PR to Contract text copying

Hi Friends,
While converting PR(Purchase Requisition) to contract, text is not being copied. Most of our PR are of not with Material, so that we maintain maually at item text while creating PR. We are using Item text. I checked in Customisation for Defining copying rules for Item texts for contracts as well as PR. In Item text linkages I tried with " " (Text automatically adopted in target object) and "*" (User can have text adopted in target object), but could not succeed. 
It is working fine for PR to PO adpoption.
Did I missed any thing ? Is there any customisation for above thing. Is there any user exit or BADI for this ?
Regards,
Sai Krishna

Hi,
Solved

Similar Messages

  • MSS - General Information Page - "Contract Text"

    Hello Experts,
    I am having trobule finding out where the field "Contact Text" comes from.  The field is shown on the MSS Page "General Information" on the iView "General Data".  The subheading is "Contract Data".
    I have run a trace on the portal page.  It looks like the page is reading the following infotypes:  0000, 0001, 0002, 0016, 0041, 0105, 0008, 0032, 004.
    I assume the "Contract Text" field would come from IT0016.  However, there is no "Contract Text" field on that infotype.  Can anyone please tell me where this "Contract Text" field comes from?
    Thanks,
    Mike

    The information that is displayed in the field "Contract Text" field is in the Infotype 0001 , field P0001-ANSVH
    Hope this solve you doubt.
    Regards

  • "Item Texts" copying from third-party PR to PO?

    I am creating a third party sales order (item category TAS). Here, I give some 'Material PO text' manually and save the TPO. (Select Item -> Menu Goto > Item > Texts).
    The resulting PR has the same text copied.
    Now, when I convert this PR into PO, the text is NOT getting copied.
    Any idea how can this be done?
    null

    Hi Neetu
    you have to mainatin Item text and not for material PO text...
    Do these settings:
    SPRO->MM->Purchasing->PO->Texts for POs--->Define copying rule for item texts..
    then check you should have a entry for "Item Text" if not then
    Put a Consec no. and against it enter item text. then for this you have to maintain text linkage where u should have source object as Purchase requisition.
    please confirm if these settings are already there?
    regrds
    yogesh

  • Does Nokia c5 supports text copy paste feature

    Friends i had recently bought a nokia c5 mobile phone and i wants to know that does this phone supports TEXT COPY AND PASTE FEATURE? Its urgent, plz reply. Thanks

    Once U have Selected the text keep pressing the # Key and pree the Left Soft Key to Copy The Text...
    To past the text in any text editor press and hold the # key and press Right Soft Key...
    # key plus Navigation keys also helps in removing the long texts... Just select the text and press C... Its faster than Using Delete Button to remove text..

  • How to configure Sales order item text copy to Purchase requisition item

    Hi,
    How to configure sales order item text copy to Purchase requisition text then copy to PO item text.
    Regards
    Jack

    Hi Rajesha,
    Thanks for your reply, some of the items in sales order are procured externally by us and our customer maintains text related to price and specification in the item details of the sales order, MRP creates planned order for these materials and these planned orders are always converted in pur requisition, we want that text from the sales order item details should be copied in to the purchase requisitions converted from planned orders.
    is there any user exit which can be called at the time of saving a purchase req or user exit for converting planned order in to pur req.?
    if there is any such exit available, then I think I can read the pegged requirement of the planned order where sales order item will be found then read the text in the item then copy this text in pur req then save pur req may work.
    but this will be a bulky development, please let me know if we can shorten the development.
    Thanks again
    Anand

  • Material text copy user exit

    Hi,
            I want to know user exit name for sales order when it copies material text to sales order in  line item text.
            Pop window will get triggered when material text copied from material to sales order item text.
    Thanks & Regards,
    Shekhar
    Edited by: chandra shekhar dubey on Nov 17, 2010 9:20 AM

    Hi,
    Try using USEREXIT_AVAILABILITY_IN(RV03VFZZ) or USEREXIT_ADD_FIELD_TO_LINE(FV45VFZZ) exits in SD. Due to various combinations possible (for example if you use route-scheduling it may behave differently than otherwise), it may not be possible to apply a common logic.
    I would suggest using USEREXIT_ADD_FIELD_TO_LINE to modify the date fields in the structure MVERF (field EDATU : Delivery date, MBDAT : Material avail. date and so on). At this point, system has already calculated the first set of dates based on customer requested delivery date, so you will need to do adjustments in all fields accordingly.
    Eg in this exit:
    w_date = sy-datum + 60.
    offset = w_date - mverf-mbdat.
    mverf-mbdat = mverf-mbdat + offset.
    mverf-lddat = mverf-lddat + offset.
    mverf-edatu = mverf-edatu + offset.
    Please note it will need some adjustments if you have a shipping calendar (eg sundays off..) in which case the offset may be a little different for EDATU.
    cheers,

