PR to SRM- Shipment Address & INCM error

Dear SRM Experts
In Classic Scenario, i am trying to move ECC-MM Purchase Requsition to SRM.
After doing necessary configuration related to it, SLG1 in SRM is showing following two errors
Error Line1
No address found for partner function type Ship-To Address
Message no. BBP_PD051
and
Error Line 2
System status INCM is active (Shopping Cart 1000000501)
Message no. BS013
Diagnosis
Object Shopping Cart 10000XXXX has system status INCM (Incomplete). According to this status, transaction 'Order Shopping Cart' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
I have checked the Shipment Address attribute in PPOMA_BBP, but there is no address list when i click F4 to assign address attribute to user.
Why SRM show error of Address and INCM
What should i perform steps to remove errors to get ECC PR to SRM so that i can perform Sourcing there.
Regards
Ahmed

Hi Experts,
In Plan Driven Procurement I am getting the Same Errors.
No address found for partner function type Ship-To Address
System status INCM is active (Shopping Cart 1000001996)
I created one Dummy Delivery Address in Web GUI and assigned the same to RFC User Which was assigned to Local POrg & Pgrp.
Any Idea on how this issue need to be resolved, your inputs are highly helpful. Thanks in Advance.
We are at SAPKH60403 for ECC
We are at SAPKIBK013 for SRM 5.0
Thanks for help,
Vamsi

Similar Messages

"Server either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error driving me nuts!

OK; have been trying to setup a test VM based RDS deployment for a few days now with no luck.
this error mentioned above:
"Server <server name> either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error is driving me nuts!
I have removed and re-added the RD Virtualization Host role numerous times, each time having the "create a virtual switch" checkbox selected, but it did NOT create any virtual switch.
I created the external virtual switch manually and tried to create the desktop collection again, no luck with the same error.
a few questions:
1. you don't assign IP to a switch! you assign IP to Network Interfaces. why does the error puts it like this?! it is technically wrong.(yeah yeah I know all about how you'd assign IP to managed switches in real world to telnet into them and manage them.
you know better than me that it is not the case here!)
2.the RDS Virtualization hosts are using their wifi card as the card for the virtual switch. could that be the reason? I even disabled their unplugged wired NIC just to make sure that the wifi is the only available option for the RDS wizard to use for the
virtual switch creation; but it didn't use it and it didn't create any virtual switch automatically.
3.if WIFI nic is indeed the reason, is it your suspension or an official documents is there somewhere stating so (that the WIFI NICS on a Virtualization hosts are not supported as the hub for a virtual switch).
4.what are the properties of the virtual switch the RDS requires? does it have to be external? why can't it work even with my manually created external switch?
5.how would I fix it?
P.S: the environment is made up of 2 laptops, having windows 2012 R2 trial installed on them, using their wifi to connect to the out world. no cable is plugged into their wired NIC card.

Hi,
Thank you for posting in Windows Server Forum.
The simplest short term solution was to connect each computer to a small switch that had no other connectivity. This brought up the link light on the external NIC and allowed the creation of the collection to complete. You need to use an external switch. You
can create one external switch which might fix the problem.
Please check below article for information.
VDI Deployment Error About Virtual Switch
In addition please referthis article for information regarding virtual switch.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

How to disable manual change in shipment address in delivery

Hi Gurus,
My client's current configuration allows changing the shipment address (partner tab in header of delivery) on the address tab - without changing the ship-to party itself
They now want to implement a change where all partner details will not only be picked from customer master - but also nobody should be able to change the address ( by double clicking on partner number and changing address on the address tab)
Any ideas / suggestions ?
Thanks,

Dear SM,
As per the standard functionality you can change the ship to party address at sales order and at delivery level.
Try with this option.
Take help of BASIS people to give the authorisation for change transactions VA02 and VL02N to the responsible User not for all users so that you can avoid this.
Other than this you need to go for enhancement with the help of ABAPer.
I hope this will help you,
Regards,
Murali.

