PR should allow to change after the PO

Hello
Creating the Purchase order with ref to PR, Once the PO is created with ref to PR with full qty then system should not allow to change the PR.
How to made this?
Regards
sapman man

Hi,
My Requirement is.....PO is created with ref to PR, then that perticular PR should allow to edit in ME52N .
it should allow only after the PO deletion, then system should allow to change that perticular PR
How do this?
sapman man

Similar Messages

Production Order Usage Probability should not be allowed to change after GI

Dear Gurus,
pls tell me how to do this ,Production Order Usage Probability should not be allowed to change after Goods Issue (GI) done against Prod Order . pls tell me procedure or any UserEXit for this.
Thanks in Advance,
Regards,
Dev

Hi,
Can you elaborate little bit more?
Regards,
Sankaran

Profile update should allow for change of email address

Dear sirs,
Member profile update should allow for change of email address otherwise one has to unsubscribe their old email address and re-subscribe the new one.
Please make it happen.

I worked out the answer to my own question.
1. Logged into my Apple ID
2. Editited my Apple ID email address (old) and changed it to my @me.com address (ignored the red warning about Apple ID must not use a domain owned by Apple) and pressed the blue Save Changes button anyway at the bottom of the page.
This created a new Primary Email Address with the @me.com (which needed to be verified etc.)
The Primary Email Address can now also be changed to my @icloud.com address if I wish (which also needs to be verified.
I would now like to be able to use the option to 'Make my Apple ID and Prmary email address one and the same'. So I can finally get rid of my old e-mail address as my Apple ID. It can give me the option to change it to my @icloud.com address, but when I press submit, it does not do anything. This feature does not seem to work yet. I suppose that is another question / request.

PO- Why PO still allow to change after Delivery Completed has ticked.

Dear All,
I'm doing functional testing for MM, but i realised that the PO still allow to change after delivery completed has ticked.
Can i know if there is a way to restrict any change after any good receiving or delivery completed?
Thank you very much,
Regards,
Chee Wee

Hi,
Here we have same problem that after tick GR completed system allow to take further receipt though PO is not open.
we communicate with SAP and there is no function available to close the po for receipt until you reduce PO qty for GRN Qty or loca / delete line item.
We had write user exit to check tick in PO for GRN allow or not and that give error message.
You can do same for GRN.
Regards,
Chetan Mistry

HT1316 How do i find the pin code change after the latest update?

How do i find the pin code change after the latest update? The IOS changed the order of things now

There are two things you should be talking about here. If its the Passcode, then this article may help you. (Pretty much restore your device) http://support.apple.com/kb/ht1212 If it's asking for a SIM PIN, then thats covered here. http://support.apple.com/kb/ht1316 Hope this helps!

I have moved from the US to Norway, and want to change my apple ID to the Norwegian appstore. However, I am not allowed ot change from the US store before I use up my balance, which is 0.17 dollar. The problem is that nothing costs 0.17 dollar.Please help

I have moved from the US to Norway, and want to change my apple ID to the Norwegian appstore. However, I am not allowed ot change from the US store before I use up my balance, which is 0.17 dollar. The problem is that nothing costs 0.17 dollar and I do no longer have an american visa card, only Norwegian. Is there any way I can erase the credit on my account so I can change the appstore country? Or osmething I can use this credit on? Thank you very much

Try contacting the store support staff at: http://www.apple.com/emea/support/itunes/contact.html they are usually pretty good at sorting out these issues.

USER EXIT/ BADI (The price should not be changed in the billing document)

Hi all,
We have given manual entry provision for pricing in Sales order level. But as per the company requirement, the price should not be changed in the billing document. Also the point to be considered is, it is a delivery based billing.
Kindly help me for finding USER EXIT/ BADI to achieve my requirement.
Thanks.

Hi,
Please refer to OSS notes:
105621 - Authorization check for the condition screen - you can use following user-exit includes for changing the condition tab to display only:
    USEREXIT_FIELD_MODIFICATION
    USEREXIT_PRICING_CHECK
    USEREXIT_FIELD_MODIFIC_LEER
    USEREXIT_FIELD_MODIFIC_KZWI
    USEREXIT_FIELD_MODIFIC_KOPF
1165078 - Authorization check for conditions or subtotals - from ECC6.0 EHP4 there is a dedicated BAdI for authorization check, however if the user is not aurhorized to change the conditions, the conditions are not visible for the user as well.
Regards,
Marcin

Need By Date Should be equal or after the effective start date- error in po_requisitions_interface_all

Hi All,
We have created a manual planned order for one buy item in ASCP workbench for some qty and released it.
But, we are not able to get its requisition created in source.
When we check the PO_Interface _Errors table, we found that it is errored out with error as --
Need By Date Should be equal or after the effective start date .
Can anyone please help me out to find the cause of this issue. Any help/pointer in this regard will be highly appreciated.
Thanks,
Avinash

Hi Abhishek,
We found the root cause of the issue.
Its BPA was not having any Effective start date mentioned in its terms. So we put it as BPA creation date and ran the data collection and plan run.
After that we were able to see its BPA release created without any error.
Thanks,
Avinash

I want to download apps on another laptop but it says download trial, this is putting me off as i don't want 2 DD, unless it changes after the download?

i want to download apps on another laptop but it says download trial, this is putting me off as i don't want 2 DD, unless it changes after the download?

