PR transfer from R/3 to SRM with same number

We are transfering R/3 PR's to EBP. We want keep Number of Shopping card same as PR number in R/3
It is always picks up Internal Number range for the shopping card in SRM.
We have only kept external number assignment for shopping cart transaction type, then in SLG1 it gives error "Internal number range is missing for transaction type. Inform syst. admin"
Any other method to keep Number of Shopping card same as PR number in R/3?
Regards,
NNK
Edited by: Nitin Khajindar on Apr 23, 2008 5:53 PM

Hi,
We are using the SRM 5.0 with PPS ( Procurement for public sector) industry specific component. We transfer the PR's from ECC to SRM and we have same number in the both the systems.
PR number in ECC is the SRM shopping cart number may be this is public sector sector specific functinality but this is available in SRM 5.0
Send me your information, I can send you my configuration print screens to you.
Thank you
Sreedhar Vetcha

Similar Messages

  • I'm moving from a iPhone 4S to an iphone 5s but and I'm changing SIM card with same number but I want to make sure that all my pictures go onto my new phone how can I do that?

    I'm moving from a iPhone 4S to an iphone 5s but and I'm changing SIM card with same number but I want to make sure that all my pictures go onto my new phone how can I do that?

    Hello Bethanygrace_m7,
    Thank you for contacting Apple Support Communities. You can take a look at this article about transferring content from your old iPhone to a new one:
    Transfer content from an iPhone, iPad, or iPod touch to a new device
    http://support.apple.com/kb/HT2109
    Here is another thread from the Communities about migrating data from an old iPhone to a new one:
    Migrating data from old to new iPhone?: Apple Support Communities
    https://discussions.apple.com/thread/2038778
    Regards,
    Jeff D.

  • Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

    Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

    there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

  • How can i export the data to excel which has 2 tables with same number of columns & column names?

    Hi everyone, again landed up with a problem.
    After trying a lot to do it myself, finally decided to post here..
    I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
    It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
    Because both the tables have same number of columns & column names.
    Below are 2 tables with column names:
    Table-1 (MONTHLY_PART_1)
    Table-2 (MONTHLY_PART_2)
    SL_NO
    SL_NO
    COMP
    COMP
    DUE_DATE
    DUE_DATE
    U-1
    U-1
    U-2
    U-2
    U-4
    U-4
    U-20
    U-20
    U-25
    U-25
    Since both the tables have same column names, I'm getting the following error :
    Error 402 at line 103, column 4
      alias required in SELECT list of cursor to avoid duplicate column names.
    So How can i export the data to excel which has 2 tables with same number of columns & column names?
    Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
    Help me with this please.
    Thank You.

    You'll have to *alias* your columns, not prefix it with the table names:
    $[CHE_TEST@asterix1_impl] r
      1  declare
      2    cursor cData is
      3      with data as (
      4        select 1 id, 'test1' val1, 'a' val2 from dual
      5        union all
      6        select 1 id, '1test' val1, 'b' val2 from dual
      7        union all
      8        select 2 id, 'test2' val1, 'a' val2 from dual
      9        union all
    10        select 2 id, '2test' val1, 'b' val2 from dual
    11      )
    12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
    13      from data a, data b
    14      where a.id = b.id
    15      and a.val2 = 'a'
    16      and b.val2 = 'b';
    17  begin
    18    for rData in cData loop
    19      null;
    20    end loop;
    21* end;
      for rData in cData loop
    ERROR at line 18:
    ORA-06550: line 18, column 3:
    PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
    ORA-06550: line 18, column 3:
    PL/SQL: Statement ignored
    $[CHE_TEST@asterix1_impl] r
      1  declare
      2    cursor cData is
      3      with data as (
      4        select 1 id, 'test1' val1, 'a' val2 from dual
      5        union all
      6        select 1 id, '1test' val1, 'b' val2 from dual
      7        union all
      8        select 2 id, 'test2' val1, 'a' val2 from dual
      9        union all
    10        select 2 id, '2test' val1, 'b' val2 from dual
    11      )
    12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
    13      from data a, data b
    14      where a.id = b.id
    15      and a.val2 = 'a'
    16      and b.val2 = 'b';
    17  begin
    18    for rData in cData loop
    19      null;
    20    end loop;
    21* end;
    PL/SQL procedure successfully completed.
    cheers

  • More Table Blocks in 11g with same number of rows as in 9i

    I was using SQL performance analyzer to compare performance difference between 9i and 11g databases.
    For this purpose I generated a trace file in 9i database and used it to build STS in 11g database.
    After runing two trials and comparison the report showed performance regression (comparing "buffer gets") while using following SQL statement
    *"SELECT * FROM EMP";*
    There were total 14 rows in emp table in both databases( i.e 9i and 11g)
    There was no plan change for above SQL statement in 11g database but still there was performance regression in 11g.
    After querying dba_tables view for number of blocks in emp table on both sides i found that EMP table in 9i database had 1 block where as in 11g emp table had 5 blocks (Even after using alter table emp move;)
    I am unable to understand why emp table has more number of blocks in 11g with same number of rows as in 9i emp table?