Address list error -- 5.7.1 Relaying not allowed

Hi,
We have setup the Java Messaging Server to send/recieve mails from a gateway. The inbound mail flow works perfectly but, the outbound mail flow has issues.
The outbound mails are not hitting the gateway. When checked the log for outbound mail, it displays the address list error - 5.7.1 Relaying not allowed for any domain i.e gmail.com, etc
version:
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:15:31, Oct 12 2007; 32bit)
SunOS P1192FLPLN 5.9 Generic_118558-02 sun4u sparc SUNW,Sun-Fire
here is the log for reference...
=========================================================================
root@P1192FLPLN # /opt/SUNWmsgsr/sbin/imsimta test -rewrite -debug -source_channel=tcp_local [email protected] [email protected]
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
17:09:37.43: Debug output enabled, system P1192FLPLN.extmail.xyz.com, process 3fbf.1, message enqueue routines version V6.3 compiled Oct 12 2007 17:15:38
17:09:37.43: mmc_winit('tcp_local','[email protected]','') called.
17:09:37.43: Address reversal invoked on [email protected], force reverse URL 1, capture 1
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.43: Rewrite: "$*", position 0, hash table -
17:09:37.43: Found: "$A$E$F$U%[email protected]"
17:09:37.43: Rewrite failed, not forward.
17:09:37.43: Rewrite: "$*", position 1, hash table -
17:09:37.43: Failed.
17:09:37.43: Rewrite: "$*", position 0, rewrite database -
17:09:37.43: Failed
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.43: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.43: Found: "$U%[email protected]"
17:09:37.43: New mailbox: "abhishek.sen".
17:09:37.43: New host: "extmail.xyz.com".
17:09:37.43: New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.43: New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.43: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.43: - found on channel l
17:09:37.43: Routelocal flag set; scanning for % and !
17:09:37.43: Checking reverse URL cache for: [email protected]
17:09:37.43: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.48: Resulting URL: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49: mmc_open_url called to open ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected])), flags = 384
17:09:37.49: URL with quotes stripped: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49: LDAP URL identified
17:09:37.49: URL context #1 will be used
17:09:37.49: Performing URL search on: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.53: mmc_read_url result: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53: URL resolution returned: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53: mmc_read_url result: [preferredlanguage] en
17:09:37.53: URL resolution returned: [preferredlanguage] en
17:09:37.53: Attribute index: 0
17:09:37.53: LDAP URL produced preferred language en
17:09:37.53: mmc_read_url result: [mailmsgmaxblocks] 700
17:09:37.53: URL resolution returned: [mailmsgmaxblocks] 700
17:09:37.53: Attribute index: 0
17:09:37.53: LDAP URL produced blocklimit 700
17:09:37.53: mmc_read_url result: [mail] [email protected]
17:09:37.53: URL resolution returned: [mail] [email protected]
17:09:37.54: Attribute index: 0
17:09:37.54: LDAP URL produced address [email protected]
17:09:37.54: No more results to return
17:09:37.54: Override postmaster: [email protected]
17:09:37.54: Preferred language en
17:09:37.54: Content return block limit now 700
17:09:37.54: Mapped return address: [email protected]
17:09:37.54: from_access mapping check: ||MAIL|tcp_local|[email protected]|
17:09:37.54: Queue area size 73232902, temp area size 2067314
17:09:37.54: 18308225 blocks of effective free queue space available; setting disk limit accordingly.
17:09:37.54: 1033657 blocks of free temporary space available; setting disk limit accordingly.
17:09:37.54: - passed.
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.54: Rewrite: "$*", position 0, hash table -
17:09:37.54: Found: "$A$E$F$U%[email protected]"
17:09:37.54: Rewrite failed, not forward.
17:09:37.54: Rewrite: "$*", position 1, hash table -
17:09:37.54: Failed.
17:09:37.54: Rewrite: "$*", position 0, rewrite database -
17:09:37.54: Failed
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.54: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.54: Found: "$U%[email protected]"
17:09:37.54: New mailbox: "abhishek.sen".
17:09:37.54: New host: "extmail.xyz.com".
17:09:37.54: New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.56: New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.56: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.56: - found on channel l
17:09:37.56: Routelocal flag set; scanning for % and !
*** Debug output from rewriting a forward header address:
17:09:37.56: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.56: Rewrite: "$*", position 0, hash table -
17:09:37.56: Found: "$A$E$F$U%[email protected]"
17:09:37.57: Rewrite failed, not envelope.
17:09:37.57: Rewrite: "$*", position 1, hash table -
17:09:37.57: Failed.
17:09:37.57: Rewrite: "$*", position 0, rewrite database -
17:09:37.57: Failed
17:09:37.57: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.57: Rewrite: "xyz.com", position 0, hash table -
17:09:37.57: Failed.
17:09:37.57: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.59: Failed
17:09:37.59: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.59: Rewrite: "*.com", position 0, hash table -
17:09:37.59: Failed
17:09:37.59: Rewrite: ".com", position 0, hash table -
17:09:37.59: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.59: New mailbox: "bhanu.prasad".
17:09:37.59: New host: "xyz.com".
17:09:37.59: New route: "TCP-DAEMON".
17:09:37.59: New channel system: "TCP-DAEMON".
17:09:37.59: Looking up host "TCP-DAEMON".
17:09:37.60: - found on channel tcp_local
17:09:37.60: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.60: Rewrite: "$*", position 0, hash table -
17:09:37.60: Found: "$A$E$F$U%[email protected]"
17:09:37.60: Rewrite failed, not envelope.
17:09:37.60: Rewrite: "$*", position 1, hash table -
17:09:37.60: Failed.
17:09:37.60: Rewrite: "$*", position 0, rewrite database -
17:09:37.60: Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.61: Rewrite: "xyz.com", position 0, hash table -
17:09:37.61: Failed.
17:09:37.61: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.61: Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.61: Rewrite: "*.com", position 0, hash table -
17:09:37.61: Failed
17:09:37.61: Rewrite: ".com", position 0, hash table -
17:09:37.63: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.63: New mailbox: "bhanu.prasad".
17:09:37.63: New host: "xyz.com".
17:09:37.63: New route: "TCP-DAEMON".
17:09:37.63: New channel system: "TCP-DAEMON".
17:09:37.63: Looking up host "TCP-DAEMON".
17:09:37.63: - found on channel tcp_local
17:09:37.63: Rewrite rules result: [email protected]
17:09:37.63: Checking reverse URL cache for: [email protected]
17:09:37.63: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.65: URL generation failed, status = 0