Elaine_123 please make sure that you are signed into the Creative Cloud Desktop application utilizing the Adobe ID tied to your Membership. If you have done this then please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html to resolve the connection error preventing your membership from being validated.

Excise amounts should not be changed after IEI

Once Incoming excise invoice is completed, one should not be allowed to change excise amounts in the A/P Invoice. This creates to a lot of problems. This posts different amounts in the cenvat clearing amount at the time of IEI and then at the time of A/P Invoice, thus creating reconciliation problems...

done using query...

Baseline date change after the creation of invoice list

When I create invoice document, the invoice date (vbrk-fkdat) is the end of the month and the invoice list date (VBRK-FKDAT_RL) is the next business day after the invoice date, the baseline date of the accounting document (bseg-zfbdt) is the document creation date and this is what I wanted.
However, when I start to create the invoice list, the baseline date on the accounting document (field bseg-ZFBDT) is changed to the invoice list date. Does anyone know why and how to fix and where to look in the configuration to see how invoice list date (vbrk-fkdat_rl) is populated? It seems to me that the baseline date default back to the invoice list date when invoice list document is created. Thanks for your help. I also posted this question in the ERP Financial thread.

Hi Valerie,
do you recall the User Exit?
Thanks

How do I Change the Name of My MacBook and Why was it Changed after the Upgrade to Yosemite?

Hi everyone,
I upgraded my MacBook Air (2012) to Yosemite a few months back and it changed the name of my Mac from "Alan's MacBook" to "Alan MacBook Air (2)." I simply want to know how to change it back to the original name. Also, why was it changed in the first place after my upgrade to Yosemite?
Thank you so much!!!
Alan

Professor AR wrote:
Also, why was it changed in the first place after my upgrade to Yosemite?
This was a common bug in Yosemite. Follow dwb's instructions but also restart your router. Make sure you're running OS X 10.10.2 since it was supposed to have been addressed with that update.
I have heard allegations regarding simultaneous use of both Wi-Fi and Ethernet (or equivalent adapter, considering it's a MBA) but can find no justification for them, and I never personally observed any correlation to it. It's perfectly acceptable to use both.

Naming convension getting changed after the PI7.1 upgrade

Hi all,
After the upgradation from PI7 to PI7.1, IR/ID objects naming convention got changed.could you let me know how to get the actual names of IR/ID objects.
Thanks,
Srinivasa

Are you looking for the Naming COnvention document for SAP PI7.1? If yes, then refer below link:
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/40a66d0e-fe5e-2c10-8a85-e418b59ab36a&overridelayout=true
Regards,
Abhishek.

My N95 region was changed after the NSU Upgrade

Hi folks
I used to have this N95 configuration Nokia N95 v10.0.0.18 15-03-07 RM-159 (05.01). Note that I had Bulgarian language in the languages. After the update I have V 11.0.0.26 17-04-07 RM-159 Nokia N95 (66.01) and no more Bulgarian ?!?!?
Any idea how to fix this
Lumia 920 OS version: 8.0.10521.155
FW revision number: 3047.0000.1326.2002

m8,
i think that's an updater issue! this is what happened to me, i download the software updater from Ireland, & then try to upgrade my N91-2 firmware it says there's no upgrade yet for my phone though i knew there was! what i did was to download the updater from southeast asian region(i bought the phone in HK during my travel there)& run it, voila i do have an upgrade & upgrade my phone firmware. it took more than an hour on a 128k dsl line!
since English language always on any region i guess i have no problem but there is support for other east asian language which i don't care!
this is a long shot, try to download a new software updater from your region, & give it a second go.Message Edited by android on 14-May-200709:03 AM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Unable to see any changes after the preview download

Hi Team,
I have registered as developer and downloaded the preview today. But i cant see any changes in the features. Am i missing something here ?
Regards,
Santosh

We have moved our support forum for OS Consumer Support, i.e. almost any support of the Preview for Developer release that is not related to developing an application, to the Microsoft Community website here:
http://answers.microsoft.com/en-us/winphone/forum/wp8
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.

PR should allow to change after the PO

Similar Messages

Maybe you are looking for