PR status incorrect for POs craeted via PUR_ORDER_CREATE_VIA_SD_EVNT functi

We use the ALE process to create Purchase Orders automaticaly from Sales orders.
The standard function module assigned to the Business Object BUS2032 in SWETYPV for ALECREATE is PUR_ORDER_CREATE_VIA_SD_EVNT
SAP creates a PR and then converts it into a PO using this functional module. However, the procurement status does not get updated on the PR and the PR still shows as open.
Is there any standard correction report to update the status on these PRs or any OSS note that addresses this issue?
Thanks in advance for your replies.

Dear Vinay,
Please check the FM which automatically creates the P.O. whether it has any parameter for PR status, if it is there, then make sure you pass the required value if the same is not there and it is a standard FM then raise a SAP message.
Hope this helps!
Thank you,
Reetesh

Similar Messages

  • Dbconsole - emctl agent status - incorrect for 'emctl resetTZ agent'

    When I run - emctl resetTZ agent
    ...Agent is running. Stop the agent and rerun the command.
    When I run - emctl stop agent
    ... Agent is not running.
    When I run - emctl status agent
    ... Agent is Not Running
    The agent is not running but "emctl resetTZ agent" thinks the agent is.
    How do I fix this issue?
    I'm using Oracle 10.2.0.4 on AIX 6.1

    These are the processes for ps -ef|grep -i agent. None of them are for Oracle.
    srddb01:orasrd 2> ps -ef|grep -i agent
    root 176230 172258 0 Oct 11 - 0:00 /opt/freeware/cimom/pegasus/bin/cimssys platform_agent
    root 286940 299212 0 Oct 11 - 213:45 /var/opt/tivoli/ep/_jvm/jre/bin/java -Xmx384m -Xminf0.01 -Xmaxf0.4 -Xbootclasspath/a:/var/opt/tivoli/ep/runtime/core/rcp/eclipse/plugins/com.ibm.rcp.base_6.1.2.200801281200/rcpbootcp.jar:/var/opt/tivoli/ep/lib/icl.jar:/var/opt/tivoli/ep/lib/jaas2zos.jar:/var/opt/tivoli/ep/lib/jaasmodule.jar:/var/opt/tivoli/ep/lib/lwinative.jar:/var/opt/tivoli/ep/lib/lwirolemap.jar:/var/opt/tivoli/ep/lib/passutils.jar:../../runtime/agent/lib/cas-bootcp.jar -Xverify:none -cp eclipse/launch.jar:eclipse/startup.jar:/var/opt/tivoli/ep/runtime/core/rcp/eclipse/plugins/com.ibm.rcp.base_6.1.2.200801281200/launcher.jar com.ibm.lwi.LaunchLWI
    orasrd 426000 1028282 1 14:28:09 pts/0 0:00 grep -i agent
    root 430290 172258 0 Oct 11 - 4:33 /usr/sbin/rsct/bin/vac8/IBM.CSMAgentRMd
    srddb01:orasrd 3> ps -ef|grep -i agent
    root 176230 172258 0 Oct 11 - 0:00 /opt/freeware/cimom/pegasus/bin/cimssys platform_agent
    root 286940 299212 0 Oct 11 - 213:45 /var/opt/tivoli/ep/_jvm/jre/bin/java -Xmx384m -Xminf0.01 -Xmaxf0.4 -Xbootclasspath/a:/var/opt/tivoli/ep/runtime/core/rcp/eclipse/plugins/com.ibm.rcp.base_6.1.2.200801281200/rcpbootcp.jar:/var/opt/tivoli/ep/lib/icl.jar:/var/opt/tivoli/ep/lib/jaas2zos.jar:/var/opt/tivoli/ep/lib/jaasmodule.jar:/var/opt/tivoli/ep/lib/lwinative.jar:/var/opt/tivoli/ep/lib/lwirolemap.jar:/var/opt/tivoli/ep/lib/passutils.jar:../../runtime/agent/lib/cas-bootcp.jar -Xverify:none -cp eclipse/launch.jar:eclipse/startup.jar:/var/opt/tivoli/ep/runtime/core/rcp/eclipse/plugins/com.ibm.rcp.base_6.1.2.200801281200/launcher.jar com.ibm.lwi.LaunchLWI
    root 430290 172258 0 Oct 11 - 4:33 /usr/sbin/rsct/bin/vac8/IBM.CSMAgentRMd

  • Source location incorrect for POs in /SAPAPO/VS01

    Our POs have the following partner functions:
    PI    Invoicing Party
    GS Goods supplier
    VN Vendor
    Right now the source location shows VN.But since goods ship from GS and not from VN , the source location must show GS in transaction /SAPAPO/VS01.
    Do you know how I coould achieve this?
    Thanks,
    Satish