*** Debug output from rewriting a forward envelope address:
17:09:37.65: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.65: Rewrite: "$*", position 0, hash table -
17:09:37.65: Found: "$A$E$F$U%[email protected]"
17:09:37.65: Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.65: old state = not checked.
17:09:37.65: Domain check on xyz.com.
17:09:37.66: Could not add domain result 0 to cache for xyz.com.
17:09:37.66: new state = fail pending.
17:09:37.66: Rewrite failed due to prechannel mismatch.
17:09:37.66: Rewrite: "$*", position 1, hash table -
17:09:37.66: Failed.
17:09:37.66: Rewrite: "$*", position 0, rewrite database -
17:09:37.66: Failed
17:09:37.66: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.66: Rewrite: "xyz.com", position 0, hash table -
17:09:37.66: Failed.
17:09:37.67: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.67: Failed
17:09:37.67: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.67: Rewrite: "*.com", position 0, hash table -
17:09:37.67: Failed
17:09:37.67: Rewrite: ".com", position 0, hash table -
17:09:37.67: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.67: New mailbox: "bhanu.prasad".
17:09:37.67: New host: "xyz.com".
17:09:37.67: New route: "TCP-DAEMON".
17:09:37.69: New channel system: "TCP-DAEMON".
17:09:37.69: Looking up host "TCP-DAEMON".
17:09:37.69: - found on channel tcp_local
address channel = tcp_local
forward channel = tcp_local
channel description =
channel caption =
channel user filter =
dest channel filter =
source channel filter =
channel flags #0 = BIDIRECTIONAL SINGLE_SYSTEM IMMNONURGENT NOSERVICEALL channel flags #1 = SMTP_CRLF MX IDENTNONENUMERIC DEFAULT
channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3 = LOGGING NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4 = EIGHTNEGOTIATE HEADERKEEPORDER NOHEADERREAD RULES
channel flags #5 = TRUNCATESMTPLONGLINES
channel flags #6 = LOCALUSER REPORTNOTARY
channel flags #7 = SWITCHCHANNEL REMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALNONE NOTURN
defaulthost = extmail.xyz.com extmail.xyz.com
linelength = 998
addrsperfile = 99
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = tcp-daemon
channel queue 0 name = SMTP_POOL
channel queue 1 name = SMTP_POOL
channel queue 2 name = SMTP_POOL
channel queue 3 name = SMTP_POOL
channel after params =
channel daemon name = 10.8.51.126
channel user name =
urgentnotices = 1 2 4 7
normalnotices = 1 2 4 7
nonurgentnotices = 1 2 4 7
channel rightslist ids =
local behavior flags = %x0
expandchannel =
notificationchannel =
dispositionchannel =
tlsswitchchannel =
backward channel = tcp_local
unique identifier = [email protected]
header forward address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
header reverse address = [email protected]
envelope forw address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
envelope rev address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
name =
mbox = bhanu.prasad
Extracted address action list:
 [email protected]
Extracted 733 address action list:
 [email protected]
Address list expansion:
*** Debug output from alias expansion:
17:09:37.76: Inner expand, level = 0, mailbox = [email protected]
17:09:37.76: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.76: Rewrite: "$*", position 0, hash table -
17:09:37.76: Found: "$A$E$F$U%[email protected]"
17:09:37.76: Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.76: old state = not checked.
17:09:37.76: Domain check on xyz.com.
17:09:37.77: Could not add domain result 0 to cache for xyz.com.
17:09:37.77: new state = fail pending.
17:09:37.77: Rewrite failed due to prechannel mismatch.
17:09:37.77: Rewrite: "$*", position 1, hash table -
17:09:37.77: Failed.
17:09:37.77: Rewrite: "$*", position 0, rewrite database -
17:09:37.77: Failed
17:09:37.77: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.77: Rewrite: "xyz.com", position 0, hash table -
17:09:37.77: Failed.
17:09:37.79: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.79: Failed
17:09:37.79: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.79: Rewrite: "*.com", position 0, hash table -
17:09:37.79: Failed
17:09:37.79: Rewrite: ".com", position 0, hash table -
17:09:37.79: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.79: New mailbox: "bhanu.prasad".
17:09:37.79: New host: "xyz.com".
17:09:37.79: New route: "TCP-DAEMON".
17:09:37.80: New channel system: "TCP-DAEMON".
17:09:37.80: Looking up host "TCP-DAEMON".
17:09:37.80: - found on channel tcp_local
-13 expansion total.
*** Debug output from submitting an envelope address:
17:09:37.80: mmc_wadr(0x0017ae68,'[email protected]','[email protected]') called.
17:09:37.80: Copy estimate before address addition is 1
17:09:37.80: Parsing address [email protected]
17:09:37.80: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.80: Rewrite: "$*", position 0, hash table -
17:09:37.81: Found: "$A$E$F$U%[email protected]"
17:09:37.81: Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.81: old state = not checked.
17:09:37.81: Domain check on xyz.com.
17:09:37.81: Could not add domain result 0 to cache for xyz.com.
17:09:37.81: new state = fail pending.
17:09:37.81: Rewrite failed due to prechannel mismatch.
17:09:37.81: Rewrite: "$*", position 1, hash table -
17:09:37.83: Failed.
17:09:37.83: Rewrite: "$*", position 0, rewrite database -
17:09:37.83: Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
xyz.com", literal = "", tag = ""
17:09:37.83: Rewrite: "xyz.com", position 0, hash table -
17:09:37.83: Failed.
17:09:37.83: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.83: Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
.com", literal = "", tag = ""
17:09:37.83: Rewrite: "*.com", position 0, hash table -
17:09:37.84: Failed
17:09:37.84: Rewrite: ".com", position 0, hash table -
17:09:37.84: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.84: New mailbox: "bhanu.prasad".
17:09:37.84: New host: "xyz.com".
17:09:37.84: New route: "TCP-DAEMON".
17:09:37.84: New channel system: "TCP-DAEMON".
17:09:37.84: Looking up host "TCP-DAEMON".
17:09:37.84: - found on channel tcp_local
17:09:37.84: - adding address [email protected] to headers.
17:09:37.86: - orig_send_access mapping check: tcp_local|abhishek.sen@extm
ail.xyz.com|tcp_local|[email protected]
17:09:38.16: - failed.
17:09:38.16: Good address count 0 defer count 0
17:09:38.16: Copy estimate after address addition is 1
17:09:38.16: mmc_waend(0x0017ae68) called.
17:09:38.16: Copy estimate is 1
17:09:38.16: Queue area size 73232902, temp area size 2067288
17:09:38.16: 36616451 blocks of effective free queue space available; setting
disk limit accordingly.
17:09:38.16: 1033644 blocks of free temporary space available; setting disk li
mit accordingly.
Expanded address:
[email protected]
Submitted address list:
Address list error -- 5.7.1 Relaying not allowed: [email protected]
Submitted notifications list:
=========================================================================Do we have to make any changes on other config files except the imta.cnf and mappings file for inbound and outbound..
thanks for any help
Edited by: prasad0_0 on Jul 8, 2008 4:58 AM

