigger if amout of PO is greator then PR value. Let me know how this can be achived as I understand that both have different communication structure like CEKKO & CEBAN.
    Hi,
    You can try doing it with a WorkFlow as you identified communication structures differ.
    Regards
    Shiva

  • PO Release strategy workflow configuration

    Hi All,
    I am doing PO release strategy workflow configuration in PFTC, Please tell me in this which all configurations come in workbench transport request and which all come in automatic transport request.
    Please guide me
    Thanks in advance
    Pavan

    The PR WS00000038 standard Workflow is very simple, you don't have to create a new one, it works, the think is that you need to make some configs in the SPRO
    spro
    Material Management/Purchaising/Purchase Requisition/ Release Procedure / Procedure With Clasification / Set up procedure with classification/ Workflow
    In this config you need to add the: Release Group / release code / object type( US for user id's) / and the User. You have to add one line for each release code that you configured in your release strategies.
    After that you have to review the linkage table Tcode: SWETYPV, find the object type BUS2105 and activate the linkage for the event releaseStepCreated, in this you will see the WS00000038.
    Now you can start to testing the notifications in the inbox(SBWP) for the configured users using the me51 tcode.

  • Changing Release Stratergy will affect the current PO approval flow

    Hi Friends,
    I have set the release Stratergy for PO and now I have to change the release stratergy, in this case will I face any issue for the previous PO which is the flow of approval.
    Thanks.
    Dhan

    Go through: SPRO-Material ManagementPurchase OrderRelease procedure for PODefine release procedure for PORelease Indicator.
    In this you will have changeability field, here you have different strategy for changes in release strategy for mapping of the new strategy,value change, etc...
    Please also check the Release Strategies where in, which final release ID is mapped.
    This will gives you idea about what will be possibility for mapping of new release strategy..
    Hope it will help you.
    Regards
    Vikrant

  • Trouble shooting Purchase requstion Release stratergy with classification

    Hi,
    I am trying tos Set up a release startergy for Purchase requistion items with classification
    I am trying to capture Requestions with the following characteristics.
    Purchasing document type (ref to CEBAN -BSART)
    Total Item Value (ref to CEBAN-GSWRT)
    Purchasing group (ref to CEBAN-EKGRP)
    I have set up the release stratergy. However when I create a requisition with the criteria matching the release stratergy the PO does not get activated.
    I want to see what Charactersitics my PR has at runtime so that I can try to reslove the issue.Does anyone know of a transaction or report I can check to see what charatersitics my PR picks at runtime?
    Thanks,
    Ishan.

    Hi,
    Go into trx CL30N and enter the values of the document :
    1.If you don't get a result> check in customizing definition of release strategy and check
    In trx OLME > PR > define document type 
    "Overall release of purchase requisitions" flag ( fiield V_T161-GSFRG ) should not be SET
    In TRX OLME > OR > release staregy > Release Groups
    also FRGFG should not be set
    2. If you get one result> check
    If  you have activated the userexit 'EXIT_SAPLEBND_001'
    (Include ZXM06U13) This exit is relevant for the individual release.
    If you activating the userexit, please ensure that you implement
    the coding line E_CEBAN = I_CEBAN. in the include or deactivate the
    exit. Please refer to point 3) of the note 365604.
    BR
    Nadia Olrandi

Maybe you are looking for