PR  with reference to requirement plan

Hi Friends,
I have created two  requirement plan in MD61 for five finished products. After MRP run i get PR for respective raw materials. I want to see that which PO is created for which requirement plan. If it is possible to do goods receipt with reference to respective requirement plan?
How can i find it?
Edited by: kiran ghule on Mar 24, 2009 4:31 PM

Hi Kiran,
You can get reference to PR in PO, but not Requirement plan in the PO.
And it is not possible to do goods receipt with reference to respective requirement plan.
Basically you can trace by date on which the PIR is created and with PR, PO dates.
Regards,
Keerthi.

Similar Messages

  • Invoice Correction Request with reference to Billing plan

    Dear SDN frnds,
    I'm having one query in Invoice Correction Request (ZBOC) creation,
    While creating with reference to billing document of billing plan type (ZCI), the net value in Invoice Correction Request is '0' and the net value is not modifiable during any correction done in quantity (L2N) debit, the net value still remains '0' and it is greyed.
    It should get modified!!!
    My configuration in copy control from Billing document (ZCI) to Sales document (ZBOC)
    Header level :
    DataT: 052 - Billing doc. header                           Copy requirements: 021 - Billing header
                                                                             Copy item no. activated
    DataT: 103 - Billing business header data
    DataT: 003 - Billing header partner
    Item level :
    DataT: 153 - Item from billing document                Copy requirements: 303 - Billing header
                                                                             Copy item no. activated
    DataT: 104 - Billing business item data                 Pricing type - E
                                                                             2nd Pricing type - F
    DataT: 004 - Billing item partner                           X - Update document flow
    Billing plan - 402 - Billing plan
    Kindly resolve my issue............
    Best Regards,
    Giridharan (Mumbai)

    Dear Sagar,
    I have selected 'E' in Pricing type in Item category, I didn't make any changes here (Credit memo item in order, Copy control Bill to sales order) and 'M' in 2nd pricing type in Item category, (Debit memo item in order,  Copy control Bill to sales order). Still it didn't worked out.
    Kindly reply me your views and suggestions.
    Thanks for your support.
    Best Regards,
    M. Giridharan
    Edited by: Giridharan Manokaran on May 18, 2009 11:36 AM

  • Creating a planned order with error "Material requires configuration"

    Dear All,
    I am facing a problem for creation of a planned order with error "Material requires configuration".
    To follow the note 180317, I change Account Assignment Category to "U" (Unknown).
    However, the system still does display the same error.
    Could you please help provide possible solution for this?
    Regards,
    Phong

    See also the following blog post:
    Configurable planned order for material variants: Exception "53: No BOM explosion due to missing configuration"
    BR
    Caetano

  • Req Deliv. Date required on order create VA01 Copy with Reference to Quote

    When creating an order with reference to a quote, the screen allows Req Deliv Date entry. I would like to make this field mandatory on the window 'Create with Reference'. Program is SAPLV45C and the screen is not certain: could be 0100, 0301, 0302, 0303, 0900.
    Have been looking at maintenance via SE51, but not sure if any of the element characteristics translate into 'required' so user is unable to click "Copy" if the date is without a value.
    Thank you.

    It is possible by changing the SAP standard.
    You can change the special attirbutes (Tick the checkbox in Req. field) in elements list of each screen which you have mentioned through SE51 transcation
    Regards,
    Udayasankar Rajagopalan

  • How to Run MRP with requirement Plan Number

    Dear all,
    I am working for the process of MRP Run .But customer requirement is that "To Run the MRP with requirement Plan Number"
    If you are aware of this scenario ,please provide the solution.
    Thanksin Advance

    Go to MD61
    Select the Radio Button Rqt Plan Number
    Write the plan number eg. "test1"
    now you get the next screen
    Here you can enter the materials like
    first line Testmat1 -qty 100   150 ....
    2nd line Testmat2 -qty 150    100
    like that
    So the difference between MD61 with Material and Rqt Plan number is
    Material means we give requirement for only one material
    But for Requirment plan number , w.r.t one Rqt Plan number we can maintain requirement for multiple material
    same material with same period we can maintain requitement for Different Requirement Plan number
    This is reducing effort of client of data entry and for different sales Regions for the same material through "Rqt Plan No" they can differentiate the rqt
    MRP run run it for PLANT or multiple plant with Scope of Planning
    thanks
    Pl award points if useful
    K.Prabakaran

  • Issue :PIR Demand release with internal requirement Plan number.

