PR Release Stretegy-Authorization Problem

Dear All,
In PR Release stretegy we have three level A1,A2 and A3.
Our requirement is if PR release by A1 after that only A1,A2 or A3 can change PR. No other users can change PR
In our case After releasing full PR i.e. upto A3, user cannot change PR. But if PR release by A1 and A2, user can change the PR.
Is thos problem related to config?
Thanks in advance,
Nirav

As per standard settings your requirement is not possible

Similar Messages

PR-Release Stretegy

Hi!
While creating the release strretegy of PR and during creation of release group with class.
the system prompt the following message & cann't save.
" Please check release classes (see long text)
Message no. ME492
Diagnosis
Here you can assign release groups to release classes. Only one release class should be used within the release groups for overall release and the release groups without overall release in each case. However, in this instance several release classes have been used.
Procedure
Assign the release groups that were created for overall release to one release class only. Assign the release groups that were not created for overall release to a different release class.
Example:
Rel. group Rel. obj. Overall rel.    Class       Description
01 1 _   FRG_EBAN      Group 01
02 1 _   FRG_EBAN      Group 02
S1 1 X   FRG_GF_EBAN Group S1
S2 1 X   FRG_GF_EBAN Group S2 "
Please guide me how to rectify the above mentioned problem.
Also assist me, for creation of PR release stretegy!
Thanks

Hi,
We have also faced the same problem a week before. To come out of this problem, we have deleted all earlier "Release Group" settings. B.coz, system recognize one "class" only.
One class can be assigned to many "release groups".
But if you enter two different "Class"es sytem will throw this error message.
Since it will affect client level settings, for practice don't keep your settings permanently.
Thanks.
Karthik Params

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

How I fixed my authorization problem

There have been many posts on the authorization problem that has cropped up since the latest update of iTunes, and there doesn't seem to be universal cure. I fought it myself for a couple of weeks, and recently fixed it on my PowerBook and thought I would share it with others.
The common theme here seems to be that it affects people who have had more than one account in iTunes. For the record, I have NEVER purchased music from the iTMS using a different account, so I was confused as to why this was happening to me.
I have two Macs in play here: an older eMac at home and a PowerBook G4. My initial iTunes library started on the eMac, and then I moved it to my PowerBook a little over a year ago when I bought it. I purchased music from the iTMS on both Macs, using the exact same account.
When I upgraded iTunes on my PowerBook, I reauthorized using my only account, and the music that I had purchased since I transfered my library worked just fine. The music that I had purchased on my eMac simply would not authorize!
It dawned on me yesterday that I setup a .mac account on my PowerBook several months ago, although I never used it in the iTMS and I never used it on the eMac at home. I also realized that I had NOT run iTunes on the eMac since the most recent upgrade.
I installed the iTunes upgrade on my eMac, and proceeded to authorize it with my only known iTMS account. No issues, and all purchased music was auhtorized, including songs that would not play on my PowerBook.
On my PowerBook, I decided to authorize using my .mac username and password, even though I have NEVER used it to purchase music. I didn't even own that account when the music files in question were purchased. As I suspected though, the authorization went through and I can now play all of my purchased music from iTMS.
When I try to step through this logically, it makes my head hurt. There is definitely a major problem with Apple's DRM authorization relationship somewhere, as there should be no reason at ALL for any of my music to require my .mac account.
I don't know if this will help anyone, but if you're struggling with it and you have a .mac account, give it a shot and it might work.

The fact that you saw no glitches while running Logic before applying the update means almost nothing because that uses only a small subset of system resources. Far more significant is that Safe Mode restored some missing functionality: because it disables non-essential items like user fonts, third party drivers, & so on, it points to problems in those areas.
Equally significant, the fact that there are relatively few reports of post-update problems among the several million Snow Leopard users points away from the update itself as the cause of your problems.
Separate & apart from that, it so happens that I'm a sound engineer/system designer/board operator with nearly 40 years of professional touring experience. FWIW, I never have & never will update the software of any system I must rely on professionally (whether it is running on a Mac, a PC, or dedicated hardware) unless & until I can thoroughly test it first and I have a trustworthy backup/recursion strategy to fall back on in case of problems.
I strongly suggest you learn from your unpleasant experience & do the same. I have had far fewer problems with Macs than with PC's, but nothing is 100% reliable to begin with. Changing the OS software part way through the tour is just asking for trouble, no matter how reliable that has been in the past. Even if the budget allows for nothing better than a stack of burned CD's & a couple of consumer grade CD players, no professional tour can afford to be without some fallback strategy in place. That should be self-evident & require no warning from Apple or anybody else.