    Satish
    We were also working on a similar requirement , but got stuck because we were not able to bring over the vendor partner functions from R/3 to APO. Actually when you maintain partner functions in a vendor location and CIF it over to APO you would expect the partner function details to appear in the location master in APO. But that does not happen . Not sure why.
    Also one more thing i noticed is that there is a field called vendor subrange in the vendor - location transportaion lane , but then that also does not get populated. May be an OSS message is required to solve the problem
    Please keep me updated about the solution you get.
    Thanks
    Saradha

  • GR  via MIGO allowed for POs with conf control key

    GR  via MIGO allowed for POs with conf control key.
    where GRs should be allowed only based on ASN (INB) Del.
    How to restrict GR via MIGO when confirmation control key is set?

    ideally it should work, however check Conformation Control Key LA.
    Confirmation sequence " GR relevant " and GR assignemnt is checked or not, in SPRO > MM> Purchasing --> Confirmations --> Set up confirmation control.

  • Spool status Incorrect

    Hello Everyone
         I have one problem. I have configured PO release in such way that when ever user will release and save  PO , immediate print command will be sent.
        Now i have two transactions ME29n and ME28 to release PO. At backend both transactions use the same program and form to print.
       When i run ME28 , print command is sent immediately and i can see spool completed successfully in SP01.
      When i run ME29n, 1st time i can see a message that PO is changed after save , but when i see spool, spool does not get created.
      When i run ME29n, 2dn time for the same PO, if i go to check message setting and come back to main screen without doing any changes, and press save, spool gets generated and completed successfully.
      I tried to debug both the transactions number of times, then in debug , both transactions ended up in giving me spool  status 'Incorrect'.
    (Don know the reason if this is due to debug or something else )
      So i am not able to understand the reason behind this situation.Assist.
      Thanks

    I am honestly unable to understand what exactly is the question (you need to be more specific, SDN is not a Help Desk). In the subject you're saying "incorrect" but then "can see spool completed successfully in SP01". Which one is true?
    In any case, my guess is that you need to change the output configuration. If it is required to perform two transactions then the output should not be triggered until the second transaction completes. There is also separate configuration for the initial output and output for changes in POs. And, on top of that, in SP01 you should be able to see an explanation what is "incorrect".
    Actually this is not really an ABAP question but the output configuration, so ask your MM/PTP consultant.

  • Status Change for Purchase order in Process Purchase order

    Hi All,
    We have implemented SRM 4.0 with Extended Classic scenario.
    SRM does provide standard status for Process Purchase order worklist (such as Ordered, Held, Error in Process etc.). Is there any BADI i can use to overright my own status message for the PO.
    To give brief background of the requirement. Client wanted status to be changed to "Cancel" For POs whose all the line items we have deleted or "Close" when Last delivery or Final Invoice check is ticked.
    I am aware that i can use BBP_DOC_SAVE_BADI as structure BBP_PDS_ITEM i can get items deletion indicator. But will i able to change the standard Status message?
    Presently even though all line items marked delete still shows PO as "Ordered" status.
    Kindly let me know if i can acheive with anyway.
    Thank you
    Ritesh

    Hi Masa,
    Thank you for your response. I have few doubts about the configuration which you have suggested.
    - Define Status schema for User status will create a status Profile in which i have to include my own status. In the document of Define Status Schema it specifies that After creating User profile you have to assign same profile to transaction types. (I.e. BUS2201 or BUS2121 etc).
    My concern is will my own status profile over-write the standard status which is coming? such as Ordered, Created, Transmission fail etc.
    If so then do i have to create status profile to include all the Standard Status message in it as well?
    - Other thing i found that Ordering PO goes through many standard status message (COMP, CRTD, CTRA, DCOM, ORDR) and always the last status in the Hearder will display on  ITS level. Is my understanding right?
    - I found that there is a standard system status message I1045 (BECN Cancel) Can i use this through BADI?
    Kindly let me know.
    Thank you once again.
    Regards
    Ritesh

  • Message stuck in SXMB_MONI  status " Sceduled for Outbound Process." Urgent

    Hello All,
    All messages in our XI environment are getting stuck with status Scheduled for Outbound Processing ...I have already done the following..
    1) Registered the Queues
    2) Deleted entries in SMQ1 and SMQ2  and restarted messages
    Last time we had this issue, we were finally able to reslove it by doing a J2EE restart.  But this has resurfaced again within a week, and this time even the restart is not working. 
    Do you think some parameter has been set incorrectly during the install ..
    Any help would be appreciated ..
    thanks
    Mayank