    Hi,
    I am facing Problem on demand release as a PIR with requirement plan number  from SCM to SAP R/3.
    when generating the requirement plan
    Requirement Plan number internally generating for each line items one plan number.
    Whenever releasing the demand from APO to R/3 , It should give only one requirement plan number for that batch , Not each line item seperate requirement plan number.
    Requirement type : VSF
    Version                : 05
    Example: I want 10 line items in planning table should create internally only one requirement plan number .
    If anyone know solution help me
    Regards,
    Sadasivam R K

    I hope you must have resolved your query at your end.

  • Creation of production order with reference to sales order

    dear all guru's,
                       i m having a requirement of creating production order with ref to sales order but without changing my old strategy of make to stock.
    regards
    ujwal

    Hi,
    For the purpose of creation of production order with reference to sales order while maintaing MTS strategy you need to maintain Make to stock strategy 40 in strategy group in MRP-3 View of Material Master.
    This is the only Make-to-Stock Strategy which enables you create Production Order against both Sales order as well as Demand / PIR.
    So if your strategy group is already 40 then you need not change it.
    However if you are using any other Make-to - Stock strategy like 10, 11 etc. then it is not possible to create Production Order against Sales Order since they dont consider Sales Order in planning.So you need to change them and set strategy group as 40.
    Hope this helps.
    Revert if you have any doubt.
    Regards,
    Tejas
    Edited by: Tejas  Pujara on Sep 27, 2008 8:50 AM

  • Sales order with reference to PO(STO)

    Dear All
    i have a requirement where production order is booked against sales order,after production order is completed then only i able to do delivery and PGI(allesble to order scenerio).While doing STO sales order has to be created with refernce to PO otherwise i acnnot create delivery and PGI,stock wont get confirmed against purchase order.Please suggest how to create sales order with reference to PO(STO)
    all answers are rewarded
    Regards

    Hi,
    If a sales order is created in SAP R/3, a check is run in SAP APO
    to see if the required stock is available or if a production order
    already exists to cover the requirement. If not, a planned order is
    created in SAP APO to cover the requirement, and the confirmation
    date is the next date on which a block has free capacity to
    produce the relevant product. Scheduling takes place at the end
    of the block, that is to say, at the latest time. Accordingly, a
    planned order can be moved to a later date within the block
    without affecting the confirmed delivery date..
    In ur requirement you have to create a STO based on P.O.
    Open the link for configuration of STO.
    help.sap.com/bestpractices/BBLibrary/Documentation/J53_BB_ConfigGuide_EN_ZH.doc ,
    Create a Sale Order and the delivery date is confirmed based on the Production Order
    Using STO post stock to the required storage location and u can proceed with normal PGI and Billing.
    REvert back if you have any clarification.
    Regards,
    Sarosh