Authorization problem when using the Transaction Launcher

Hi All,
We have an authorization problem when we call a transaction (EL37) in ECC from the IC Web Client.
We believe that we have done all the necessary customizing in CRM and when we press the link in the Navigation Bar we are asked to logon to our ECC system. After logging on, we get an error message saying that "You do not have authorization for transaction EL37". If I then enter the transaction directly in the white command field in top of the ECC screen, then I have no problem calling the transaction.
My user has SAP_ALL, so it shouldn't be a problem with the authorizations. Maybe it has something to do with the transaction IC_LTXE? I have also tried to add this transaction to my user profile, but that didn't help.
Does anyone have a suggestion for how to fix this problem?
Kind Regards,
Gitte.

Hi,
I have found the solution for the problem myself. The transation code in the Transation Launcher Wizard must be written in capitals! We had entered 'el37' and have now changed it to 'EL37'.
Best Regards,
Gitte.

How to deal authorization problem in KE30

Hi to all
Please tell me how to deal authorization problem in KE30.
My requirement is to restrict report based on sales office so that other region's emplyee can't be able to see different regions sales data.
Please guide me on this issue.
Thanks & Regards
Anubhav

closed.

ATV2 "authorization" problem

So, I purchased an ATV2 at Heathrpw airport before I left UK as well as a cheap (£14.95) HDMI cable.
I wanted to use the ATV2 in my home in Switzerland and purchased a Sony Bravia TV to watch it on.
1. My first problem, when streaming content from my iTunes is that the ATV2 sometimes gets "disconnected" from the television, i.e. I see the blnk HDMI1 screen for a split second, then it reconnects.
2. Second problem is that after about 15 minutes of watching anything on my ATV2, the picture turns to a combination of pink and blue, the picture is still visible but i have never seens anything like this.
3. third and most annoying problem: I rented a movie directly from ATV2 last night (with my UK iTunes account), paid for it, and when it pops up on the screen saying it is ready to be watched, I pressed play but it loads, then authorizes and then a message appears that "this device is not authorized to play this content".
I thought that perhaps this was one movie, so I rented a second one. When that didnt work, I figured it may be because I am in Switzerland and using a UK iTunes account, so I logged into my swiss one and rented something else. To no avail!
*Things I have done to try and fix the problems*
1. I have authorized and de-authorized my computer
2. I have reset the ATV2 to its factory settings
3. I have tried Swiss as well as UK iTunes accounts to rent movies
This is increedibly frustrating and I hope someone can help! Thank you in advance!

I too got an ATV 2 very recently. From my iMac I can order movies and watch them (as well as music, etc.). From my MacBook Pro I can do all except stream movies. Every time I try something new on the MacBook Pro (I keep buying the same two movies, so "they" know I am sincere), I get authorization problems.
1. REMOTE: I can preview but not watch ATV 2 movies using the remote: "your apple tv is not authorized to play this content."
2. MACBOOK PRO: I cannot use my macbook pro itunes to order and watch movies (music yes, movies no): "Authorization is required..." even though I have authorized/reauthorized the laptop 10 times. And I have reset/restored ATV 2.
3. IMAC: I can use my iMac itunes to order movies. I then choose that computer on the ATV 2 screen and movies stream.