    Hey Mayank,
    Did you got JCO failure error for any of XI message before start of getting this error message?
    If so it's failing because of RFC connection problem...
    You need to go to Tcode : SM59 in your xi server
    check the TCP/IP Connections which is created while post-installation phase..
    1. AI_RUNTIME_JCOSERVER.
    2. AI_DIRECTORY_JCOSERVER
    Solution :  Increase the default value for CPIC_MAX_CONV (se note 314530).
    Hope this wull solve your problem.
    Nilesh

  • Using Enterprise service for POS integration to POSDM

    Hi
    I have few question on using Enterprise Service  for POS Inbound .
    1. Is it possibe to get this XML schema for Enterprise Service
    2. Lets say we have to use a third party POS to  integarte POSDM via PI. But then if we don't want to do any transformation in SAP PI,  then can we use the following option:
              SAP POS sends the data in the ES XML format
              SAP PI just transports this to POSDM
    I do see some drawbacks of POS sending the data in  the ES service format. As this means, if any change needs to be done based on any new requirements, we need to change the source code. However the above option should still be technically possible?
    Any reference if the above approach had been used in any projects. We have always used the following flow:
    POS--> PI---> POSDM . PI to POSDM is through the RFC /POSDW/CREATE_TRANSACTIONS_EXT.
    Regards,
    Fazila

    Hi Fazila,
    The ES bundle "PointOfSaleTransactionERPBulkCreateRequest_In" can be used to transfer POS transactions to POS Data Management directly.
    In order to access the above-mentioned ES, please use the Integration Builder in your PI system in transaction SXMB_IFR and follow the link to the Integration Repository.
    This structure can be enhanced to capture additional information.
    Award point if useful.
    Regards,
    Ramki

  • Billing:Rules for posting key 01 and acct 621201 set incorrectly for"XREF3"

    Hi Experts
    At the time of billing i am getting the below error and its not posting into accounting
    Rules for posting key 01 and acct 621201 set incorrectly for "XREF3" field
    Message no. F5272
    Diagnosis
    One of the rules specifies that the field demands a required entry, the other rule says that the field is to be suppressed.
    Procedure
    Correct one of the two rules for the field selection.
    You find the field status group in the G/L account master record:
    Execute function
    You can find the rules for the field status group in the Financial Accounting Implementation Guide in the activity Maintain field status  variants.
    You can find the posting key in the Financial Accounting Implementation Guide in the activity
    Define posting key.
    Regards
    Selvi

    Check this thread
    [Re: Posting to GL   |Re: Posting to GL]
    thanks
    G. Lakshmipathi

  • Status clsd not unique (Selection via input help (F4) only) -COOIS

    Hi all,
    We doing upgradation 4.7E to Ecc 6.O
    In coois , When we enter system status as 'clsd' , system showing error msg
    Status clsd not unique (Selection via input help (F4) only)
    Message no. COIS054
    Why this error occurs.. how to solve this???
    looking for answers..
    Thanks in advance..

    Please read OSS note 1377678.

  • Predecessor has status 'Incorrect'

    Hi,
    When a follow up transaction was being created for an order with errors in CRM, an error is coming "Predecessor has the status 'Incorrect' " in the order.
    We have removed all the errors from the predecessor transaction (Order), but the above error is still not getting removed.
    How can we remove the error from the order?
    Regards.

    Hi Charu,
    Did you fix this message, can you please share your solution,  i have the same message appreaing.
    Many thnaks
    Raj.D

  • Error : Predecessor transaction ID  has the status 'incorrect' .

    Hi Experts,
    We are getting this error when try to create Activity from Account application( from activity tab page in account) in PCUI. But the same thing is working fine in at GUI level & Activity application in PCUI also & actions profile assigned to Activity transaction is also working fine at GUI level & activity application in PCUI.. But in Account application it is throwing this below error.
    Error: The predecessor transaction ID  has the status 'incorrect' .
    Detials of the error:
    Diagnosis
    You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
    System Response
    The follow-up transaction is not created.
    Procedure
    Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
    Pls suggest solution for this.Helpful answers would be rewarded max points.
    Thanks in Advance.
    Regards,
      Charu

    Hi Charu,
    Did you fix this message, can you please share your solution,  i have the same message appreaing.
    Many thnaks
    Raj.D

  • Error : Predecessor transaction has the status 'incorrect'