i have already setup the messaging server 6 months back.. followed the same procedure to route mails to a gateway..
made changes to the imta.cnf for outbound mail flow to the tcp_local and mappings file to accept inbound mail flow from the gateway. Its working perfectly on the older setup, but this now, have issues with new setup.
here is the imta.cnf file..
! IMTA configuration file
! part I : rewrite rules
! Domain Rewrite Rules.
! Uncomment this line to use domain rewrite rules
! from the configuration file instead of the domain database.
! Please refer to the iMS documentation for details.
!<IMTA_TABLE:domains.rules
! Rules to select local users
$* $A$E$F$U%[email protected]
P1192FLPLN.extmail.xyz.com $U%[email protected]
extmail.xyz.com $U%[email protected]
! ims-ms
.ims-ms-daemon $U%$H.ims-ms-daemon@ims-ms-daemon
! lmtp
!.lmtp $U%$H@lmtpcs-daemon
! lmtpn
!.lmtpn $U%$H@lmtpcn-daemon
! native
.native-daemon $U%$H.native-daemon@native-daemon
! pipe
.pipe-daemon $U%$H.pipe-daemon@pipe-daemon
! tcp_local
! Rules for top level internet domains
<IMTA_TABLE:internet.rules
! tcp_intranet
! Do mapping lookup for internal IP addresses
[] $E$R${INTERNAL_IP,$L}$U%[$L]@tcp_intranet-daemon
.extmail.xyz.com $U%$H.extmail.xyz.com@tcp_intranet-daemon
* $U%$&0.extmail.xyz.com
! reprocess
reprocess $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
reprocess.P1192FLPLN.extmail.xyz.com $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
! process
process $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
process.P1192FLPLN.extmail.xyz.com $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
! defragment
defragment $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
defragment.P1192FLPLN.extmail.xyz.com $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
! conversion
conversion $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
conversion.P1192FLPLN.extmail.xyz.com $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
! bitbucket
bitbucket $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
bitbucket.P1192FLPLN.extmail.xyz.com $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
! deleted
deleted-daemon $U%$H@deleted-daemon
.deleted-daemon $U%$H@deleted-daemon
! inactive
inactive-daemon $U%$H@inactive-daemon
.inactive-daemon $U%$H@inactive-daemon
! hold
hold-daemon $U%$H@hold-daemon
.hold-daemon $U%$H@hold-daemon
! part II : channel blocks
defaults notices 1 2 4 7 copywarnpost copysendpost postheadonly noswitchchannel immnonurgent maxjobs 7 logging defaulthost extmail.xyz.com extmail.xyz.com
! delivery channel to local /var/mail store
l subdirs 20 viaaliasrequired maxjobs 7
P1192FLPLN.extmail.xyz.com
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D
ims-ms-daemon
! native
native defragment subdirs 20 maxjobs 1
native-daemon
! pipe
pipe single defragment subdirs 20
pipe-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 loopcheck daemon 10.8.51.126
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipientpolicy 4
tcp_intranet-daemon
! tcp_submit
tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipientpolicy 4
tcp_submit-daemon
! tcp_auth
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4
tcp_auth-daemon
! tcp_tas
tcp_tas smtp mx single_sys allowswitchchannel mustsaslserver maytlsserver deliveryflags 2
tcp_tas-daemon
! tcp_lmtpss (LMTP server - store)
!tcp_lmtpss lmtp flagtransfer
!tcp_lmtpss-daemon
! tcp_lmtpcs (LMTP client - store)
!tcp_lmtpcs defragment lmtp port 225 nomx single_sys subdirs 20 maxjobs 7 pool SMTP_POOL dequeue_removeroute
!lmtpcs-daemon
! reprocess
reprocess
reprocess-daemon
! process
process
process-daemon
! defragment
defragment
defragment-daemon
! conversion
conversion
conversion-daemon
! bitbucket
bitbucket
bitbucket-daemon
! deleted
deleted
deleted-daemon
! inactive
inactive
inactive-daemon
! hold
hold
hold-daemonand mappings file..
! MTA mappings file
! for access control and other table lookups
FROM_ACCESS
! Entries to block certain submissions normally would be inserted here,
! above the ntended-to-be-final entries that while permitting submission,
! merely disable any potential "vacation" effect.
! The following entries disable Sieve "vacation" action on lists sorts
! of addresses, as recommended by the Sieve "vacation" extension draft.
 *|SMTP*|*|*|MAILER-DAEMON@*|* $!$Y
 *|SMTP*|*|*|LISTSERVE*@|* $!$Y
 *|SMTP*|*|*|majordomo@*|* $!$Y
 *|SMTP*|*|*|*-request@*|* $!$Y
 *|SMTP*|*|*|*-owner@*|* $!$Y
 *|SMTP*|*|*|owner-*@*|* $!$Y
PORT_ACCESS
*|*|*|*|* $C$|INTERNAL_IP;$3|$Y$E
* $YEXTERNAL
INTERNAL_IP
$(10.8.55.49/24) $Y
$(10.8.51.125) $Y
$(10.8.51.126) $Y
127.0.0.1 $Y
* $N
ORIG_SEND_ACCESS
tcp_local|*|tcp_local|* $N$D30|Relaying$ not$ allowed
tcp_*|*|native|* $N
tcp_*|*|hold|* $N
tcp_*|*|pipe|* $N
tcp_*|*|ims-ms|* $N
! Block "external" submissions of explicitly source-routed "internal" addresses
tcp_local|*|tcp_intranet|@*:*.* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*$%*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*.*!*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|"*@*"@* $N$D30|Explicit$ routing$ not$ allowed
SEND_ACCESS
tcp_*|*|*|*@[127.*] $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@localhost.* $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.com $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.net $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.org $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.test $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.example $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.invalid $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.localhost $X5.1.2|$NBad$ destination$ system
<IMTA_TABLE:mappings.localewe are able to receive mails from the gateway, but when using uwc to send the mail, the mail doesnt hit the gateway. trying a telnet from the messaging server to the gateway, works perfectly.
thanks in advance.