    user8916506 wrote:
    Below query was executed in 9i database.
    SQL> select extent_management,initial_extent,allocation_type from dba_tablespaces where tablespace_name='SYSTEM';
    EXTENT_MAN INITIAL_EXTENT ALLOCATIO
    LOCAL 65536 SYSTEM
    Results shows that SYSTEM tablespace in 9i database is locally managed.
    Where as results of below query from 11g database is indicating that users tablespace in 11g is also locally managed.
    SQL> select extent_management,initial_extent,allocation_type from dba_tablespaces where tablespace_name='USERS';
    EXTENT_MAN INITIAL_EXTENT ALLOCATIO
    LOCAL 65536 SYSTEMGood to see that you also picked up the allocation_type at the same time.
    So you have shown that the discrepancy between 9i and 11g isn't down to the difference in extent management.
    Are there any other differences between the tablespaces when you compare 9i system with non-system, and 9i system with 11g non-system ? (Hint - we have an anomaly with space allocation.)
    Regards
    Jonathan Lewis
    http://jonathanlewis.wordpress.com
    Author: <b><em>Oracle Core</em></b>

  • Create Equipment with same Number rang at Diff Equipment Catagory

    Hallo Guys,
    client bymistake created some equipments which are actually PRT with catagory M ( Machine)
    now they made deletion indicator to that and inactive the part and now want to create same machine as a PRT with same number range interval
    as that of made at machine, but as per std system is not allowing to create duplicate records.
    How to achive this ?
    Regards,
    Rip

    If no Equipments were created after the Deleted Equipments then you may have an option.
    Tcode OIEN
    Go to Number range interval, Then the Current number  can be changed as under. Reduce this Current number by those many equipments. Then new equipments will have the same numbers of the deleted equipments
    You should do it in trial servers and if suits to you then you can decide to go ahead. You should be prepared to have filters in Selection-screes to avoid the DLFL INAC equipments appear in the reports
    Jogeswara Rao K

  • How to transfer one file to multi sap with same IDOC Type?

    Hi all!
    I need your help..
    My senario is tansfer one xml-file to multi-sap server
    with same IDOC type.
    IS it possible to transfer without BPM?
    I think that the way not using bpm is impossble,
    because the file is deleted by sender adapter.
    If I'm using BPM, how to design?
    I consider 'fork' or 'switch',
    but, I guess,
    Idoc is will be initialized by other branch at last step.
    I hope good information.
    Regards.

    Hi,
    you can create using BPM .
    IR
    you need to create source for one interface and trager for two differnent interfaces.
    suppose if you are doing message mapping in message tab source is one interface targer is multiple interface..so that source can map multiple interfaces...
    create the Interface mapping one source two are target interfaces.
    Create the Integration proces...
    First step is receive step next use the Transformation Step that means source message it will conver two targets...then use the Fork step Recever Determination step goes to the first Send step..
    again drag the another receiver determination and use tge send step..close the FORK step.
    regards,
    venu.

  • 2012 R2 DC crashes after import Root CA from 2008 R2 DC/CA (with same name)

    Hello Everyone.
    We migrate a Windows Server 2008 R2 DC with Root CA to an Windows Server 2012 R2 DC with same IP and Computername on a new VM. The Windows Server 2012 R2 works fine before we import the Root CA Information from a Backup (http://technet.microsoft.com/en-us/library/ee126140(v=ws.10).aspx)
    After import the Root CA Information, we can´t rename any object, OU, user account, etc, whichever DC AD Users and Computers is pointing at, lsass.exe will crash and the DC will reboot after 60 seconds. Remove ADCS is no helping.
    Depromote DC and removing ADDS, reboot... and promote the W12R2 to DC is the same Problem. Now we delete (properly) the Server and reinstall the W12R2 OS and promote the Server to DC. After
    new install the rename any object works fine.
    Does anyone have an idea? Any help would be appreciated!
    Regards Achim

    Hi,
    Is there any detail error message?
    If the issue is related to CA, i would suggest that you may ask in:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=winserversecurity
    Regards.
    Vivian Wang

  • REPROCESSING AN IDOC WITH SAME NUMBER

    hi ppl,
    i hv sent an idoc to the inbound system with a  generated idoc number.
    and now i had added some fields fo the same idoc and have to resend  it to the same inbound system
    with the same IDOC NUMBER.
    how can we RESEND AN IDOC with SAME IDOC NUMBER.
    thanx very much...
    regards,
    RAVI.

    >
    ChakravarthiPonnam wrote:
    > with the same IDOC NUMBER.
    > how can we RESEND AN IDOC with SAME IDOC NUMBER.
    Was that IDOC ended with status 53? If so then I donu2019t think if you could able to edit the segments and reprocess straight forward.
    If that IDOC has been ended with Error then just edit this IDOC(WE02>Double click on segment then from menu "Data record>change") now the status has been change to 69. then just reprocess with BD87.
    NOW, if your IDOC has ended with 53 and you want to edit this then a minute work-around we have to do. Like first change the IDOC status from 53 to 69 then do the same like for error one,
    Cheers
    Amit.