Extended Notification authorization problem

Hi All,
We configured extended notification for all the workflow in ECC 6.0.
We have been moved to production system. When users selecting the workitem link in the outlook, they are getting an authorization problem saying that 'You don't have an authorization to execute SWNWIEX'.
However, with this transaction the user can execute the ANY workitem just by entering the Work item id. The transaction does not check if the work item is actually in the users inbox, I would think this could be a security issue.
could you anyone please help me out.
-Steve

Hello,
I don't think giving access to tx SWNWIEX allows all users access to all workitems.
Where did you read that? It could be the case for your account, but not everybody's.
Test it out.
regards
Rick Bakker
Hanabi Technology

Release stretegy for service PO

Hi gurus,
please help in one isssue, client is having release stretegy for service PO which is applicable for for only P.Gr 1 and 2, this is having three stage release stretegy. He want other pur. groups to be included in release stretegy and it should be two stage release strategy. please help how I can do it
regards
vikrant

Hi Vikrant,
follow the path
IMG>Material Management>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>Set Up Procedure with Classification-->Release Strategies
Here define the new release strategy,
Give the required Release codes, i.e 2 levels of approvals
Goto "Release Pre-requisits",
Define "release statuses",
Then SAVE it,
then go to "classifications", and give all the parameters same as tye other release strategy but that of EKGRP (Purchasing Grp) give the new purchase grp.
But make sure that your CLASS contains the Purchase Grp as one of the Characterstics.
and hence forth when ever you will make a PO with with any of these Pur Grp then the new release strategy can trigger.
Hope It will Help you further.
Regards,
Yawar Khan

BI Authorization problem query in web

Hello Guru,
i have authorization problems to execute query on the Web.
When i try to execute query on web i have these messages:
- Missing display authorization msg R9 108
- Missing authorization to execute query msg R9 108
- User doesn't have authorization for selected component
Component selected can not be executed
Contact person responsible for the authorizations if user need authorization to execute this component
Function is checked with object "Business explorer - components" with these fields:
    - InfoCube ZSD_007
    - Component type ERP
    - Component ZTEST_SD_007
    - Activity 16
Message number BRAIN 800
In BI i have add to my usere all these profiles and role, but the problem still again:
Profiles:
SAP_ALL
S_A.SYSTEM               System administrator (Superuser)
S_RS_ADMWB_A        All Administrator Workbench Authorizations
S_RS_EXPL_A             All Business Explorer Authorizations
T-BS590005                  Profile for role Z_RS_RREPU
T-BS590006                  Profile for role Z_RS_RREDE
Roles:
SAP_BW_CFO_ADMIN
Z_RS_RREDE   (copy from template RS_RREDE)
Z_RS_RREPU   (copy from template RS_RREPU)
I can not understand if this problem is related to BI authorization or maybe something in Netweaver
please help me
Kind regards
Boris

Hello,
i can execute query from transaction RSRT, anyway also from this transaction when select "ABAP WEB" , web page is open but i have same authorizations problem.
In transaction SU53 seems everithing correct (i have all authorizations) .... this is probably becouse my problem is in Portal or netweaver side and not in BI ???
any suggestion?
Thanks in advance
Boris

URGENT: Authorization Problem with SolMan 4.0

Hi all,
I'm still configuring the SolMan 4.0 . I did all the basic customizing but still have an authorization problem. If I want to create a new support message and want to choose the System/IBase, i get the message "no authorization". And the "KeyUser"-User or "FirstLevelSupport"-User even cannot open the transaction "notif_create".
I tried randomly some roles without any proper results:
SAP_OP_DSWP
SAP_RMMAIN_EXE
SAP_SCDT_ALL
SAP_SCDT_DIS
SAP_SCIDM_ALL
SAP_SCIDM_DIS
SAP_SCOUT_ALL
SAP_SETUP_DSWP
SAP_SMSY_ALL
SAP_SMSY_DIS
SAP_SOL_AC_COMP
SAP_SOL_KW_ALL
SAP_SOL_PM_COMP
SAP_SOL_PROJ_ADMIN_ALL
SAP_SOL_PROJ_ADMIN_DIS
SAP_SOL_SERVTRANS_CREATE
SAP_SOL_TRAINING_EDIT
SAP_SOL_TRANSPORT_DIS
SAP_SOL_TRANSPORT_EXE
SAP_SOLAR01_ALL
SAP_SOLAR02_ALL
SAP_STWB_2_ALL
SAP_STWB_INFO_ALL
SAP_STWB_SET_ALL
SAP_STWB_WORK_ALL
SAP_SUPPCF_ADMIN
SAP_SUPPCF_PROCESS
SAP_SUPPDESK_ADMIN
SAP_SUPPDESK_PROCESS
SAP_SV_FDB_NOTIF_BC_PROCESS
SAP_SV_SOLUTION_MANAGER
The "KeyUser" has the Roles:
SAP_SUPPCF_CREATE
SAP_SUPPDESK_CREATE
The "Processor" has the roles:
SAP_SUPPCF_PROCESS
SAP_SUPPDESK_PROCESS
Has anyone an idea??
Best Regards
Philipp

