PR was set 'closed ' after creating PO for this PRin SRM

HI:
Our R/3 lease is ECC5.0 and SRM is 5.0.We use Extented classic
scenairo.
We created a PR in R/3 and transferred into SRM.After going throgh
the process of bid invitation,quotation,PO was created.But I found
there was no PO for this PR have been created in R/3,and checked the PR
in R/3,the 'closed' indicator for this PR has been set.
does anyone can help me,thks

Hi,
Please check that the SC transfered to SRM does have subtype "EP" for ECS.
If not, your scenario is a standalone one : that's why the PO was not duplicated in R/3 and R/3 PR was closed.
Check BBP_PD transaction for BUS2121.
Kind regards,
Yann

Similar Messages

A connection was abortively closed after one of the peers sent an rst packet

Hello,
i have a dvr on netwoek that is wok fine. i tried to publish it over internet.
i have tmg with two wan connections(load Balancing) and two internal networks.
i create a server application rule and and but dvr protcols on it.
when i try to open it from outside it's not working. on tmg log it's give me this error:
A connection was closed because no SYN/ACK reply was received from the server.
also with others dvr i get this error:
a connection was abortively closed after one of the peers sent an rst packet
i tired to read all post on forums but i didn't get a solution for it.
please not that the network rule from internal to external is route and the publish rule is set to make the request is from local host.
so whats the problem?
thanks.

Hi,
Thank you for your post here.
As far as i know, if you would like to publish server located in internal, you need to set the relationship between internal and external as NAT.
Best Regards
Quan Gu

Receiving Error : Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. while trying to create a new Customer.

Hi All,
We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
Your help is appreciated!
Thanks in advance,
SKA

You can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks

POV-After creating Tcode for a table SM30 I want F4 Help here

Hi All,
After creating Tcode for a table, When I am trying to give table entries thro' this Tcode, I want F4 help for those fields. Apart form assigning "Fixed values" in Domain level how can I achieve this.
Points Assured.
Regards,
Suresh

Hi,
You need to create search helps based on this table for each filed or one for all the fields with proper import and export paramters. Or else you can give check table entries for each of the table fields for which you need the F4 help. Check table us assigned to a field using the Foriegn key assignment.
Best Regards,
Sesh

Please, 1. Please set the Receivables system options for this operating

hi
please i have this error:
1. Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
can some one help me!
thinks

think you a lot mister.
i am not the administrator of the base, our base administrator is not here for the moment, i have just the count apps and sqplus to change parameters.
and the request :
select fnd_profile.value('SO_ORGANIZATION_ID') from dual ;
gives as result : 101!
think you for all!.
Message was edited by:
brahim37

Help with Jsp: logic:iterate Cannot create iterator for this collection

Hello,
I am developing a jsp with struts. This is the snap of the code:
        <logic:iterate id="prod" collection="productList" >
          <tr align="center">
               <td><html:text property="prodDesc" size="50" indexed="true"/></td>
               <td>
                    <html:select property="prodUnit" indexed="true">
                         <option selected>-</option>
                        <OPTION VALUE='NMB'>NMB
                         <OPTION VALUE='TEN'>TEN
                         <OPTION VALUE='TPR'>TPR
                         <OPTION VALUE='GWH'>GWH
                    </html:select>
               </td>
               <td><html:text property="prodQty" size="20" indexed="true"/></td>
               <td><html:text property="prodVal" size="20" indexed="true"/></td>
          </tr>
        </logic:iterate>"productList" is defined as an array of Product[], "prod" is defined as a single Product object in the form. But when i run the page, it gives me this errors:
"javax.servlet.jsp.JspException: Cannot create iterator for this collection".
I also tried to make "productList" an ArrayList type, but it game me this same error.
We are using Websphere 4.0 with Struts 1.1.
Anyone can help?
Thanks a lot.
All the best,
warren

Hi , I have similar problem. wonder anyone can help me. I have a datastructure. ArrayList contains list of Hashtable; each Hashtable has two key-value sets ; for each key-value set , value is a ValueObject.
My jsp works ok. but when I click on the radio butten for one radio group, it sets not only the porperty on that row, but the rows belows ,which suppose to be another radio group , because I am using indexed="true". each row should be a individual group seperated by the name poDisplayVO[i] , as show in the html generated .