SRM MDM Catalog (Subscreen Error)

Hi,
I am facing an issue with the SRM MDM catalog.
We are currently implementing SRM-MDM catalog 1.0 SP1 Patch01 HF1.
Our MDM server version is MDM 5.5 SP5 Patch02 HF1.
The steps while creating a Shopping Cart are as follows:
- Log into SRM Shopping Screen.
- Select the SRM MDM Catalog
- Inside the SRM MDM catalog select an item and click on the shopping basket to add the item to the shopping cart.
- Once I click on the shopping basket we are getting the below error
Error when processing your request
What has happened?
The URL http://mb1es1001.idcsap.com:8000/sap/bc/gui/sap/its/bbpsc01/ was not called due to an error.
Note
The following error text was processed in the system SR6 : Subscreen not found
The error occurred on the application server MB1ES1001_SR6_00 and in the work process 1 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLBBP_SC_UI_ITS
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SR6 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server MB1ES1001_SR6_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server MB1ES1001_SR6_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 001 -u: RAJ -l: E -s: SR6 -i: MB1ES1001_SR6_00 -w: 1 -d: 20070912 -t: 143649 -v: ABORT_MESSAGE_STATE -e: Subscreen not found
If any have any idea about this error, please help me resolve it. Full points will be awarded.

Hi
Check the SAP Note 967088 and download the configuration guide from SAP official website (SAP Marketplace - OSS Login required). Did you raised any message with SAP as well on this yet. If not, please do the same for faster processing of your query.
Please check what all error logs appear in SLG1 and RZ10 and RZ20 transactions in this case.
Which SRM/CCM/MDM versions, support packs are you using ?
FYI, Catalog names are case sensitive.
OCI parameter should be like this.
0 http://<J2EEhost.domain>:<J2EEport>/SRM-MDM/SRM_MDM
10 username User1
20 password <blank>
30 server <MDM Server>
40 port <Repositiry port>
50 catalog <Repository name>
60 uilanguage SY-LANGU
70 datalanguage SY-LANGU
80 mask <blank>
90 named search <blank>
User name and password mainatined in MDM console is case sensitive.I would suggest you to follow this step
1.In MDM Console for User1 enter password as user1(note that password is all small case)
2.Ensure that you enter the password in similar manner in defining OCI.
Please try the following OSS Notes & links below ->
OSS Note 895183
947362
938495
Note 871302 - Unable to switch between catalogs using F4 help
Note 890967 - /CCM/CHECK_TREX shows incorrect document content
Note 946185 - CCM20: /CCM/CHECK_TREX modifications
Note 707781 - Product search does not find all documents
Note 481295 - Short dump RAISE_EXCEPTION when expanding a product node
Note 723688 BBP TREX corrections for SRM 4.0 SP01
Note 778688 TREX_INDEX_MANAGER unit test update_view(): incorrect search
Note 930788 - Search help for catalog does not display all catalogs
Note 1028343 Changes in the repository not reflected in Catalog UI
Note 1015201 - SRM-MDM Catalog 1.0 Patch02 Release Note
Note 487917 BADI implementation f. BBP_CATALOG_CONTENT (Troubleshooting)
Note 877131 Product category is not permitted for the user
Note 623067 SRM 2.0 Integrated Catalog does not display catalog info
Re: ITS Template not found
SRM MDM Catalog --Login error
Do let me know.
Regards
- Atul

Terminated by signal SIGSEGV (Address boundary error)