  • Second sim with same number

    I use my phone a lot for work, and want to leave it permanently in the van, can I have a second sim on the same number ?

    Orange used to offer exactly this with their "Single Number" facility, but it was never opened up to EE users, and finally closed down at the back end of last year. For what it's worth, the only other network to have ever offered similar was Vodafone with "multi-SIM" but that never let you use data from the second SIM and closed many years ago. As others have suggested, a GSM-divert is now the closest you'll get. You could also use EE "pocket landline" with the "one to many" option if you want multiple phones to ring with incoming calls at the same time. Details at http://ee.co.uk/business/small/connecting-your-business/pocket-landline

  • Multiple contacts with same number?

    Hello,
    I have multiple contacts in my address book with the same number, for instance "Mom" or "Grandma" or "Mrs. Smith."  Is there a way to ensure that my iPhone 4 chooses the assigned photo and name to each contact? 
    I have all three under "All Contacts" but also have only one under a sub-group that is my primary contact group.  Perhaps my problem is syncing via MobileMe? Doing that means I have All Contacts as well as my sub-group on the iPhone; that may be confusing it?
    Thanks for any help!

    If you have multiple contacts have the same number the iPhone makes a random choice. There is no way to force one over another.

  • Transfer app from one account to another with same SKU number

    Hi,
    I want to transfer a application from one account to another and i get this error:
    You cannot transfer apps with a App product ID that is the same as a product ID used by the recipient's app.
    The Apple ID for both applications is different.
    The only thing in common in the SKU number which i have to admit, is poorly chosen for both apps - 01.
    I don't want to re-submit my apps so i can choose a new SKU number for one of them.
    Is there any way i can transfer them ?
    I think you should be able to choose a new SKU number when you transfer to another account because your app is going to belong in a new inventory.
    Thanks

    Found the answer today from Apple:
    "It is not possible to transfer an app that has an identical SKU/product ID to another app on the recipient's account. If you would like the app to be distributed on the App Store through this specific account, you will need to remove it from sale, delete it from the current account, and then upload it as a new app in the new account. Deleting the app will enable you to use the app name in the new account.
    When you move the app to the new account, you will disable current customers from receiving automatic and free updates of your app. Also, all customer reviews, rating, and ranking information will be reset.
    Deleting an app permanently removes the app and any associated In-App Purchases from iTunes Connect. After the app has been deleted, you won’t be able to reuse your app name and SKU. Also, if you have uploaded a binary or enabled the app for the iAd Network, you won’t be able to reuse your Bundle ID.

  • Could not transfer from one Mac to another with external hard drive

    Hello,
    I have a mid-2010 MBP 13". I just got a new external hard drive (seagate back up plus slim, 1TB). When it asked me, I chose to have it compatible with both Macs and PCs when I first got it and plugged it in.
    I was able to put my own file on it, give the hard drive to a friend who has a new Macbook Air (relatively new, not sure which edition), and she could transfer it onto her Mac, but could not put anything from her Mac to the hard drive.
    Any help?

    Exactly what is the format and how did you format it?  Did you use Disk Utility or did you format it on a PC?
    Ciao.

  • Stock transfer from 1 branch to another(with allocation of freight charges)

    Hi
    The clients scenario is: Its a Trading company. Head office is located at Delhi. All the material is purchased and received in general wharehouse. After that it is to be transfered to diffrent branches. All branches are marked as warehouse. During transfer freight is applicable. This freight is to allocate on item cost  CBM/Volume wise means inventory should get updated by Last purchase price+ freight allocated on item CBM/Volume wise.
    Standard inventory transfer does not have freight allocation provision.
    Rs 10,000(Suppose)= this is total lorry freight
    UDF lorry volume= 1000m3, so 1m3 will cost Rs 10.
    Now calculation:
    CBM/Volume of item=2m3(in master data)
    Qty during inventory transfer=3, so 6m3 is volume occupied by item in the lorry.
    So item freight should be 6m3*10Rs=Rs 60.
    Inventory should get updated by last price+freight applicable on item.
    How to handle this SAP B1?
    Thanks

    Hi
    U have to use Inventory Transfer with some UDFs then u can make Inventory revaluation..
    of
    Use GI and GR with some UDFS and FMS to do for these Process...
    THere is no other way in Default SBO.
    Giri

  • How do I stop my texts and pictures from going to other devices with same Apple ID

    I share my Apple ID with my son on his Ipad and I phone.  how do I stop my photos and messages from automatically going to his devices.

    It should be iMessages which are going from device to device, you can turn this off in recipient device. The same sort of thing for Photos, however on your phone/ipad you can turn off 'Photo Stream" which will stop the sending to other devices.  You can do this under Settings>Photos & Camera.
    Regards,
    Steve

Maybe you are looking for