<logic:iterate id="poDisplayVO"
name="testForm"
property="poDisplayVOList"
type="java.util.Hashtable">
<tr>
<td>
<bean:write name="poDisplayVO" property="name"/>
</td>
<td>
<% String val = ((java.util.Hashtable)poDisplayVO).get("subjAreaName").toString();%>
<html:radio indexed="true" name="poDisplayVO" property="fosVO.select" value="<%=val %>" />
<bean:write name="poDisplayVO" property="subjAreaName"/>
</td>
<td>
<html:radio indexed="true" name="poDisplayVO" property="fosVO.select" value="no" /> NO
</td>
<td>
<html:radio indexed="true" name="poDisplayVO" property="fosVO.select" value="yes" /> YES
</td>
</tr>
</logic:iterate>
<! ------------------------ html genterated ------------------------------------------------>
the HTML generated as folllows:
<tr>
<td>
          Accounting Studies
</td>
<td>
     <input type="radio" name="poDisplayVO[0].fosVO.select" value="Accounting">
          Accounting
</td>
<td>
     <input type="radio" name="poDisplayVO[0].fosVO.select" value="no"> NO
</td>
<td>
     <input type="radio" name="poDisplayVO[0].fosVO.select" value="yes"> YES
</td>
</tr>
<tr>
<td>
          Accounting Studies
</td>
<td>
     <input type="radio" name="poDisplayVO[1].fosVO.select" value="Bookkeeping">
          Bookkeeping
</td>
<td>
     <input type="radio" name="poDisplayVO[1].fosVO.select" value="no"> NO
</td>
<td>
     <input type="radio" name="poDisplayVO[1].fosVO.select" value="yes"> YES
</td>
</tr>
<tr>
<td>
          Accounting Studies
</td>
<td>
     <input type="radio" name="poDisplayVO[2].fosVO.select" value="Computerized Accounting(Duplicate)">
          Computerized Accounting(Duplicate)
</td>
<td>
<input type="radio" name="poDisplayVO[2].fosVO.select" value="no"> NO
</td>
<td>
<input type="radio" name="poDisplayVO[2].fosVO.select" value="yes"> YES
</td>
</tr>
<! ------------------------ action form-----------------------------------------------
public ArrayList getPoDisplayVOList() {
     return poDisplayVOList;
public void setPoDisplayVOList(ArrayList list) {
     poDisplayVOList = list;
public Hashtable getPoDisplayVO(int i) {
     Object obj = poDisplayVOList.get(i);
     if (obj == null)
          obj = new Hashtable();
          poDisplayVOList.add(obj);
     return (Hashtable)poDisplayVOList.get(i);
public void setPoDisplayVO(Hashtable programDisplayVO, int i) {
          poDisplayVOList.add(i, programDisplayVO);
     }

I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS. I heard there was a plug-in to download for this, but cannot find it. Help?

I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS. I heard there was a plug-in to download for this, but cannot find it. Help?

You would need at least CS3 with ACR 4.6 to natively edit NEFs from a D90 in PS:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
It might also work to use the DNG Converter 4.6 or newer to convert the NEF files to DNGs and then those might open in your older CS2 ACR, but I’m not sure, since it’s a 9 year old program I haven’t used in years.
The DNG Converter can be found, here:
http://www.adobe.com/downloads/updates.html

I have an existing ipod that I use with my mac. I am trying to connect an additional ipod to it but when I try and register, it just brings up the existing info. I don't want to lose the original info or library - just create new for this device. Pls help

I have an existing ipod that I use with my mac. I am trying to connect an additional ipod to it but when I try and register, it just brings up the existing info. I don't want to lose the original info or library - just create new for this device. Pls help...