  • Including text to contract and copy in PO

    Hi,
         I have created a text with a text name(PO_TEXT) in SO10 transaction. When creating contract(ME31k), in release order text, i have included the text that i have created.But it is not displaying the text that i have created. It is just saying that "INCLUDED PO_TEXT". I have created P.O against this contract. Even in print preview of this PO, it is displaying the same but not the actual text.
            Is there any configuration that is to be done for the text to be displayed,but not the text name.
              Please reply me as soon as you can.
    Thank you

    this is just what you are seeing on the paper or in the text overview, I am talking about the sapscript text.
    Go to your contract ME32K, go into the text overview, double click the text to open it in the editor.
    In the editior you can choose from menu GOTO > CHANGE EDITOR
    to switch between SAPSCRIPT Editor and Graphical Editor.
    In Graphical Editor the include line has a dark grey background.
    In Sapscript editor is an extra column for the command /:
    without this you just have text.
    How is it in your system?

  • Contract text

    Hi Gurus,
    Contract header text was maintained.. but if i dont want this header text in purchase order (which was created with referencing the contract) what settings need to be done.
    Regards,
    Subbu

    Hi,
    Goto SPRO > Materials Maaement > Purchasing > Purchase Order > Texts fo purchase orders > Define copying rules for heade texts > Select  01 (Header text) and click on text linkages > Here for contract give the fix value as N.
    Now it will wok.
    Regars,
    Prabu

  • Are SMS forwarding/Editing and Text Copy Paste functions supported in Firefox OS?

    Could not find any options to forward SMS or edit text messages, neither could find any options to copy paste general text. Most importantly, in the number dial pad, the cursor can't be moved to the desired location to add digits. Am I wrong? If so how do I go about these things?

    Hello,
    Thanks for reaching out to us! Unfortunately it is not possible to forward SMS messages. I'm not sure what you mean by editing text messages. As well as, could you elaborate on what you are looking for to be done with the dial pad?

  • Billing Doc-Header-Texts copy Accounting Doc-Hader Texts?

    Dear gurus,
    I it possible to copy Billing Doc.-header- Text1 to
    Accounting Document>>>>>>"Doc. Header Text" field?

    Hello,
    the SAP note 301077 lists the available userexits in SD/FI interface.
    If, for example, you want to fill a BSEG field of customer line, userexit EXIT_SAPLV60B_002 is the good one.
    Instead if you want to fill a BSEG field of a G/L line, userexit EXIT_SAPLV60B_004 is the good one.
    Best regards,
    Ivano.

  • Header Text copy to PO from vendor master

    Dear all,
    I am trying to pull data storeed in vendor master to PO for header text so that we don't need to repeat to each PO for the vendor.
    I tried to link this in "Texts for Purchase Orders" in SPRO ,But not able to link it
    B'coz it's not allowing me to add the object of vendor master
    so pl guide me how i link vendor master text to PO
    Regards,
    Vimlesh

    Hi,
    In customizing ->material management -> purchasing -> purchase order -> texts for purchase orders -> define copying rules for header texts, choose "header text" and click on text linkages. Here you can enter for source object "vendor master", and for source text choose vendor master header text.
    And in the FIX INDICATOR for text you have to maintain blank. then it will copy text
    This will copy text from vendor master to PO header text.
    Please check this and revert back if you need further details
    thanks,
    santosh

  • Header text copy from quotation to sales order

    Dear all,
    My Client Requirement is like this if i entered some text in Quotation header text the same should be copied into sales order hearder text , i tried a lot i am unable to find the answer
    kindly guide me.
    With Regards
    san rao

    Hi San Rao
    If the Quotation header text has to be copied into the sales order then while configuring text determination , make sure that you are Configuring sales document at header level two times and .First time you configure for quotation and second time you do for sales order and while doing for sales order you assign a sales order and assign a the text id that has been used for quotation .then your problem will be solved
    Regards
    Srinath