  • How to implement a Copy or Create with Reference scenario

    For business objects, you might want to implement a Copy or Create with Reference scenario. The following procedure describes the UI configuration that you need if you want to place a copy button (in our example on an OWL) that starts a quick activity floorplan (on the same BO = Copy, or a different BO = Create with Reference). Pre-requisie in the target BO: The target BO requires a BO element SourceBOID and a Copy action that reads the SourceBO by SourceBOID by query, and copies the elements from the source to the target BO.
    The UI configuration in the target floor plan is:
    1. Open the QAF floor plan of the target BO (target floor plan).
    2. In the DataModel view of the target floor plan, select the Root entry and select Add Data Field from the context menu. Rename the created data element to OBN_OriginBOID.
    3. Choose the Controller tap, and select INPORTS and choose ADD INPORT from the context menu. A new in-port is created. Rename the in-port, for example to Copy.
    4. In the in-port maintenance form, activate the check box OBN INPORT.
    5. Select the namespace of your solution and the target business object.
    6. In the input field SELECT OPERATION enter Copy. A new select operation is created. The combination of business object name (including namespace), business object node and operation identifies the in-port and therefore the related floor plan as navigation target.
    7. Select the port type package /SAP_BYD_UI/SystemPortTypes.PTP.uicomponent.
    8. In the PARAMETERS section of the form, click the ADD button. Maintain the binding of the created parameter to /Root/OBN_OriginBOID. Based on this configuration, the system will transfer the parameter of the in-port to the element in the data model when the OBN is executed.
    9. In the Properties view, select the drop-down list box of the property EVENTS u2022 ONFIRE. Scroll down and select the entry u2026 NEW EVENT HANDLER u2026. The system starts the maintenance window for event handlers. Rename the event handler to CopyIn.
    10. In the OPERATIONS table of the maintenance window for event handlers, select type: BUSINESS OBJECT OPERATION. In the form below the table select the value CREATE for the input field BUSINESS OBJECT OPERATION TYPE. This operation will create a BO instance in the backend when the OBN is executed.
    11. In the OPERATIONS table, create a new operation of type: DATAOPERATION.  In the configuration of the data operation, select the operation type ASSIGN, source expression /Root/OBN_OriginBOID and target expression /Root/<BO>/OriginBOID.
    12. Create a third operation of type: BUSINESS OBJECT ACTION. Select the Copy action of the target business object and click the BIND button. Note: This action enforces another roundtrip to the backend. The Copy action must be implemented so that it will read the origin BO and copy selected data from the origin to the newly created object.
    13. Test the changes in the preview. If no error message is issued, save and activate the floor plan.
    The following procedure describes the configuration in the source floor plan (e.g. OWL floorplan ):
    1. Open the Source BO OWL floor plan (source floor plan).
    2. In the Designer view, place cursor the on the toolbar area and select ADD u2022 APPLICATION-SPECIFIC BUTTON u2022 MY BUTTON from a context menu. Rename the new button to Copy.
    3. In the Properties view, select the drop-down list box of the property MENU INFORMATION u2022 NAVIGATION. The system launches the maintenance window for OBN configuration.
    4. Select the in-port of the target floor plan by selecting the target business object (with namespace and name) the target business object node and the target operation, and the operation Copy.
    5. Choose the navigation style NEWWINDOW.
    6. Close the OBN configuration maintenance window by clicking the OK button. The system creates the OBN configuration, an out-port, that is used by the OBN configuration, and an event handler that uses the out-port and that is assigned to the button (see Properties view, EVENTS u2022 ONFIRE).
    7. Go to the Controller view and rename the OBN configuration to Copy, the new out port to Copy and the new event handler to CopyOut.
    8. Check that the event handler CopyOut fires the out-port Copy.
    9. In the Parameters section of the out-port maintenance form, click the ADD button. Maintain the binding of the created parameter as /Root/<BO>/<BO>ID. Based on this configuration, the system will transfer the identifier of the selected source BO to the out-port data structure when the OBN is executed.
    10. In the Operations table, select type: FIREOUTPORT. In the form below the table select the out-port CopyOut.
    11. Test the changes in the preview. If no error message is issued, save and activate the floor plan.

    Hi Dries-
    There are no pre-packaged solutions with BADIs since they are, by definition, custom development.  If that's the path you need to go down then consider the following high level alternatives:
    Incorporate custom code into the BPC Write Back BADI.  You can restrict the execution of the BADI using filters on the BADI definition, so that the BADI execution only occurs when a data manager package is called, and only for some defined combination of applications/appsets.  Utilized the standard copy/move functions delivered in Data Manager. When the BADI is called, interrogate each record being processed (table CT_ARRAY) and determine if the record has a value you want to process (i.e. save to the target application).  Skip any record that has a zero value.
    Another alternative is to develop the BADI as custom logic.  Data Manager parameters can be picked up in Script Logic and the values can be sent to the BADI by adding parameters.  Please see an example of parmater use in the "How To" document for Destination App at:
    [EPM How To Guides|https://wiki.sdn.sap.com/wiki/display/BPX/Enterprise%20Performance%20Management%20%28EPM%29%20How-to%20Guides]  > "How-to Desitnation App"
    Regards,
    Sheldon

  • Production order with reference to sales order

    Hi experts,
    I have created one sales order.
    I am getting an error as "sales order has no CO object" while creating production order with reference to that sales order. Can anyone help me on this ?
    Thanks in advance.
    Rgds,
    Parul.