We are starting from the beginning like its a new ipod starts out asking language, country,location services,choose a network,and when we get to "setup ipod touch " there are 3 options 1..setup as new ipod, 2.restore from ipod backup 3 restore from itunes backup and when we hit setup as new ipod and click next it comes up with sign in with apple id or create a free apple id we clicked create a free apple id....then comes up with bday,1st name last name, use your current email address, get a free icloud email address or change email address and THIS is where we have problems....if we hit change email address it means that sis's stuff goes under his name and moves all her stuff to this older ipod which the brother does not want. sorry this is so long but its the only way I knew to do it.

ServletException: Cannot create iterator for this collection

hi,
i am using struts action class with struts tags to display
data in jsp page.
in struts class i am return arraylist ,
same list i am displaing in jsp.
if Arraylist have data ,i am not getting error.
but if arraylist empty ,i am getting ServletException: Cannot create iterator for this collection
<logic:iterate id="result" name="fileList" >
<td><bean:write name="result" property="fileName"/></td>
</logic:iterate
can any one help how to avoid this exception?
thanks
siav

You could use <bean:size> to get the size of the list
and conditionally execute the logic:iterate,
something like this :
That will work, but not necessary. If the collection is empty, the iterate tag just skips - it doesnt throw an exception (tested)
The problem I guess is that the bean with the specified name is not a Collection. It may be a property of the bean that is a collection in which case the tag should have a property attribute.
ram.

Syntax Error after creating enhancements for subroutine

Problem:
Creating enhancement sections gives a syntax error when creating enhancement options and implementations for a subroutine and then ceating enhancement options and implementations for the call to that same subroutine.
<p>
Syntax Error:
"Different number of parameters in FORM and PERFORM (routine: SET_LAYOUT, number of formal parameters: 2, number of actual parameters: 1)
</p>
<p>
Here's the following scenario:
</p>
<p>
A subroutine is defined in a program.
The subroutine is called within the same program.
</p>
<p>
I then executed these steps:
<br>     1. Defined an enhancement section around the subroutine definition
<br>     2. Defined an enhancement section around the subroutine call.
<br>     3. Implemented the enhancement section around the subroutine definition and add an additional parameter.
</p>
<p>
     Currently, this gives a syntax error as expected, since the call to the subroutine needs 1 more parameter.
</p>
<p>
     4. Implemented the enhancement section for the subroutine call. I change the call in the implementation so it passes the new parameter.
</p>
<p>
A syntax check to this gives an error. The syntax checker is not only checking the new implementation, but also the original subroutine that should have been overwritten.
</p>
<p>
The enhancement sections use the same enhancement spot, and the enhancement implementations use the same implementation.
</p>
<p>
I tried various combinations of using different enhancement spots and/or implementations, but all give the same syntax error. I tried separating the subroutine in a different include and retried my testing, but it still gave the same syntax error.
</p>
<p>
Here's the sample code I first created to try troubleshooting the problem:
</p>
<p>
<pre>
ENHANCEMENT-SECTION ZEP_Z_MICHAEL_02 SPOTS ZES_Z_MICHAEL .
     PERFORM set_layout
          CHANGING
          wa_layout.
END-ENHANCEMENT-SECTION.
$$-Start: ZEP_Z_MICHAEL_02----
$$
ENHANCEMENT 2 ZEI_TEST_SECTIONS.
     "inactive version
     PERFORM set_layout
     using 'X'
          CHANGING
          wa_layout.
ENDENHANCEMENT.
$$-End:   ZEP_Z_MICHAEL_02----
$$
ENHANCEMENT-SECTION ZEP_Z_MICHAEL_01 SPOTS ZES_Z_MICHAEL STATIC .
FORM set_layout
CHANGING p_wa_layout TYPE slis_layout_alv.
p_wa_layout-zebra = 'X'.
wa_layout-no_colhead = 'X'..
p_wa_layout-colwidth_optimize ='X'.
wa_layout-window_titlebar = 'Woot'.
ENDFORM. "set_layout
END-ENHANCEMENT-SECTION.
$$-Start: ZEP_Z_MICHAEL_01----
$$
ENHANCEMENT 1 ZEI_TEST_SECTIONS.
     "inactive version
FORM set_layout
using p_test type boolean
CHANGING p_wa_layout TYPE slis_layout_alv.
p_wa_layout-zebra = 'X'.
wa_layout-no_colhead = 'X'..
p_wa_layout-colwidth_optimize ='X'.
wa_layout-window_titlebar = 'Woot'.
ENDFORM. "set_layout
ENDENHANCEMENT.
$$-End:   ZEP_Z_MICHAEL_01----
$$
</pre>
</p>
<p>
Please let me know if you think I am doing something wrong.
</p>
<p>
Thanks, <br>
Mike
</p>
Edited by: Michael Herman on Mar 8, 2010 8:11 PM