Hi,
I was doing a bit of multitasking, and the kernel ran out of SWAP and crashed. After reboot everything is borked. Every program I had open prior to crash wont start or crashes soon after opening. (Chromium, Clementine, Terminal, Smuxi, VMware...). The error is either segmentation fault or some weird error.
Smuxi:
Stack overflow: IP: 0x7f0d476380ff, fault addr: (nil)
Stacktrace:
at <unknown> <0xffffffff>
at Gtk.Application.Run () [0x00001] in /build/gtk-sharp-2/src/gtk-sharp-2.12.22/gtk/Application.cs:135
<...>
at Smuxi.Frontend.Gnome.Frontend.Init (string[]) [0x00239] in /build/smuxi/src/smuxi-0.11/src/Frontend-GNOME/Frontend.cs:281
at Smuxi.Frontend.Gnome.MainClass.Main (string[]) [0x000b2] in /build/smuxi/src/smuxi-0.11/src/Frontend-GNOME/Main.cs:75
at (wrapper runtime-invoke) <Module>.runtime_invoke_void_object (object,intptr,intptr,intptr) <IL 0x00050, 0xffffffff>
~ % chromium
[7585:7610:0606/150214:ERROR:nss_util.cc(853)] After loading Root Certs, loaded==false: NSS error code: -8018
[7585:7585:0606/150214:ERROR:component_loader.cc(138)] Failed to parse extension manifest.
[7585:7585:0606/150214:ERROR:background_mode_manager_aura.cc(14)] Not implemented reached in virtual void BackgroundModeManager::EnableLaunchOnStartup(bool)
fish: Job 1, “chromium” terminated by signal SIGSEGV (Address boundary error)
~ % lxterminal
fish: Job 1, “lxterminal ” terminated by signal SIGSEGV (Address boundary error)
~ % clementine
14:44:49.823 WARN unknown libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
14:44:50.217 WARN unknown libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
14:54:12.230 WARN unknown QTimeLine::start: already running
14:54:13.089 WARN unknown QTimeLine::start: already running
14:54:13.434 WARN unknown QTimeLine::start: already running
14:54:13.737 WARN unknown QTimeLine::start: already running
14:54:14.378 WARN unknown QTimeLine::start: already running
14:54:14.686 WARN unknown QTimeLine::start: already running
14:54:15.050 WARN unknown QTimeLine::start: already running
14:54:15.876 WARN unknown QTimeLine::start: already running
14:54:16.152 WARN unknown QTimeLine::start: already running
14:54:16.454 WARN unknown QTimeLine::start: already running
14:54:17.409 WARN unknown QTimeLine::start: already running
14:54:20.256 WARN unknown QTimeLine::start: already running
14:54:22.687 WARN unknown QTimeLine::start: already running
14:54:32.169 WARN unknown QTimeLine::start: already running
14:54:33.489 WARN unknown QTimeLine::start: already running
fish: Job 1, “clementine” terminated by signal SIGSEGV (Address boundary error)
~ % steam
Running Steam on arch 64-bit
STEAM_RUNTIME is enabled automatically
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Uploading dump (out-of-process) [proxy '']
/tmp/dumps/assert_20140606150623_1.dmp
/home/jan/.local/share/Steam/steam.sh: line 755: 8003 Segmentation fault (core dumped) $STEAM_DEBUGGER "$STEAMROOT/$PLATFORM/$STEAMEXE" "$@"
What do?
EDIT:
It is also worth mentioning that I've had ran the update earlier today, which may have something to do with this:
[2014-06-06 14:06] [PACMAN] Running 'pacman -Syu'
[2014-06-06 14:06] [PACMAN] synchronizing package lists
[2014-06-06 14:06] [PACMAN] starting full system upgrade
[2014-06-06 14:09] [PACMAN] upgraded libwbclient (4.1.7-1 -> 4.1.8-1)
[2014-06-06 14:09] [PACMAN] upgraded cifs-utils (6.2-1 -> 6.3-1)
[2014-06-06 14:09] [PACMAN] upgraded clutter-gst (2.0.10-2 -> 2.0.12-1)
[2014-06-06 14:09] [PACMAN] upgraded dart (1.4.0-1 -> 1.4.2-1)
[2014-06-06 14:09] [PACMAN] upgraded e2fsprogs (1.42.9-2 -> 1.42.10-1)
[2014-06-06 14:09] [PACMAN] installed libx264 (1:142.20140311-4)
[2014-06-06 14:09] [PACMAN] upgraded x264 (1:142.20140311-1 -> 1:142.20140311-4)
[2014-06-06 14:09] [PACMAN] upgraded ffmpeg (1:2.2.2-3 -> 1:2.2.3-1)
[2014-06-06 14:09] [ALPM] warning: /etc/passwd installed as /etc/passwd.pacnew
[2014-06-06 14:09] [ALPM] warning: /etc/group installed as /etc/group.pacnew
[2014-06-06 14:09] [PACMAN] upgraded filesystem (2013.05-2 -> 2014.05-2)
[2014-06-06 14:09] [PACMAN] upgraded gdk-pixbuf2 (2.30.7-1 -> 2.30.8-1)
[2014-06-06 14:09] [PACMAN] upgraded gedit (3.12.1-1 -> 3.12.2-1)
[2014-06-06 14:09] [PACMAN] upgraded gmime (2.6.20-1 -> 2.6.20-2)
[2014-06-06 14:09] [PACMAN] upgraded gnome-calculator (3.12.1-1 -> 3.12.2-1)
[2014-06-06 14:09] [PACMAN] upgraded gnome-icon-theme-symbolic (3.12.0-1 -> 3.12.0-2)
[2014-06-06 14:09] [PACMAN] upgraded gnome-icon-theme (3.12.0-1 -> 3.12.0-2)
[2014-06-06 14:09] [PACMAN] upgraded gnome-menus (3.10.1-1 -> 3.10.1-2)
[2014-06-06 14:09] [PACMAN] upgraded gnome-tetravex (3.12.2-1 -> 3.12.3-1)
[2014-06-06 14:09] [PACMAN] upgraded gnupg (2.0.22-2 -> 2.0.23-1)
[2014-06-06 14:09] [PACMAN] upgraded graphviz (2.36.0-2 -> 2.36.0-3)
[2014-06-06 14:09] [PACMAN] upgraded gupnp (0.20.11-1 -> 0.20.12-1)
[2014-06-06 14:09] [PACMAN] upgraded perl (5.18.2-2 -> 5.20.0-2)
[2014-06-06 14:09] [PACMAN] upgraded vim-runtime (7.4.307-3 -> 7.4.307-4)
[2014-06-06 14:09] [PACMAN] upgraded openssl (1.0.1.g-1 -> 1.0.1.h-1)
[2014-06-06 14:09] [PACMAN] upgraded python2 (2.7.6-3 -> 2.7.7-1)
[2014-06-06 14:09] [PACMAN] upgraded gvim (7.4.307-3 -> 7.4.307-4)
[2014-06-06 14:09] [PACMAN] upgraded imagemagick (6.8.9.1-2 -> 6.8.9.1-3)
[2014-06-06 14:09] [PACMAN] upgraded python-setuptools (3.6-1 -> 4.0.1-1)
[2014-06-06 14:09] [PACMAN] upgraded ipython (2.0.0-1 -> 2.1.0-1)
[2014-06-06 14:09] [PACMAN] upgraded irssi (0.8.15-8 -> 0.8.16-1)
[2014-06-06 14:09] [PACMAN] upgraded json-glib (1.0.0-1 -> 1.0.2-1)
[2014-06-06 14:09] [PACMAN] upgraded lib32-libdbus (1.8.0-1 -> 1.8.2-1)
[2014-06-06 14:09] [PACMAN] upgraded libsystemd (212-3 -> 213-5)
[2014-06-06 14:09] [PACMAN] upgraded libatasmart (0.19-2 -> 0.19-3)
[2014-06-06 14:09] [PACMAN] upgraded libgdata (0.15.0-1 -> 0.15.1-1)
[2014-06-06 14:09] [PACMAN] upgraded libinput (0.1.0-1 -> 0.2.0-1)
[2014-06-06 14:09] [PACMAN] upgraded libmms (0.6.2-1 -> 0.6.4-1)
[2014-06-06 14:09] [PACMAN] upgraded libproxy (0.4.11-2 -> 0.4.11-3)
[2014-06-06 14:09] [PACMAN] upgraded libpurple (2.10.9-1 -> 2.10.9-2)
[2014-06-06 14:09] [PACMAN] upgraded libxcursor (1.1.14-1 -> 1.1.14-2)
[2014-06-06 14:09] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-06-06 14:09] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Starting build: 3.14.5-1-ARCH
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [resume]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Starting build: 3.14.5-1-ARCH
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [resume]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2014-06-06 14:10] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-06-06 14:10] [PACMAN] upgraded linux (3.14.4-1 -> 3.14.5-1)
[2014-06-06 14:10] [PACMAN] upgraded linux-headers (3.14.4-1 -> 3.14.5-1)
[2014-06-06 14:10] [PACMAN] upgraded mercurial (3.0-1 -> 3.0.1-1)
[2014-06-06 14:10] [PACMAN] upgraded net-snmp (5.7.2.1-2 -> 5.7.2.1-3)
[2014-06-06 14:10] [PACMAN] upgraded perl-io-tty (1.11-1 -> 1.11-2)
[2014-06-06 14:10] [PACMAN] upgraded perl-xml-parser (2.41-4 -> 2.41-5)
[2014-06-06 14:10] [PACMAN] upgraded postgresql-libs (9.3.4-1 -> 9.3.4-2)
[2014-06-06 14:10] [PACMAN] upgraded postgresql (9.3.4-1 -> 9.3.4-2)
[2014-06-06 14:10] [PACMAN] upgraded python2-setuptools (3.6-1 -> 4.0.1-1)
[2014-06-06 14:10] [ALPM-SCRIPTLET] Redis starts from redis user by default. Check redis.service file
[2014-06-06 14:10] [PACMAN] upgraded redis (2.8.9-1 -> 2.8.10-1)
[2014-06-06 14:10] [PACMAN] upgraded rrdtool (1.4.8-3 -> 1.4.8-4)
[2014-06-06 14:10] [PACMAN] upgraded rygel (0.22.1-1 -> 0.22.2-1)
[2014-06-06 14:10] [PACMAN] upgraded smbclient (4.1.7-1 -> 4.1.8-1)
[2014-06-06 14:10] [PACMAN] upgraded systemd (212-3 -> 213-5)
[2014-06-06 14:10] [PACMAN] upgraded subversion (1.8.9-1 -> 1.8.9-2)
[2014-06-06 14:10] [PACMAN] upgraded systemd-sysvcompat (212-3 -> 213-5)
[2014-06-06 14:10] [PACMAN] upgraded xfconf (4.10.0-3 -> 4.10.0-4)
[2014-06-06 14:10] [PACMAN] upgraded youtube-dl (2014.06.02-1 -> 2014.06.04-1)
Last edited by jan1024188 (2014-06-06 13:54:27)

Try downgrading libxcursor back to 1.1.14-1
There are several posts here about segfaults being caused by the upgrade libxcursor (1.1.14-1 -> 1.1.14-2)
The first few results of a search for libxcursor will give more details.
e.g.
https://bbs.archlinux.org/viewtopic.php?id=182343
https://bbs.archlinux.org/viewtopic.php?id=182464
Last edited by bhrgunatha (2014-06-06 14:16:42)