    Dear singh,
    pls check this given by yadav
    T. Code: OKKP - Maintaining Controlloing Area
    Select your Controlling Area and Click: Activate components/control indicators (left-hand Dialog Structure)
    Here, Under Tab: Activate, check Boxes: Sales Order, Cost Objects, etc..
    Check whether Strategy Group is maintained in Material Master (MM02) --> View: MRP3.
    T. Code: VA02/ VA03 --> Tab: Procurement -> Column: RqTy
    There, Check whether requirement type is relevant for MTO.
    More information:
    Req. type: KE (if, Reqmts class: 040 Mke-to-ord.w/o cons. - possible to create Production order)
    Req. type: KEK (If, Reqmts class: 020)
    Req. type: KSV (used for Make to stock - Planning with Assembly Planning Strategy 40 is being used in the MRP3 view of the material)
    Also, Check other relevant settings in:
    SPRO --> IMG --> Sales & Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements
    Best Regards,
    vraj

  • Report/Progm to generate PIRs with reference to Forecast

    Hi Experts,
    I am looking for some report or program that creates Planned Independent Requirements (PIRs) from the Forecast that is already loaded in material master. In our scenario, the forecast is loaded through userexit on some fixed calculations.
    Through MD61, I can create PIRs with reference to this forecast but limited to only one material and location at a time. I need to run this in mass for various materials at different locations.
    Any help on this is appreciated.
    Thanks for looking..
    Rgds/Jay

    Hi,
    For creation of PIR's use - BAPI_REQUIREMENTS_CREATE
    For changing PIR's use - BAPI_REQUIREMENTS_CHANGE
    Regards,
    Vivek

  • Depot  Excise Invoice with reference to Delivery from project

    please understood my requirement
    Normal Depo Sales is like VA01-VL01N-J1IJ----VF01 here whatever excise values captured in J1IJ those values come to the commercial Invoice.
    As per My requirement we are creating Project and while creating sales order we have to assign WBS element.
    now Project -Delivery--Excise Invoice J1IJ
    Sales order -
    Inovice VFO1
    my question is how excise and commercial Invoice values come together.
    regards
    etr

    Hello Amol,
    you can create with reference of the deliveyr document. in J1iin trnsaction you have the option in the header tabs of create from delivery
    enter the delivery and create the excise invocie
    Hope this helps
    Thanks
    akasha

  • Mandatory fields With reference to Material types

    Dear Gurus,
    I need to make few fields as mandatory with reference to material types while creation of the material master data.
    For example:
    For Semi finished and Finished Schedule margin key is required(mandatory)
    For Raw Materials Schedule margin key is optional.
    Regards,
    Siddharth

    Hi
    find  following step to make field mandatory for material type
    Follow the stpes for making field as optional, required entry
    1 click the tab ,(Which is u want to be Required entry )and get the field name by pressing F1 key and then
    2.Go to T.Code: OMSR and enter that field name and get Selection Group
    once you get selection group and field name
    3 Use t.Code: OMS2 and click your material type and in next screen check Field reference ( you have assigned for material type; example :;For ROH material type the Field reference is ROH
    3. Use T.code:OMS9,, Double Click your Field Reference and select field selection Group , & select round box of Required Entry or optional and save
    check following link you will get clear idea [How to configure the fields required for each Material type ?;
    Regards
    Kailas ugale

  • Excise Invoice with reference to Commercial Invoice

    Hello Experts
    My client has third party software. In SD- Order to Invoice cycle is done in that software.
    After Invoice is created the data is interfaced and Invoice is received in SAP.
    Now my doubt is that will it be possible to create the excise invoice with reference to this commercial invoice.and if so, what should I assign in config- Assign Del types to Invoice Types.
    Please advice.
    Best Regards
    Raghu

    Hi
        Your scenario is not very clear to me although i am trying to attempt for the solution. Generally F2 invoice will take care of commercial *** excise invoice requirement. If material is excisable & attracts commercial taxes like CST or VAT you can geit through F2 invoice. You can have print programme developed for the invoicing where heading print will be like "Commercial *** excise invoice".

  • Invoice VF01 with reference to the sales order

    Dear Experts,
    Our business requirement is to book the invoice with reference to the sales order without posting delivery and PGI. Provide me the step by step process to complete this configuration.
    Is that suggestible to change the existing document type which the business is using by creating delivery PGI and Invoice to the document type where invoice booking with reference to sales order or I have to go with the new document type only.
    With Regards
    Uday
    Message was edited by: G Lakshmipathi
    Please dont add such text in your post which is not encouraged in SCN.

    TW Typewriter
    can you help, by creating the entire process in Sandbox and informing uday about the configuration steps?
    At the outset, please refrain posting like this which, being a senior member of SCN, you should be aware of rules where spoon feeding is definitely not encouraged.  Those sort of efforts have to be taken by OP.   This forum is only to guide the people wherever they get stucked. 
    cc: Phanikumar V
    You should also be knowing the forum rules and I thought, you would have expressed like what I said above.
    G. Lakshmipathi

Maybe you are looking for