Yes, Sandra. That is what did and it worked with no syntax errors!
I'm not sure if this is getting off topic or not, but the SAP documentation(taken from the SAP help after pressing F1 on the keyword static in ERP6) seems misleading:
"The STATIC addition is intended for the enhancement of data declarations, while the statement ENHANCEMENT-POINT without the STATIC addition is designed for the enhancement of executable coding."
I would think the enhancement section ZEP_Z_MICHAEL_02 would fall under the category of executable code, while the enhancement section ZEP_Z_MICHAEL_01 would fall under the category of declarative code.
Unfortunately, all the SAP enhancement sections I come accross are dynamic. The SAP help explains the reasoning for this:
"In contrast to the statement ENHANCEMENT-POINT, the addition STATIC of the statement ENHANCEMENT-SECTION can only be used with maximum caution for changes of data declarations, because a replacement and no completion is carried out. Especially application development within SAP should not use the addition STATIC at all with ENHANCEMENT-SECTION as the change will be active in the entire customer system. "
I do not know what the word "completion" means in the previous quote, so I can't determine why it would matter. Regardless, if a developer wanted to change a standard subroutine declaration, they would also have to mod an enhancement section to change it to static. This seems to defeat the purpose of using enhancements, but maybe this scenario is not what enhancements were intended for.

How to create workflow for this scenerio

HI Gurus,
I am new to workflow.
I have to create a workflow. But I have a problem what the object type I have to choose. It may be simple but i dont know do it.
Scenerio of the workflow given is...
This workflow gets pernr and benefit plan information from portal.
this workflow is a one step approval mail
In the workflow three steps are there.
In the first step i have to derive basic hourly salary of the person by using infotype --- 008 and company code for the pernr from the 0001 and benefit plan he enrolled
Second step ---
there are two company codes, I have to use condition step,
if one company code I have to send to one hr department mail for approval
and the other for another hr department step.
in the workitem i have to pass salary information, pernr information.
third step, after approval I have to update the respective infotype.
My question is for the above scenerio, what object type I have to use.
For the first step is there any method I have to create which calls function module.
if so for which object type i have to add method.
third how do I create the workflow container for this.
I am new to workflow. Please help me friends.
Ravi