UTL.MAIL error ORA-29279: SMTP permanent error: 501 Address Syntax Error in

Hi,
I am new to the forum so please excuse if I post incorrectly without conforming to the standards.
We need to send mails using the UTL.MAIL package and have installed them on the database.
Whenever I am trying to send an email I am getting the following error:
ERROR at line 1:
ORA-29279: SMTP permanent error: 501 Address Syntax Error in
[email protected]
ORA-06512: at "SYS.UTL_MAIL", line 654
ORA-06512: at "SYS.UTL_MAIL", line 671
ORA-06512: at line 2
The test code which I am running is as follows:
BEGIN
UTL_MAIL.send(sender => 'test <[email protected]>',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
I have tried different combinations:
BEGIN
UTL_MAIL.send(sender => 'test "<[email protected]>"',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
even tried
BEGIN
UTL_MAIL.send(sender => '[email protected]',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
Everytime I am getting the same error.
This seems to be working with an exchange mail server but never on the SMTP server.
In the SMTP server logs the sender address is not having the angular brackets <> unlike the other mails which are being sent over.
It seems that the SMTP server is pretty strict and the SMTP admin will not change any settings on the server.
The oracle version is as follows
Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Could you please help me out with a solution.
Some how the angular brackets are geting stripped off (which UTL MAIL package generally does), Is there any way in which I can include the angular brackets.
Edited by: 984757 on 29-Jan-2013 02:56
Edited by: 984757 on 29-Jan-2013 02:57

I dislike UTL_MAIL - clunky and poor abstraction interface, and not well written.
Had a look at the code. It does this:
WHILE (ALL_RCPTS IS NOT NULL) LOOP
UTL_SMTP.RCPT(MAIL_CONN,'<' || GET_ADDRESS(ALL_RCPTS) || '>');
END LOOP;The GET_ADDRESS() function process the ALL_RCPTS parameter, returns the 1st address from it, and updates the (in/out) parameter with the remaining string.
SQL> var address varchar2(200);
SQL> exec :address := '<[email protected]>,[email protected]';
PL/SQL procedure successfully completed.
SQL> exec dbms_output.put_line( 'get_address='||UTL_MAIL.GET_ADDRESS(:address)||' address='||:address );
get_address=[email protected] address=[email protected]
PL/SQL procedure successfully completed.
SQL> exec dbms_output.put_line( 'get_address='||UTL_MAIL.GET_ADDRESS(:address)||' address='||:address );
get_address=[email protected] address=
PL/SQL procedure successfully completed.
SQL> The address is explicitly surrounded by brackets as per the RFC. So that is what your SMTP server should see.
If not - perhaps then our UTL_MAIL versions do not match. Cannot recall from what version I pulled and unwrapped the UTL_MAIL package code I have.
Personally though, I've ceased using UTL_MAIL a while back. It lacks in may respects. I have written my own mail package that supports multiple attachment, complex Mime formatting, attachments of 20+ MB in size, and so on - running on the UTL_SMTP interface (that provides the transport layer for sending mail). And for issues like you are facing, I suggest considering using UTL_SMTP directly.
Edited by: Billy Verreynne on Jan 29, 2013 12:52 PM
(Updated the code with HTML entity names to get the code snippet to render correctly)

No address record error during installation

Definitely new to linux
I'm following the beginners' guide. I've got to the point in which I Select Packages and get the error:
Packman preparation failed!
Check /dev/tty7 for errors
When I check /dev/tty7 I see:
Using mirror: ftp://mirrors2.kernel.org/archlinux/$repo/os/x86_64
[LOG] 2011-05-12 13:19:08 *** Executing worker runtime_packages
[LOG] 2011-05-12 13:19:08 *** Executing worker package_list
: : Synchronizing package databases...
error: failed retrieving file 'core.db.tar.gz' from mirrors2.kernel.org : No address record
error : failed to update core (No address record)
error : failed synchronizing any databases
So I've been searching the forum for the last couple of hours. I've pinged google and the mirror successfully several times so I think my network settings are all gravy. What I see is that the mirror address has been changed from what I typed in. I typed: "http://mirrors2.kernel.org/archlinux/core/os/x86_64" and when it runs "core" is changed to "$repo"
This is the only thing I can find, and I have no idea how to keep this from happening. Any help would be very much appreciated!

lilsirecho wrote:
Perhaps there is a missing element in the mirror selection.
Thus: from /etc/pacman.d:
Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/$arch
#Server = ftp://lug.mtu.edu/archlinux/ftpfull/$repo/os/$arch
The install procedure for dual .iso provides a long list of mirrors and locke is near the bottom.
I installed recently using the above FTP install with no difficulty.
The mirror you used worked just great for me! It's also convenient because suu isn't very far from me at all.
I'm now not really sure what was wrong earlier. It looks like it's just the mirror I chose, though I restarted the installation since posting and may have done something differently when setting up the network.
Thanks though! I can't wait to see what arch is all about!

Resman error: VXI A24 address allocation error on bus 0

When we execute resman.exe on our test system the following error occurs:
VXI A24 address allocation error on bus 0
We have the MXI Controller configured the same as other systems and our configuration is a pc and two VXI chassis. Anyone have any ideas on what could cause this error?

Hi Jim,
I do not immediately know the solution to the problem you are seeing, but have a few troubleshooting suggestions:
1. Check the pins on all of your MXI-2 connectors. If the cable
has damaged pins which cannot be bent back to place, you will want to
replace the cable.
2. Try a single VXI chassis, and then the other. If the problem
occurs with each chassis individually, then it is likely an issue with
the PC or cabling.
3. If the problem only occurs with one of the chassis in step 2, remove
all instruments from the chassis and try running resman again. If
this solves the problem, add your instruments back one at a time to
isolate which instrument could be causing problems.
4. If the problem occurs with both chassis in step 2, do you have another PCI-MXI-2 that you could try?
Let us know the results of your troubleshooting, and we'll be happy to help you out further.
Jason S.
Applications Engineer
National Instruments

ADC Microport address write error

Hi everyone,
I am trying to learn how to use the IF RIO PCI 5640 for a project in my class. I have been able to run the first tutorial (single tone output) and it works just fin. Problems arose when I ran the second project, based on the available 'analog input and output' template. At first the FPGA interface pallete was missing from the functions menu. A reinstallation of the drivers and the FPGA module solved this.
I followed all the instructions given in this tutorial: http://digital.ni.com/manuals.nsf/websearch/1F9D087D7EA6E58F862572C80078C0A2, but now I get this error when I try to run the host vi: "ADC Microport address write error". I am not sure what I am doing wrong. Any help/suggestions would be greatly appreciated.
Thank you,
Vasile