Hi Phillipp,
did you do the step 1.4 from service.sap.com/solutionmanager media library technical papers Service Desk: Additional Information ? You have to create the ibase ....
Lando
P>S> Don't forget the points if this answer is hepfull

Release stretegy is not applicable for changability 4

Dear All,
For POs We are using release stretegy with changebility 4 such that any change in price in existing released PO will cause the new release strategy applicable,
In our case it is working fine also but only if change in net price, we sometime chang price affecting the effective price but not the net price,
so can you please guide me for how we can make the new release stretegy get activated even for change in effective price or changes in price which are after net price calculation,
Regards,
Sdn Brower

Hi,
New release will be triigerd either if there is a value change or if there is new strategy determined.
Since change in effective price doesnt change the PO net value, Looking into the CEKKO structure
the paramter that you could use can ve REVNO, which is nothing but PO version number.
For this to work, activate verision for the PO and include versioning into characteristics of the release startegy.
Pls test in your sandbox if it works.
If there is any other better solution, pls do share.
Harish

Authorization Problem (I am Using Authorization For Custom Forms)

Hi All,
I am Using Authorizations To My Forms (I created One Addon For This Addon I am Using Authorization).I created Authorization For My Addon But While Working It Showing Some Errors
. In My Addon Four Forms are there For this four forms I am Using Authorization based on usres some screens only super user can access. normal user he is not a super user he cliekd on that authorization form it shows one message Your not a authorized user to permitted this operation in this message box we have two butons one is ok button and one is Authorized by another user . When i clicked on Ok Button I am getting error Internal error (-10) occured [131-183]. Please give me Your Valable Suggestion.
I am waiting for your Reply.
Thanks & Regards
Naresh

I am using Sap Authorizations For My Custom Form See The Code Also U Can Get Clear Idea
Private Sub CustomAuthorization()
        Dim li_RetVal As Integer
        Dim pUserPer As SAPbobsCOM.UserPermissionTree
        Try
            pUserPer = Me.SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserPermissionTree)
            'Purchase Indent
            If pUserPer.GetByKey("NHCL_PM") = False Then
                pUserPer.PermissionID = "NHCL_PM"
                pUserPer.Name = "Purchase Module"
                pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
                li_RetVal = pUserPer.Add()
            End If
            'Purchase Indent ->New Purchase Indent
            If pUserPer.GetByKey("NHCL_PM_NPI") = False Then
                pUserPer.PermissionID = "NHCL_PM_NPI"
                pUserPer.Name = "New Purchase Indent"
                pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
                pUserPer.ParentID = "NHCL_PM"
                pUserPer.UserPermissionForms.FormType = "2000010002"
                li_RetVal = pUserPer.Add()
            End If
            'Purchase Indent->View For Approval
            If pUserPer.GetByKey("NHCL_PM_VIE") = False Then
                pUserPer.PermissionID = "NHCL_PM_VIE"
                pUserPer.Name = "View For Approval"
                pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
                pUserPer.ParentID = "NHCL_PM"
                pUserPer.UserPermissionForms.FormType = "2000010003"
                li_RetVal = pUserPer.Add()
            End If
            'Purchase Indent ->Selection For RFQ
            If pUserPer.GetByKey("NHCL_PM_SEC") = False Then
                pUserPer.PermissionID = "NHCL_PM_SEC"
                pUserPer.Name = "Selection For RFQ"
                pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
                pUserPer.ParentID = "NHCL_PM"
                pUserPer.UserPermissionForms.FormType = "2000010006"
                li_RetVal = pUserPer.Add()
            End If
            'Purchase Indent ->Purchase Quotation
            If pUserPer.GetByKey("NHCL_PM_PUR") = False Then
                pUserPer.PermissionID = "NHCL_PM_PUR"
                pUserPer.Name = "Purchase Quotation"
                pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
                pUserPer.ParentID = "NHCL_PM"
                pUserPer.UserPermissionForms.FormType = "2000010007"
                li_RetVal = pUserPer.Add()
            End If
            'Purchase Indent ->Final Quotation
            If pUserPer.GetByKey("NHCL_PM_FIN") = False Then
                pUserPer.PermissionID = "NHCL_PM_FIN"
                pUserPer.Name = "Final Quotation"
                pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
                pUserPer.ParentID = "NHCL_PM"
                pUserPer.UserPermissionForms.FormType = "2000010008"
                li_RetVal = pUserPer.Add()
            End If
        Catch ex As Exception
            Dim ErrCode As Long
            Dim ErrMsg As String
            Me.SBO_Company.GetLastError(ErrCode, ErrMsg)
            Me.SBO_Application.StatusBar.SetText("Authorization Problem" & ErrCode & li_RetVal, SAPbouiCOM.BoMessageTime.bmt_Short)
        End Try
    End Sub