I think you should create your own Business Object or you can refer to Business Object EMPSALPACK.
Now Company Code should be an Attribute that you should do the Coding For.
Use this attribute in the Condition Step of Workflow Template.
Workflow Container will contain the Business Object that you will be creating. The Business object should have Key Field Pernr and may be anything relevant that you will do for Coding. I think you might have to trigger the Event of the Business Object through code.
Check the Code below.
<b>Reward Appropriate Point if useful</b>
INCLUDE <cntn01> .
DATA:i_emp_details TYPE STANDARD TABLE OF p0001, "Employee Details
       wa_request    TYPE p0001,                    "Workarea for Employee details
       v_country_grp TYPE molga,                    "Country SubGrouping
       v_object_key TYPE sweinstcou-objkey.        "Key for the buisness object ZWOBUSTRIP
CONSTANTS: c_bo_trip     TYPE swo_objtyp VALUE 'ZWOBUSTRIP',
             c_event_trip TYPE swo_event VALUE 'TripCreate',
             c_infy_type_1 TYPE infty      VALUE '0001'.
Event Container declaration
swc_container i_event_cont.
swc_create_container i_event_cont.
Reading the INFO TYPE 0001 to obtain the
Employee details
CALL FUNCTION 'HR_READ_INFOTYPE'
    EXPORTING
      pernr           = i_emp_number
      infty           = c_infy_type_1
      begda           = sy-datum
      endda           = sy-datum
    TABLES
      infty_tab       = i_emp_details
    EXCEPTIONS
      infty_not_found = 1
      OTHERS          = 2.
SY-SUBRC check is not required as the error
handelling will be done by WorkFlow rule
resolution.
CLEAR wa_request.
READ TABLE i_emp_details INTO wa_request INDEX 1.
IF sy-subrc = 0.
Retrieving the Country SubGrouping for the employee
    SELECT SINGLE molga
      FROM t001p
      INTO v_country_grp
     WHERE werks = wa_request-werks
       AND btrtl = wa_request-persk.
ENDIF.
Sending the relevant data to event container
swc_set_element i_event_cont 'EmpId'     i_emp_number.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'PersonnelArea'    wa_request-werks.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'CountryGrouping' v_country_grp.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'EmpSubGrp'       wa_request-persk.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'EmpTripId'       i_emp_trip.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
Raising the event to trigger the workflow
v_object_key = i_emp_number.
CALL FUNCTION 'SWE_EVENT_CREATE'
    EXPORTING
      objtype           = c_bo_trip
      objkey            = v_object_key
      event             = c_event_trip
    TABLES
      event_container   = i_event_cont
    EXCEPTIONS
      objtype_not_found = 1
      OTHERS            = 2.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
COMMIT WORK.
ENDFUNCTION.
Thanks
Arghadip

How to create workflow for this simple scienerio

HI Gurus,
I have to create a simple workflow. But I have a problem what the object type I have to choose.
Scenerio of the workflow is ..
This workflow gets pernr and benefit plan information from portal.
this workflow is a one step approval mail
In the workflow three steps are there.
In the first step i have to derive basic hourly salary of the person by using infotype --- 008 and company code for the pernr from the 0001 and benefit plan he enrolled
Second step ---
there are two company codes, I have to use condition step,
if one company code I have to send to one hr department mail for approval
and the other for another hr department step.
in the workitem i have to pass salary information, pernr information.
third step, after approval I have to update the respective infotype.
My question is for the above scenerio, what object type I have to use.
For the first step is there any method I have to create which calls function module.
if so for which object type i have to add method.
third how do I create the workflow container for this.
I am new to workflow. I know scenerio is simple but I dont know how to do it.
Please help me friends.
Ravi