    Hi Experts,
    We are getting this error when try to create Activity from Account application( from activity tab page in account) in PCUI. But the same thing is working fine in at GUI level & Activity application in PCUI also & actions profile assigned to Activity transaction is also working fine at GUI level & activity application in PCUI.. But in Account application it is throwing this below error.
    Error: The predecessor transaction has the status 'incorrect' .
    Detials of teh error:
    Diagnosis
    You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
    System Response
    The follow-up transaction is not created.
    Procedure
    Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
    Pls suggest solution for this.Helpful answers would be rewarded max points.
    Thanks in Advance.
    Regards,
    Charu Jhuthra

    Hi Charu,
    Did you fix this message, can you please share your solution,  i have the same message appreaing.
    Many thnaks
    Raj.D

  • "Waiting time until status incorrect" - BI delta loading issue

    Hi All,
    We have a delta master data load, which happens daily. It runs almost for 40 minutes, there is no extraction happening for first 31-32 minutes and the thousands of records are picked in the subsequent few minutes.
    After 30 minutes, the load is momentarity turning into  status 'RED' and the load is picking up as usual. I could see there is a setting for the load in RSMO transaction itself, in Settings tab --> Waiting Time Until Status Incorrect. In this settings time set is 30 minutes.
    Now can some help me in changing this setting time value or speed up the loading (i.e. to pick before 30 minutes). This has been happening for the past one week. Any help is highly appreciable, as this job fails unnecessarily in monitoring tool.
    Regards,
    Shashidhar.

    Hi Shashidhar,
    I had a performance issue for an infopackage loading from Generic datasource. The reason was identified as Index not being not created for the source table.
    These threads may be useful for your issue.
    RSC2_QOUT_CONFIRM_DATA  Long Running/Delayed Delta Infopackage
    n LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
    http://www.sapfans.com/forums/viewtopic.php?f=16&t=237705
    Regards,
    Hari.

  • Install Fails With SQL Server Version - Status: Incorrect

    Hi. I am working to install BPC 7 in a single server environment. During installation the setup diangostic detects a problem with [[Microsoft and 3rd Party Software]], below is what appears:
    X - SQL Server Version
    ____    OK - Required: 10.0.1600.22 or higher
    ____    OK - Currently: Not Installed
    ____    X   - Status: Incorrect
    X - SQL Reporting Services Server Version
    ____    OK - Required: 10.0.1600.22 or higher
    ____    OK - Currently: Not Installed
    ____    X   - Status: Incorrect
    X - OLAP Server Version
    ____    OK - Required: 10.0.1600.22 or higher
    ____    OK - Currently: Not Installed
    ____    X   - Status: Incorrect
    Under [[Computer Services Status]] SQL Server is alright:
    OK - MS SQL Server Service
    ____    OK - Required: Running
    ____    OK - Currently: Running
    ____    OK - Status: OK
    OK - MS SQL Server Agent Service
    ____    OK - Required: Running
    ____    OK - Currently: Running
    ____    OK - Status: OK
    OK - SQL Integrated Service
    ____    OK - Required: Running
    ____    OK - Currently: Running
    ____    OK - Status: OK
    OK - SQL Report Service
    ____    OK - Required: Running
    ____    OK - Currently: Running
    ____    OK - Status: OK
    OK - MS SQL Server OLAP Service
    ____    OK - Required: Running
    ____    OK - Currently: Running
    ____    OK - Status: OK
    What I've Checked so far:
    - Collation
    - Account for installation is SQL SysAdmin and a Windows account
    - Mixed mode authentication
    I should mention, this is a single server install on a 64 bit version of Windows, with 64 bit version of SQL.
    Any experience, ideas or suggestions are welcome.
    Joe
    Edited by: jwainz on Mar 29, 2010 5:55 PM

    I think the clearest statement about this is on page 11 of the Master Guide (SAP BPC 7.0 M Master Guide at [http://service.sap.com/instguidesEPM-BPC]).
    Look at the rows for OLAP Server and Microsoft SQL Server.  In each of those, you wil find this statement:
    "Can be 64‒bit when separate from Application/web services"
    On page 10 in the Installation Guide, for look at the rows for Application server Web Server.  The prerequisites are as follow:
    App Server:
    Windows Server 2003 or Windows Server 2003 R2 Standard or Enterprise Edition SP2 (32-bit) configured with NTFS, set to English (United States)
    Web Server:
    Windows Server 2003 or Windows Server 2003 R2 Standard or Enterprise Edition SP2 (32-bit) configured with NTFS
    Finally, the PAM is a bit confusing.  For product SAP BPC 7.0 FOR MICROSOFT, click on the tab Operating Systems and then click on the tab BPC Server.  That is the software that you install for the Application Server and the Web Server server types.  The Operating System Version listed is WINDOWS SERVER 2003/IA32 32BIT

Maybe you are looking for