Authorization problem

Hi experts,
I have the following authorization problem:
I have a role containing authorization for company code. The role contains several queries.
Some of the queries contain authorization variable of company code but some are not restricted by any authorization.
When I run the queries that are not restricted by authorizations I get an error: User is not authorized
from RESCADMIN:
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
182 ( 0COMP_CODE )
267 ( 0COMP_CODE__Z_EBUKR )
Thanks,
Hagit

Dear Hagit,
Iu2019m going to try helping you regarding your question,
Before give you some suggestion. I would like to check with you some item,
The first is the authorization structure. The main authorization structure includes:
Characteristics and Attribute Navigational are relevant authorization, as 0COMP_CODE.
Roles, where are included authorization object to execute queries as S_RS_COMP, S_RS_COMP1, S_RFC and S_TCODE. In field of S_RS_COMP and S_RS_COMP1 is very important include the right technical name of the queries. Furthermore, add the S_RS_AUTH authorization object to join an analysis authorization.
Analysis Authorization, where are included each characteristic and attribute navigational relevant authorization with specific value, as: u201C*u201D full access, u201C:u201D aggregate value, single value, range value or node of hierarchy.
Query, where are include in some cases the characteristic relevant authorization with its variable authorization.
InfoProvider, where are contain characteristic an attribute navigational relevant authorization.
Regarding your Error:
from RESCADMIN:
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
182 ( 0COMP_CODE )
267 ( 0COMP_CODE__Z_EBUKR )
I suggest you, to try the following action:
Query, in some queries where you havenu2019t included the characteristic 0COMP_CODE in the row. Put in the default value the characteristic 0COMP_CODE with its variable authorization, not ready for entry and optional.
Analysis authorization, you should add all of characteristic and attribute navigational relevant authorization available in the InfoProvider. Must be matching characteristic and navigational attribute relevant authorization, between analysis authorization and InfoProvider.
Try to include in your analysis authorization the u201C:u201D value.
Furthermore, try you execute tcode RSUDO, then RSECPROT you can get more information about your authorization system behavior. The first transaction is to execute a query with other user (select u201Cwith error logu201D), and the second is to display the error log.
I hope these comments can help you,
Luis

Profit center and comapny code missing authorization problem.

Could you help any body,i have some missing authorization problem with profit center and company code,
How to search the roles which having require profit and company code values.
Is there any way to search.
Please let us know very fast.
Thanks in advance

Another, and probably much easier way, is just to use Ctrl + Y... and use subsets of the selections in the SUIM reports.
But I can well understand the temptation to use tables or at least double-check the SUIM output against them.
The bugger with tables is that you can easy make the same mistakes or more than the SUIM reports do, or use old obsolete tables, or incorrect logic when interpreting single fields of the user tables.
Personally, I would normally check the exits first. Developers don't always raise self-explanatory messages...
Cheers,
Julius

PR Release Stretegy-Authorization Problem

Similar Messages

Maybe you are looking for