think you should create your own Business Object or you can refer to Business Object EMPSALPACK.
Now Company Code should be an Attribute that you should do the Coding For.
Use this attribute in the Condition Step of Workflow Template.
Workflow Container will contain the Business Object that you will be creating. The Business object should have Key Field Pernr and may be anything relevant that you will do for Coding. I think you might have to trigger the Event of the Business Object through code.
Check the Code below.
<b>Reward Appropriate Point if useful</b>
INCLUDE <cntn01> .
DATA:i_emp_details TYPE STANDARD TABLE OF p0001, "Employee Details
wa_request TYPE p0001, "Workarea for Employee details
v_country_grp TYPE molga, "Country SubGrouping
v_object_key TYPE sweinstcou-objkey. "Key for the buisness object ZWOBUSTRIP
CONSTANTS: c_bo_trip TYPE swo_objtyp VALUE 'ZWOBUSTRIP',
c_event_trip TYPE swo_event VALUE 'TripCreate',
c_infy_type_1 TYPE infty VALUE '0001'.
Event Container declaration
swc_container i_event_cont.
swc_create_container i_event_cont.
Reading the INFO TYPE 0001 to obtain the
Employee details
CALL FUNCTION 'HR_READ_INFOTYPE'
EXPORTING
pernr = i_emp_number
infty = c_infy_type_1
begda = sy-datum
endda = sy-datum
TABLES
infty_tab = i_emp_details
EXCEPTIONS
infty_not_found = 1
OTHERS = 2.
SY-SUBRC check is not required as the error
handelling will be done by WorkFlow rule
resolution.
CLEAR wa_request.
READ TABLE i_emp_details INTO wa_request INDEX 1.
IF sy-subrc = 0.
Retrieving the Country SubGrouping for the employee
SELECT SINGLE molga
FROM t001p
INTO v_country_grp
WHERE werks = wa_request-werks
AND btrtl = wa_request-persk.
ENDIF.
Sending the relevant data to event container
swc_set_element i_event_cont 'EmpId' i_emp_number.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'PersonnelArea' wa_request-werks.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'CountryGrouping' v_country_grp.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'EmpSubGrp' wa_request-persk.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
swc_set_element i_event_cont 'EmpTripId' i_emp_trip.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
Raising the event to trigger the workflow
v_object_key = i_emp_number.
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
objtype = c_bo_trip
objkey = v_object_key
event = c_event_trip
TABLES
event_container = i_event_cont
EXCEPTIONS
objtype_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
No Processing needed.
ENDIF.
COMMIT WORK.
ENDFUNCTION.
Thanks
Arghadip

I changed my mind after selecting "never for this site" and now want to save a password.

I declined to save a password by selecting "never for this site" the first time I went to the site. Now, I want Firefox to remember the password. I can not find a way to a add or save the password. Can you help?

If you choose Never then Firefox creates an exception.<br />
You can remove that site from the exceptions:
Tools > Options > Security: Passwords: Exceptions
See also:
* [[Remembering passwords]]
* http://kb.mozillazine.org/User_name_and_password_not_remembered

BUG: Search not avail after adding song to playlist (after creating folder for playlists) - iPad app

So this sounds like an unlikely bug, but I can duplicate it again and again.Starting point: Lots of playlists, no folders. I have the latest iOS version on my iPad and the latest Spotify update.Used PC client to create a folder and moved some playlists to that folder.Back on iPad, search for song and then add it to any playlist. (It doesn't matter which playlist, whether it's in a folder or not.)Here's where the problem occurs: After adding a song to a playlist, it is no longer possible to search for other songs. The search function simply fails to respond. I can listen to songs on playlists but can't use the search. If I want to search, I have to restart the app. Annoying!

If you have "Keep..." and "Copy..." unchecked, iTunes will simply reference the existing file, and will not change your file structure, as you correctly note.
I'm fairly sure that some other program is operating on your files. The "Playlists" folder that you mention has nothing to do with iTunes. On my PC, only Windows Media and Roxio use it.
To your question +"Is there a way to have iTunes rename/move files when adding to its library to specific folders via custom rules based on ID3 information (i.e. WMP rip settings)?"+ the answer is no. When iTunes rips a CD, it names the files as track number and title, with no option to do differently. And as far as placing the ripped files, they go in Artist/Album, with no option to do differently. As full-featured ripping programs go, iTunes is not even in the race.

Itunes wont reinstall because the apple support isnt there. I was missing DLL after last update for itunes to work and now it wont reinstall...icloud, iphone, ipad info now not available and this is affecting my work

help

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

PR was set 'closed ' after creating PO for this PRin SRM

Similar Messages

Maybe you are looking for