Hello Vasile,
As you may have noticed already, that version of the getting started manual has been removed from the web and replaced with this one. There were obviously issue with the previous version, which you found out. Hopefully this new version provides no problems but please post back if you find anything wrong and we can investigate and make any necessary revisions/workarounds if needed. Thanks for posting on the IF-RIO forums!
Chris W

Not able to do PO Change in SRM 5.0 getting error Messages

Hi ,
User having PO change role is getting following error message , while trying to add Amount to the PO in SRM 5.0 Extended Classic Scenario.
System Status INCM is Active (PO xxxxxxxxxxx)
Where to check in PO in bbp_po_get_detail or BBP_PD ????
Contract Expired: Taget Value xxxxxxxx of Contract Item exceeded
Where to check in contract in bbp_ctr_pd_ctr_getdetail or BBP_PD ????
The Sum of the distribution quantities must equal to XXXXXX
Where to check ???
Please mail me in detail , Answers will be rewarded.
Thanks in Advance,
Gopal

Hi
Please ensure the the Professional user changing the PO is having sufficient Standard roles provided by SAP.
Please go through the following SAP OSS Notes, which will help ->
Note 1046269 - "The sum of the distributed quantities" error on PO
Note 982674 - Change PO quantity does not update account assign quantity
Note 1054044 - BBP_POC:- Professional Purchaser Unable to Change a PO
Note 998201 E-Sourcing Enterprise SRM Java Server 4.2 SP3 Release & Info
Note 998099 E-Sourcing Enterprise plus Contracts 4.2 SP3 Release & Info
Note 904382 Release note SRM server 5.5 Support Package 04
Note 782833 - Distribution of Qty, Vlu,% during PCard reconcilliation
Note 836774 - Incorrect price after contract assignment in SC and PO
Note 1025915 - Sometimes a dump after items where inserted in a PO
Note 850024 - Sum of percentages >99,9< smaller than 100 %
note 1036939 Availability tab is visible for local products.
Note 654367 Meaning of message "System status UVOL is active" is unclear
Note 505805 EBP: Invoice and account assignment
Do let me know.
Regards
- Atul

Email Address Change -- error message rec'd

I just changed my email address and now I'm having difficulty accessing iTunes. The error message says to be sure my computer allows cookies from iTunes. Sounds basic, but I don't know how to do this. Can anyone shed some light for me? Thanks.

Have you set up your email as a BIS account (you log onto a website to set up the BB accounts)?
or do you need to leave your PC and outlook and Desktop Redirector running all the time?
it sounds like an Outlook issue running in conjunction with a Antivirus/antispam program.....
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

After upgrading to Yosemite, Thunderbird does not recognize email addresses: "syntax error" in recipient address. Fix?

After upgrading to IOS Yosemite, Thunderbird will no longer send emails to the contacts in my history file that drops down when I "write" a new message. I continue to get a return response that there is a syntax error in the address field of the message although I have tried both my stored emails and manually typed email addresses. What has been changed and how do I recover the use of Thunderbird's great program?
By the way, how do I eliminate out of date email addresses from popping up and populating email responses rather than the most current ones that are in my contacts? I now have to type each one in separately as the default options that come up are many out of date.
Thanks much for your great work. Mozilla and Firefox are the best.

Did you find a solution to this issue? My mail server is doing the same thing. I've tried six migrations now, and have a couple of tickets open, but they all have issues. I have worked around all of them except the mail server problem.
I did some more digging; the problem appears to be that on a migrated server, it leaves all of your mail store in the old location, doesn't move it, and then doesn't appear to upgrade spam-assassin properly. The net effect is that the mail server gets the SMTP communication, tries to pass the message into spam assassin, and then it goes south.
I see errors like this littered in the logs:
Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed:
Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed: No such file or directory
Do you see anything similar?

SRM HR Org Structure - error in EBP User

We are on SRM 4.0 (EBP 5.) and have replicated our R/3 org structure. We run a nightly batch job that updates the org structure in SRM with any changes made in R/3. Some users are unable to use SRM due to not being replicated properly into SRM. When you view the org structure via PPOMA_BBP - Change Attributes Check there are two STOP signs - with the following error messages
STOP   BBP Error in EBP User xxxxx
STOP   HR/ALE Verteilung ist aktiv. Verteilen Sie die Benutzerdaten neu.
When I translated the German error message, it translated to
HR/ALE Distribution is active.
Redistribute the user data.
How do I redistribute the user data to correct the problem so the users can use SRM again?
Also, where can I change the german transaction into English.
Any assistance would be greatly appreciated.
Thanks
Jan Stover

Hi Jan,
     Follow these steps in R/3
1. Go To PA20. Check the Personal ID for the user for whom it shoots an error
2. Go To PFAL. You might have to use a variant for this transaction. Feed the User's Personal # and the target system.
This will push an IDOC from R/3 to SRM with the org data
     Follow these steps in SRM:
1. Go to SE38 and execute this report RBDAPP01
This report will process the incoming IDOC to the Org Structure in SRM
Regards,
Anand

Display Purchase Order in SRM 7.0 -workflow error

Hi SRM Gurus,
Hi Masa ,
Please check this thread,
I am having the same error
We are upgrading from SRM 3.0 to SRM 7.0.
while displaying purchase order
Cannot get process info; function BBP_PDH_WFL_APPROVAL_SIMULATE throws exception Workflow Not Found
PDO Layer error
PDO Layer error
No approval Workflow Found. Inform System Administrator.
I have configured the Workflow as Application controlled workflow only.(client wants to use the same workflow used in SRM 3.0). I got message Business object BUS 2203 modified
How to resolve this
Please give your inputs
Regards
G.Ganesh Kumar

Hi Ganesh,
I also encounter this error for purchase orders. How did you check the errors you encounter in business object BUS2201?
Please refer to below thread.
[SRM 7.0 Error in Display of Approval in Purchase Orders|SRM 7.0 Error in Display of Approval in Purchase Orders]
Would really appreciate your help.
Thank you.

PR to SRM- Shipment Address & INCM error

Similar Messages

Maybe you are looking for