  • PO Text copy from Sales Order to Purchase Order

    Dear friends,
    Hope everyone is doing fine.
    I have the following business requirement for two situations
    Scenario 1) Purchase Order text from the Sales order has to be copied to the purchase order. Here sales order is converted to purchase requisition, and later the requisition is converted to the purchase Order.
    The standard SAP config is working absolutely fine for this.
    Scenario 2) Purchase Order text from the Sales Order has to be copied ot the purchase order. Here sales order is converted into a planned order, planned order is converted into purchase requisition, and later the requisition is converted to the purchase Order. For this situation, the text is not getting copied from Sales order to the requisition/purchase order.
    This is not working as of now with the configuration for the above scenario 1.
    Please throw some light to solve the scenario 2.
    Please let me know if there is a config or do we need to use any user exit or BADI to achieve this.
    Thanks in advance.
    Regards

    Hi Sam Matt ;
    You can benefit from MM:Define copy rules for PR texts .
    I checked , you can copy from sales order , like a belowed screens.
      Regards.
      M.Ozgur Unal

  • Text Copied from Illustrator CC 2014.1.0 Pastes as Image

    I have seen similar discussions but none of the answers are of any help to me as of today.
    Background:
    I am running OS X Yosemite 10.10
    All my CC apps are up to date as of (11/1/14)
    I am also up to date on all other software on my Mac
    My goal:
    Copy text from illustrator
    Paste in Mail, TextEdit, and Notes as live editable text
    Results:
    Text pastes as pdf or some type of an image depending on the app
    What it looks like:
    I'll start from the beginning to avoid some questions later.
    I open a new document in Illustrator.
    These are the clipboard settings in my preferences.
    Please Note - I have tried every combination of these settings. Turning them on and off one at a time and in combination does nothing to change the end product. I have turned them all off for this example, so as to not muddy the waters.
    I type some text. I did not use a text box in this example. I just clicked on the page with the type tool and typed this line. There are no added attributes. You can see the character settings are the most basic. Again, please note - I have tried using a text box with the same result.
    I use the type tool to highlight the text and then copy the text. I did not use the selection tool to select the text and copy.
    This is what the clipboard looks like. Note that the contents is "text".
    If I type text in PS (as an example) and copy to the clipboard it says "text". However, the text I copy out of PS I can paste anywhere as editable text.
    If I type text in Notes and copy to the clipboard it says RTF. This text can also be pasted anywhere as editable text.
    This leads me to believe that this is an Illustrator centric problem I am experiencing.
    I click into the body of an email and paste. Looks fine, but when I try to click into the text (such as between the words "into" and "Mail") I cannot do it.
    The line of words is highlighted and not editable at all.
    If I right click on the image of the line of text and highlight "open attachment" you can see the clipboard pasted in as a .pdf and not editable text.
    Interestingly, if I open a new note and try to paste the line of text, it also pastes as a .pdf but just the icon show up. Double clicking on the icon will open the text as a pdf in acrobat.
    I did not have this issue until CC2014 updates were made. I would like to know if there is something that can be done or is this a bug in Illustrator. If it is a bug I don't want to spend time looking for workarounds. I will use another program when I know there will be a good deal of copy and paste work to be done. It's inconvenient for my older Illustrator files now have this issue when I open them in CC2014.
    I know I can use the "paste and match style" but it's a force of habit to use the shortcut for paste. It's also a ridiculous change to Illustrator for the cut/paste to act this way. If it indeed was planned and not a bug, what would the benefit be?
    If anyone has insight into the problem I am eager to know what's going on.
    Finally, if there is no other way to fix this then can someone remind me how to customize the shortcut key combinations in Mail, Notes and TextEdit? I seem to remember (long ago) being able to customize certain shortcuts in some apps, but I never did it in anything but Adobe apps and even then it was CS5.
    Thanks in advance for any help!

    I ran into this issue today. I wanted to copy text into an email – however I pasted it it stayed uneditable.
    The workaround was to open Text Edit and use the menu item 'paste and match style' (Command+Option+Shift+V) which pastes it as editable text. Then copy and paste that into mail.
    What a pain.
    If I try 'paste and match style' directly in mail from illustrator it pastes as a flipping pdf.
    I'm 10.10.2 yosemite and using Adobe CC

  • Item texts copied from purchase order to delivery

    Hi Sales Gurus,
    I am facing the following issue.
    In the intercompany process we create the delivery based on purchased order.
    Our need is to copy the item texts of the purchase order to the item texts of the delivery.
    How can i do that?
    Thank you
    João Fernandes

    João,
    Transaction VOTXN, Delivery, Item.
    Then assign a specific text procedure and Access Sequence with the appropriate text ids.
    Regards,
    (Boa tarde)
    Sérgio

Maybe you are looking for